Microchip Technology

ATF16V8BQ-10SC - 10ns 250-Gate Flash PLD | Microchip

MPN: ATF16V8BQ-10SC ✓ فعال
5 V Vdss 20-SOIC Package Electrically erasable flash configuration Memory
حداقل سفارش: 1 |

ATF16V8BQ-10SC نمای کلی

The Microchip ATF16V8BQ-10SC is a 10 ns high-performance electrically erasable programmable logic device with eight macrocells, up to 16 inputs, eight I/O paths, and a 20-pin SOIC package. It operates from a 5 V supply and provides a 250-gate implementation of a compact SPLD architecture.

A simple programmable logic device, or SPLD, is a user-programmable semiconductor that combines AND/OR logic functions into a fixed, economical architecture. The ATF16V8B family belongs to the broader hierarchy of PLD, programmable logic, digital logic IC, and semiconductor. It is suited to glue logic, control logic, address decoding, and interface functions where a small FPGA or processor would add unnecessary cost or complexity.

The ATF16V8BQ combines an industry-standard architecture with flash-based, electrically erasable configuration. Each of its eight outputs is allocated eight product terms, allowing the device to emulate many 20-pin PAL devices and common combinatorial logic patterns. The -10 speed grade provides a maximum pin-to-pin delay of 10 ns, while the -SC suffix identifies the commercial-temperature 20-pin SOIC ordering code.

The ATF16V8B architecture uses a simple sum-of-products implementation rather than a LUT-based FPGA fabric. This makes configuration and design entry compact, while the fixed number of product terms provides predictable logic capacity. Because the device is electrically erasable, the programmed configuration can be updated without removing the IC, which supports prototype iteration, production configuration, and automated test processes.

Typical uses include peripheral control, bus decoding, relay and indicator logic, data-routing functions, and replacement of multiple discrete gate networks. The eight-macrocell structure is especially useful when several related Boolean expressions can be consolidated into one package. Logic timing should be evaluated against the 10 ns maximum pin-to-pin delay because interconnect and peripheral delays also contribute to total system latency.

When laying out a board, route clock and control signals away from high-current switching nodes and preserve a continuous ground path beneath the device. Decoupling capacitance should be placed close to the supply and ground pins. Designers should also verify the programmed equations, unused inputs, reset behavior, and output enable requirements in the manufacturer’s pin-description and programming documentation before releasing production firmware.

This product overview combines the manufacturer’s architecture and ordering information with practical guidance for logic design, PCB implementation, and sourcing. It distinguishes the electrically erasable 10 ns commercial SOIC device from related speed, package, and temperature options while highlighting the checks engineers should complete before schematic release.

جایگزین‌های drop-in برای ATF16V8BQ-10SC — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ATF16V8BQ-10SC (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Architecture, Device Type, Maximum Pin-to-Pin Delay.

Microchip Technology
Package: 20-SOIC (0.295 inch, 7.50 mm width)
Architecture: 16V8
Maximum Pin-to-Pin Delay: 7.5 ns maximum
مقایسه با ATF16V8BQ-10SC →
Microchip Technology
Device Type: Electrically Erasable Programmable Logic Device (EEPLD)
مقایسه با ATF16V8BQ-10SC →

ATF16V8B-10SC

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Microchip Technology
📦 20-SOIC
Electrically Erasable Programmable Logic Device (EEPLD) · ATF16V8B · 16V8 · 8 macrocells · 250 gates · Up to 16 inputs · 8 I/Os · 10 ns

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ATF16V8BQL-10SC

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 20-SOIC
Same 10 ns speed grade and 20-SOIC package; 0 ns timing difference, while the BQL branch specifies 5 mA standby current and may use a different configuration architecture

📋 جایگزین مرجع (خارج از کاتالوگ)

ATF16V8B-15SC

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Microchip Technology
📦 20-SOIC
Electrically Erasable Programmable Logic Device (EEPLD) · ATF16V8B · 250 gates · 8 macrocells · 16 inputs · 8 I/O outputs · 15 ns · 7.5 ns

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ATF16V8BQ-15SC

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 20-SOIC
Same ATF16V8BQ flash architecture and 20-SOIC package but 15 ns maximum pin-to-pin delay versus 10 ns, a 5 ns or 50% timing difference

📋 جایگزین مرجع (خارج از کاتالوگ)

ATF16V8BQ-10SC حداکثر مقادیر مجاز و مشخصات الکتریکی

Device Type Electrically erasable programmable logic device (PLD)
Architecture 16V8 high-performance flash PLD
Macrocells 8 macrocells
Equivalent Gate Capacity 250 gates
Maximum Pin-to-Pin Delay 10 ns
ولتاژ تغذیه 5 V
Power Class Standard power
Maximum Inputs 16 inputs
I/O Count 8 I/Os
Product Terms per Output 8 product terms per output
Program Memory Technology Electrically erasable flash configuration
بسته‌بندی 20-SOIC
Package Width 7.50 mm
Body Width 0.295 inch
سبک نصب Surface mount
Temperature Grade Commercial grade
Green Package Green package
PAL Emulation Emulates many 20-pin PAL devices

راهنمای پیکربندی پین ATF16V8BQ-10SC green package

پیکربندی پین برای ATF16V8BQ-10SC (پکیج green package). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج green package برای ATF16V8BQ-10SC

داده پین‌آوت تفصیلی موجود نیست برای ATF16V8BQ-10SC.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ATF16V8BQ-10SC مناسب است برای 6 کاربردs: Peripheral Address Decoding, Industrial Control and Relay Sequencing, Data Routing and Signal Conditioning, Interface Glue Logic, Instrumentation and Measurement Control, Consumer and Communication Accessories.

🔧

Peripheral Address Decoding

ATF16V8BQ-10SC is well suited to consolidating several chip-select, register-select, or command-decode equations into one 20-pin device. Eight macrocells provide independent output logic, with eight product terms allocated to each output for straightforward sum-of-products implementation. The 10 ns maximum pin-to-pin delay supports compact decode paths where external PAL devices previously occupied multiple packages. Designers can program the required equations electrically, revise them during debug, and verify unused inputs before release. This approach reduces board area and component count while preserving a straightforward PLD programming workflow.

🏭

Industrial Control and Relay Sequencing

ATF16V8BQ-10SC can implement deterministic control sequences, relay-enable interlocks, alarm conditions, and state-transition outputs in industrial equipment. Its 10 ns speed grade allows the programmed logic to respond quickly to sampled control signals, while the eight macrocells support several related Boolean expressions in one package. Electrically erasable flash configuration permits controlled updates during maintenance without socketed parts. Designers should include safe defaults for power-up, disable relay outputs during invalid states, and isolate switching transients from the PLD supply and ground paths.

🖥️

Data Routing and Signal Conditioning

ATF16V8BQ-10SC can route data or qualify control signals according to Boolean combinations of enable, mode, and status inputs. Eight I/O paths and eight macrocells allow compact muxing, gating, and polarity-conversion functions to share one PLD. Its 10 ns rated delay is useful when the routing decision must occur within a short control interval, although external propagation and interconnect delays must be included in the timing budget. The design should document every product term and input default so unused or floating conditions cannot create unintended switching.

🌐

Interface Glue Logic

ATF16V8BQ-10SC is appropriate for adapting one interface format to another through fixed combinational equations, status translation, and command qualification. Its 250-gate capacity and eight product terms per output allow a small collection of logic functions to replace multiple discrete gate packages. The electrically erasable configuration supports rapid board bring-up when interface polarity or timing changes. Engineers should define signal direction and ownership explicitly, especially for I/O pins used as outputs after programming, and should verify pull-state behavior against the manufacturer pin table.

📡

Instrumentation and Measurement Control

ATF16V8BQ-10SC can consolidate trigger, range, mode, and interlock logic in compact instrumentation. The 10 ns maximum pin-to-pin delay provides useful timing margin for short control paths, while eight macrocells can implement multiple independent equations. Flash programming enables repeatable configuration of identical boards and supports engineering changes without socketed devices. For measurement systems, keep sensitive analog and reference circuitry separate from digital switching paths, and treat the PLD timing specification as one component of the complete acquisition-control latency.

📱

Consumer and Communication Accessories

ATF16V8BQ-10SC can implement compact mode selection, key scanning, status encoding, and accessory-control logic in consumer or communication equipment. Its small 20-SOIC footprint and eight-macrocell capacity make it useful when a full programmable logic array would be excessive. The 10 ns grade accommodates short control paths, and electrical erase allows last-minute logic corrections during development. System designers should specify how the device behaves before configuration is valid and avoid relying on automatic I/O states for safety-critical functions.

خلاصه محصولات پیشنهادی

What is ATF16V8BQ-10SC?
The ATF16V8BQ-10SC is a Microchip 10 ns electrically erasable flash PLD with eight macrocells, up to 16 inputs, eight I/O paths, and a 20-pin SOIC package. According to the manufacturer datasheet Atmel-0364K, its 250-gate architecture can emulate many 20-pin PAL devices and implement compact sum-of-products logic in one IC.
What are the key specifications of ATF16V8BQ-10SC that engineers should know?
The ATF16V8BQ-10SC combines a 10 ns maximum pin-to-pin delay, eight macrocells, eight product terms per output, up to 16 inputs, and eight I/Os in a 20-pin SOIC package. The manufacturer identifies it as a standard-power, 5 V, electrically erasable flash PLD with a 250-gate capacity. These figures define its logic depth, I/O flexibility, and suitability for fixed combinatorial control functions.
What is ATF16V8BQ-10SC used for?
ATF16V8BQ-10SC is used for compact combinatorial control, address decoding, interface glue logic, data routing, and general-purpose digital logic consolidation. Its eight macrocells and eight product terms per output make it most useful when several related Boolean equations can be programmed into one package. The 10 ns speed grade also supports short propagation-delay requirements in control paths.
Where can I download the ATF16V8BQ-10SC datasheet PDF?
The ATF16V8BQ-10SC datasheet PDF is available from Microchip at the official Atmel-0364K document URL. The manufacturer document covers the ATF16V8B, ATF16V8BQ, and ATF16V8BQL families, including their architecture, product-term allocation, ordering options, electrical characteristics, and programming information. Use the pin-description table in that document when assigning PCB signals.
Where can I find the ATF16V8BQ-10SC pinout?
The ATF16V8BQ-10SC pinout is found in the pin-description section and package drawing of manufacturer datasheet Atmel-0364K. The device uses a 20-pin SOIC with 20 pins divided between supply, ground, clock, output-enable, input, and I/O functions. Assign every pin from the package-specific table rather than relying on a generic 16V8 drawing.
Is ATF16V8BQ-10SC electrically erasable?
The ATF16V8BQ-10SC uses electrically erasable flash configuration memory. Its programmed logic can therefore be erased and rewritten without removing the IC from the circuit. According to manufacturer datasheet Atmel-0364K, this simplifies design iteration and permits programmed configurations to be integrated into production, test, and automated programming workflows.
What is the difference between ATF16V8BQ-10SC and ATF16V8B-15PC?
The ATF16V8BQ-10SC has a 10 ns speed grade, commercial-grade ordering, and a 20-SOIC package, while ATF16V8B-15PC is a 15 ns, 20-pin plastic-DIP option. The 10 ns target is 5 ns faster, a 33% reduction in rated propagation delay. Their package forms are not interchangeable without PCB changes, so they are functional alternatives rather than literal drop-in replacements.
When should I choose ATF16V8BQ-10SC over a slower ATF16V8B option?
Choose ATF16V8BQ-10SC when the logic path has a tighter propagation-delay budget than a 15 ns SPLD can satisfy. Its 10 ns maximum pin-to-pin delay is 5 ns lower than the 15 ns ATF16V8B grade. The selection should still account for external gate, wiring, and peripheral delays, because the specified 10 ns value does not represent total board-level latency.
Is ATF16V8BQ-10SC suitable for peripheral interface and decoding logic?
The ATF16V8BQ-10SC is suitable for peripheral interface and decoding logic when the required equations fit within eight macrocells and eight product terms per output. Its electrically erasable flash configuration permits design revisions, while the 10 ns grade supports moderately fast control paths. Confirm signal polarity, clock requirements, output-enable behavior, and unused-pin states in the package pin table.
What can replace ATF16V8BQ-10SC?
ATF16V8B-10SC is the closest same-family SOIC replacement because it retains the 10 ns speed grade and 20-pin surface-mount format. Slower 15 ns SOIC variants can fit many designs, but their rated propagation delay is 5 ns longer. ATF16V8BQ-10JC and ATF16V8B-15PC are not drop-in choices unless their package drawings and pin assignments are verified, because their ordering suffixes indicate different package options.
Is ATF16V8BQ-10SC the same as ATF16V8B-10SC?
The ATF16V8BQ-10SC and ATF16V8B-10SC share the central ATF16V8B architecture, 10 ns speed grade, and 20-pin SOIC format. The Q designation identifies the flash-programmed ATF16V8BQ branch of the family. For a new or replacement design, verify the exact ordering code, programming file compatibility, temperature grade, and pin description against the manufacturer documentation.
What is the best Microchip equivalent for ATF16V8BQ-10SC?
The best same-manufacturer equivalent is ATF16V8B-10SC because it preserves the 10 ns speed grade and 20-SOIC package used by ATF16V8BQ-10SC. It offers a 0 ns difference in the stated maximum pin-to-pin delay and therefore provides the closest timing match. Final equivalence still depends on checking configuration-file support and device-revision requirements.
Where to buy ATF16V8BQ-10SC online?
Use the Request a Quote form on this page to request ATF16V8BQ-10SC availability, current commercial terms, and the required packaging quantity. The manufacturer documentation identifies the exact 20-SOIC ordering code, while the request process avoids publishing a static price that may change with quantity, inventory, or market conditions. State the required quantity and date code needs clearly in the request.
What is the price of ATF16V8BQ-10SC?
The current ATF16V8BQ-10SC commercial price depends on order quantity, inventory, and purchasing terms. Submit the required quantity through the Request a Quote form on this page for a current quotation. The request should identify the complete ATF16V8BQ-10SC ordering code so that the 10 ns commercial-grade 20-SOIC device is quoted without a package or speed-grade substitution.
What is the lead time and stock status of ATF16V8BQ-10SC?
Request the current lead time and stock status through the Request a Quote form on this page. Include the required quantity, target delivery date, permitted date-code policy, and whether tape-and-reel, cut-tape, or another approved presentation is needed. This establishes an order-specific commitment rather than relying on a potentially outdated general stock statement.
Is ATF16V8BQ-10SC compliant with RoHS and REACH?
Use the manufacturer’s current product and material-compliance documentation to confirm the exact ATF16V8BQ-10SC status. The manufacturer product page describes the family as having a green package, but that designation alone does not establish every regional compliance declaration. Request the applicable RoHS and REACH declaration for the complete ordering code when compliance documentation is a purchasing requirement.

داده‌های مرجع مهندسی برای ATF16V8BQ-10SC — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose ATF16V8BQ-10SC for a 20-SOIC design requiring a 10 ns flash PLD with eight macrocells and up to 16 inputs. ATF16V8B-10SC is the closest same-family option when its device revision, programming-file support, and exact ordering requirements meet the product specification. ATF16V8BQL-10SC offers the same stated speed and package but should be selected specifically for its 5 mA standby characteristic and confirmed architecture compatibility. The 15 ns ATF16V8B-15SC and ATF16V8BQ-15SC choices preserve the SOIC footprint and logic capacity, but their 5 ns slower rating can break timing closure. Alternatives with different suffixes, such as ATF16V8BQ-10JC or ATF16V8B-15PC, should not be treated as drop-in parts until their package drawings and pin assignments are verified.

مقایسه با جایگزین‌ها

پارامتر این محصول ATF16V8B-10SC ATF16V8BQL-10SC ATF16V8B-15SC ATF16V8BQ-15SC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 20-SOIC 20-SOIC 20-SOIC 20-SOIC 20-SOIC
Maximum Pin-to-Pin Delay 10 ns 10 ns 10 ns 15 ns 15 ns
Architecture ATF16V8BQ flash PLD ATF16V8B electrically erasable PLD ATF16V8BQL electrically erasable PLD ATF16V8B electrically erasable PLD ATF16V8BQ flash PLD
Macrocells 8 macrocells 8 macrocells 8 macrocells 8 macrocells 8 macrocells
Equivalent Gate Capacity 250 gates 250 gates 250 gates 250 gates 250 gates
Supply Voltage 5 V 5 V 5 V 5 V 5 V
Programming Technology Electrically erasable flash Electrically erasable flash Electrically erasable flash Electrically erasable flash Electrically erasable flash

تفاوت‌های کلیدی

  • Faster rated propagation delay than the 15 ns same-package options (در مقابلATF16V8B-15SC)
  • Direct timing match with the ATF16V8B-10SC branch (در مقابلATF16V8B-10SC)
  • Lower standby demand than the explicitly identified BQL option (در مقابلATF16V8BQL-10SC)

یادداشت‌های طراحی

Place the device-side bypass capacitor directly between the supply and ground pins, with a short, low-inductance connection. Preserve an uninterrupted ground path beneath the SOIC where the board stack-up permits. The ATF16V8BQ-10SC is intended for standard 5 V logic, so validate the complete rail tolerance and sequencing at the board level rather than assuming logic-level tolerances apply.

The 10 ns value is the maximum device pin-to-pin delay, not complete system latency. Include output loading, input threshold crossing, external logic delay, and PCB propagation in each timing budget. For clocked or repeatedly switched control paths, avoid long stubs and keep the clock route away from high-current edges to reduce coupling and false transitions.

Do not assume that a device with the same 16V8 architecture is electrically interchangeable without checking the package suffix and pin descriptions. Verify that inputs are driven during configuration, unused pins are handled as directed, and output-enable polarity matches the external logic. Recompile and validate the programmed equations whenever a different speed-grade family member is considered.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Microchip describes the ATF16V8B family as having a green package. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for the exact ATF16V8BQ-10SC ordering code were not established from the available manufacturer and distributor pages.

تاریخ تأیید داده‌ها: 2026-11-11 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ATF16V8BQ-10SC ATF16V8BQ-10SC datasheet ATF16V8BQ-10SC pinout ATF16V8BQ-10SC datasheet pdf ATF16V8BQ-10SC equivalent ATF16V8BQ-10SC replacement ATF16V8BQ-10SC cross reference ATF16V8BQ-10SC footprint Microchip ATF16V8BQ-10SC ATF16V8BQ-10SC price ATF16V8BQ-10SC stock ATF16V8BQ-10SC 20-SOIC ATF16V8BQ-10SC 10ns PLD ATF16V8BQ-10SC vs ATF16V8B-10SC ATF16V8BQ-10SC address decoding

قطعات و اصطلاحات مرتبط

Microchip Technology ATF16V8BQ-10SC ATF16V8B-10SC ATF16V8BQL-10SC ATF16V8B-15SC ATF16V8BQ-15SC ATF16V8BQ-10JC ATF16V8B-15PC Programmable Logic Device PLD Simple Programmable Logic Device SPLD PAL Electrically Erasable Flash PLD 16V8 Architecture 8 Macrocells 250-Gate Capacity 10 ns Maximum Pin-to-Pin Delay 20-SOIC SOIC Surface Mount 5 V Logic Peripheral Address Decoding Interface Glue Logic Industrial Control Logic Atmel-0364K RoHS REACH
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ