Microchip Technology

ATF22LV10C-10XU - 10ns Low-Voltage EEPLD | Microchip

MPN: ATF22LV10C-10XU ✓ فعال
3.0 V to 5.5 V Vdss 10 μA typical Id 24-pin TSSOP Package 83.3 MHz Speed Electrically Erasable Flash Memory Memory
حداقل سفارش: 1 |

ATF22LV10C-10XU نمای کلی

The Microchip Technology ATF22LV10C-10XU is a 10 ns, low-voltage electrically erasable programmable logic device with 10 macrocells, approximately 500 gates, and 10 user I/Os in a 24-pin TSSOP package. It operates across the ATF22LV10C family's 3.0 V to 5.5 V range and supports in-system programming through electrically erasable flash memory.

An EEPLD is a user-programmable semiconductor that combines fixed logic-array architecture with nonvolatile configuration memory. The ATF22LV10C belongs to the SPLD family of programmable logic devices and provides a compact alternative to a collection of individual AND, OR, and flip-flop gates. Its 22V10 architecture uses a variable product-term structure, with each output receiving approximately 8 to 16 product terms and additional product terms supporting synchronous and asynchronous reset.

Key features include a maximum propagation delay of 10 ns, a 10 ns speed designation, 10 macrocells, approximately 500 gates, and a user-controlled power-down mode with 10 μA typical standby current. The device supports the 3.3 V-oriented ATF22LV10C family and is identified as an industrial-temperature component in distributor catalog data. Its nonvolatile flash configuration allows logic designs to be reprogrammed without removing the device from the circuit.

The variable product-term architecture allows the same physical device to implement multiple Boolean functions, control logic, decoding, and registered state-machine functions. The ATF22LV10C architecture is compatible with the classic 22V10 pin arrangement, making it useful for consolidating small amounts of glue logic. Microchip documentation also identifies the ATF22LV10C as a direct replacement for the corresponding Xilinx XCR22LV10 family where package and device requirements are matched.

Typical applications include industrial control-panel decoding, peripheral-interface qualification, legacy equipment upgrades, address decoding, keyboard or display control, compact control sequencers, and system-management logic. Its 10 ns access performance is appropriate when logic propagation must remain short relative to surrounding control and interface circuits.

When laying out a design, preserve the 22V10-compatible pin arrangement and provide the device with clean supply decoupling. Place programming-interface and decoupling connections according to the manufacturer's recommended schematic, and account for signal propagation, setup, and hold requirements around registered outputs. Verify the programmed configuration in-system before treating the circuit as production-ready.

This product page combines the manufacturer's architecture information with distributor package and speed details, pin-compatible same-family options, and practical implementation guidance. It is intended to help engineers identify the correct programming device, plan a PCB revision, and evaluate whether the ATF22LV10C architecture satisfies legacy 22V10 logic requirements.

جایگزین‌های drop-in برای ATF22LV10C-10XU — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

ATF22LV10C-15XU

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 24-pin TSSOP
Maximum propagation delay increases from 10 ns to 15 ns, a 50% increase; package, voltage family, macrocell count, and programming architecture remain the same.

📋 جایگزین مرجع (خارج از کاتالوگ)

ATF22LV10C-20XU

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 24-pin TSSOP
Maximum propagation delay increases from 10 ns to 20 ns, a 100% increase; package, voltage family, macrocell count, and programming architecture remain the same.

📋 جایگزین مرجع (خارج از کاتالوگ)

ATF22LV10C-25XU

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 24-pin TSSOP
Maximum propagation delay increases from 10 ns to 25 ns, a 150% increase; package, voltage family, macrocell count, and programming architecture remain the same.

📋 جایگزین مرجع (خارج از کاتالوگ)

ATF22LV10C-10XU حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Simple Programmable Logic Device (SPLD)
Programmable Logic Architecture 22V10
Configuration Memory Electrically Erasable Flash Memory
Macrocells 10 macrocells
Equivalent Gate Count Approximately 500 gates
User I/O Count 10 user I/Os
Maximum Propagation Delay 10 ns
Maximum Operating Frequency 83.3 MHz
Supply Voltage Range 3.0 V to 5.5 V
Nominal Supply Voltage 3.3 V
Power-Down Standby Current 10 μA typical
Output Product Terms 8 to 16 product terms per output
Reset Product Terms 2 additional product terms for synchronous reset and asynchronous reset
Programming Interface In-System Programming (ISP)
بسته‌بندی 24-pin TSSOP
Temperature Grade Industrial temperature grade
Technology Low-voltage CMOS
وضعیت RoHS unknown
REACH Status unknown

راهنمای پیکربندی پین ATF22LV10C-10XU 24-pin tssop

پیکربندی پین برای ATF22LV10C-10XU (پکیج 24-pin tssop). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 24-pin tssop برای ATF22LV10C-10XU

داده پین‌آوت تفصیلی موجود نیست برای ATF22LV10C-10XU.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ATF22LV10C-10XU مناسب است برای 6 کاربردs: Industrial Control-Logic Consolidation, Legacy Equipment Logic Upgrade, Address and Command Decoding, Power-Down System Management, Peripheral Interface Qualification, Compact Control Sequencer.

🏭

Industrial Control-Logic Consolidation

The ATF22LV10C-10XU is well suited to consolidating small industrial control functions that would otherwise occupy several gate arrays and flip-flops. Its 10 macrocells, approximately 500-gate capacity, and 10 ns maximum propagation delay provide adequate timing margin for decoding, interlock logic, and command routing around slower sensors or actuators. The electrically erasable flash configuration preserves the implemented logic through power loss, while in-system programming supports design revisions without replacing the IC. Because the device operates from 3.0 V to 5.5 V, it can sit beside 3.3 V control electronics when its I/O levels meet the system requirements.

🔧

Legacy Equipment Logic Upgrade

The ATF22LV10C-10XU can replace multiple discrete gates in legacy equipment where a 22V10-compatible board pattern already exists. The 24-pin TSSOP package and 10 ns grade support direct PCB-level modernization without introducing a large programmable-logic device, and nonvolatile flash configuration avoids repeating a fuse-programming operation after every power cycle. Microchip documentation identifies the ATF22LV10C as a drop-in replacement for the corresponding XCR22LV10 family, subject to matching package and pin requirements. Engineers should compare the existing device marking, supply voltage, configuration file, and timing before approving the substitution.

🖥️

Address and Command Decoding

For peripheral address decoding and command qualification, the ATF22LV10C-10XU provides ten macrocells and 8 to 16 product terms per output in a compact 24-pin TSSOP. Its 10 ns propagation delay is short enough for many asynchronous control paths and allows decoded commands to be registered when system timing requires synchronized outputs. Flash-based configuration also allows decode tables to be updated during production or field maintenance. The design should include deliberate default states for invalid commands and should account for output setup and hold timing at the connected bus or peripheral.

⚡

Power-Down System Management

The ATF22LV10C-10XU is useful in system-management logic that must remain programmable but consume little power during idle periods. Its user-controlled power-down mode provides 10 μA typical standby current, allowing the logic to be disabled while the surrounding system is inactive and reactivated when management functions are required. The device remains compatible with the broader 3.0 V to 5.5 V ATF22LV10C operating range, enabling deployment in mixed 3.3 V and 5 V systems where signal compatibility has been verified. Designers should define the state of every connected output before entering power-down to prevent unintended control actions.

📡

Peripheral Interface Qualification

The ATF22LV10C-10XU can implement qualification logic between slower system blocks, such as request acknowledgment, interrupt routing, and protocol state sequencing. With a 10 ns grade, it can accommodate short combinational qualification paths while registered outputs provide controlled transitions where required. The 22V10 variable product-term structure permits each output to use 8 to 16 product terms, giving designers more flexibility than a basic fixed array for mixed combinational and registered functions. Its industrial-temperature catalog designation makes it appropriate for many embedded control environments, subject to the absolute voltage and temperature limits in the datasheet.

🧩

Compact Control Sequencer

A small state machine or sequential controller can be implemented in the ATF22LV10C-10XU when its 10 macrocells are sufficient, using the family's registered-output and reset resources for deterministic transitions. The 10 ns propagation delay supports faster sequencing than many older fuse-based PAL devices, and electrically erasable flash permits iteration during development without irreversible programming. In a control panel, test fixture, or instrument, this device can consolidate decode and sequencing logic while retaining a small footprint. Engineers should verify worst-case clock requirements, reset behavior, and registered-output timing during the implementation review.

What are the key specifications of ATF22LV10C-10XU that engineers should know?
The ATF22LV10C-10XU is a 10 ns, 3.3 V, 10-macrocell EEPLD with approximately 500 gates, 10 user I/Os, and a 24-pin TSSOP package. According to the Microchip ATF22LV10C datasheet, the device supports 3.0 V to 5.5 V operation, uses electrically erasable flash memory for configuration, and provides a user-controlled power-down mode with 10 μA typical standby current. The variable product-term architecture assigns 8 to 16 product terms to each output and includes additional terms for synchronous and asynchronous reset.
Where can I download the ATF22LV10C-10XU datasheet PDF?
The official ATF22LV10C-10XU datasheet PDF is available from Microchip Technology at the document link published on this page. The manufacturer document identifies the device as a low-voltage, user-controlled zero-power CMOS PLD and explains its electrically erasable flash configuration, 10 μA typical power-down current, variable product-term architecture, and operating characteristics. Use the manufacturer's document for the authoritative pin descriptions, timing diagrams, recommended decoupling, and programming procedure.
Where can I find the ATF22LV10C-10XU pinout?
Use the pin-description table and package drawing in the Microchip ATF22LV10C manufacturer datasheet to locate the ATF22LV10C-10XU pinout. The distributor record identifies the target package as 24-pin TSSOP, while the complete numbered pin-to-signal assignment is established by the 22V10 datasheet rather than by the abbreviated catalog listing. Check the supply, ground, configuration, clock, output, and programming pins against the package drawing before routing the PCB.
What is ATF22LV10C-10XU and where does it fit in programmable-logic systems?
The ATF22LV10C-10XU is a 22V10-architecture simple programmable logic device that replaces small networks of conventional gates with nonvolatile, user-programmable logic. According to the Microchip product page, it is a CMOS PLD using electrically erasable flash memory and operating from 3.0 V to 5.5 V. It is suitable when a design needs reconfigurable decode logic, control functions, or registered state logic without moving to a larger CPLD or FPGA.
What is the propagation delay and operating frequency of ATF22LV10C-10XU?
The ATF22LV10C-10XU has a 10 ns maximum propagation-delay designation, and a distributor technical listing identifies a maximum operating frequency of 83.3 MHz. These figures should not be treated as interchangeable in every design: the applicable path delay includes the selected logic implementation, while the frequency rating describes the device's stated operating capability. Consult the Microchip ATF22LV10C datasheet for the relevant AC timing table and test conditions.
How much standby current does ATF22LV10C-10XU use in power-down mode?
The ATF22LV10C-10XU uses 10 μA typical current in its user-controlled power-down mode. According to the Microchip ATF22LV10C datasheet, this feature is intended to manage total system power without sacrificing operating speed. Use the power-down control in designs where the logic can be disabled between infrequent operations, while confirming that all downstream signals remain in valid states throughout the transition.
What can replace the ATF22LV10C-10XU on the same PCB?
The closest drop-in choices are other ATF22LV10C speed grades that retain the 24-pin TSSOP arrangement and the same 22V10 architecture. ATF22LV10C-15XU, ATF22LV10C-20XU, and ATF22LV10C-25XU preserve the package and logic configuration method but trade maximum propagation delay for a slower 15 ns, 20 ns, or 25 ns grade. Microchip documentation also describes the ATF22LV10C family as compatible with the corresponding XCR22LV10 devices, but the package must be verified before substitution.
Is ATF22LV10C-10XU the same as ATF22V10C-10XU?
No. The ATF22LV10C-10XU belongs to the 3.3 V low-voltage ATF22LV10C family, whereas ATF22V10C-10XU is the 5 V-oriented ATF22V10C family. Their 22V10 architectures and similarly named packages do not make them electrically interchangeable across their full operating ranges. Microchip documentation states that ATF22LV10C devices replace the XCR22LV10 family and ATF22V10C devices replace the XCR22V10 family, keeping the voltage-specific families separate.
When should I choose ATF22LV10C-10XU over a slower ATF22LV10C grade?
Choose the ATF22LV10C-10XU when timing margin is more important than minimizing propagation delay cost differences. Its 10 ns grade provides a shorter delay than the 15 ns, 20 ns, and 25 ns family alternatives while retaining the same 24-pin TSSOP footprint and nonvolatile flash configuration. Select a slower grade when the surrounding circuit does not require 10 ns performance and timing closure has adequate margin.
Is ATF22LV10C-10XU suitable for industrial control and interface logic?
The ATF22LV10C-10XU is suitable for compact industrial control, decoding, and interface-support logic when the selected board operates within the device's supported voltage and temperature conditions. Distributor catalog data identifies the part as an industrial-temperature 3.3 V device, and the ATF22LV10C family operates across 3.0 V to 5.5 V. Its 10 ns speed and nonvolatile flash configuration support deterministic logic replacement and in-system updates.
ATF22LV10C-10XU vs ATF22LV10C-15XU: which is better for control logic?
The ATF22LV10C-10XU is better when control paths require lower propagation delay, while ATF22LV10C-15XU may be sufficient when timing margin permits the slower grade. Both retain the same 24-pin TSSOP package and ATF22LV10C configuration architecture according to the family naming and comparison data. Base the decision on the worst-case path, setup and hold requirements, and operating conditions rather than selecting only by the nominal delay label.
What is the best Microchip drop-in replacement for ATF22LV10C-10XU?
A speed-grade change within the ATF22LV10C-10XU package family is the most direct Microchip drop-in path: ATF22LV10C-15XU offers a 15 ns grade, ATF22LV10C-20XU offers a 20 ns grade, and ATF22LV10C-25XU offers a 25 ns grade. These alternatives preserve the 24-pin TSSOP footprint and 22V10 architecture, but each increases maximum propagation delay by 5 ns, 10 ns, or 15 ns relative to the target.
Where can I buy ATF22LV10C-10XU and check current availability?
Use the Request a Quote form on this page to ask for ATF22LV10C-10XU availability, current lead time, minimum order quantity, and delivery options. The manufacturer product page and distributor catalog record confirm the exact 24-pin TSSOP orderable MPN, but availability and commercial terms can change. Include the target MPN and the required production quantity in the request to obtain an actionable quotation.
What is the price of ATF22LV10C-10XU?
The current commercial price for ATF22LV10C-10XU is obtained through the Request a Quote form on this page. The form allows engineers to request quantity pricing, stock status, lead time, and packaging information without relying on a static listing value. Quote pricing is preferable for legacy programmable-logic inventory because component availability, minimum order quantity, and condition requirements can materially affect procurement.
What is the lead time and stock status for ATF22LV10C-10XU?
Request the current ATF22LV10C-10XU lead time and stock status through the Request a Quote form on this page. The exact 24-pin TSSOP device is listed by Microchip and major distributors, but a listing alone does not guarantee current stock, production allocation, or a ship date for the requested quantity. State the required quantity, date code, target package, and whether an industrial-temperature replacement is acceptable when requesting the quotation.

داده‌های مرجع مهندسی برای ATF22LV10C-10XU — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the ATF22LV10C-10XU when a 22V10-compatible design requires the shortest listed propagation delay, reliable nonvolatile flash configuration, and a 24-pin TSSOP footprint. Select ATF22LV10C-15XU when the control path has enough margin for a 15 ns grade; ATF22LV10C-20XU or ATF22LV10C-25XU may then provide additional sourcing flexibility. The slower grades retain the same architecture and package but increase the maximum delay by 5 ns, 10 ns, or 15 ns relative to the target. Do not substitute the 5 V ATF22V10C family merely because the suffix is similar; it belongs to a different supply-voltage family. For any non-listed replacement, verify the package, pin mapping, configuration method, voltage range, and timing before releasing the PCB.

مقایسه با جایگزین‌ها

پارامتر این محصول ATF22LV10C-15XU ATF22LV10C-20XU ATF22LV10C-25XU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 24-pin TSSOP 24-pin TSSOP 24-pin TSSOP 24-pin TSSOP
Architecture 22V10 22V10 22V10 22V10
Maximum Propagation Delay 10 ns 15 ns 20 ns 25 ns
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V
Macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells
User I/O Count 10 user I/Os 10 user I/Os 10 user I/Os 10 user I/Os
Configuration Memory Electrically Erasable Flash Memory Electrically Erasable Flash Memory Electrically Erasable Flash Memory Electrically Erasable Flash Memory
Programming Interface In-System Programming In-System Programming In-System Programming In-System Programming
Standby Current 10 μA typical 10 μA typical 10 μA typical 10 μA typical

تفاوت‌های کلیدی

  • Faster timing grade within the same 22V10 TSSOP family (در مقابلATF22LV10C-15XU)
  • Lower propagation delay for control and decode paths (در مقابلATF22LV10C-20XU)
  • Timing margin advantage over the slowest listed family grade (در مقابلATF22LV10C-25XU)

یادداشت‌های طراحی

Use the manufacturer datasheet's 24-pin TSSOP land pattern and pin-description table to assign the supply, ground, configuration, clock, input, and output nets. Keep the ISP or programming connections accessible if configuration updates are expected after PCB assembly. The ATF22LV10C architecture is based on the classic 22V10 arrangement, but a similarly named device does not guarantee identical programming or power pins. Cross-check the exact ordering code and package drawing against the PCB footprint before fabrication.

Place the supply bypass capacitor as close as practical to the device power and ground pins, following the value and layout specified in the Microchip ATF22LV10C datasheet. Keep the power-down path compatible with the 10 μA typical standby specification; long supply traces or leakage from connected I/O circuits can prevent the system from reaching the intended idle state. Confirm that every output has a defined level while the programmable logic is disabled, particularly when it controls reset or enable signals.

Analyze the slowest implemented logic path rather than assuming that the 10 ns grade alone guarantees system timing. Account for macrocell product-term delay, interconnect delay, output setup and hold requirements, and the acquisition behavior of the receiving circuit. The ATF22LV10C provides synchronous and asynchronous reset product terms, but the choice between them affects timing and must be reflected in the configuration file and system-reset architecture.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The manufacturer and distributor product information identifies the ATF22LV10C as a CMOS programmable logic device but does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements.

تاریخ تأیید داده‌ها: 2026-11-17 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ATF22LV10C-10XU datasheet ATF22LV10C-10XU pinout ATF22LV10C-10XU datasheet pdf ATF22LV10C-10XU equivalent ATF22LV10C-10XU replacement ATF22LV10C-10XU drop-in replacement ATF22LV10C-10XU cross reference ATF22LV10C-10XU vs ATF22LV10C-15XU ATF22LV10C-10XU footprint ATF22LV10C-10XU price ATF22LV10C-10XU stock Microchip ATF22LV10C-10XU ATF22LV10C-10XU 10ns 24-TSSOP ATF22LV10C-10XU industrial control logic ATF22LV10C-10XU programming interface

قطعات و اصطلاحات مرتبط

Microchip Technology ATF22LV10C-10XU ATF22LV10C-15XU ATF22LV10C-20XU ATF22LV10C-25XU ATF22LV10C ATF22V10C 22V10 architecture EEPLD SPLD electrically erasable programmable logic device simple programmable logic device low-voltage CMOS PLD programmable logic device logic IC integrated circuit semiconductor electrically erasable flash memory in-system programming variable product-term architecture 24-pin TSSOP TSSOP package family surface-mount device 10 macrocells 10 user I/Os 10 ns propagation delay 3.0 V to 5.5 V 10 μA standby current industrial control logic address decoding power-down management XCR22LV10 JEDEC-compatible 22V10 architecture
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ