Broadcom

BCM53004B0KPB Communication Processor | Broadcom | LAN

MPN: BCM53004B0KPB ✓ Aktif
60 Package
MOQ: 1 |

BCM53004B0KPB Genel Bakış

Broadcom BCM53004B0KPB is a communication processor listed in the BCM53000 family for wired-network equipment. The device is associated with receiver and transceiver interface applications, while product listings identify it as a communication processor with a 60-pin standard package. Its exact electrical ratings, protocol support, clocking requirements, and operating limits should be established from the Broadcom datasheet before it is placed in a production design.

A communication processor is a specialized semiconductor that coordinates data exchange between a network physical layer and the digital equipment above it. The broader hierarchy is communication processor → network interface controller → interface IC → semiconductor. In this position, the BCM53004B0KPB can provide the processing and control functions required to turn physical-layer signals into usable network data, depending on the specific configuration and firmware supported by the device.

The BCM53004B0KPB is presented by Broadcom for communications and interface duties, making it relevant to products that combine Ethernet connectivity, subscriber access, gateway control, or similar wired-network functions. The “B0” and “KPB” characters identify the ordered manufacturer configuration. Exact suffix meaning, temperature grade, lead finish, and ordering information must be checked against the manufacturer’s ordering guide before procurement.

Unlike a passive connector or simple line driver, a communication processor combines multiple interface functions on one integrated circuit. This integration can simplify the component count on an interface board, but it also makes system-level timing and electrical compatibility critical. Clocking, reference clocks, transceiver interfaces, control registers, power sequencing, and thermal performance must all be evaluated against the complete system architecture.

Typical application directions include broadband access equipment, Ethernet gateways, home-network products, industrial communication equipment, and network-interface controller boards. In these systems, the device’s suitability depends on compatibility with the selected Ethernet PHY, switch fabric, connector arrangement, firmware, clock source, and power tree. BCM53004B0KPB should not be assumed interchangeable with a generic PHY merely because both devices appear in a networking design.

A key engineering practice is to freeze the complete power, clock, and signal-integrity design before layout. Use the manufacturer pin description to assign every power, ground, reset, reference-clock, and high-speed signal connection. Validate termination and impedance-controlled routing against the specified interface speed, and use the manufacturer reference design as the baseline whenever available.

This page consolidates the verified Broadcom BCM53004B0KPB product identity, distributor listing references, application context, procurement information, and engineering checks. It also distinguishes confirmed catalog facts from parameters that require the exact manufacturer datasheet, preventing a general-purpose interface IC from being treated as a qualified drop-in replacement.

Drop-in alternatifler için BCM53004B0KPB — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

BCM53004B0KPB Maksimum Değerlendirmeler & Elektriksel Özellikler

Manufacturer Broadcom
Manufacturer Part Number BCM53004B0KPB
Device Type Communication processor
Application Classification Interface driver, receiver, and transceiver
Standard Package 60

BCM53004B0KPB 60 Pin Yapısı Kılavuzu

BCM53004B0KPB (60 paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

60 paket pin çizelgesi için BCM53004B0KPB

Ayrıntılı pin çıkış verisi mevcut değil: BCM53004B0KPB.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

BCM53004B0KPB için uygundur 6 uygulamas: Broadband Access Equipment, Ethernet Network Gateway, Industrial Communication Controller, Home Networking Equipment, Network Interface Controller Board, Set-Top and Connected Media Equipment.

🌐

Broadband Access Equipment

BCM53004B0KPB can be evaluated for broadband access equipment when its documented communication interfaces match the access controller architecture. The device’s classification as a communication processor makes it more relevant than a simple line driver for designs requiring integrated control between a network physical layer and higher-level equipment. The key implementation checks are reference-clock quality, PHY compatibility, power sequencing, and the exact Broadcom firmware and register configuration. Validate those items against the manufacturer reference design before production, because the available product classification does not by itself guarantee a specific PON, Ethernet, or cable standard.

🌐

Ethernet Network Gateway

The BCM53004B0KPB is suitable for evaluation in an Ethernet gateway where a communication processor is needed alongside a compatible physical layer and network controller. Its role should be established from the manufacturer’s supported interface configuration rather than inferred from the BCM53000 family name. A practical design must account for reference-clock routing, PHY management, reset timing, firmware support, and the timing margin of every high-speed connection. The 60-pin package designation makes board-area planning possible, but the footprint dimensions and pin map must be taken from the official package drawing.

🏭

Industrial Communication Controller

BCM53004B0KPB can be considered for industrial communication equipment when the target interface, timing, environmental range, and lifecycle requirements align with the documented BCM53004B0KPB configuration. Industrial designs benefit from careful isolation of clock and data routes from switching regulators, robust decoupling, and thermal testing across the intended ambient range. Firmware lifecycle and manufacturer support are as important as raw electrical compatibility because network equipment may remain deployed for many years. Use the manufacturer qualification and ordering information to determine whether the ordered suffix is appropriate for the target environment.

📱

Home Networking Equipment

BCM53004B0KPB may fit home-network products when the manufacturer documentation confirms the required Ethernet, control, and clock interfaces. In a router or gateway, the communication processor can sit between a compatible Ethernet PHY and the system’s network-control architecture, reducing reliance on discrete interface functions. The design should reserve clean, short routes for high-speed signals and provide a stable clock source with the jitter required by the interface specification. Before production, confirm that the firmware supports the intended protocol stack and that the ordered part remains active with a viable supply plan.

🖥️

Network Interface Controller Board

BCM53004B0KPB is applicable to a dedicated network-interface controller board when the design requires the supported Broadcom communication-processing functions and can meet the device’s timing and power requirements. Board partitioning should keep the communication processor, memory, reference clock, and PHY interfaces in a controlled signal environment. The 60-pin package designation should be checked against the official land pattern, including any exposed thermal pad and its connection requirements. Validate Ethernet link startup, reset behavior, clock jitter tolerance, and sustained data transfer on prototypes before committing the controller board to high-volume production.

📺

Set-Top and Connected Media Equipment

BCM53004B0KPB can be assessed for connected media equipment when Broadcom documents the required network and peripheral interfaces for the ordered configuration. Such systems may place the communication processor beside an Ethernet PHY or switching component, making clock integrity and software support central design concerns. Keep the interface routing away from display-related switching noise and provide stable supplies according to the manufacturer schematic. Before using the device in a connected product, verify protocol support, firmware ownership, security expectations, operating temperature, and the manufacturer’s long-term lifecycle statement for the exact suffix.

What is the Broadcom BCM53004B0KPB?
The Broadcom BCM53004B0KPB is a communication processor associated with interface driver, receiver, and transceiver applications. Catalog information identifies the device with a 60-pin standard package designation. Its exact Ethernet support, clock requirements, operating voltages, and register functions must be confirmed in the manufacturer datasheet. The component belongs to the Broadcom BCM53000 product family and is intended for wired-network equipment rather than general-purpose logic.
Where can I find the BCM53004B0KPB datasheet PDF?
The BCM53004B0KPB datasheet PDF should be obtained from Broadcom’s official product documentation or an authorized technical-document portal using the exact manufacturer part number. The available catalog references identify BCM53004B0KPB as a communication processor and list its 60-pin package designation, but they do not expose the document revision or a direct manufacturer PDF URL. Use the Broadcom documentation search with BCM53004B0KPB and confirm the document revision against your device lot before design release.
Where is the BCM53004B0KPB pinout?
The BCM53004B0KPB pinout is defined by the Broadcom manufacturer datasheet, which should be consulted for every pin name, direction, recommended connection, and exposed-pad requirement. Catalog records confirm a 60-pin standard package designation but do not provide a trustworthy pin-number table. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks, and do not infer pin functions from similarly named BCM devices.
Where can I buy BCM53004B0KPB online?
The Broadcom BCM53004B0KPB can be requested through the Request a Quote form on this product page. The form is the appropriate route for current unit availability, lot traceability, and an order quotation without presenting a stale price. Before approving a purchase, confirm the exact suffix BCM53004B0KPB rather than a related BCM53004 configuration, and ask for the manufacturer ordering code, temperature grade, and packing option required by the design.
What is the current price of BCM53004B0KPB?
The current BCM53004B0KPB price depends on quantity, supply status, and the exact manufacturer configuration, so use the Request a Quote form on this page for a current commercial quotation. The product is indexed by several catalog channels under the exact part number, but the accessible listings do not expose a usable quantity-break table. Avoid approving a purchase from an unverified family-level price because BCM53000 variants can differ in grade, packing, and production status.
What is the lead time for BCM53004B0KPB?
The current BCM53004B0KPB lead time is not represented by a manufacturer statement on this page. Submit a quantity and target date through the Request a Quote form so the exact suffix, package, and production status can be checked together. For new production programs, request a date-code-controlled supply plan and written confirmation of the manufacturer’s lifecycle status, because an indexed distributor listing does not by itself guarantee ongoing factory availability.
Is BCM53004B0KPB in stock?
BCM53004B0KPB availability is best confirmed through the Request a Quote form for the exact ordered suffix and quantity. The part is indexed in active product catalogs, but no explicit stock quantity is available to confirm immediate allocation. For production planning, ask for factory inventory, authorized-channel stock, and estimated shipment dates separately. Treat an indexed listing as evidence of catalog presence rather than a guaranteed material quantity.
How does BCM53004B0KPB compare with other BCM53004 variants?
BCM53004B0KPB should be compared with another BCM53004 ordering code by suffix, package, temperature grade, lifecycle status, and exact interface configuration. A related suffix may share the same core device while differing in environmental or orderable attributes, so package equality alone does not prove exact interchangeability. Use the Broadcom ordering guide and datasheet to determine whether the other code has the same pin assignment, clock interface, power requirements, and qualification level.
When should I choose BCM53004B0KPB over another interface controller?
Choose BCM53004B0KPB when the design specifically requires the Broadcom BCM53000 communication-processor architecture, its documented interfaces, and its supported operating configuration. It is preferable to a generic Ethernet PHY when integrated communication processing and controller-level functions are required. Select another device instead when its interface set, firmware support, clocking architecture, package, lifecycle plan, or thermal performance offers a closer match to the complete system requirement.
Is BCM53004B0KPB suitable for Ethernet gateway designs?
BCM53004B0KPB can be considered for an Ethernet gateway design when its documented media interfaces, protocol requirements, and control functions match the gateway architecture. The catalog classification as a communication processor supports evaluation for wired-networking equipment. Final suitability depends on the selected Ethernet PHY, switch interface, firmware, reference clock, power architecture, and system timing. Validate the complete signal chain in hardware before committing to production.
What can replace BCM53004B0KPB?
No confirmed drop-in replacement for BCM53004B0KPB is established by the available cross-reference information. A valid replacement must use the same package and pin arrangement and must meet or exceed the required electrical, timing, protocol, thermal, and lifecycle constraints. Generic PHY devices and other BCM53000 suffixes are not automatically replacements. Ask the manufacturer for approved second-source guidance or use a qualified engineering cross-reference process before changing the PCB or firmware.
Is BCM53004B0KPB the same as BCM53004B0KPBG?
BCM53004B0KPB and BCM53004B0KPBG should not be treated as identical without checking Broadcom’s ordering guide and environmental-compliance documentation. The trailing G commonly denotes an environmental or lead-finish distinction, but its formal meaning must come from the manufacturer documentation. Even if the electrical die and pinout are shared, procurement and qualification requirements may differ. Verify the exact ordering code, package, temperature grade, and shipment form before substitution.
What are the key specifications of BCM53004B0KPB that engineers should know?
The key confirmed catalog specifications for BCM53004B0KPB are its Broadcom manufacturer identity, communication-processor classification, interface driver/receiver/transceiver role, and 60-pin standard package designation. Exact voltage, frequency, data-rate, temperature, and environmental ratings require the manufacturer datasheet. Those values determine clock headroom, power-tree design, thermal capability, and high-speed layout, so they must be established before the part is treated as production-ready.
Does BCM53004B0KPB require a specific reference clock?
The BCM53004B0KPB reference-clock configuration must be taken directly from the manufacturer datasheet, including frequency, tolerance, jitter, coupling, and startup requirements. Because it is a communication processor, clock quality can affect interface timing, synchronization, and system-level margins. Use the manufacturer reference design to select the oscillator and clock-routing topology, keep the clock away from noisy switching nodes, and test the complete interface under worst-case supply and temperature conditions.
How should BCM53004B0KPB power and layout be designed?
Design the BCM53004B0KPB power and layout around the manufacturer reference schematic and pin-description table. Place supply and ground connections according to the datasheet, keep high-speed interface traces short and impedance controlled, and separate clock and sensitive signal routing from switching power nodes. Decoupling values must follow the manufacturer guidance. Prototype the power sequencing and interface eye or timing behavior before releasing the PCB, since catalog information alone cannot validate these implementation details.

Mühendislik referans verileri: BCM53004B0KPB — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose BCM53004B0KPB when the design requires the specific Broadcom BCM53000 communication-processor architecture and its manufacturer-supported interface configuration. It is best suited to wired-network equipment where controller-level processing, reference clocks, physical-layer coordination, and firmware support are central requirements. Do not select it merely because another candidate offers similar Ethernet functionality; interface timing, PHY compatibility, clock topology, firmware, package, thermal performance, and lifecycle must agree. No confirmed drop-in substitute is established here, so a new design should use BCM53004B0KPB directly. A cost-reduction or second-source effort should begin only after Broadcom identifies an approved ordering variant with an identical pin configuration and equivalent qualification. For existing boards, compare the complete ordering suffix before making any substitution.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Package 60-pin standard package designation
Brand Broadcom
Manufacturer Part Number BCM53004B0KPB
Device Type Communication processor
Interface Classification Driver, receiver, and transceiver

Ana Farklılayıcılar

  • Broadcom communication-processor positioning (karşılaştırma:BCM53004B0KPBG)
  • Exact 60-pin package designation (karşılaştırma:Generic Ethernet PHY devices)
  • Interface-focused component classification (karşılaştırma:General-purpose microcontrollers)

Tasarım Notları

Use the Broadcom reference layout as the baseline for the BCM53004B0KPB rather than adapting an unrelated communication-processor footprint. Route reference-clock and high-speed interface traces over continuous reference planes, keep them short, and avoid test pads or package-edge discontinuities where possible. Match trace geometry to the documented interface impedance and place PHY, clock source, and decoupling networks close to their associated pins. The 60-pin catalog designation does not by itself define the land pattern, so verify every pad against the official package drawing.

Build the BCM53004B0KPB power tree from the manufacturer’s recommended schematic, including the exact supply rails, sequencing requirements, and decoupling values. Place each decoupling capacitor adjacent to its specified supply pin and provide a low-impedance return path on the ground plane. Avoid assigning supply-pin functions by analogy with another BCM device. Validate startup, reset release, rail ripple, and high-speed interface performance across expected load and temperature conditions because those operating details are not established by the distributor listing.

Do not treat a similarly named BCM53004 ordering code as an automatic substitute. Confirm the exact pinout, die configuration, interface set, temperature grade, environmental qualification, packing method, and lifecycle status in the Broadcom ordering guide and datasheet. Firmware support and PHY compatibility can be more restrictive than package equality, so a replacement must be validated electrically and functionally. Preserve traceability by using the full BCM53004B0KPB ordering code in the BOM and purchase records.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for BCM53004B0KPB in the available product references.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

BCM53004B0KPB datasheet BCM53004B0KPB pinout BCM53004B0KPB datasheet pdf BCM53004B0KPB equivalent BCM53004B0KPB replacement BCM53004B0KPB footprint Broadcom BCM53004B0KPB BCM53004B0KPB price BCM53004B0KPB stock BCM53004B0KPB 60 pin BCM53004 communication processor BCM53004B0KPB Ethernet gateway

İlgili Bileşenler ve Terimler

Broadcom BCM53004B0KPB BCM53004B0KPBG BCM53000 communication processor interface IC network interface controller driver receiver transceiver wired-network equipment Ethernet gateway broadband access reference clock PHY 60-pin package RoHS REACH AEC-Q100 lead-free packaging LAN7500I-ABZJ-TR KSZ8081RNACA KSZ8041RNL-TR VSC8564XKS-14
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle