Microchip Technology

ATSAMD21J15B-AU - 48MHz Cortex-M0+ 32KB Flash MCU | Microchip

MPN: ATSAMD21J15B-AU ✓ Aktif
3.3 V Vdss 64-pin TQFP, 10 mm x 10 mm Package 48 MHz Speed 32 KB Memory
MOQ: 1 |

ATSAMD21J15B-AU Genel Bakış

The Microchip Technology ATSAMD21J15B-AU is a 32-bit Arm Cortex-M0+ microcontroller operating up to 48 MHz, with 32 KB of in-system programmable Flash and 4 KB of SRAM, in a 64-pin TQFP package measuring 10 mm by 10 mm. It is designed for low-power embedded systems requiring flexible peripherals, event-system signal routing, capacitive-touch support, and a compact general-purpose control architecture.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The ATSAMD21J15B belongs to the SAM D21 family, which sits within the hierarchy of embedded processors, microcontrollers, and embedded semiconductors. Its Arm Cortex-M0+ core provides efficient 32-bit instruction processing while avoiding the resource demands of higher-performance application processors.

The ATSAMD21J15B-AU combines 32 KB of Flash with 4 KB of SRAM and supports operation from a 3.3 V supply. Its documented feature set includes a single-cycle hardware multiplier, power-on reset, an Event System for peripheral-to-peripheral signaling, and support for capacitive-touch buttons, sliders, and wheels. These resources make it suitable for compact human-interface, control, sensing, and connected embedded products.

Its peripheral architecture includes communication and timing functions suited to industrial control, consumer interfaces, and compact embedded nodes. The 64-pin package exposes more interface options than smaller microcontroller packages, while the 48 MHz operating frequency supports responsive event handling and control-loop execution. The manufacturer's product page identifies the device as a general-purpose, low-power SAM D21-series member with an Arm Cortex-M0+ processor.

Typical uses include capacitive-touch control panels, building-access terminals, compact sensor hubs, industrial interface modules, and embedded communications equipment. In these applications, the Event System can reduce peripheral coupling by allowing signals to be routed internally, while the SRAM and Flash allocation supports compact control firmware, calibration data, and application logic.

Board design should preserve the recommended power, decoupling, clock, and programming arrangements in the manufacturer datasheet. Because the package provides 64 pins, verify every signal against the exact pin-description table before routing the PCB. Use the 3.3 V operating supply consistently across the digital domain and confirm external peripheral voltage levels before connecting them directly to the microcontroller.

This page combines the manufacturer's device description with drop-in candidate analysis, a package-aware comparison, and practical design guidance for engineers evaluating the ATSAMD21J15B-AU. The alternatives are limited to devices for which the available cross-reference information supports the same 64-TQFP footprint; each candidate still requires board-level and firmware verification before substitution.

Drop-in alternatifler için ATSAMD21J15B-AU — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller ATSAMD21J15B-AU (aynı form faktörü ve ayağa oturma) — farklı olan Operating Temperature, Package.

Microchip Technology
Operating Temperature: -40 C to +85 C (AUT suffix)
Package: 64-pin TQFP (10 x 10 mm)
İle Karşılaştır ATSAMD21J15B-AU →

ATSAMD21J15A-AU

✅ Yerleştirme
📦 64-TQFP (10x10)
Older silicon revision with the same 48 MHz Cortex-M0+, 32 KB Flash, and 4 KB SRAM configuration; 0% change in the listed key parameters, but the manufacturer states it is not recommended for new designs

📋 Katalogda Olmayan Referans Alternatifi

ATSAMD21J15B-AUT

✅ Yerleştirme
Microchip Technology
📦 64-TQFP (10x10)
ARM Cortex-M0+ (32-bit) · 48 MHz · 32 KB (32K x 8) · 4 KB · 1.62 V to 3.63 V · 3.3 V · -40 C to +85 C (AUT suffix) · 64-pin TQFP (10 x 10 mm)

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

ATSAMD21J15B-CN

✅ Yerleştirme
📦 64-TQFP (10x10)
Same B-revision electrical device and 64-TQFP footprint with a different orderable package or delivery code; 0% change in the listed key parameters

📋 Katalogda Olmayan Referans Alternatifi

ATSAMD21J15B-AU Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 32-bit ARM Cortex-M0+ microcontroller
Processor Core Arm Cortex-M0+
Maximum CPU Frequency 48 MHz
Flash Memory 32 KB
Program Memory Organization 32K x 8 bits
SRAM 4 KB
Architecture 32-bit
İşletim Besleme Gerilimi 3.3 V
Paket 64-pin TQFP, 10 mm x 10 mm
Montaj Türü Surface mount
İşletim Sıcaklığı -40°C to +85°C
Green Package Yes
Hardware Multiplier Single-cycle
Programmable Memory 32 KB in-system self-programmable Flash
Reset Features Power-on reset (POR)
Peripheral Interconnect Event System
Capacitive Touch Support Buttons, slider, and wheel user interfaces
Functional Safety Functional Safety (FuSa) device

ATSAMD21J15B-AU yes Pin Yapısı Kılavuzu

ATSAMD21J15B-AU (yes paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

yes paket pin çizelgesi için ATSAMD21J15B-AU

Ayrıntılı pin çıkış verisi mevcut değil: ATSAMD21J15B-AU.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ATSAMD21J15B-AU için uygundur 6 uygulamas: Capacitive Touch Control Panels, Industrial Sensor Hubs, Building Access Terminals, Compact Communications Modules, Low-Power Embedded Control, Embedded IoT Control Nodes.

🧩

Capacitive Touch Control Panels

The ATSAMD21J15B-AU fits touch controls because its manufacturer documentation identifies support for capacitive-touch buttons, sliders, and wheel interfaces. The 48 MHz Arm Cortex-M0+ core can scan touch inputs, apply filtering, update display or relay commands, and communicate the result. Its 32 KB Flash and 4 KB SRAM provide room for compact acquisition and user-interface firmware. The Event System can also coordinate touch events with timers and other peripherals without relying entirely on central interrupt servicing. Board-level work should follow the manufacturer guidance for electrode routing, guard rings, filtering, and grounding.

🏭

Industrial Sensor Hubs

The ATSAMD21J15B-AU is suitable for a compact industrial sensor hub that gathers digital inputs and manages local sensing functions. Its 32-bit Cortex-M0+ processor operates up to 48 MHz, providing enough performance for sensor polling, threshold logic, filtering, diagnostics, and a communication stack within 32 KB Flash and 4 KB SRAM. The 64-pin TQFP package also offers more peripheral routing options than a compact 20-pin device. For reliable deployment, validate timing margins, input levels, isolation boundaries, and operating-temperature requirements for the complete controller assembly.

🏭

Building Access Terminals

The ATSAMD21J15B-AU can serve as the controller in a building-access terminal combining keypad or touch input, status indication, and a local serial interface. Its 48 MHz Cortex-M0+ core supports responsive event handling, while 32 KB Flash accommodates firmware for credential processing, keypad scanning, and diagnostics. The Event System supports structured peripheral interactions, helping coordinate timers, communication, and indicator outputs. Because terminals may operate near noisy motors and long cables, the design should include appropriate ESD protection, defined grounding, watchdog recovery, and careful separation of communication and power routing.

🌐

Compact Communications Modules

The ATSAMD21J15B-AU is appropriate for a compact communications module that performs protocol handling, local buffering, and user-interface updates. The Cortex-M0+ architecture executes 32-bit instructions at up to 48 MHz, while the Event System can route signals among communication and timing peripherals. Its 4 KB SRAM and 32 KB Flash suit concise network stacks, protocol parsers, and application state. The exact peripheral mix and pin multiplexing must be checked against the device documentation, and a production module should preserve brownout handling, clock stability, and firmware-update provisions across the full -40°C to +85°C range.

⚡

Low-Power Embedded Control

The ATSAMD21J15B-AU is a practical choice for low-power embedded control because the manufacturer classifies the SAM D21J as a low-power general-purpose microcontroller. Its Cortex-M0+ core provides efficient 32-bit processing without the overhead of a high-performance application processor, and the 64-pin package exposes a broad selection of I/O for actuators, sensors, and local interfaces. Software can use peripheral event routing and low-power modes to reduce activity between external events. Final energy performance depends on clock configuration, peripheral loading, sleep modes, and the leakage profile of the complete board.

🧩

Embedded IoT Control Nodes

The ATSAMD21J15B-AU can serve as the local control node in an IoT product that handles sensors, touch input, and a network-facing peripheral. The 48 MHz processor supports responsive foreground tasks, while 32 KB Flash and 4 KB SRAM fit compact protocol code and control state. Its Event System is useful for coordinating asynchronous peripheral activity, including timers and communication events. Designers should reserve pins for programming and recovery, implement a robust watchdog strategy, and confirm that the selected wireless or wired interface has compatible voltage levels and timing requirements.

Önerilen Ürünler Özeti

ATSAMD21J15 Base SAM D21J family device Kullanıldığı Yer: Capacitive Touch Control Panels, Building Access Terminals, Low-Power Embedded Control ATSAMD21J15B-AUT Microchip Technology Kullanıldığı Yer: Capacitive Touch Control Panels, Building Access Terminals, Low-Power Embedded Control, Embedded IoT Control Nodes ATSAMD21J15A-AU Legacy SAM D21J configuration candidate Kullanıldığı Yer: Industrial Sensor Hubs, Compact Communications Modules, Embedded IoT Control Nodes ATSAMD21J15B-CN Related B-revision orderable device Kullanıldığı Yer: Industrial Sensor Hubs, Compact Communications Modules
What are the key specifications of ATSAMD21J15B-AU that engineers should know?
The ATSAMD21J15B-AU is a 32-bit Arm Cortex-M0+ microcontroller rated up to 48 MHz, with 32 KB of Flash, 4 KB of SRAM, and a 3.3 V operating supply in a 64-pin TQFP package. According to the manufacturer product page, the SAM D21 device also includes an Event System, single-cycle hardware multiplier, power-on reset, and capacitive-touch support. It is positioned for compact, low-power embedded control and human-interface applications.
Where can I download the ATSAMD21J15B-AU datasheet PDF?
The ATSAMD21J15B-AU datasheet and supporting documents are available through the Microchip Technology product page for ATSAMD21J15. The manufacturer page identifies the device as a 48 MHz Cortex-M0+ MCU with 32 KB Flash, 4 KB RAM, and a 64-pin package. Use the datasheet's pin-description, electrical-characteristics, and package-drawing sections when creating the PCB footprint.
Where can I find the ATSAMD21J15B-AU pinout?
The ATSAMD21J15B-AU pinout is documented for the 64-pin TQFP package, and the device's package drawing uses a 10 mm by 10 mm body. The manufacturer datasheet is the authoritative source for pin numbers, alternate functions, and package dimensions. Assign PCB nets only after checking the pin-description table and the exposed-pad or thermal requirements specified for the exact package.
Is ATSAMD21J15B-AU suitable for low-power embedded control?
Yes, the ATSAMD21J15B-AU is suitable for low-power embedded control because the manufacturer identifies it as a low-power SAM D21 microcontroller with an efficient 32-bit Arm Cortex-M0+ core. Its 48 MHz maximum operating frequency supports responsive control and event processing, while 32 KB Flash and 4 KB SRAM suit compact firmware, sensor logic, and human-interface routines. Final sleep-mode performance depends on the selected peripherals and firmware configuration.
How much memory does ATSAMD21J15B-AU have?
The ATSAMD21J15B-AU provides 32 KB of in-system self-programmable Flash and 4 KB of SRAM. According to the manufacturer product description, the Flash is organized as 32K x 8 bits and supports 32-bit microcontroller operation. This memory combination is sufficient for compact control firmware, configuration data, touch processing, and lightweight communication routines without an external memory device.
What peripherals and features are available on ATSAMD21J15B-AU?
The ATSAMD21J15B-AU includes an Event System for internal peripheral signaling and supports capacitive-touch buttons, sliders, and wheel interfaces. The manufacturer also identifies a single-cycle hardware multiplier and power-on reset. These features help coordinate touch acquisition, timing, communications, and control tasks while reducing dependence on discrete logic in human-interface and industrial-control designs.
ATSAMD21J15B-AU vs ATSAMD21J15A-AU: which is better for a new design?
ATSAMD21J15B-AU is the preferred choice for a new design because the ATSAMD21J15A revision is identified as not recommended for new designs. Both devices use the same 64-TQFP format and are closely related SAM D21J implementations, but a new product should use the current B revision unless an existing platform specifically requires the earlier revision. Verify the exact pin assignments and firmware support before changing silicon revisions.
Can ATSAMD21J15A-AU replace ATSAMD21J15B-AU?
ATSAMD21J15A-AU is a close same-package candidate, but it should be treated as a legacy drop-in replacement rather than the preferred new-design choice. The cross-reference information identifies ATSAMD21J15A as not recommended for new designs, while both devices belong to the 64-pin SAM D21J family. Confirm electrical limits, peripheral configuration, pin multiplexing, and firmware revisions against the manufacturer documentation before production substitution.
When should I choose ATSAMD21J15B-AU over an alternative microcontroller?
Choose ATSAMD21J15B-AU when a design specifically needs the SAM D21J combination of a 48 MHz Arm Cortex-M0+ core, 32 KB Flash, 4 KB SRAM, capacitive-touch support, and a 64-pin TQFP footprint. It is particularly useful when existing board space requires many I/O pins and firmware can use the SAM peripheral ecosystem. Consider another candidate only after checking memory, peripheral, pinout, and software compatibility.
Is ATSAMD21J15B-AU suitable for capacitive-touch interfaces?
Yes, the ATSAMD21J15B-AU is suitable for capacitive-touch interfaces because the manufacturer documents support for capacitive-touch buttons, sliders, and wheel user interfaces. Its 48 MHz Cortex-M0+ core can process touch events and interface logic, while the Event System can coordinate signals among internal peripherals. Electrode layout, acquisition timing, filtering, and shielding should be developed with the manufacturer application guidance.
Where to buy ATSAMD21J15B-AU online?
The ATSAMD21J15B-AU can be requested through the Request a Quote form on this page for current sourcing, stock confirmation, and lead-time handling. The request should identify the exact 64-TQFP MPN, ATSAMD21J15B-AU, rather than the base ATSAMD21J15 designation or the related AUT ordering code. This prevents confusion between package, temperature, and delivery-option identifiers.
What is the price of ATSAMD21J15B-AU?
Current pricing for ATSAMD21J15B-AU is obtained through the Request a Quote form on this page. The form should be used for the exact MPN ATSAMD21J15B-AU so the order can be matched to the 64-TQFP device with 32 KB Flash, 4 KB SRAM, and a 48 MHz Cortex-M0+ core. Pricing should be confirmed against the requested quantity, delivery condition, and authorized supply channel.
What is the lead time for ATSAMD21J15B-AU?
The current lead time for ATSAMD21J15B-AU should be confirmed through the Request a Quote form on this page. Include the required quantity and whether factory-sealed production quantities are needed. The exact MPN identifies a 64-TQFP ATSAMD21J15B device rated for a 3.3 V supply and an operating temperature range of -40°C to +85°C.
Is ATSAMD21J15B-AU in stock?
Use the Request a Quote form on this page to request current stock confirmation for ATSAMD21J15B-AU. Provide the required quantity and target delivery date in the request. The part identifier corresponds to the 64-pin TQFP SAM D21J device with 32 KB Flash, 4 KB SRAM, and a maximum CPU frequency of 48 MHz.
What can replace ATSAMD21J15B-AU on the same PCB?
ATSAMD21J15A-AU is the closest legacy same-package candidate identified for ATSAMD21J15B-AU, but the B revision is recommended for new designs. Related ATSAMD21J15B ordering codes can differ in delivery format rather than electrical function. Before replacing the device, compare the manufacturer pin table, operating limits, peripheral configuration, and firmware support; a package match alone does not prove complete system compatibility.

Mühendislik referans verileri: ATSAMD21J15B-AU — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose ATSAMD21J15B-AU for a new design that requires a 48 MHz Arm Cortex-M0+ core, 32 KB Flash, 4 KB SRAM, capacitive-touch support, and a 64-pin TQFP footprint. It is particularly suitable when an existing board or ecosystem is standardized around SAM D21J devices. ATSAMD21J15A-AU is the closest legacy alternative, with matching headline resources and package, but it should be reserved for maintenance work because the manufacturer does not recommend it for new designs. ATSAMD21J15B-AUT and ATSAMD21J15B-CN are related orderable B-revision options whose exact ordering-code differences should be matched to assembly and delivery requirements. Before substitution, verify the complete pin table, alternate functions, electrical limits, package drawing, device revision notes, and firmware support.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün ATSAMD21J15A-AU ATSAMD21J15B-AUT ATSAMD21J15B-CN
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 64-TQFP (10x10) 64-TQFP (10x10) 64-TQFP (10x10) 64-TQFP (10x10)
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 32 KB 32 KB 32 KB 32 KB
SRAM 4 KB 4 KB 4 KB 4 KB
Operating Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V
Operating Temperature -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C
Programmable Memory Type 32 KB in-system self-programmable Flash 32 KB in-system self-programmable Flash 32 KB in-system self-programmable Flash 32 KB in-system self-programmable Flash
Peripheral Interconnect Event System Event System Event System Event System
New-Design Status B revision preferred for new designs Not recommended for new designs Related B-revision ordering code Related B-revision ordering code

Ana Farklılayıcılar

  • Preferred B revision for new SAM D21J designs (karşılaştırma:ATSAMD21J15A-AU)
  • Broad interface access in a compact 64-pin package (karşılaştırma:ATSAMD21J15A-AU)
  • Event-driven peripheral architecture (karşılaştırma:ATSAMD21J15B-CN)

Tasarım Notları

Build the PCB footprint from the manufacturer package drawing for the 64-pin TQFP rather than relying on a generic 64-pin library symbol. Confirm the 10 mm by 10 mm body, lead span, pitch, and recommended land pattern. Preserve access to programming and debug signals, and place decoupling capacitors adjacent to the appropriate supply pins to minimize supply-impedance paths and keep switching transients away from sensitive analog or communication nodes.

Design the 3.3 V supply path for both startup and transient requirements. Include local high-frequency decoupling at the MCU supply pins, maintain a defined return path, and account for voltage droop during peripheral activity. If external devices use another voltage domain, use appropriately rated level shifting instead of assuming the ATSAMD21J15B-AU pins are 5 V tolerant. Validate brownout, reset, and power-sequencing behavior across the full -40°C to +85°C range.

Do not substitute ATSAMD21J15A-AU into a new design without checking the change notice and firmware support. Although it uses the same 64-TQFP family format and closely matches the core, memory, and speed configuration, the manufacturer identifies the A revision as not recommended for new designs. Also check alternate-function multiplexing, peripheral instance assignments, and package-specific pin names before using an ordering-code variant as a production replacement.

Separate sensitive signal paths from switching nodes and high-current return paths. The Event System can reduce software coupling between peripherals, but it does not remove PCB-level interference concerns. Use a continuous ground reference where practical, keep clock and communication traces short, and place external protection close to connectors or exposed interfaces. For capacitive-touch designs, follow the manufacturer's electrode and guard-layout guidance because copper and enclosure geometry can alter sensitivity.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The manufacturer describes ATSAMD21J15A-AU as not recommended for new designs and recommends ATSAMD21J15B. The ATSAMD21J15B-AU listing identifies a green package, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 declaration was established.

Veri doğrulanma tarihi: 2026-11-20 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

ATSAMD21J15B-AU datasheet ATSAMD21J15B-AU pinout ATSAMD21J15B-AU specifications ATSAMD21J15B-AU 64 TQFP ATSAMD21J15B-AU replacement ATSAMD21J15B-AU equivalent ATSAMD21J15B-AU price ATSAMD21J15B-AU stock Microchip ATSAMD21J15B-AU ATSAMD21J15B-AU vs ATSAMD21J15A-AU ATSAMD21J15B-AU application circuit ATSAMD21J15B-AU schematic

İlgili Bileşenler ve Terimler

Microchip Technology ATSAMD21J15B-AU ATSAMD21J15 ATSAMD21J15A-AU ATSAMD21J15B-AUT ATSAMD21J15B-CN SAM D21 SAM D21J Arm Cortex-M0+ 32-bit microcontroller embedded microcontroller semiconductor 32 KB Flash 4 KB SRAM 48 MHz Event System capacitive touch power-on reset single-cycle hardware multiplier 64-pin TQFP TQFP package family surface mount SMD 3.3 V RoHS REACH AEC-Q100
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle