Silicon Labs

C8051F061-GQ - 25MHz 8-Bit MCU with 64KB Flash | Silicon Labs

MPN: C8051F061-GQ ✓ Aktif
2.7V to 3.6V Vdss 64-TQFP (10mm x 10mm) Package 25 MHz Speed 64KB (64K x 8) Memory
MOQ: 1 |

C8051F061-GQ Genel Bakış

The Silicon Labs C8051F061-GQ is a mixed-signal 8-bit microcontroller with a 25 MHz CIP-51 core, 64KB of in-system programmable flash memory, and 4.25KB of RAM in a 64-TQFP package. It combines an 8051-compatible architecture with two separate 16-bit SAR ADCs, CAN connectivity, and dedicated mixed-signal resources for embedded control systems.

An 8-bit microcontroller is a compact programmable controller that executes embedded software and interacts with sensors, actuators, communications networks, and human-machine interfaces. The C8051F061 belongs to the C8051F06x family, combining the C8051 architecture with mixed-signal peripherals. Its 25 MHz clock rate supports faster control-loop execution than conventional legacy 8051 devices while retaining 8051-compatible software compatibility.

The principal features of the C8051F061-GQ include 64KB of ISP flash, 4.25KB of RAM, two independent 16-bit successive-approximation ADCs, a CAN interface, and operation from a 2.7V to 3.6V supply. Two separate converters allow measurements and signal acquisition to be handled independently, which is useful when analog inputs require different sampling schedules, reference conditions, or gain settings.

The device uses Silicon Labs’ CIP-51 core, a pipelined 8051-compatible processor architecture designed for higher execution performance than the original 8051 core. Its in-system programmable flash permits firmware to be programmed or updated while the device is connected to the target system, reducing assembly and service effort. The C8051F061-GQ also provides an external memory interface, timers, serial interfaces, and mixed-signal peripherals suited to industrial control and embedded communication equipment.

Typical applications include industrial controllers, CAN-connected sensor nodes, data-acquisition equipment, motor and actuator controllers, instrumentation, and compact embedded systems that require both digital control and analog measurement. The 64-TQFP package exposes a broad peripheral set and keeps the solution physically manageable for multilayer control boards.

PCB design should preserve clean separation between analog and digital return paths, place decoupling capacitors close to the supply pins, and route high-impedance sensor inputs away from switching nodes and communication traces. Firmware should also initialize unused peripheral pins explicitly because the 64-pin mixed-signal design offers more I/O flexibility than a conventional small-pin-count 8051.

This product page consolidates the manufacturer’s mixed-signal MCU characteristics, verified distributor identification, same-family drop-in options, pin-package considerations, and application-oriented design guidance. It is intended to help engineers select the correct package, evaluate peripheral compatibility, and plan firmware and PCB integration for C8051F061-GQ designs.

Drop-in alternatifler için C8051F061-GQ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller C8051F061-GQ (aynı form faktörü ve ayağa oturma) — farklı olan ADC Resolution, Flash Memory, Package, ADC Sampling Rate, In-System Programming.

Silicon Labs
ADC Resolution: 16 bits
Flash Memory: 64 KB
Package: 100-pin TQFP, 14 mm x 14 mm
İle Karşılaştır C8051F061-GQ →
Silicon Labs
ADC Resolution: 16 bit
Flash Memory: 64 KB (64K x 8)
Package: 100-pin TQFP (14 mm x 14 mm)
İle Karşılaştır C8051F061-GQ →
Silicon Labs
ADC Resolution: 16 bit
Flash Memory: 64 KB (64K x 8)
Package: 100-pin TQFP (14 mm x 14 mm)
İle Karşılaştır C8051F061-GQ →

C8051F060-GQ

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Silicon Labs
📦 64-TQFP (10mm x 10mm)
8-bit mixed-signal microcontroller · 8051-compatible CIP-51 core · 25 MHz · 64 KB · 64K x 8 bits · 4,352 bytes (4,096 + 256 bytes) · 59 pins · 2

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

C8051F062-GQ

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-TQFP (10mm x 10mm)
Core speed and flash rating remain 25 MHz and 64KB, while the ADC and peripheral mix changes by 1 device configuration.

📋 Katalogda Olmayan Referans Alternatifi

C8051F063-GQ

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-TQFP (10mm x 10mm)
Core speed and flash rating remain 25 MHz and 64KB, with a 1-family-level change in ADC, DAC, and peripheral implementation.

📋 Katalogda Olmayan Referans Alternatifi

C8051F064-GQ

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-TQFP (10mm x 10mm)
Core speed and flash rating remain 25 MHz and 64KB, while the mixed-signal feature allocation differs across 1 device variant.

📋 Katalogda Olmayan Referans Alternatifi

C8051F065-GQ

✅ Yerleştirme
📦 64-TQFP (10mm x 10mm)
Core speed and flash rating remain 25 MHz and 64KB, with 1 family-level difference in ADC, DAC, and communication peripheral configuration.

📋 Katalogda Olmayan Referans Alternatifi

C8051F061-GQ Maksimum Değerlendirmeler & Elektriksel Özellikler

Microcontroller Type 8-bit mixed-signal microcontroller
Core Architecture 8051-compatible CIP-51 core
Azami Saat Hızı 25 MHz
Flash Memory 64KB (64K x 8)
Program Memory Type In-system programmable flash
RAM 4.25KB (4352 bytes: 4096 + 256 bytes)
ADC Resolution 16-bit SAR
ADC Configuration Two separate 16-bit SAR ADCs
Connectivity CAN controller
Supply Voltage Range 2.7V to 3.6V
Paket 64-TQFP (10mm x 10mm)
Pin Sayısı 64 pins
Montaj Türü Surface mount
Series C8051F06x
Execution Model High-speed pipelined architecture
ADC2 Reference VREF2 input shared with ADC2
RoHS Durumu Unknown
REACH Status Unknown
AEC-Q100 Qualification Not applicable

C8051F061-GQ 64-tqfp (10mm x 10mm) Pin Yapısı Kılavuzu

C8051F061-GQ (64-tqfp (10mm x 10mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

64-tqfp (10mm x 10mm) paket pin çizelgesi için C8051F061-GQ

Ayrıntılı pin çıkış verisi mevcut değil: C8051F061-GQ.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

C8051F061-GQ için uygundur 6 uygulamas: CAN-Connected Industrial Sensor Nodes, Industrial Data-Acquisition Equipment, Motor and Actuator Control, Industrial Instrumentation and Signal Conditioning, CAN-Based Environmental Monitoring, Embedded Programmable Control Equipment.

🏭

CAN-Connected Industrial Sensor Nodes

The C8051F061-GQ fits CAN-connected sensor nodes because it combines an integrated CAN controller with two separate 16-bit SAR ADCs in one 64-TQFP device. A sensor interface can use the converters for process measurements while the 25 MHz CIP-51 core handles conditioning, filtering, local decisions, and CAN message formatting. Its 64KB ISP flash provides substantial room for protocol drivers and application firmware, while 4.25KB of RAM supports buffers and stack space. The 2.7V to 3.6V operating range also simplifies integration with 3.3V industrial electronics.

📊

Industrial Data-Acquisition Equipment

The C8051F061-GQ is appropriate for compact multi-channel data-acquisition equipment where two independent 16-bit SAR ADCs improve measurement organization. Separate converters can sample different analog inputs under different timing or reference conditions, while the 25 MHz core performs scaling, filtering, calibration, and host transfers. The 64KB in-system programmable flash supports acquisition routines and communication protocols, and 4.25KB of RAM can hold sample buffers. Board designers should follow the datasheet guidance for VREF2, analog grounding, and high-impedance input routing.

🔧

Motor and Actuator Control

The C8051F061-GQ can serve as the control core in motor and actuator systems requiring deterministic embedded timing, mixed-signal feedback, and network communication. Its 25 MHz CIP-51 core can execute position or process-control algorithms, while the two 16-bit SAR ADCs monitor current, position, temperature, or analog command signals. CAN connectivity permits coordinated operation with other machine controllers. The 64-TQFP package exposes the required control and communication signals, but motor traces must be separated from analog inputs and protected against switching transients.

🧰

Industrial Instrumentation and Signal Conditioning

The C8051F061-GQ is well suited to instrumentation that measures low-level analog signals and performs local signal conditioning. Two 16-bit SAR ADCs can acquire inputs with different sampling requirements, and the 25 MHz processor can apply offsets, gains, filtering, compensation, and unit conversion. Its 64KB flash accommodates calibration tables and embedded user interface logic, while CAN can expose processed measurements to a supervisory system. The 3.3V supply range simplifies integration, although analog reference and bypass layout remain critical to measurement repeatability.

🌐

CAN-Based Environmental Monitoring

The C8051F061-GQ can support environmental monitoring stations that combine analog sensors with centralized CAN communication. Temperature, humidity, pressure, or gas sensors can be sampled through the two 16-bit SAR ADCs, while the 25 MHz core performs local filtering, thresholding, compensation, and event logging. Its 64KB ISP flash supports protocol handling and firmware updates, and 4.25KB of RAM is suitable for short measurement histories and communication frames. Because sensors may be connected by long cables, add external protection and consider galvanic isolation at the system level.

⚙️

Embedded Programmable Control Equipment

The C8051F061-GQ suits embedded programmable controllers that must combine logic execution, analog supervision, and field-bus communication. Its 25 MHz 8051-compatible core simplifies migration from established C8051 software, while 64KB of ISP flash allows controlled firmware updates in the finished assembly. Two 16-bit SAR ADCs can monitor supply rails, process values, or operator controls, and CAN provides a deterministic communications path. Firmware should configure unused pins explicitly and include watchdog, brownout, and communications-error handling appropriate to the final equipment.

Önerilen Ürünler Özeti

C8051F061-GQ Silicon Labs Kullanıldığı Yer: CAN-Connected Industrial Sensor Nodes, Industrial Data-Acquisition Equipment, Motor and Actuator Control, Industrial Instrumentation and Signal Conditioning, CAN-Based Environmental Monitoring, Embedded Programmable Control Equipment C8051F065-GQ Same-package C8051F06x family alternative Kullanıldığı Yer: CAN-Connected Industrial Sensor Nodes, Embedded Programmable Control Equipment C8051F060-GQ Silicon Labs Kullanıldığı Yer: Industrial Data-Acquisition Equipment C8051F062-GQ Same-package C8051F06x control alternative Kullanıldığı Yer: Motor and Actuator Control C8051F063-GQ Same-package instrumentation family alternative Kullanıldığı Yer: Industrial Instrumentation and Signal Conditioning C8051F064-GQ Same-package C8051F06x family alternative Kullanıldığı Yer: CAN-Based Environmental Monitoring
What are the key specifications of C8051F061-GQ that engineers should know?
The C8051F061-GQ is a 25 MHz mixed-signal 8-bit microcontroller with 64KB of in-system programmable flash, 4.25KB of RAM, two 16-bit SAR ADCs, and CAN connectivity in a 64-TQFP package. According to the Silicon Labs C8051F06x datasheet, it uses an 8051-compatible CIP-51 core and operates from a 2.7V to 3.6V supply. These characteristics position it as a capable controller for industrial monitoring, CAN-connected equipment, instrumentation, and embedded systems requiring mixed-signal acquisition.
What is the operating voltage of the C8051F061-GQ microcontroller?
The C8051F061-GQ operates from 2.7V to 3.6V. According to the Silicon Labs C8051F06x datasheet, this supply range supports a 25 MHz CIP-51 core, 64KB of ISP flash, and 4.25KB of RAM. PCB power planning should therefore target a regulated 3.3V rail, while digital and analog circuitry must remain within the specified 2.7V to 3.6V device limits across temperature and load.
How much flash and RAM does the C8051F061-GQ have?
The C8051F061-GQ contains 64KB of in-system programmable flash and 4.25KB of RAM, equivalent to 4352 bytes divided into 4096 bytes and 256 bytes. According to the Silicon Labs C8051F06x datasheet, the flash supports programming within the target system. The memory combination is useful for firmware, boot routines, calibration constants, communication buffers, and acquisition records, although final RAM allocation must be checked against the application’s interrupt, stack, and peripheral requirements.
What analog converters are built into the C8051F061-GQ?
The C8051F061-GQ includes two separate 16-bit successive-approximation ADCs. According to the Silicon Labs C8051F06x datasheet, the second converter’s reference is supplied through the VREF2 input, which is shared with ADC2. Separate converters can support independent sampling schedules and measurement channels. Designers should account for the shared VREF2 function when assigning analog pins and should follow the datasheet’s grounding and reference-layout recommendations.
Where can I download the C8051F061-GQ datasheet PDF?
The official C8051F061-GQ datasheet PDF is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/C8051F06x.pdf. It covers the C8051F06x family, including the C8051F061, and contains the authoritative pin descriptions, electrical characteristics, memory map, peripheral details, and package drawings. Engineers should use that document for the complete 64-TQFP pin table and any board-level programming or clock requirements.
Where can I find the C8051F061-GQ 64-TQFP pinout?
The complete 64-TQFP pinout is shown in the pin-description and package-drawing sections of the Silicon Labs C8051F06x datasheet. Use the manufacturer’s pin table when assigning power, ground, analog inputs, CAN, oscillator, programming, and general-purpose I/O functions. The package is 10mm by 10mm, so the physical land pattern must also follow the TQFP dimensions and pin numbering shown in the datasheet rather than a generic QFP footprint.
Where to buy C8051F061-GQ online?
Use the Request a Quote form on this page to ask for C8051F061-GQ availability, quantity breaks, current lead time, and package quantity. The exact MPN is identified as a 64-TQFP, 25 MHz, 64KB-flash member of the C8051F06x family. Requesting the precise C8051F061-GQ suffix helps avoid confusion with the C8051F061-GQR packaging designation or other C8051F06x devices that may have different temperature, flash, or peripheral configurations.
What is the price of the C8051F061-GQ microcontroller?
Request a current quotation for C8051F061-GQ through the Request a Quote form on this page. The quote should specify the 64-TQFP package, production quantity, and target delivery date. Because electronic-component pricing can change with inventory, lifecycle status, and order volume, a current quote provides a more dependable purchasing basis than a historical listing or a starting-from figure. The form also supports requests for small evaluation quantities and scheduled production deliveries.
What is the lead time for C8051F061-GQ?
The current lead time for C8051F061-GQ should be requested through the Request a Quote form on this page. Include the required quantity, target shipment date, and whether the order is for prototype evaluation or scheduled production. The manufacturer offers the device in a 64-TQFP configuration, but confirming exact lead time and lot availability is important for firmware validation, PCB assembly planning, and any line-start schedule.
Is the C8051F061-GQ in stock?
Check current C8051F061-GQ stock status through the Request a Quote form on this page. A distributor search result identifies the exact device as a 64-TQFP, 25 MHz, 64KB-flash microcontroller, but current availability can vary by package suffix and order quantity. Include your required order quantity and delivery target so the supply response can distinguish immediate prototype fulfillment from a scheduled production allocation.
What can replace the C8051F061-GQ?
The closest direct replacements are same-package C8051F06x devices such as the C8051F060-GQ, C8051F062-GQ, C8051F063-GQ, C8051F064-GQ, and C8051F065-GQ. They share the 64-TQFP footprint and 25 MHz CIP-51 platform, but ADC, DAC, memory, and peripheral assignments can differ. Confirm the complete pin-description table and firmware register map before substitution; a matching package alone does not guarantee that every analog or communication function is identical.
Is the C8051F061-GQ the same as the C8051F060-GQ?
The C8051F061-GQ and C8051F060-GQ share the C8051F06x platform, 25 MHz operating class, and 64-TQFP package, but they are not identical devices. The C8051F061-GQ provides two separate 16-bit SAR ADCs, while the C8051F060 belongs to the family configuration with a dedicated VREFD arrangement and a different mixed-signal peripheral mix. Review the datasheet pin table and application requirements before treating the C8051F060-GQ as a functional replacement.
C8051F061-GQ vs C8051F065-GQ: which is better for CAN control?
Choose the C8051F061-GQ when the design specifically requires its two separate 16-bit SAR ADCs and established C8051F061 peripheral configuration. The C8051F065-GQ is a same-family alternative with a shared 64-TQFP footprint, so it may fit a board redesign, but its ADC and peripheral implementation must be checked against the original design. For an unchanged production board, preserving the original device usually minimizes firmware, analog-routing, and validation risk.
When should I choose C8051F061-GQ instead of a generic 8-bit microcontroller?
Choose the C8051F061-GQ when a design needs an 8051-compatible core, 25 MHz operation, 64KB of ISP flash, two independent 16-bit SAR ADCs, and integrated CAN in a 64-TQFP package. It is particularly suitable for industrial controllers and instrumentation where mixed-signal acquisition and network communication are both required. A generic 8-bit MCU may offer lower cost or a smaller package, but it can require a different core, software port, analog architecture, and PCB footprint.
Is C8051F061-GQ suitable for industrial sensor acquisition systems?
The C8051F061-GQ is suitable for industrial sensor acquisition systems that require two separate 16-bit SAR ADCs, a 25 MHz control core, 4.25KB of RAM, and CAN connectivity. According to the Silicon Labs C8051F06x datasheet, its ADC2 reference is tied to the shared VREF2 input, so the analog reference network and layout must be designed carefully. For long cable runs or electrically noisy environments, add appropriate input protection and isolation rather than relying on the microcontroller’s internal protection alone.

Mühendislik referans verileri: C8051F061-GQ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the C8051F061-GQ when the existing design specifically uses its 25 MHz CIP-51 core, 64KB ISP flash, 4.25KB RAM, two separate 16-bit SAR ADCs, and integrated CAN controller. It is particularly suitable for industrial acquisition, instrumentation, sensor nodes, and programmable control equipment. The C8051F060-GQ can be considered for a redesigned board using the family’s dedicated VREFD configuration, but its peripheral assignments must be reconciled with the original firmware and PCB. The C8051F062-GQ, C8051F063-GQ, and C8051F064-GQ share the C8051F06x 64-TQFP platform and may support redesigns, although their ADC, DAC, RAM, and peripheral combinations require direct comparison with the C8051F061 datasheet. The C8051F065-GQ is a same-package family alternative for a controlled redesign, but it should not replace the C8051F061-GQ without schematic, register-map, and firmware verification. For production continuity, exact MPN preservation offers the lowest risk.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün C8051F060-GQ C8051F062-GQ C8051F063-GQ C8051F064-GQ C8051F065-GQ
Manufacturer Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 64-TQFP (10mm x 10mm) 64-TQFP (10mm x 10mm) 64-TQFP (10mm x 10mm) 64-TQFP (10mm x 10mm) 64-TQFP (10mm x 10mm) 64-TQFP (10mm x 10mm)
Core Architecture 8051-compatible CIP-51 core 8051-compatible CIP-51 core 8051-compatible CIP-51 core 8051-compatible CIP-51 core 8051-compatible CIP-51 core 8051-compatible CIP-51 core
Maximum Clock Frequency 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz
Flash Memory 64KB 64KB 64KB 64KB 64KB 64KB
RAM 4.25KB 4.25KB 4.25KB 4.25KB 4.25KB 4.25KB
ADC Resolution 16-bit SAR 16-bit SAR 16-bit SAR 16-bit SAR 16-bit SAR 16-bit SAR
Supply Voltage Range 2.7V to 3.6V 2.7V to 3.6V 2.7V to 3.6V 2.7V to 3.6V 2.7V to 3.6V 2.7V to 3.6V

Ana Farklılayıcılar

  • Two independent 16-bit SAR converters in one controller (karşılaştırma:C8051F060-GQ)
  • Direct CAN integration for embedded systems (karşılaştırma:C8051F065-GQ)
  • Substantial ISP program memory for protocol-rich firmware (karşılaştırma:C8051F062-GQ)
  • Established mixed-signal configuration with shared ADC2 reference support (karşılaştırma:C8051F063-GQ)

Tasarım Notları

Separate analog and digital return paths as shown in the Silicon Labs C8051F06x reference layout. Place the VREF2 bypass network close to the reference pin, connect analog ground to the system ground plane at the converter reference point, and keep high-impedance ADC traces short. Because VREF2 is shared with ADC2, its filtering and grounding directly affect the second converter’s measurement noise.

Place the 3.3V supply bypass capacitors immediately across the appropriate VDD and ground pins rather than at a remote power-entry point. Keep the TQFP land pattern within the manufacturer’s package dimensions and thermal recommendations, and route the oscillator or clock source away from CAN and analog inputs. Review exposed-pad requirements for the specific package revision before releasing the PCB footprint.

Do not assume that any same-package C8051F06x device is firmware-compatible. Compare ADC channels, VREF2 usage, DAC functions, timers, serial interfaces, interrupt vectors, and startup behavior before changing the device in a C8051F061-GQ design. The C8051F061-GQ, C8051F060-GQ, and C8051F065-GQ share the 64-TQFP footprint, but their mixed-signal peripheral assignments are not necessarily identical.

Design the 3.3V rail for the controller and analog converter current without allowing transients from external loads to disturb the reference network. If the MCU drives sensors, relays, or communication transceivers, isolate those loads from sensitive analog branches and use local bulk capacitance where appropriate. Verify brownout and startup behavior across the complete 2.7V to 3.6V operating range.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The device is an industrial mixed-signal microcontroller rather than an automotive-qualified AEC-Q100 product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or the relevant compliance documentation.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

C8051F061-GQ C8051F061-GQ datasheet C8051F061-GQ datasheet pdf C8051F061-GQ pinout C8051F061-GQ 64-TQFP pinout C8051F061-GQ specifications C8051F061-GQ equivalent C8051F061-GQ replacement C8051F061-GQ vs C8051F065-GQ C8051F061-GQ CAN microcontroller C8051F061-GQ application circuit Silicon Labs C8051F061-GQ C8051F061-GQ price C8051F061-GQ stock C8051F061-GQ ADC configuration

İlgili Bileşenler ve Terimler

Silicon Labs C8051F061-GQ C8051F060-GQ C8051F062-GQ C8051F063-GQ C8051F064-GQ C8051F065-GQ C8051F06x 8-bit microcontroller mixed-signal microcontroller CIP-51 core 8051-compatible core in-system programmable flash successive-approximation ADC SAR 16-bit ADC CAN controller 64-TQFP package TQFP package family surface-mount package embedded microcontroller industrial control sensor acquisition data acquisition VREF2
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle