ATTINY261A-MU - 20MHz 8-Bit AVR MCU | Microchip Technology
MPN: ATTINY261A-MU ✓ 啟用中ATTINY261A-MU 概覽
An 8-bit AVR microcontroller is a compact embedded-processing device that combines a RISC-based CPU core, program Flash, data EEPROM, SRAM, general-purpose I/O, and dedicated peripherals in one integrated circuit. The ATtiny261A belongs to the TinyAVR hierarchy within the AVR microcontroller family, providing inexpensive, low-power control for applications that do not require a high-performance 32-bit processor. Its picoPower implementation is intended to balance processing capability with energy efficiency.
Key device resources include 32 general-purpose working registers, 16 general-purpose I/O lines, and an 8-bit timer/counter with compare modes. The 2 KB Flash memory provides 1K x 16 words for program storage, while 128 B of EEPROM supports nonvolatile parameter retention. The 128 B of SRAM handles working data and stack operations, and the 16 I/O pins allow direct connection to sensors, switches, indicators, and actuator-control circuitry.
The ATTINY261A-MU uses Microchip’s enhanced AVR architecture and is supported by the ATtiny261A family documentation. Its operating voltage spans 1.8 V to 5.5 V, making it suitable for both low-voltage portable systems and conventional 5 V embedded equipment. The 20 MHz maximum clock rate provides ample timing margin for pulse measurement, control-loop updates, serial-data handling, and user-interface polling.
Typical uses include building automation, industrial sensing, battery-powered instrumentation, compact motor controllers, LED status indicators, and small control panels. In each case, the device can consolidate several discrete functions: reading a sensor, debouncing inputs, sequencing outputs, storing configuration in EEPROM, and controlling a power stage through timer-based or software PWM functions.
PCB design should account for the 32-pin VQFN land pattern, exposed-pad requirements, and the short connection requirements of high-speed clock and power nets. Follow the family datasheet’s recommended decoupling and exposed-pad land pattern, and confirm the exact pin assignments before assigning PCB signals. The 5x5 mm footprint supports compact designs but requires careful assembly planning and thermal via placement.
This page organizes the ATTINY261A-MU’s memory, timing, package, and purchasing information with application guidance, verified drop-in options, and design notes. It helps engineers evaluate whether the controller’s 20 MHz performance and 2 KB program-memory limit fit a control task before committing to a PCB layout.
直接替換替代品,適用於 ATTINY261A-MU — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATTINY261A-MU (相同外形與佔位) — 差異在於 Package, Product Type, Maximum Clock Frequency, Architecture, EEPROM.
ATTINY261-20MU
✅ 直接替換📋 參考替代品(不在目錄中)
ATTINY261A-MUR
✅ 直接替換📋 參考替代品(不在目錄中)
ATTINY261A-MU 最大額定值與電氣特性
| Product Type | 8-bit RISC-based AVR microcontroller |
| 最大時脈頻率 | 20 MHz |
| Program Memory | 2 KB Flash (1K x 16) |
| EEPROM | 128 B |
| SRAM | 128 B |
| General-Purpose I/O Lines | 16 |
| General-Purpose Working Registers | 32 |
| Timer/Counter | 8-bit with compare modes |
| Architecture | AVR enhanced RISC |
| Technology | picoPower |
| Operating Voltage | 1.8 V to 5.5 V |
| 封裝 | 32-VQFN (5x5 mm) |
| 安裝類型 | Surface Mount |
| Industrial Temperature Grade | -40°C to +85°C |
| Programming Interface | In-system programmable |
ATTINY261A-MU 32-vqfn (5x5 mm) 腳位配置指南
ATTINY261A-MU(32-vqfn (5x5 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATTINY261A-MU.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATTINY261A-MU 適用於 6 應用s: Industrial Sensor and Condition Monitoring, Battery-Powered Portable Instrument, LED Lighting and Status Controller, Small Motor and Valve Control, Smart Home and IoT Endpoint, Timing and Event Control Module.
Industrial Sensor and Condition Monitoring
The ATTINY261A-MU fits compact industrial monitoring modules that must read switches or analog-derived signals, apply filtering, record operating states, and report status locally. Its 16 general-purpose I/O lines leave connections available for sensors and control outputs, while the 8-bit timer/counter with compare modes supports periodic sampling or event timing. The 20 MHz AVR core processes the control logic at ample speed for small data acquisition loops, and 128 B of EEPROM can retain calibration or configuration values. Because the program-memory limit is only 2 KB, the firmware should focus on acquisition, filtering, debouncing, and event handling rather than heavy protocol buffering. Use the family datasheet to select the device’s voltage range and verify industrial temperature operation against the assembled enclosure conditions.
推薦
Battery-Powered Portable Instrument
The ATTINY261A-MU is appropriate for a small battery-operated instrument because its operating range extends down to 1.8 V and its picoPower-based 8-bit architecture supports clock and peripheral control for reduced energy use. Sixteen I/O lines can support buttons, status indicators, and low-bandwidth sensor interfaces, while the timer/counter can establish accurate timing intervals. The device can retain user settings in 128 B of EEPROM without adding an external nonvolatile memory. Design the firmware around the 2 KB Flash limit and use low-frequency operation during idle periods. Actual battery performance should be evaluated with the complete sensor and interface circuitry because regulator quiescent current, pull networks, and indicator loads can exceed the controller’s own consumption.
推薦
LED Lighting and Status Controller
The ATTINY261A-MU can control compact LED status panels, signage, or indicator boards where a high-performance processor is unnecessary. Its 16 I/O lines permit direct management of multiple digital channels, while software PWM implemented with the 8-bit timer/counter can provide dimming and visual effects without a dedicated LED-driver IC. The 20 MHz clock rate provides frequent task scheduling and smooth updates, and the 128 B SRAM is adequate for modest display-state variables. EEPROM can store brightness presets or operating modes across power cycles. Account for the limited 2 KB program space when adding animations, and use transistor or constant-current drive stages rather than driving substantial LED loads directly from the microcontroller pins.
推薦
Small Motor and Valve Control
The ATTINY261A-MU is useful in compact motor, valve, or relay-control subsystems where deterministic switching, local interlocks, and status reporting are required. Timer compare outputs can generate repeatable pulse sequences, while the AVR core can combine limit-switch inputs with timeout logic before energizing an external driver. Sixteen I/O lines allow control signals, feedback inputs, and fault indicators to share one package. The 128 B EEPROM may store calibration values or operating counters, while the 2 KB Flash limit favors compact state-machine firmware. Keep the controller away from high-current switching paths, use protection against inductive transients, and validate timing across the full 1.8 V to 5.5 V supply range.
推薦
Smart Home and IoT Endpoint
The ATTINY261A-MU can serve as a compact IoT endpoint for a local switch, simple occupancy sensor, or low-rate remote-control node. Its 16 I/O lines support digital inputs, outputs, and an interface to a communications module, while the 20 MHz processor handles framing, acknowledgment, and device-state updates. The 2 KB Flash footprint is appropriate for a focused endpoint rather than a gateway, and 128 B of EEPROM can retain network-independent configuration such as calibration values or operating modes. Power the controller within its 1.8 V to 5.5 V range and account for wireless-module current bursts in the supply design. A wake strategy based on the timer/counter can reduce average consumption when the application tolerates delayed response.
推薦
Timing and Event Control Module
The ATTINY261A-MU is well suited to a compact event-control module because its 8-bit timer/counter with compare modes can maintain precise intervals and compare events independently of the main application loop. The controller can timestamp inputs, debounce transitions, operate a countdown, or generate a periodic control pulse across 16 I/O lines. At 20 MHz, it offers sufficient timing resolution for many instrumentation and control tasks while retaining a simple 8-bit software model. Its 128 B SRAM is adequate for counters and state variables, while 128 B of EEPROM can preserve a programmed interval or operating profile. Validate timer accuracy and pin multiplexing against the package documentation, and avoid using the 2 KB program memory for logging functions that could exceed the available storage.
推薦
推薦產品摘要
工程參考資料,適用於 ATTINY261A-MU — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATTINY261-20MU | ATTINY261A-MUR |
|---|---|---|---|
| Package | 32-VQFN (5x5 mm) | 32-VQFN (5x5 mm) | 32-VQFN (5x5 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 2 KB Flash (1K x 16) | 2 KB Flash | 2 KB Flash (1K x 16) |
| EEPROM | 128 B | 128 B | 128 B |
| SRAM | 128 B | 128 B | 128 B |
| General-Purpose I/O | 16 lines | 16 lines | 16 lines |
| Operating Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Device Generation | ATtiny261A enhanced family | ATtiny261 earlier generation | ATtiny261A enhanced family |
主要差異化特點
- Enhanced ATtiny261A generation with a 20 MHz operating point (對比ATTINY261-20MU)
- Exact 32-VQFN ordering configuration for the target design (對比ATTINY261-20MU)
- Matched electrical configuration without a device-generation change (對比ATTINY261-20MU)
設計說明
Create the 32-VQFN footprint from the exact manufacturer package drawing rather than a generic 32-pin QFN footprint. Verify pad dimensions, exposed-pad geometry, solder-mask clearance, and the number and placement of thermal vias. Place input, ground, and decoupling connections close to their associated pins, and route the clock and programming signals away from noisy switching nodes. The 5x5 mm package saves board area but leaves little tolerance for footprint or paste-template errors, so inspect the first assembled article under magnification.
Design the supply for the controller’s complete 1.8 V to 5.5 V operating range and for any attached sensor or communications load. Add local bulk and high-frequency decoupling following the manufacturer’s recommended application circuit, and keep return-current paths short. If the board includes a motor, relay, or wireless transmitter, isolate those switching currents from the AVR supply and provide appropriate protection for transients. Verify brownout behavior at the lowest system voltage because timer accuracy and reliable program execution depend on adequate supply voltage.
Do not underestimate the 2 KB Flash and 128 B SRAM constraints. Avoid adding large libraries, verbose diagnostics, or unbounded buffers that exceed the available program and data space. The ATtiny261A family also includes devices with different Flash densities, so confirm that code intended for ATtiny461A or ATtiny861A does not silently target the wrong controller. For migration from ATtiny261, review Microchip’s AVR531 note because the newer process changes some electrical characteristics even though the migration is functionally drop-in.
合規資訊
The linked ATtiny261/461/861 family document describes AEC-Q100 grade 1 qualification for the original family, but qualification for the exact ATTINY261A-MU ordering code is not established. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require an exact product declaration.