Broadcom

BCM5488SA7IPB - Octal Gigabit Ethernet Transceiver | Broadcom

MPN: BCM5488SA7IPB ✓ Aktif
484-pin PBGA Package
MOQ: 1 |

BCM5488SA7IPB Genel Bakış

Broadcom BCM5488SA7IPB is an Ethernet transceiver device described in distributor catalogs as an eight-channel full/half-duplex 10/100/1000BASE transceiver, supplied in a 484-pin PBGA package. The device is positioned for multiport networking equipment, where one transceiver IC can support several copper Ethernet ports while providing a consolidated interface to the host processor. Its specified 1000 Mbps class operation is suitable for Gigabit Ethernet endpoints, although the exact channel organization and signal details must be confirmed from the manufacturer documentation for each production configuration.

An Ethernet transceiver is an interface integrated circuit that converts between digital data and electrical signaling on twisted-pair Ethernet cables. Within the network interface hierarchy, a transceiver sits between a MAC or switching ASIC and the physical network, handling the physical-layer functions needed for 10BASE-T, 100BASE-TX, and 1000BASE-T links. The BCM5488SA7IPB therefore belongs to the broader Ethernet PHY, interface IC, networking semiconductor, and semiconductor categories rather than functioning as a general-purpose processor.

The principal cataloged feature is support for full- and half-duplex 10/100/1000BASE operation across an eight-channel arrangement. A multiport device can simplify board routing and reduce the number of separate PHY packages compared with discrete single-port implementations. Distributor records also associate the component with Gigabit Ethernet transceiver functions, making it relevant to switches, routers, network appliances, industrial Ethernet equipment, and multiport Ethernet line cards. Exact interface voltage, media reach, cable-length, power, and environmental limits are not stated in the available catalog excerpts.

The BCM5488SA7IPB uses an integrated-circuit architecture intended to bridge a network-switching or packet-processing ASIC with copper Ethernet physical layers. Its 484-pin PBGA provides a large, high-pin-count surface-mount footprint suitable for complex, high-speed mixed-signal circuitry. Such packages demand careful power-plane distribution, ground-return design, decoupling, and via-in-pad or fanout strategies so that high-speed differential pairs and sensitive transceiver references maintain controlled impedance and return paths.

Typical deployment points include eight-port Gigabit Ethernet switches, router interfaces, network interface controllers, industrial control cabinets, and communications equipment with multiple 10/100/1000BASE ports. In these systems, the transceiver simplifies physical-layer implementation while the host ASIC handles packet processing, port arbitration, and higher-level protocol functions. Multicomponent boards should confirm cable-media support, autonegotiation behavior, register compatibility, and thermal performance before production release.

The primary design consideration is that a high-pin-count PBGA must be treated as a complete RF-controlled and thermally managed layout, not as a generic digital component. Place the device according to its recommended footprint, preserve continuous supply and ground planes, decouple each supply domain at its pins, and route each Ethernet differential pair as a controlled-impedance pair. Verify magnetics or coupling components, line-side protection, isolation spacing, and return-path continuity against the applicable reference design.

This product record combines cataloged device identity, packaging, sourcing information, technical context, application guidance, and a compatibility-focused comparison. Engineers should use it to identify whether the BCM5488SA7IPB belongs in the architecture, then confirm every unreleased electrical limit, pin function, register, and lifecycle decision against the current Broadcom technical documentation before schematic release or production procurement.

Drop-in alternatifler için BCM5488SA7IPB — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

BCM5461SA1IPFG

✅ Yerleştirme
📦 484-pin PBGA
The cataloged BCM5488SA7IPB has eight 10/100/1000BASE channels, while BCM5461SA1IPFG is a different Broadcom Ethernet family with at least one functional configuration difference; exact channel-count and electrical deltas are not published in the comparison excerpt.

📋 Katalogda Olmayan Referans Alternatifi

BCM54220SB0IFBG

✅ Yerleştirme
📦 484-pin PBGA
The BCM54220SB0IFBG is a different Broadcom Ethernet transceiver family; it supports Gigabit Ethernet operation but its published configuration differs from the BCM5488SA7IPB's eight-channel 10/100/1000BASE arrangement, and exact electrical deltas are not stated in the available excerpt.

📋 Katalogda Olmayan Referans Alternatifi

BCM5488SA7IPB Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Ethernet transceiver
Ethernet Support 10/100/1000BASE
Cataloged Channel Arrangement 8 channels
Duplex Support Full and half duplex
Maximum Data Rate 1000 Mbps
Paket 484-pin PBGA
Montaj Türü Surface mount
Ethernet Application Copper Ethernet physical-layer interface

BCM5488SA7IPB 484-pin pbga Pin Yapısı Kılavuzu

BCM5488SA7IPB (484-pin pbga paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

484-pin pbga paket pin çizelgesi için BCM5488SA7IPB

Ayrıntılı pin çıkış verisi mevcut değil: BCM5488SA7IPB.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

BCM5488SA7IPB için uygundur 6 uygulamas: Eight-Port Gigabit Ethernet Switch, Industrial Network Gateway, Router Network Interface, Telecommunications Access Equipment, Industrial Control Cabinet, Network Appliance Interface Card.

🌐

Eight-Port Gigabit Ethernet Switch

The BCM5488SA7IPB fits an eight-port switch line card because its cataloged configuration provides eight full- or half-duplex 10/100/1000BASE channels in one 484-pin PBGA. Consolidating the physical-layer functions can simplify the relationship between copper ports and a host switching ASIC while reducing the number of transceiver packages. The implementation still requires verification of each port's media support, auto-negotiation behavior, line-side circuitry, and common-mode compatibility. PCB planning should provide continuous supply and ground planes, short decoupling paths, and controlled-impedance differential routing for every Ethernet channel.

🏭

Industrial Network Gateway

The BCM5488SA7IPB can support a multiport industrial Ethernet gateway where controllers, sensors, and remote equipment require 10/100/1000BASE connectivity. Its eight-channel arrangement allows a gateway to consolidate several copper links while the host processor manages protocols, alarms, and local control functions. Qualification for an industrial environment depends on confirming the operating-temperature range, isolation architecture, ESD protection, and EMC performance for the finished system. The dense PBGA also concentrates heat, so thermal simulation and copper spreading around the device should be completed before enclosure qualification.

🌐

Router Network Interface

The BCM5488SA7IPB is applicable to router and routing-interface designs that require multiple copper Ethernet ports on one board. Its eight 10/100/1000BASE channels can provide physical-layer connectivity behind a routing or packet-processing ASIC, avoiding a board populated with separate single-port PHY packages. Engineering review must confirm host bus width, clock requirements, register initialization, and whether the selected Broadcom configuration supports all eight ports simultaneously. High-speed traces from the host ASIC to the PBGA should be length-matched and routed over continuous reference planes to minimize data-integrity risk.

🌐

Telecommunications Access Equipment

The BCM5488SA7IPB can serve in telecommunications access equipment requiring multiple Gigabit Ethernet physical interfaces for service nodes or aggregation hardware. Consolidating eight channels on one high-pin-count PBGA supports compact line-card designs where space and component count are important. Deployment suitability must be validated against the controlled Broadcom specifications for temperature, power, EMC, and cable reach, as these values are not established by the catalog excerpts. The layout should also accommodate telecom magnetics or coupling components, surge protection, and the isolation spacing required by the target product category.

🏭

Industrial Control Cabinet

The BCM5488SA7IPB is suitable for consideration in industrial control cabinets that connect programmable controllers, vision equipment, remote I/O, and service laptops over copper Ethernet. The eight-channel architecture allows several links to share a compact physical-layer subsystem while supporting links at 10, 100, or 1000 Mbps. A production design should confirm port-level media features and environmental limits rather than assuming that every channel has identical configuration. Robust line-side protection, isolated magnetics, grounded chassis interfaces, and a power budget that accounts for eight simultaneous links are essential implementation requirements.

🖥️

Network Appliance Interface Card

The BCM5488SA7IPB can serve in a network appliance interface card where several Gigabit Ethernet ports are exposed to users, storage systems, or upstream equipment. Its cataloged eight-channel 10/100/1000BASE capability supports a consolidated physical layer, while a host ASIC or processor performs packet processing. The design team must confirm boot behavior, management-register access, firmware support, and thermal dissipation for the populated board. Because a 484-pin PBGA limits routing options, use the recommended via pattern and land geometry, and inspect assembled X-ray results to identify voiding or via defects that could compromise thermal and electrical performance.

Önerilen Ürünler Özeti

BCM5488SA7IPBG Same Broadcom BCM5488 family ordering variant Kullanıldığı Yer: Eight-Port Gigabit Ethernet Switch, Industrial Network Gateway, Industrial Control Cabinet BCM5461SA1IPFG Broadcom Ethernet transceiver comparison candidate Kullanıldığı Yer: Router Network Interface, Network Appliance Interface Card BCM54220SB0IFBG Broadcom Gigabit Ethernet transceiver comparison candidate Kullanıldığı Yer: Telecommunications Access Equipment
What is the BCM5488SA7IPB?
The BCM5488SA7IPB is a Broadcom Ethernet transceiver cataloged for eight full- or half-duplex 10/100/1000BASE channels in a 484-pin PBGA package. Distributor product records identify it as an eight-channel transceiver, while another catalog entry describes a 1 Gbps PHY function. The device is intended for multiport copper Ethernet equipment connected to a host switching or packet-processing ASIC.
What package does BCM5488SA7IPB use?
The BCM5488SA7IPB uses a 484-pin PBGA package. A PBGA provides dense external connectivity for a high-speed, multiport transceiver but also requires careful plane management, thermal design, and controlled-impedance routing. Use the Broadcom land pattern and pin assignment when laying out the PCB rather than inferring connections from a generic BGA footprint.
What Ethernet speeds does BCM5488SA7IPB support?
The BCM5488SA7IPB is cataloged for 10/100/1000BASE operation, with a maximum listed data rate of 1000 Mbps. It is designed for copper Ethernet physical-layer interfaces requiring support for 10 Mbps, 100 Mbps, and 1 Gbps operation. Confirm whether all eight ports support every listed rate in the current Broadcom configuration documentation.
Where can I download the BCM5488SA7IPB datasheet?
The BCM5488SA7IPB datasheet and final pin descriptions should be obtained from Broadcom's controlled technical-document portal or from the manufacturer link associated with the product. Distributor listings provide an entry point for documentation, but only the Broadcom-controlled document establishes authoritative electrical limits, register definitions, package drawings, and qualification status.
Where can I find the BCM5488SA7IPB pinout?
The BCM5488SA7IPB pinout is defined by the 484-pin PBGA package drawings and the device's controlled pin-description table in the Broadcom documentation. Because this is a high-pin-count mixed-signal device, the footprint coordinates and signal assignments must be taken from the exact BCM5488SA7IPB documentation rather than reconstructed from a generic PBGA library.
Where can I buy BCM5488SA7IPB and check current lead time?
Use the Request a Quote form on this page to ask about BCM5488SA7IPB availability, minimum order quantity, and current lead time. The part is a specialized multiport Ethernet transceiver in a 484-pin PBGA, so production planning should also account for assembly capacity, long-term supply, and any manufacturer change notifications before committing a build schedule.
What is the price of BCM5488SA7IPB?
Current BCM5488SA7IPB pricing is handled through the Request a Quote form on this page because transaction conditions and quantities can change. For a production request, include the required order quantity, date code or lot preference, target packaging, delivery location, and whether the device must be sourced as an exact Broadcom part rather than an aftermarket assembly.
Is BCM5488SA7IPB in stock?
Current BCM5488SA7IPB stock should be confirmed through the Request a Quote form on this page. Marketplace and distributor catalog records may lag finished-good availability, especially for a high-pin-count PBGA, so confirm stock, traceable lot status, date code, and delivery schedule against the actual order quantity before releasing a purchase order.
What is the lead time for BCM5488SA7IPB?
The current lead time for BCM5488SA7IPB must be obtained through the Request a Quote form on this page. Lead time can depend on quantity, manufacturing status, component availability, and the required shipping destination. For production planning, request both the earliest delivery and the latest date on which an order can still meet the assembly schedule.
Can BCM5488SA7IPB be used in an eight-port Gigabit switch?
Yes, the BCM5488SA7IPB is architecturally suited to an eight-port Gigabit Ethernet switch because catalog records identify eight 10/100/1000BASE channels. Its suitability depends on confirming the exact per-port feature set, host interface, copper-media support, clocking, register compatibility, and thermal limits in the Broadcom documentation before assigning all eight physical ports.
What is the difference between BCM5488SA7IPB and BCM5461SA1IPFG?
The BCM5488SA7IPB is cataloged as an eight-channel 10/100/1000BASE transceiver in a 484-pin PBGA, while the comparison result for BCM5461SA1IPFG identifies a different Broadcom Ethernet family. Their channel count, host interface, feature set, and programming model may differ, so BCM5461SA1IPFG should not be treated as a drop-in replacement without a complete pin, register, and electrical review.
What is the difference between BCM5488SA7IPB and BCM54220SB0IFBG?
The BCM54220SB0IFBG belongs to a different Broadcom Ethernet transceiver family, while the BCM5488SA7IPB is cataloged as an eight-channel 10/100/1000BASE device in a 484-pin PBGA. The available comparison does not establish identical pin assignments, register maps, media support, or thermal limits, so the BCM54220SB0IFBG is a functional comparison candidate rather than a confirmed drop-in substitute.
What can replace BCM5488SA7IPB?
No confirmed drop-in replacement for the BCM5488SA7IPB can be established from the available catalog information. A valid replacement must use the same 484-pin PBGA land pattern, preserve every power, ground, clock, data, and PHY signal assignment, and maintain the required 10/100/1000BASE behavior and host-side register compatibility. Do not substitute solely because another Broadcom Ethernet transceiver supports Gigabit Ethernet.
When should I choose BCM5488SA7IPB over a single-port PHY?
Choose the BCM5488SA7IPB when an eight-port copper Ethernet design benefits from consolidating multiple physical-layer channels into one 484-pin PBGA device. Compared with eight separate single-port PHYs, it may reduce package count and simplify shared clock or power distribution, but it concentrates thermal load and makes host-interface, registration, and layout compatibility more dependent on the exact Broadcom implementation.
What are the key specifications of BCM5488SA7IPB that engineers should know?
The key cataloged specifications are eight channels, 10/100/1000BASE Ethernet support, full- and half-duplex operation, a maximum listed rate of 1000 Mbps, and a 484-pin PBGA package. Supply voltage, power consumption, temperature range, cable reach, media-interface details, and thermal limits require confirmation from the current Broadcom technical documentation before schematic and thermal sign-off.
Is BCM5488SA7IPB suitable for industrial networking equipment?
The BCM5488SA7IPB can be considered for multiport industrial Ethernet equipment when its electrical and environmental ratings satisfy the target installation conditions. The multiport 10/100/1000BASE architecture fits network gateways, controllers, and communications equipment, but industrial suitability must be established using the confirmed operating-temperature range, isolation requirements, EMC design, and AEC-Q100 status where applicable.

Mühendislik referans verileri: BCM5488SA7IPB — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the BCM5488SA7IPB when a multiport copper Ethernet design requires eight cataloged 10/100/1000BASE channels in a single 484-pin PBGA, particularly for switches, routers, gateways, and network appliance interface cards. Its consolidated channel count can simplify physical-layer integration, but the dense package concentrates routing and thermal demands. Consider BCM5461SA1IPFG only after verifying its channel configuration, host interface, register map, and every BGA assignment against the target design. Consider BCM54220SB0IFBG for a different Broadcom Ethernet architecture only when an engineering review confirms electrical, protocol, thermal, and layout compatibility. Neither comparison candidate should be treated as a drop-in replacement based solely on Ethernet capability or PBGA packaging. Final selection should rely on the current Broadcom documentation, production status, availability, and qualification requirements.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün BCM5461SA1IPFG BCM54220SB0IFBG
Brand Broadcom Broadcom Broadcom
Package 484-pin PBGA 484-pin PBGA 484-pin PBGA
Ethernet Support 10/100/1000BASE 10/100/1000BASE Ethernet family Gigabit Ethernet family
Mounting Type Surface mount Surface mount Surface mount

Ana Farklılayıcılar

  • Eight-channel physical-layer integration (karşılaştırma:BCM5461SA1IPFG)
  • Full- and half-duplex multiport support (karşılaştırma:BCM5461SA1IPFG)
  • Documented 484-pin PBGA footprint (karşılaştırma:BCM54220SB0IFBG)

Tasarım Notları

Treat the 484-pin PBGA as a high-speed mixed-signal layout. Use the controlled Broadcom land pattern, place local decoupling at the relevant supply pins, maintain uninterrupted reference planes beneath the device, and route Ethernet differential pairs as short, continuously referenced traces. Verify via construction against the package and assembly requirements rather than relying on a generic BGA via-in-pad rule.

Eight simultaneous 1 Gbps channels can concentrate heat around the PBGA. Calculate dissipation from the confirmed supply voltage and total current for the populated board, model the package and board construction, and provide copper spreading, airflow, or a thermal interface appropriate to the enclosure. Validate the hottest expected operating condition, because an eight-port configuration can be materially hotter than a single-port test configuration.

Preserve return paths and impedance continuity from the transceiver pins to the line-side network interface. Keep the digital host interface and sensitive analog or clock references away from copper and magnetics where practical, use short ground-via fences at interface boundaries, and apply the controlled reference design's via and breakout geometry. After fabrication, verify impedance coupons and inspect BGA assembly for voids that could alter thermal behavior.

Do not treat another Broadcom Gigabit Ethernet transceiver as interchangeable merely because it uses a PBGA. Before replacing the BCM5488SA7IPB, compare every BGA assignment, power domain, ground reference, clock input, management interface, reset connection, and media-side signal. Also confirm register initialization and supported operating modes; a footprint match alone does not establish functional or production compatibility.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The available catalog records do not provide authoritative environmental or qualification declarations for the exact device.

Veri doğrulanma tarihi: 2026-11-20 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

BCM5488SA7IPB BCM5488SA7IPB datasheet BCM5488SA7IPB datasheet pdf BCM5488SA7IPB pinout BCM5488SA7IPB footprint BCM5488SA7IPB specifications BCM5488SA7IPB equivalent BCM5488SA7IPB replacement BCM5488SA7IPB cross reference BCM5488SA7IPB vs BCM5461SA1IPFG BCM5488SA7IPB vs BCM54220SB0IFBG Broadcom BCM5488SA7IPB BCM5488SA7IPB price BCM5488SA7IPB stock BCM5488SA7IPB application circuit

İlgili Bileşenler ve Terimler

Broadcom BCM5488SA7IPB BCM5488SA7IPBG BCM5461SA1IPFG BCM54220SB0IFBG Ethernet transceiver Ethernet PHY physical-layer interface 10/100/1000BASE Gigabit Ethernet multiport Ethernet network interface interface IC networking semiconductor 484-pin PBGA BGA package surface-mount technology full duplex half duplex 1000 Mbps controlled-impedance routing Ethernet differential pair line-side interface host switching ASIC
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle