ATF22LV10C-10XU - 10ns Low-Voltage EEPLD | Microchip
MPN: ATF22LV10C-10XU ✓ AktifATF22LV10C-10XU Genel Bakış
An EEPLD is a user-programmable semiconductor that combines fixed logic-array architecture with nonvolatile configuration memory. The ATF22LV10C belongs to the SPLD family of programmable logic devices and provides a compact alternative to a collection of individual AND, OR, and flip-flop gates. Its 22V10 architecture uses a variable product-term structure, with each output receiving approximately 8 to 16 product terms and additional product terms supporting synchronous and asynchronous reset.
Key features include a maximum propagation delay of 10 ns, a 10 ns speed designation, 10 macrocells, approximately 500 gates, and a user-controlled power-down mode with 10 μA typical standby current. The device supports the 3.3 V-oriented ATF22LV10C family and is identified as an industrial-temperature component in distributor catalog data. Its nonvolatile flash configuration allows logic designs to be reprogrammed without removing the device from the circuit.
The variable product-term architecture allows the same physical device to implement multiple Boolean functions, control logic, decoding, and registered state-machine functions. The ATF22LV10C architecture is compatible with the classic 22V10 pin arrangement, making it useful for consolidating small amounts of glue logic. Microchip documentation also identifies the ATF22LV10C as a direct replacement for the corresponding Xilinx XCR22LV10 family where package and device requirements are matched.
Typical applications include industrial control-panel decoding, peripheral-interface qualification, legacy equipment upgrades, address decoding, keyboard or display control, compact control sequencers, and system-management logic. Its 10 ns access performance is appropriate when logic propagation must remain short relative to surrounding control and interface circuits.
When laying out a design, preserve the 22V10-compatible pin arrangement and provide the device with clean supply decoupling. Place programming-interface and decoupling connections according to the manufacturer's recommended schematic, and account for signal propagation, setup, and hold requirements around registered outputs. Verify the programmed configuration in-system before treating the circuit as production-ready.
This product page combines the manufacturer's architecture information with distributor package and speed details, pin-compatible same-family options, and practical implementation guidance. It is intended to help engineers identify the correct programming device, plan a PCB revision, and evaluate whether the ATF22LV10C architecture satisfies legacy 22V10 logic requirements.
Drop-in alternatifler için ATF22LV10C-10XU — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
ATF22LV10C-15XU
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
ATF22LV10C-20XU
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
ATF22LV10C-25XU
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
ATF22LV10C-10XU Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Simple Programmable Logic Device (SPLD) |
| Programmable Logic Architecture | 22V10 |
| Configuration Memory | Electrically Erasable Flash Memory |
| Macrocells | 10 macrocells |
| Equivalent Gate Count | Approximately 500 gates |
| User I/O Count | 10 user I/Os |
| Maximum Propagation Delay | 10 ns |
| Maximum Operating Frequency | 83.3 MHz |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Nominal Supply Voltage | 3.3 V |
| Power-Down Standby Current | 10 μA typical |
| Output Product Terms | 8 to 16 product terms per output |
| Reset Product Terms | 2 additional product terms for synchronous reset and asynchronous reset |
| Programming Interface | In-System Programming (ISP) |
| Paket | 24-pin TSSOP |
| Temperature Grade | Industrial temperature grade |
| Technology | Low-voltage CMOS |
| RoHS Durumu | unknown |
| REACH Status | unknown |
ATF22LV10C-10XU 24-pin tssop Pin Yapısı Kılavuzu
ATF22LV10C-10XU (24-pin tssop paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: ATF22LV10C-10XU.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ATF22LV10C-10XU için uygundur 6 uygulamas: Industrial Control-Logic Consolidation, Legacy Equipment Logic Upgrade, Address and Command Decoding, Power-Down System Management, Peripheral Interface Qualification, Compact Control Sequencer.
Industrial Control-Logic Consolidation
The ATF22LV10C-10XU is well suited to consolidating small industrial control functions that would otherwise occupy several gate arrays and flip-flops. Its 10 macrocells, approximately 500-gate capacity, and 10 ns maximum propagation delay provide adequate timing margin for decoding, interlock logic, and command routing around slower sensors or actuators. The electrically erasable flash configuration preserves the implemented logic through power loss, while in-system programming supports design revisions without replacing the IC. Because the device operates from 3.0 V to 5.5 V, it can sit beside 3.3 V control electronics when its I/O levels meet the system requirements.
Önerilen
Legacy Equipment Logic Upgrade
The ATF22LV10C-10XU can replace multiple discrete gates in legacy equipment where a 22V10-compatible board pattern already exists. The 24-pin TSSOP package and 10 ns grade support direct PCB-level modernization without introducing a large programmable-logic device, and nonvolatile flash configuration avoids repeating a fuse-programming operation after every power cycle. Microchip documentation identifies the ATF22LV10C as a drop-in replacement for the corresponding XCR22LV10 family, subject to matching package and pin requirements. Engineers should compare the existing device marking, supply voltage, configuration file, and timing before approving the substitution.
Önerilen
Address and Command Decoding
For peripheral address decoding and command qualification, the ATF22LV10C-10XU provides ten macrocells and 8 to 16 product terms per output in a compact 24-pin TSSOP. Its 10 ns propagation delay is short enough for many asynchronous control paths and allows decoded commands to be registered when system timing requires synchronized outputs. Flash-based configuration also allows decode tables to be updated during production or field maintenance. The design should include deliberate default states for invalid commands and should account for output setup and hold timing at the connected bus or peripheral.
Önerilen
Power-Down System Management
The ATF22LV10C-10XU is useful in system-management logic that must remain programmable but consume little power during idle periods. Its user-controlled power-down mode provides 10 μA typical standby current, allowing the logic to be disabled while the surrounding system is inactive and reactivated when management functions are required. The device remains compatible with the broader 3.0 V to 5.5 V ATF22LV10C operating range, enabling deployment in mixed 3.3 V and 5 V systems where signal compatibility has been verified. Designers should define the state of every connected output before entering power-down to prevent unintended control actions.
Önerilen
Peripheral Interface Qualification
The ATF22LV10C-10XU can implement qualification logic between slower system blocks, such as request acknowledgment, interrupt routing, and protocol state sequencing. With a 10 ns grade, it can accommodate short combinational qualification paths while registered outputs provide controlled transitions where required. The 22V10 variable product-term structure permits each output to use 8 to 16 product terms, giving designers more flexibility than a basic fixed array for mixed combinational and registered functions. Its industrial-temperature catalog designation makes it appropriate for many embedded control environments, subject to the absolute voltage and temperature limits in the datasheet.
Önerilen
Compact Control Sequencer
A small state machine or sequential controller can be implemented in the ATF22LV10C-10XU when its 10 macrocells are sufficient, using the family's registered-output and reset resources for deterministic transitions. The 10 ns propagation delay supports faster sequencing than many older fuse-based PAL devices, and electrically erasable flash permits iteration during development without irreversible programming. In a control panel, test fixture, or instrument, this device can consolidate decode and sequencing logic while retaining a small footprint. Engineers should verify worst-case clock requirements, reset behavior, and registered-output timing during the implementation review.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ATF22LV10C-10XU — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ATF22LV10C-15XU | ATF22LV10C-20XU | ATF22LV10C-25XU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-pin TSSOP | 24-pin TSSOP | 24-pin TSSOP | 24-pin TSSOP |
| Architecture | 22V10 | 22V10 | 22V10 | 22V10 |
| Maximum Propagation Delay | 10 ns | 15 ns | 20 ns | 25 ns |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| User I/O Count | 10 user I/Os | 10 user I/Os | 10 user I/Os | 10 user I/Os |
| Configuration Memory | Electrically Erasable Flash Memory | Electrically Erasable Flash Memory | Electrically Erasable Flash Memory | Electrically Erasable Flash Memory |
| Programming Interface | In-System Programming | In-System Programming | In-System Programming | In-System Programming |
| Standby Current | 10 μA typical | 10 μA typical | 10 μA typical | 10 μA typical |
Ana Farklılayıcılar
- Faster timing grade within the same 22V10 TSSOP family (karşılaştırma:ATF22LV10C-15XU)
- Lower propagation delay for control and decode paths (karşılaştırma:ATF22LV10C-20XU)
- Timing margin advantage over the slowest listed family grade (karşılaştırma:ATF22LV10C-25XU)
Tasarım Notları
Use the manufacturer datasheet's 24-pin TSSOP land pattern and pin-description table to assign the supply, ground, configuration, clock, input, and output nets. Keep the ISP or programming connections accessible if configuration updates are expected after PCB assembly. The ATF22LV10C architecture is based on the classic 22V10 arrangement, but a similarly named device does not guarantee identical programming or power pins. Cross-check the exact ordering code and package drawing against the PCB footprint before fabrication.
Place the supply bypass capacitor as close as practical to the device power and ground pins, following the value and layout specified in the Microchip ATF22LV10C datasheet. Keep the power-down path compatible with the 10 μA typical standby specification; long supply traces or leakage from connected I/O circuits can prevent the system from reaching the intended idle state. Confirm that every output has a defined level while the programmable logic is disabled, particularly when it controls reset or enable signals.
Analyze the slowest implemented logic path rather than assuming that the 10 ns grade alone guarantees system timing. Account for macrocell product-term delay, interconnect delay, output setup and hold requirements, and the acquisition behavior of the receiving circuit. The ATF22LV10C provides synchronous and asynchronous reset product terms, but the choice between them affects timing and must be reflected in the configuration file and system-reset architecture.
Uyumluluk Bilgisi
The manufacturer and distributor product information identifies the ATF22LV10C as a CMOS programmable logic device but does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements.