ATF16V8BQ-10SC - 10ns 250-Gate Flash PLD | Microchip
MPN: ATF16V8BQ-10SC ✓ AktifATF16V8BQ-10SC Genel Bakış
A simple programmable logic device, or SPLD, is a user-programmable semiconductor that combines AND/OR logic functions into a fixed, economical architecture. The ATF16V8B family belongs to the broader hierarchy of PLD, programmable logic, digital logic IC, and semiconductor. It is suited to glue logic, control logic, address decoding, and interface functions where a small FPGA or processor would add unnecessary cost or complexity.
The ATF16V8BQ combines an industry-standard architecture with flash-based, electrically erasable configuration. Each of its eight outputs is allocated eight product terms, allowing the device to emulate many 20-pin PAL devices and common combinatorial logic patterns. The -10 speed grade provides a maximum pin-to-pin delay of 10 ns, while the -SC suffix identifies the commercial-temperature 20-pin SOIC ordering code.
The ATF16V8B architecture uses a simple sum-of-products implementation rather than a LUT-based FPGA fabric. This makes configuration and design entry compact, while the fixed number of product terms provides predictable logic capacity. Because the device is electrically erasable, the programmed configuration can be updated without removing the IC, which supports prototype iteration, production configuration, and automated test processes.
Typical uses include peripheral control, bus decoding, relay and indicator logic, data-routing functions, and replacement of multiple discrete gate networks. The eight-macrocell structure is especially useful when several related Boolean expressions can be consolidated into one package. Logic timing should be evaluated against the 10 ns maximum pin-to-pin delay because interconnect and peripheral delays also contribute to total system latency.
When laying out a board, route clock and control signals away from high-current switching nodes and preserve a continuous ground path beneath the device. Decoupling capacitance should be placed close to the supply and ground pins. Designers should also verify the programmed equations, unused inputs, reset behavior, and output enable requirements in the manufacturer’s pin-description and programming documentation before releasing production firmware.
This product overview combines the manufacturer’s architecture and ordering information with practical guidance for logic design, PCB implementation, and sourcing. It distinguishes the electrically erasable 10 ns commercial SOIC device from related speed, package, and temperature options while highlighting the checks engineers should complete before schematic release.
Drop-in alternatifler için ATF16V8BQ-10SC — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller ATF16V8BQ-10SC (aynı form faktörü ve ayağa oturma) — farklı olan Package, Architecture, Device Type, Maximum Pin-to-Pin Delay.
ATF16V8B-10SC
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ATF16V8BQL-10SC
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
ATF16V8B-15SC
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ATF16V8BQ-15SC
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
ATF16V8BQ-10SC Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | Electrically erasable programmable logic device (PLD) |
| Architecture | 16V8 high-performance flash PLD |
| Macrocells | 8 macrocells |
| Equivalent Gate Capacity | 250 gates |
| Maximum Pin-to-Pin Delay | 10 ns |
| Besleme Gerilimi | 5 V |
| Power Class | Standard power |
| Maximum Inputs | 16 inputs |
| I/O Count | 8 I/Os |
| Product Terms per Output | 8 product terms per output |
| Program Memory Technology | Electrically erasable flash configuration |
| Paket | 20-SOIC |
| Package Width | 7.50 mm |
| Body Width | 0.295 inch |
| Montaj Stili | Surface mount |
| Temperature Grade | Commercial grade |
| Green Package | Green package |
| PAL Emulation | Emulates many 20-pin PAL devices |
ATF16V8BQ-10SC green package Pin Yapısı Kılavuzu
ATF16V8BQ-10SC (green package paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: ATF16V8BQ-10SC.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ATF16V8BQ-10SC için uygundur 6 uygulamas: Peripheral Address Decoding, Industrial Control and Relay Sequencing, Data Routing and Signal Conditioning, Interface Glue Logic, Instrumentation and Measurement Control, Consumer and Communication Accessories.
Peripheral Address Decoding
ATF16V8BQ-10SC is well suited to consolidating several chip-select, register-select, or command-decode equations into one 20-pin device. Eight macrocells provide independent output logic, with eight product terms allocated to each output for straightforward sum-of-products implementation. The 10 ns maximum pin-to-pin delay supports compact decode paths where external PAL devices previously occupied multiple packages. Designers can program the required equations electrically, revise them during debug, and verify unused inputs before release. This approach reduces board area and component count while preserving a straightforward PLD programming workflow.
Önerilen
Industrial Control and Relay Sequencing
ATF16V8BQ-10SC can implement deterministic control sequences, relay-enable interlocks, alarm conditions, and state-transition outputs in industrial equipment. Its 10 ns speed grade allows the programmed logic to respond quickly to sampled control signals, while the eight macrocells support several related Boolean expressions in one package. Electrically erasable flash configuration permits controlled updates during maintenance without socketed parts. Designers should include safe defaults for power-up, disable relay outputs during invalid states, and isolate switching transients from the PLD supply and ground paths.
Önerilen
Data Routing and Signal Conditioning
ATF16V8BQ-10SC can route data or qualify control signals according to Boolean combinations of enable, mode, and status inputs. Eight I/O paths and eight macrocells allow compact muxing, gating, and polarity-conversion functions to share one PLD. Its 10 ns rated delay is useful when the routing decision must occur within a short control interval, although external propagation and interconnect delays must be included in the timing budget. The design should document every product term and input default so unused or floating conditions cannot create unintended switching.
Önerilen
Interface Glue Logic
ATF16V8BQ-10SC is appropriate for adapting one interface format to another through fixed combinational equations, status translation, and command qualification. Its 250-gate capacity and eight product terms per output allow a small collection of logic functions to replace multiple discrete gate packages. The electrically erasable configuration supports rapid board bring-up when interface polarity or timing changes. Engineers should define signal direction and ownership explicitly, especially for I/O pins used as outputs after programming, and should verify pull-state behavior against the manufacturer pin table.
Önerilen
Instrumentation and Measurement Control
ATF16V8BQ-10SC can consolidate trigger, range, mode, and interlock logic in compact instrumentation. The 10 ns maximum pin-to-pin delay provides useful timing margin for short control paths, while eight macrocells can implement multiple independent equations. Flash programming enables repeatable configuration of identical boards and supports engineering changes without socketed devices. For measurement systems, keep sensitive analog and reference circuitry separate from digital switching paths, and treat the PLD timing specification as one component of the complete acquisition-control latency.
Önerilen
Consumer and Communication Accessories
ATF16V8BQ-10SC can implement compact mode selection, key scanning, status encoding, and accessory-control logic in consumer or communication equipment. Its small 20-SOIC footprint and eight-macrocell capacity make it useful when a full programmable logic array would be excessive. The 10 ns grade accommodates short control paths, and electrical erase allows last-minute logic corrections during development. System designers should specify how the device behaves before configuration is valid and avoid relying on automatic I/O states for safety-critical functions.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ATF16V8BQ-10SC — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ATF16V8B-10SC | ATF16V8BQL-10SC | ATF16V8B-15SC | ATF16V8BQ-15SC |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-SOIC | 20-SOIC | 20-SOIC | 20-SOIC | 20-SOIC |
| Maximum Pin-to-Pin Delay | 10 ns | 10 ns | 10 ns | 15 ns | 15 ns |
| Architecture | ATF16V8BQ flash PLD | ATF16V8B electrically erasable PLD | ATF16V8BQL electrically erasable PLD | ATF16V8B electrically erasable PLD | ATF16V8BQ flash PLD |
| Macrocells | 8 macrocells | 8 macrocells | 8 macrocells | 8 macrocells | 8 macrocells |
| Equivalent Gate Capacity | 250 gates | 250 gates | 250 gates | 250 gates | 250 gates |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V |
| Programming Technology | Electrically erasable flash | Electrically erasable flash | Electrically erasable flash | Electrically erasable flash | Electrically erasable flash |
Ana Farklılayıcılar
- Faster rated propagation delay than the 15 ns same-package options (karşılaştırma:ATF16V8B-15SC)
- Direct timing match with the ATF16V8B-10SC branch (karşılaştırma:ATF16V8B-10SC)
- Lower standby demand than the explicitly identified BQL option (karşılaştırma:ATF16V8BQL-10SC)
Tasarım Notları
Place the device-side bypass capacitor directly between the supply and ground pins, with a short, low-inductance connection. Preserve an uninterrupted ground path beneath the SOIC where the board stack-up permits. The ATF16V8BQ-10SC is intended for standard 5 V logic, so validate the complete rail tolerance and sequencing at the board level rather than assuming logic-level tolerances apply.
The 10 ns value is the maximum device pin-to-pin delay, not complete system latency. Include output loading, input threshold crossing, external logic delay, and PCB propagation in each timing budget. For clocked or repeatedly switched control paths, avoid long stubs and keep the clock route away from high-current edges to reduce coupling and false transitions.
Do not assume that a device with the same 16V8 architecture is electrically interchangeable without checking the package suffix and pin descriptions. Verify that inputs are driven during configuration, unused pins are handled as directed, and output-enable polarity matches the external logic. Recompile and validate the programmed equations whenever a different speed-grade family member is considered.
Uyumluluk Bilgisi
Microchip describes the ATF16V8B family as having a green package. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for the exact ATF16V8BQ-10SC ordering code were not established from the available manufacturer and distributor pages.