Microchip Technology

ATTINY261A-MU - 20MHz 8-Bit AVR MCU | Microchip Technology

MPN: ATTINY261A-MU ✓ Aktif
1.8 V to 5.5 V Vdss 32-VQFN (5x5 mm) Package 20 MHz Speed 2 KB Flash (1K x 16) Memory
MOQ: 1 |

ATTINY261A-MU Genel Bakış

Microchip Technology ATTINY261A-MU is an 8-bit AVR RISC-based microcontroller operating up to 20 MHz, with 2 KB of Flash memory, 128 B of EEPROM, 128 B of SRAM, and 16 general-purpose I/O lines. The device is housed in a 32-pin VQFN (5x5 mm) package and is designed for compact embedded-control, sensor, communication, and power-control systems.

An 8-bit AVR microcontroller is a compact embedded-processing device that combines a RISC-based CPU core, program Flash, data EEPROM, SRAM, general-purpose I/O, and dedicated peripherals in one integrated circuit. The ATtiny261A belongs to the TinyAVR hierarchy within the AVR microcontroller family, providing inexpensive, low-power control for applications that do not require a high-performance 32-bit processor. Its picoPower implementation is intended to balance processing capability with energy efficiency.

Key device resources include 32 general-purpose working registers, 16 general-purpose I/O lines, and an 8-bit timer/counter with compare modes. The 2 KB Flash memory provides 1K x 16 words for program storage, while 128 B of EEPROM supports nonvolatile parameter retention. The 128 B of SRAM handles working data and stack operations, and the 16 I/O pins allow direct connection to sensors, switches, indicators, and actuator-control circuitry.

The ATTINY261A-MU uses Microchip’s enhanced AVR architecture and is supported by the ATtiny261A family documentation. Its operating voltage spans 1.8 V to 5.5 V, making it suitable for both low-voltage portable systems and conventional 5 V embedded equipment. The 20 MHz maximum clock rate provides ample timing margin for pulse measurement, control-loop updates, serial-data handling, and user-interface polling.

Typical uses include building automation, industrial sensing, battery-powered instrumentation, compact motor controllers, LED status indicators, and small control panels. In each case, the device can consolidate several discrete functions: reading a sensor, debouncing inputs, sequencing outputs, storing configuration in EEPROM, and controlling a power stage through timer-based or software PWM functions.

PCB design should account for the 32-pin VQFN land pattern, exposed-pad requirements, and the short connection requirements of high-speed clock and power nets. Follow the family datasheet’s recommended decoupling and exposed-pad land pattern, and confirm the exact pin assignments before assigning PCB signals. The 5x5 mm footprint supports compact designs but requires careful assembly planning and thermal via placement.

This page organizes the ATTINY261A-MU’s memory, timing, package, and purchasing information with application guidance, verified drop-in options, and design notes. It helps engineers evaluate whether the controller’s 20 MHz performance and 2 KB program-memory limit fit a control task before committing to a PCB layout.

Drop-in alternatifler için ATTINY261A-MU — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller ATTINY261A-MU (aynı form faktörü ve ayağa oturma) — farklı olan Package, Product Type, Maximum Clock Frequency, Architecture, EEPROM.

Microchip Technology
Package: 32-VQFN (5 mm x 5 mm)
Product Type: 8-bit AVR RISC Microcontroller
Maximum Clock Frequency: 16 MHz
İle Karşılaştır ATTINY261A-MU →
Microchip Technology
Package: 32-QFN, 5 x 5 mm
Product Type: 8-bit RISC microcontroller
Architecture: AVR with picoPower technology
İle Karşılaştır ATTINY261A-MU →

ATTINY261-20MU

✅ Yerleştirme
📦 32-VQFN (5x5 mm)
Same 20 MHz speed rating and 32-VQFN package; earlier ATtiny261 generation differs in some electrical characteristics

📋 Katalogda Olmayan Referans Alternatifi

ATTINY261A-MUR

✅ Yerleştirme
📦 32-VQFN (5x5 mm)
Same ATTINY261A electrical configuration and 20 MHz rating; differs only in tape-and-reel ordering presentation

📋 Katalogda Olmayan Referans Alternatifi

ATTINY261A-MU Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 8-bit RISC-based AVR microcontroller
Azami Saat Hızı 20 MHz
Program Memory 2 KB Flash (1K x 16)
EEPROM 128 B
SRAM 128 B
General-Purpose I/O Lines 16
General-Purpose Working Registers 32
Timer/Counter 8-bit with compare modes
Architecture AVR enhanced RISC
Technology picoPower
Operating Voltage 1.8 V to 5.5 V
Paket 32-VQFN (5x5 mm)
Montaj Türü Surface Mount
Industrial Temperature Grade -40°C to +85°C
Programming Interface In-system programmable

ATTINY261A-MU 32-vqfn (5x5 mm) Pin Yapısı Kılavuzu

ATTINY261A-MU (32-vqfn (5x5 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

32-vqfn (5x5 mm) paket pin çizelgesi için ATTINY261A-MU

Ayrıntılı pin çıkış verisi mevcut değil: ATTINY261A-MU.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ATTINY261A-MU için uygundur 6 uygulamas: Industrial Sensor and Condition Monitoring, Battery-Powered Portable Instrument, LED Lighting and Status Controller, Small Motor and Valve Control, Smart Home and IoT Endpoint, Timing and Event Control Module.

🏭

Industrial Sensor and Condition Monitoring

The ATTINY261A-MU fits compact industrial monitoring modules that must read switches or analog-derived signals, apply filtering, record operating states, and report status locally. Its 16 general-purpose I/O lines leave connections available for sensors and control outputs, while the 8-bit timer/counter with compare modes supports periodic sampling or event timing. The 20 MHz AVR core processes the control logic at ample speed for small data acquisition loops, and 128 B of EEPROM can retain calibration or configuration values. Because the program-memory limit is only 2 KB, the firmware should focus on acquisition, filtering, debouncing, and event handling rather than heavy protocol buffering. Use the family datasheet to select the device’s voltage range and verify industrial temperature operation against the assembled enclosure conditions.

📱

Battery-Powered Portable Instrument

The ATTINY261A-MU is appropriate for a small battery-operated instrument because its operating range extends down to 1.8 V and its picoPower-based 8-bit architecture supports clock and peripheral control for reduced energy use. Sixteen I/O lines can support buttons, status indicators, and low-bandwidth sensor interfaces, while the timer/counter can establish accurate timing intervals. The device can retain user settings in 128 B of EEPROM without adding an external nonvolatile memory. Design the firmware around the 2 KB Flash limit and use low-frequency operation during idle periods. Actual battery performance should be evaluated with the complete sensor and interface circuitry because regulator quiescent current, pull networks, and indicator loads can exceed the controller’s own consumption.

💡

LED Lighting and Status Controller

The ATTINY261A-MU can control compact LED status panels, signage, or indicator boards where a high-performance processor is unnecessary. Its 16 I/O lines permit direct management of multiple digital channels, while software PWM implemented with the 8-bit timer/counter can provide dimming and visual effects without a dedicated LED-driver IC. The 20 MHz clock rate provides frequent task scheduling and smooth updates, and the 128 B SRAM is adequate for modest display-state variables. EEPROM can store brightness presets or operating modes across power cycles. Account for the limited 2 KB program space when adding animations, and use transistor or constant-current drive stages rather than driving substantial LED loads directly from the microcontroller pins.

🔧

Small Motor and Valve Control

The ATTINY261A-MU is useful in compact motor, valve, or relay-control subsystems where deterministic switching, local interlocks, and status reporting are required. Timer compare outputs can generate repeatable pulse sequences, while the AVR core can combine limit-switch inputs with timeout logic before energizing an external driver. Sixteen I/O lines allow control signals, feedback inputs, and fault indicators to share one package. The 128 B EEPROM may store calibration values or operating counters, while the 2 KB Flash limit favors compact state-machine firmware. Keep the controller away from high-current switching paths, use protection against inductive transients, and validate timing across the full 1.8 V to 5.5 V supply range.

🧩

Smart Home and IoT Endpoint

The ATTINY261A-MU can serve as a compact IoT endpoint for a local switch, simple occupancy sensor, or low-rate remote-control node. Its 16 I/O lines support digital inputs, outputs, and an interface to a communications module, while the 20 MHz processor handles framing, acknowledgment, and device-state updates. The 2 KB Flash footprint is appropriate for a focused endpoint rather than a gateway, and 128 B of EEPROM can retain network-independent configuration such as calibration values or operating modes. Power the controller within its 1.8 V to 5.5 V range and account for wireless-module current bursts in the supply design. A wake strategy based on the timer/counter can reduce average consumption when the application tolerates delayed response.

⏱️

Timing and Event Control Module

The ATTINY261A-MU is well suited to a compact event-control module because its 8-bit timer/counter with compare modes can maintain precise intervals and compare events independently of the main application loop. The controller can timestamp inputs, debounce transitions, operate a countdown, or generate a periodic control pulse across 16 I/O lines. At 20 MHz, it offers sufficient timing resolution for many instrumentation and control tasks while retaining a simple 8-bit software model. Its 128 B SRAM is adequate for counters and state variables, while 128 B of EEPROM can preserve a programmed interval or operating profile. Validate timer accuracy and pin multiplexing against the package documentation, and avoid using the 2 KB program memory for logging functions that could exceed the available storage.

Önerilen Ürünler Özeti

ATTINY261A-MUR Same controller in tape-and-reel production packaging Kullanıldığı Yer: Industrial Sensor and Condition Monitoring, Battery-Powered Portable Instrument, LED Lighting and Status Controller, Small Motor and Valve Control, Smart Home and IoT Endpoint, Timing and Event Control Module ATTINY261-20MU Pin-compatible 20 MHz controller alternative Kullanıldığı Yer: Industrial Sensor and Condition Monitoring, Battery-Powered Portable Instrument, LED Lighting and Status Controller, Small Motor and Valve Control, Smart Home and IoT Endpoint, Timing and Event Control Module
What are the key specifications of ATTINY261A-MU that engineers should know?
The ATTINY261A-MU is a 20 MHz, 8-bit AVR RISC microcontroller with 2 KB of Flash, 128 B of EEPROM, 128 B of SRAM, 16 general-purpose I/O lines, and 32 working registers in a 32-VQFN package. According to the Microchip ATtiny261A product page, the device also includes an 8-bit timer/counter with compare modes. Its 1.8 V to 5.5 V operating range supports low-voltage and 5 V embedded designs. These figures establish the controller’s main capacity limits: firmware must fit within 2 KB, volatile working memory is limited to 128 B, and the 20 MHz clock rate is the principal performance figure.
Where can I download the ATTINY261A-MU datasheet PDF?
The ATTINY261A-MU datasheet can be obtained through Microchip’s ATtiny261A product page or the manufacturer-hosted family PDF for ATtiny261, ATtiny461, and ATtiny861 devices. The manufacturer datasheet is the controlling document for pin assignments, electrical limits, programming, package drawings, and application circuits. It identifies the device as an 8-bit AVR RISC-based microcontroller with 2 KB Flash, 128 B EEPROM, 128 B SRAM, and 16 I/O lines. Use the family document together with the exact ordering information for ATTINY261A-MU, including its 32-VQFN package and industrial temperature designation.
Where can I find the ATTINY261A pinout?
The ATTINY261A pinout is located in the pin-description and package drawings in the Microchip ATtiny261A family datasheet. The ATTINY261A-MU uses a 32-VQFN (5x5 mm) surface-mount package, so its land pattern and exposed-pad requirements must also be checked in the same document. Do not infer assignments from a generic 32-pin drawing because alternate package variants can differ. Use the pin-description table to assign port, power, reset, programming, and timer signals, and follow the package dimensions and land-pattern guidance when creating the PCB footprint.
What is the ATTINY261A-MU used for?
The ATTINY261A-MU is used for compact embedded-control tasks such as sensor conditioning, digital switching, LED indication, configuration storage, and small actuator control. According to Microchip, the device combines a 20 MHz 8-bit AVR core with 16 I/O lines, an 8-bit timer/counter with compare modes, 2 KB Flash, and 128 B of SRAM. The timer can support timing-sensitive output functions, while EEPROM can retain settings without continuous power. Its strongest fit is a modest control design where low cost, compact size, and deterministic peripheral timing matter more than large firmware or high-bandwidth processing.
What is the memory capacity of ATTINY261A-MU?
The ATTINY261A-MU provides 2 KB of in-system programmable Flash, 128 B of EEPROM, and 128 B of SRAM. Microchip describes the Flash organization as 1K x 16 words, which is the standard program-memory representation for this 8-bit AVR device. EEPROM is intended for values that must survive power removal, while SRAM supports active program execution and working data. Because the program memory is only 2 KB, firmware should be checked for bootloader space, libraries, and application growth before a PCB is released for production.
What is the operating voltage of ATTINY261A-MU?
The ATTINY261A-MU operates from 1.8 V to 5.5 V according to the comparison information associated with the exact device. This range allows the same controller family to serve low-voltage portable products and conventional 5 V embedded equipment. Design the power system so the supply remains within the limits under transient conditions, and connect decoupling capacitors according to the manufacturer’s recommended application circuit. External interface levels must also be compatible with the selected operating voltage or protected through suitable level translation.
Where can I buy ATTINY261A-MU online?
Use the Request a Quote form on this page to request ATTINY261A-MU availability, current commercial terms, and a production order. The request identifies the exact 32-VQFN industrial-temperature ordering code and helps the supply team confirm package, quantity, and delivery requirements. Microchip’s ATtiny261A product page remains the authoritative source for product status and family documentation. Request the current lead time and minimum order quantity through the form because those commercial conditions can change with inventory and production schedules.
What is the price of ATTINY261A-MU?
The current commercial price for ATTINY261A-MU is handled through the Request a Quote form on this page rather than a static price statement. Submit the required quantity, target package, and delivery schedule to receive current pricing and availability. The component is specifically ordered as ATTINY261A-MU in the 32-VQFN (5x5 mm) package with industrial temperature grading, so the inquiry should preserve the complete MPN to avoid mismatched package or temperature variants.
What is the lead time for ATTINY261A-MU?
The current lead time for ATTINY261A-MU should be confirmed through the Request a Quote form on this page. Include the requested production quantity, delivery target, and packaging requirement so the order can be matched to available factory inventory or an appropriate production plan. Microchip’s ATtiny261A product page is the authoritative source for device information and lifecycle status. Distributor inventory can fluctuate, so a firm lead time should be obtained for the exact MPN and order quantity rather than inferred from general market conditions.
Is ATTINY261A-MU in stock?
Stock for ATTINY261A-MU is best confirmed through the Request a Quote form on this page. Provide the required order quantity and target schedule, and the supply team can respond with current availability for the exact 32-VQFN device. The ATTINY261A-MU is listed by Microchip as an active family member, but active lifecycle status does not guarantee inventory for every order quantity or package configuration. A direct quote request also helps distinguish immediate distributor stock from parts that require a manufacturer production allocation.
What can replace ATTINY261A-MU?
ATTINY261-20MU is a documented same-package alternative with a comparable 20 MHz operating rating, while ATTINY261A-MUR is the tape-and-reel ordering form of the same ATTINY261A device. Migration from the older ATtiny261 generation to ATtiny261A is described by Microchip as functionally identical and drop-in, although some electrical characteristics differ because the manufacturing process changed. Before substitution, verify the exact package, clock rating, operating range, pin functions, and electrical limits against the current family datasheet.
Is ATTINY261A-MU the same as ATTINY261A-MUR?
ATTINY261A-MU and ATTINY261A-MUR represent the same ATTINY261A device with different orderable packaging presentation, with MUR identified as the tape-and-reel form in the distributor results. The underlying controller characteristics remain 2 KB Flash, 128 B EEPROM, 128 B SRAM, 16 I/O lines, and a maximum 20 MHz clock. For an existing 32-VQFN PCB, confirm the land pattern and reel-handling requirements at procurement rather than treating the suffix difference as an electrical change.
What is the best Microchip equivalent for ATTINY261A-MU?
The best documented Microchip equivalent for a direct hardware substitution is ATTINY261-20MU because it uses the same 32-VQFN (5x5 mm) package and carries the same 20 MHz speed designation. ATTINY261A-MUR is the alternate reel-packaging order code for the enhanced ATTINY261A device. The older ATtiny261 family differs internally from ATtiny261A because the manufacturing process changed, so engineers should review clock, analog, power, and timing characteristics in the family documentation even though the migration can be pin-compatible.
ATTINY261A-MU vs ATTINY261-20MU: which is better for a new design?
ATTINY261A-MU is generally the better starting point for a new design because it is part of the enhanced ATtiny261A family and is identified as the current active product. ATTINY261-20MU is a legitimate 20 MHz, 32-VQFN alternative for a drop-in replacement where the original design has been validated. Microchip describes ATtiny261A as functionally identical to the earlier ATtiny261 family, but its manufacturing process causes some electrical characteristics to differ. Compare reset behavior, clock timing, power consumption, ADC-related limits, and application-note migration guidance before finalizing the choice.
What is the difference between ATTINY261A-MU and ATTINY261-20MU?
ATTINY261A-MU and ATTINY261-20MU share a 20 MHz speed designation and a 32-VQFN (5x5 mm) package, making the older part a practical pin-compatible alternative. Their principal distinction is device generation: Microchip’s AVR531 migration note states that ATtiny261A is functionally a drop-in replacement for ATtiny261, but some electrical characteristics differ because the process changed. For new designs, favor ATTINY261A-MU; for repairing an existing board, ATTINY261-20MU may be suitable after checking the original schematic, operating voltage, timing, and datasheet limits.
When should I choose ATTINY261A-MU over ATTINY261-20MU?
Choose ATTINY261A-MU for a new design when you want the enhanced ATtiny261A family, current product status, and the 1.8 V to 5.5 V operating range without relying on legacy-device migration guidance. Choose ATTINY261-20MU when maintaining a proven PCB that already uses that footprint and the earlier device’s electrical characteristics have been validated. Both support a 20 MHz operating point, so the decisive factors are product generation, availability, qualification history, and whether the original design depends on legacy timing, reset, power, or peripheral behavior.
Is ATTINY261A-MU suitable for battery-powered sensor nodes?
The ATTINY261A-MU is suitable for compact battery-powered sensor nodes when its 2 KB Flash, 128 B SRAM, 16 I/O lines, and 1.8 V to 5.5 V operating range satisfy the design constraints. The picoPower architecture and ability to run at lower clock rates can help reduce energy consumption, but actual battery life depends on duty cycle, sensor load, brownout settings, and leakage. Use the manufacturer sleep-mode and clock-selection guidance, then measure the complete node because peripheral activity and external components often dominate total energy use.
What tools and programming interface are used with ATTINY261A-MU?
The ATTINY261A-MU is programmed through the AVR in-system programming interface described in the Microchip family documentation. Its 2 KB Flash can be programmed and reprogrammed during development, while the 128 B EEPROM is suitable for retaining configuration data. The controller supports 16 general-purpose I/O lines and an 8-bit timer/counter with compare modes. Production programming should follow Microchip’s recommended electrical levels, clock, reset, and decoupling arrangements, with a test point strategy that remains accessible after the component-side assembly is complete.

Mühendislik referans verileri: ATTINY261A-MU — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose ATTINY261A-MU for a new compact control design that benefits from the enhanced ATtiny261A family, active product positioning, a 20 MHz clock, and a 1.8 V to 5.5 V operating range. Its 2 KB Flash and 128 B SRAM are suitable for focused sensing, timing, switching, and configuration-retention tasks rather than gateway or data-logging applications. ATTINY261-20MU is the relevant choice when maintaining an already validated board in the same 32-VQFN footprint and 20 MHz class, provided the legacy-device electrical differences are reviewed. ATTINY261A-MUR is the matched reel-packaged form of ATTINY261A for production purchasing. Neither alternative should be selected merely from the package name: confirm speed grade, electrical limits, timer behavior, reset conditions, and temperature range in the manufacturer documentation.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün ATTINY261-20MU ATTINY261A-MUR
Package 32-VQFN (5x5 mm) 32-VQFN (5x5 mm) 32-VQFN (5x5 mm)
Brand Microchip Technology Microchip Technology Microchip Technology
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz
Program Memory 2 KB Flash (1K x 16) 2 KB Flash 2 KB Flash (1K x 16)
EEPROM 128 B 128 B 128 B
SRAM 128 B 128 B 128 B
General-Purpose I/O 16 lines 16 lines 16 lines
Operating Voltage 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V
Device Generation ATtiny261A enhanced family ATtiny261 earlier generation ATtiny261A enhanced family

Ana Farklılayıcılar

  • Enhanced ATtiny261A generation with a 20 MHz operating point (karşılaştırma:ATTINY261-20MU)
  • Exact 32-VQFN ordering configuration for the target design (karşılaştırma:ATTINY261-20MU)
  • Matched electrical configuration without a device-generation change (karşılaştırma:ATTINY261-20MU)

Tasarım Notları

Create the 32-VQFN footprint from the exact manufacturer package drawing rather than a generic 32-pin QFN footprint. Verify pad dimensions, exposed-pad geometry, solder-mask clearance, and the number and placement of thermal vias. Place input, ground, and decoupling connections close to their associated pins, and route the clock and programming signals away from noisy switching nodes. The 5x5 mm package saves board area but leaves little tolerance for footprint or paste-template errors, so inspect the first assembled article under magnification.

Design the supply for the controller’s complete 1.8 V to 5.5 V operating range and for any attached sensor or communications load. Add local bulk and high-frequency decoupling following the manufacturer’s recommended application circuit, and keep return-current paths short. If the board includes a motor, relay, or wireless transmitter, isolate those switching currents from the AVR supply and provide appropriate protection for transients. Verify brownout behavior at the lowest system voltage because timer accuracy and reliable program execution depend on adequate supply voltage.

Do not underestimate the 2 KB Flash and 128 B SRAM constraints. Avoid adding large libraries, verbose diagnostics, or unbounded buffers that exceed the available program and data space. The ATtiny261A family also includes devices with different Flash densities, so confirm that code intended for ATtiny461A or ATtiny861A does not silently target the wrong controller. For migration from ATtiny261, review Microchip’s AVR531 note because the newer process changes some electrical characteristics even though the migration is functionally drop-in.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The linked ATtiny261/461/861 family document describes AEC-Q100 grade 1 qualification for the original family, but qualification for the exact ATTINY261A-MU ordering code is not established. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require an exact product declaration.

İlgili Aramalar

attiny261a datasheet attiny261a pinout attiny261a su datasheet ATTINY261A-MU datasheet pdf ATTINY261A-MU pinout ATTINY261A-MU specifications ATTINY261A-MU application circuit ATTINY261A-MU equivalent ATTINY261A-MU replacement ATTINY261A-MU vs ATTINY261-20MU Microchip ATTINY261A-MU ATTINY261A-MU price ATTINY261A-MU stock ATTINY261A 32-VQFN footprint

İlgili Bileşenler ve Terimler

Microchip Technology ATTINY261A-MU ATTINY261A ATTINY261-20MU ATTINY261A-MUR AVR TinyAVR 8-bit RISC microcontroller embedded microcontroller picoPower 2 KB Flash 128 B EEPROM 128 B SRAM 16 general-purpose I/O lines 8-bit timer/counter compare mode 1.8 V to 5.5 V operating voltage 32-VQFN QFN family surface-mount package in-system programming industrial control sensor monitoring battery-powered instrumentation LED status control
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle