AKM Semiconductor

AK4122AVQ - 24-Bit 96kHz SRC with DIR | AKM Semiconductor

Référence : AK4122AVQ ✗ Fin de vie
48-LQFP, 7 mm × 7 mm Package Not required in slave mode Speed
MOQ : 1 |

AK4122AVQ Présentation

AKM Semiconductor AK4122AVQ is a one-channel, 24-bit digital audio sample rate converter with an integrated digital audio receiver, supplied in a 48-LQFP surface-mount package measuring 7 mm by 7 mm. The device accepts input sample rates from 8 kHz to 96 kHz and produces output sample rates of 32 kHz, 44.1 kHz, 48 kHz or 96 kHz. Its internal PLL allows operation in slave mode without an external master clock.

A sample rate converter, or SRC, is a digital audio interface device that resamples digital audio data from one clock domain to another. The AK4122AVQ combines this function with a digital audio receiver, or DIR, in one IC. Together, these blocks form part of the broader digital-audio signal chain: digital audio interface IC → sample rate converter → digital audio receiver → audio codec or digital signal processor.

The primary functional characteristics are one-channel processing, 24-bit audio resolution, and operation up to 96 kHz. Input rates cover the commonly used 8 kHz through 96 kHz range, while selectable output rates include 32 kHz, 44.1 kHz, 48 kHz and 96 kHz. An internal phase-locked loop simplifies systems that previously required a separate master-clock source when the converter operates in slave mode.

The AK4122AVQ is intended for digital audio equipment where source and destination clocks differ. Its architecture is based on a digital sample-rate-conversion stage and an integrated DIR rather than an analog conversion path. The DIR receives digital audio data and extracts timing information, while the SRC performs the rate conversion needed to align the incoming stream with the selected output rate.

Typical uses include professional digital audio equipment, consumer audio processors, broadcast and recording interfaces, USB or network-audio bridges, and clock-conversion stages within multichannel audio systems. It is especially relevant when an upstream source produces 8 kHz to 96 kHz data while the downstream audio path requires one of the standard output rates.

PCB implementation requires careful assignment of digital audio data, control signals, clock signals and power according to the manufacturer pin-description table. Decoupling should follow the datasheet's recommended network, while audio-clock and data traces should be routed with controlled impedance and minimized crosstalk to preserve signal integrity.

This product page combines the device's stated conversion rates, digital-audio architecture, package information and practical design considerations. It also distinguishes verified production parameters from specifications that require confirmation in the manufacturer datasheet before schematic release or PCB sign-off.

Alternatives de remplacement direct pour AK4122AVQ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

AK4122AVQ Spécifications

Product Type Digital audio sample rate converter with digital audio receiver
Channel Count 1 channel
Audio Resolution 24 bit
Maximum Sample Rate 96 kHz
Input Sample Rate Range 8 kHz to 96 kHz
Output Sample Rates 32 kHz, 44.1 kHz, 48 kHz or 96 kHz
Internal PLL Yes
External Master Clock Requirement Not required in slave mode
Digital Audio Receiver Integrated DIR
Boîtier 48-LQFP, 7 mm × 7 mm
Nombre de broches 48 pins
Type de montage Surface mount
Statut RoHS RoHS indicated on component PDF listing; certification scope not stated

Guide de configuration des broches du AK4122AVQ 48-lqfp, 7 mm × 7 mm

Configuration des broches du AK4122AVQ (boîtier 48-lqfp, 7 mm × 7 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 48-lqfp, 7 mm × 7 mm pour le AK4122AVQ

Aucune donnée de brochage détaillée disponible pour AK4122AVQ.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

AK4122AVQ convient pour 6 applications: USB Audio Interface Clock Conversion, Network Audio Format Conversion, Professional Digital Audio Interface, Broadcast and Recording Equipment, Consumer Audio Processor, Digital Audio Test and Measurement.

🎧

USB Audio Interface Clock Conversion

The AK4122AVQ fits a USB-audio path when the host stream and downstream codec do not operate at the same sample rate. Its one-channel, 24-bit SRC accepts 8 kHz to 96 kHz inputs and converts them to 32 kHz, 44.1 kHz, 48 kHz or 96 kHz. Place the converter between the digital stream source and the audio-processing stage, while allowing the USB controller to handle protocol and endpoint timing. The internal PLL is useful in slave-mode designs because it can eliminate a separate master-clock source. Confirm the actual supported interface mode, clock polarity and register settings against the manufacturer clocking diagrams before laying out the board.

🌐

Network Audio Format Conversion

The AK4122AVQ is suitable for a network-audio bridge that receives digital audio at one rate and forwards it to a processor operating at another. The converter handles one channel per device and supports input rates from 8 kHz through 96 kHz, with selectable outputs including 44.1 kHz and 48 kHz. Place it at the digital-clock boundary rather than after the final analog amplifier, where it can normalize the sample rate while preserving a one-bit digital signal path. Multichannel network products may require one converter per channel or a device with a wider channel count, so system architecture must be checked before the footprint is committed.

🎧

Professional Digital Audio Interface

In a professional recording or monitoring interface, the AK4122AVQ can bridge digital sources whose clocks differ from the processing engine's domain. Its 24-bit architecture and operation to 96 kHz suit high-resolution audio paths, while the integrated DIR provides a defined receiver function within the same 48-LQFP device. The converter is especially useful when slave-mode operation can simplify master-clock distribution. Engineers should still evaluate channel count, supported audio serial formats, jitter performance and synchronization with the remaining DSP chain using the complete AK4122A datasheet.

📺

Broadcast and Recording Equipment

The AK4122AVQ can support rate conversion within broadcast, recording and studio signal-processing equipment that accepts digital audio at one of eight possible input rates and requires a standardized output rate. For example, a 44.1 kHz source can be translated to 48 kHz, or an 8 kHz voice stream can be moved to 32 kHz. Its internal PLL reduces the need for an external master clock in slave-mode configurations. The surrounding converter should still provide the professional interface's required word-clock, framing, status and monitoring behavior, and its clocking architecture should be reviewed for jitter and lock requirements.

📱

Consumer Audio Processor

The AK4122AVQ is useful in a consumer audio processor that receives digital audio from a source with an incompatible clock and feeds a DAC or digital audio engine with a preferred rate. Its one-channel, 24-bit operation and selectable 32 kHz, 44.1 kHz, 48 kHz or 96 kHz outputs cover common media and voice rates. Using the converter at the digital boundary allows the DAC-side engine to operate at a consistent clock. The integrated digital audio receiver should be configured for the intended audio format, and the supply, jitter and analog-output specifications of the complete signal chain must be reviewed independently.

🖥️

Digital Audio Test and Measurement

The AK4122AVQ can serve as the rate-conversion element in digital-audio test equipment that must compare or route streams at different nominal rates. Its 24-bit processing, 96 kHz maximum rate and integrated PLL provide a defined conversion block between test sources and analyzers. Instrument designs should include controllable clocking, status monitoring and enough test points to observe lock and data validity. Because only one channel is processed, stereo or multichannel analysis may require parallel devices unless the surrounding test architecture multiplexes channels. Use the manufacturer register descriptions to verify indication and error-reporting behavior.

What is the AK4122AVQ?
The AK4122AVQ is a one-channel, 24-bit digital audio sample rate converter with an integrated digital audio receiver. It accepts input sample rates from 8 kHz to 96 kHz and supports output rates of 32 kHz, 44.1 kHz, 48 kHz or 96 kHz. According to the AK4122A family datasheet, the device also includes an internal PLL, allowing slave-mode operation without an external master clock.
What sample rates does the AK4122AVQ support?
The AK4122AVQ accepts input sample rates from 8 kHz to 96 kHz and can generate output rates of 32 kHz, 44.1 kHz, 48 kHz or 96 kHz. The AK4122A family datasheet identifies these as the converter's supported operating rates. This range permits conversion between common voice, music, broadcast and high-resolution audio clock domains.
Does the AK4122AVQ require an external master clock?
No, the AK4122AVQ does not require an external master clock when operating in slave mode because it contains an internal PLL. According to the AK4122A family datasheet, this arrangement simplifies the system clock design. The appropriate external-clock arrangement for master mode and each supported interface configuration should still be confirmed from the complete electrical and clocking sections.
Where can I download the AK4122AVQ datasheet PDF?
The AK4122AVQ datasheet PDF is available through the AK4122A family document listed on the product page. Use the manufacturer document to verify pin assignments, electrical limits, supported interface modes, recommended external components and application circuits before finalizing the design. The document is titled for the AK4122A family because AK4122AVQ is a packaged ordering variant of that device.
Where can I find the AK4122AVQ pinout?
The AK4122AVQ uses a 48-LQFP package, and its complete numbered pin assignment must be taken from the AK4122A manufacturer datasheet. The available product information identifies the device as a 48-LQFP audio sample-rate converter but does not expose a trustworthy pin table. Use the pin-description table, exposed-pad guidance and package drawings in the manufacturer datasheet when laying out the PCB.
What package does the AK4122AVQ use?
The AK4122AVQ is supplied in a 48-LQFP surface-mount package measuring 7 mm by 7 mm. Product listings identify it as a 48-LQFP audio sample-rate converter, while distributor records also identify reel packaging. Confirm the lead pitch, exposed-pad treatment, pin-one orientation and land pattern against the manufacturer package drawing before fabrication.
Can the AK4122AVQ be used for USB and network audio conversion?
The AK4122AVQ can be used in USB or network-audio interfaces whenever the source stream and downstream processor require different digital-audio sample rates. Its one-channel, 24-bit conversion and selectable 32 kHz, 44.1 kHz, 48 kHz or 96 kHz outputs suit clock-domain adaptation. Interface protocol handling, endpoint timing and channel aggregation remain the responsibility of the surrounding USB, network or audio controller.
What can replace the AK4122AVQ?
The AK4122AVQ-L appears in the same AKM LQFP48 family, but the available component information does not establish that its pin assignment, electrical levels and functional behavior are identical. Therefore, it cannot be treated as a confirmed drop-in replacement without an engineering comparison against the manufacturer datasheet. Use the Request a Quote form on this page to discuss sourcing support for the exact MPN and verified alternatives.
Is AK4122AVQ-L a drop-in replacement for AK4122AVQ?
AK4122AVQ-L may share the 48-LQFP mechanical format, but matching the package alone does not prove replacement compatibility. The available family listing states that electrical levels, pin assignment and functional behavior must be checked. A valid drop-in decision requires identical or equivalent pin functions, supply requirements, clocking, audio formats, control registers and acoustic-conversion behavior.
What is the best Asahi Kasei Microdevices equivalent for AK4122AVQ?
AK4122AVQ-L is the closest related AKM ordering variant identified for the AK4122AVQ, but it is not verified as a direct replacement. The available information supports its 48-LQFP packaging while warning that pin assignment, electrical levels and functional behavior determine compatibility. For an equivalent selection, compare the AK4122A datasheet, required sample-rate range, interface format and register map before approving a substitution.
When should I choose the AK4122AVQ for an audio design?
Choose the AK4122AVQ when a design needs one-channel, 24-bit digital-audio rate conversion across an 8 kHz to 96 kHz input range and can use a 32 kHz, 44.1 kHz, 48 kHz or 96 kHz output. It is particularly useful when an internal PLL is preferred over supplying a master clock in slave mode. Multichannel systems should confirm whether one converter per channel or a different architecture is required.
Is the AK4122AVQ suitable for professional audio equipment?
The AK4122AVQ is suitable for digital-audio clock-conversion functions in professional and consumer equipment because it provides 24-bit processing up to 96 kHz with four selectable output rates. Suitability for a finished product also depends on total harmonic distortion, dynamic range, clock jitter behavior, supply range and operating-temperature limits. Confirm those specifications in the manufacturer datasheet for the exact production variant.
What are the key specifications of AK4122AVQ that engineers should know?
The AK4122AVQ combines one-channel, 24-bit sample-rate conversion with an integrated digital audio receiver. Its input range is 8 kHz to 96 kHz, and its selectable outputs are 32 kHz, 44.1 kHz, 48 kHz and 96 kHz. The device uses a 48-LQFP, 7 mm × 7 mm package and includes an internal PLL, so a master clock is not required in slave mode.
How do I design the AK4122AVQ power and clock connections?
Use the manufacturer datasheet for the exact pin names, recommended decoupling capacitors, clock-input topology and external component values. The AK4122AVQ integrates an internal PLL and can operate without an external master clock in slave mode, but the selected operating mode still determines how source and output clocks are generated. Confirm every net against the 48-LQFP pin-description and clocking diagrams.
How can I buy AK4122AVQ online and check its price and lead time?
Use the Request a Quote form on this page to request the current AK4122AVQ price, stock position, lead time and package quantity. The form is the appropriate route for a quote-based purchase because market pricing and availability can change independently of the device's technical specifications. For design review, retain the exact requested MPN and 48-LQFP package designation on the purchase order.
Is AK4122AVQ currently active or obsolete?
The current lifecycle status of the AK4122AVQ has not been confirmed by a manufacturer lifecycle statement. Its appearance in current distributor listings indicates ongoing market availability, but that alone does not establish active, NRND or EOL status. Request lifecycle confirmation through the Request a Quote form on this page before committing a production design that depends on long-term supply.

Données de référence d'ingénierie pour AK4122AVQ — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

The AK4122AVQ is appropriate when a design requires one-channel, 24-bit digital audio sample-rate conversion within an 8 kHz to 96 kHz input range. Its selectable 32 kHz, 44.1 kHz, 48 kHz and 96 kHz outputs make it useful in USB-audio, network-audio, broadcast and professional interface products, particularly when the internal PLL allows slave-mode operation without a separate master clock. Before selecting it, verify supply voltage, temperature range, supported digital audio formats, register compatibility and production availability in the manufacturer datasheet. A one-channel architecture may require multiple devices for stereo or multichannel paths. AK4122AVQ-L is a related family variant with the same LQFP48 format, but matching mechanics alone does not establish drop-in compatibility; compare pin functions, electrical levels and operating behavior before using it as a replacement.

Comparaison avec les alternatives

Paramètre Ce produit
Package 48-LQFP, 7 mm × 7 mm
Brand AKM Semiconductor Inc.
Product Type Digital sample rate converter with integrated DIR
Channel Count 1 channel
Audio Resolution 24 bit
Maximum Sample Rate 96 kHz
Input Sample Rate Range 8 kHz to 96 kHz
Output Sample Rates 32 kHz, 44.1 kHz, 48 kHz or 96 kHz
Internal PLL Yes
External Master Clock Not required in slave mode

Notes de conception

Assign all 48-LQFP nets directly from the manufacturer pin-description table and follow the recommended package land pattern. Keep audio data, bit clock, frame clock and other high-speed clock nets short, and route clocks before deciding on via or test-point locations. Maintain continuous ground-plane return paths beneath clock routes to limit loop area and reduce susceptibility to coupled noise.

Implement the datasheet-recommended decoupling network at the supply and ground pins, placing each capacitor as close as practical to its associated package terminal. Confirm the production variant's supply-voltage range, absolute maximum ratings and sequencing requirements before adding analog or digital loads. If the converter shares a rail with switching circuitry, include filtering and verify the resulting ripple at the device pins rather than relying only on a bulk-capacitor value.

Treat bit clock, frame clock and serial audio data as a coordinated clock-and-data interface. Match trace lengths to the electrical-interface requirements where the datasheet specifies them, avoid unnecessary stubs and provide return vias alongside high-speed traces. Validate the design across all intended sample rates, especially when the source and destination clocks are not frequency-locked.

Do not infer slave-mode compatibility from the presence of an internal PLL without checking the required interface mode. AK4122AVQ supports 8 kHz to 96 kHz input and four listed output rates, but unsupported combinations may require specific mode, divider or filter settings. Validate lock status, serial format, word length and channel configuration in hardware using the documented register values and clocking diagrams.

Informations de conformité

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The component PDF listing indicates RoHS status, but detailed declarations and scope are not stated. REACH, AEC-Q100, lead-free, halogen-free and conflict-minerals status remain unconfirmed.

Données vérifiées le : 2026-11-16 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

AK4122AVQ datasheet AK4122AVQ pinout AK4122AVQ datasheet pdf AK4122AVQ equivalent AK4122AVQ replacement AK4122AVQ cross reference AK4122AVQ footprint AK4122AVQ price AK4122AVQ stock AKM Semiconductor AK4122AVQ AK4122AVQ 48-LQFP pinout AK4122AVQ audio sample rate converter AK4122AVQ USB audio application AK4122AVQ internal PLL slave mode

Composants & termes associés

AKM Semiconductor Inc. AK4122AVQ AK4122A AK4122AVQ-L digital audio sample rate converter SRC digital audio receiver DIR audio interface IC digital audio signal chain phase-locked loop PLL 24-bit audio 96 kHz sample rate slave mode master clock 48-LQFP LQFP package surface-mount package USB audio network audio professional audio equipment broadcast audio RoHS
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ