C8051F061-GQ - 25MHz 8-Bit MCU with 64KB Flash | Silicon Labs
MPN: C8051F061-GQ ✓ 啟用中C8051F061-GQ 概覽
An 8-bit microcontroller is a compact programmable controller that executes embedded software and interacts with sensors, actuators, communications networks, and human-machine interfaces. The C8051F061 belongs to the C8051F06x family, combining the C8051 architecture with mixed-signal peripherals. Its 25 MHz clock rate supports faster control-loop execution than conventional legacy 8051 devices while retaining 8051-compatible software compatibility.
The principal features of the C8051F061-GQ include 64KB of ISP flash, 4.25KB of RAM, two independent 16-bit successive-approximation ADCs, a CAN interface, and operation from a 2.7V to 3.6V supply. Two separate converters allow measurements and signal acquisition to be handled independently, which is useful when analog inputs require different sampling schedules, reference conditions, or gain settings.
The device uses Silicon Labs’ CIP-51 core, a pipelined 8051-compatible processor architecture designed for higher execution performance than the original 8051 core. Its in-system programmable flash permits firmware to be programmed or updated while the device is connected to the target system, reducing assembly and service effort. The C8051F061-GQ also provides an external memory interface, timers, serial interfaces, and mixed-signal peripherals suited to industrial control and embedded communication equipment.
Typical applications include industrial controllers, CAN-connected sensor nodes, data-acquisition equipment, motor and actuator controllers, instrumentation, and compact embedded systems that require both digital control and analog measurement. The 64-TQFP package exposes a broad peripheral set and keeps the solution physically manageable for multilayer control boards.
PCB design should preserve clean separation between analog and digital return paths, place decoupling capacitors close to the supply pins, and route high-impedance sensor inputs away from switching nodes and communication traces. Firmware should also initialize unused peripheral pins explicitly because the 64-pin mixed-signal design offers more I/O flexibility than a conventional small-pin-count 8051.
This product page consolidates the manufacturer’s mixed-signal MCU characteristics, verified distributor identification, same-family drop-in options, pin-package considerations, and application-oriented design guidance. It is intended to help engineers select the correct package, evaluate peripheral compatibility, and plan firmware and PCB integration for C8051F061-GQ designs.
直接替換替代品,適用於 C8051F061-GQ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: C8051F061-GQ (相同外形與佔位) — 差異在於 ADC Resolution, Flash Memory, Package, ADC Sampling Rate, In-System Programming.
C8051F060-GQ
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →C8051F062-GQ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
C8051F063-GQ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
C8051F064-GQ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
C8051F065-GQ
✅ 直接替換📋 參考替代品(不在目錄中)
C8051F061-GQ 最大額定值與電氣特性
| Microcontroller Type | 8-bit mixed-signal microcontroller |
| Core Architecture | 8051-compatible CIP-51 core |
| 最大時脈頻率 | 25 MHz |
| Flash Memory | 64KB (64K x 8) |
| Program Memory Type | In-system programmable flash |
| RAM | 4.25KB (4352 bytes: 4096 + 256 bytes) |
| ADC Resolution | 16-bit SAR |
| ADC Configuration | Two separate 16-bit SAR ADCs |
| Connectivity | CAN controller |
| Supply Voltage Range | 2.7V to 3.6V |
| 封裝 | 64-TQFP (10mm x 10mm) |
| 腳位數 | 64 pins |
| 安裝類型 | Surface mount |
| Series | C8051F06x |
| Execution Model | High-speed pipelined architecture |
| ADC2 Reference | VREF2 input shared with ADC2 |
| RoHS 狀態 | Unknown |
| REACH Status | Unknown |
| AEC-Q100 Qualification | Not applicable |
C8051F061-GQ 64-tqfp (10mm x 10mm) 腳位配置指南
C8051F061-GQ(64-tqfp (10mm x 10mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: C8051F061-GQ.
請參閱 資料表 以查看完整腳位配置。
典型應用
C8051F061-GQ 適用於 6 應用s: CAN-Connected Industrial Sensor Nodes, Industrial Data-Acquisition Equipment, Motor and Actuator Control, Industrial Instrumentation and Signal Conditioning, CAN-Based Environmental Monitoring, Embedded Programmable Control Equipment.
CAN-Connected Industrial Sensor Nodes
The C8051F061-GQ fits CAN-connected sensor nodes because it combines an integrated CAN controller with two separate 16-bit SAR ADCs in one 64-TQFP device. A sensor interface can use the converters for process measurements while the 25 MHz CIP-51 core handles conditioning, filtering, local decisions, and CAN message formatting. Its 64KB ISP flash provides substantial room for protocol drivers and application firmware, while 4.25KB of RAM supports buffers and stack space. The 2.7V to 3.6V operating range also simplifies integration with 3.3V industrial electronics.
推薦
Industrial Data-Acquisition Equipment
The C8051F061-GQ is appropriate for compact multi-channel data-acquisition equipment where two independent 16-bit SAR ADCs improve measurement organization. Separate converters can sample different analog inputs under different timing or reference conditions, while the 25 MHz core performs scaling, filtering, calibration, and host transfers. The 64KB in-system programmable flash supports acquisition routines and communication protocols, and 4.25KB of RAM can hold sample buffers. Board designers should follow the datasheet guidance for VREF2, analog grounding, and high-impedance input routing.
推薦
Motor and Actuator Control
The C8051F061-GQ can serve as the control core in motor and actuator systems requiring deterministic embedded timing, mixed-signal feedback, and network communication. Its 25 MHz CIP-51 core can execute position or process-control algorithms, while the two 16-bit SAR ADCs monitor current, position, temperature, or analog command signals. CAN connectivity permits coordinated operation with other machine controllers. The 64-TQFP package exposes the required control and communication signals, but motor traces must be separated from analog inputs and protected against switching transients.
推薦
Industrial Instrumentation and Signal Conditioning
The C8051F061-GQ is well suited to instrumentation that measures low-level analog signals and performs local signal conditioning. Two 16-bit SAR ADCs can acquire inputs with different sampling requirements, and the 25 MHz processor can apply offsets, gains, filtering, compensation, and unit conversion. Its 64KB flash accommodates calibration tables and embedded user interface logic, while CAN can expose processed measurements to a supervisory system. The 3.3V supply range simplifies integration, although analog reference and bypass layout remain critical to measurement repeatability.
推薦
CAN-Based Environmental Monitoring
The C8051F061-GQ can support environmental monitoring stations that combine analog sensors with centralized CAN communication. Temperature, humidity, pressure, or gas sensors can be sampled through the two 16-bit SAR ADCs, while the 25 MHz core performs local filtering, thresholding, compensation, and event logging. Its 64KB ISP flash supports protocol handling and firmware updates, and 4.25KB of RAM is suitable for short measurement histories and communication frames. Because sensors may be connected by long cables, add external protection and consider galvanic isolation at the system level.
推薦
Embedded Programmable Control Equipment
The C8051F061-GQ suits embedded programmable controllers that must combine logic execution, analog supervision, and field-bus communication. Its 25 MHz 8051-compatible core simplifies migration from established C8051 software, while 64KB of ISP flash allows controlled firmware updates in the finished assembly. Two 16-bit SAR ADCs can monitor supply rails, process values, or operator controls, and CAN provides a deterministic communications path. Firmware should configure unused pins explicitly and include watchdog, brownout, and communications-error handling appropriate to the final equipment.
推薦
推薦產品摘要
工程參考資料,適用於 C8051F061-GQ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | C8051F060-GQ | C8051F062-GQ | C8051F063-GQ | C8051F064-GQ | C8051F065-GQ |
|---|---|---|---|---|---|---|
| Manufacturer | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-TQFP (10mm x 10mm) | 64-TQFP (10mm x 10mm) | 64-TQFP (10mm x 10mm) | 64-TQFP (10mm x 10mm) | 64-TQFP (10mm x 10mm) | 64-TQFP (10mm x 10mm) |
| Core Architecture | 8051-compatible CIP-51 core | 8051-compatible CIP-51 core | 8051-compatible CIP-51 core | 8051-compatible CIP-51 core | 8051-compatible CIP-51 core | 8051-compatible CIP-51 core |
| Maximum Clock Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Flash Memory | 64KB | 64KB | 64KB | 64KB | 64KB | 64KB |
| RAM | 4.25KB | 4.25KB | 4.25KB | 4.25KB | 4.25KB | 4.25KB |
| ADC Resolution | 16-bit SAR | 16-bit SAR | 16-bit SAR | 16-bit SAR | 16-bit SAR | 16-bit SAR |
| Supply Voltage Range | 2.7V to 3.6V | 2.7V to 3.6V | 2.7V to 3.6V | 2.7V to 3.6V | 2.7V to 3.6V | 2.7V to 3.6V |
主要差異化特點
- Two independent 16-bit SAR converters in one controller (對比C8051F060-GQ)
- Direct CAN integration for embedded systems (對比C8051F065-GQ)
- Substantial ISP program memory for protocol-rich firmware (對比C8051F062-GQ)
- Established mixed-signal configuration with shared ADC2 reference support (對比C8051F063-GQ)
設計說明
Separate analog and digital return paths as shown in the Silicon Labs C8051F06x reference layout. Place the VREF2 bypass network close to the reference pin, connect analog ground to the system ground plane at the converter reference point, and keep high-impedance ADC traces short. Because VREF2 is shared with ADC2, its filtering and grounding directly affect the second converter’s measurement noise.
Place the 3.3V supply bypass capacitors immediately across the appropriate VDD and ground pins rather than at a remote power-entry point. Keep the TQFP land pattern within the manufacturer’s package dimensions and thermal recommendations, and route the oscillator or clock source away from CAN and analog inputs. Review exposed-pad requirements for the specific package revision before releasing the PCB footprint.
Do not assume that any same-package C8051F06x device is firmware-compatible. Compare ADC channels, VREF2 usage, DAC functions, timers, serial interfaces, interrupt vectors, and startup behavior before changing the device in a C8051F061-GQ design. The C8051F061-GQ, C8051F060-GQ, and C8051F065-GQ share the 64-TQFP footprint, but their mixed-signal peripheral assignments are not necessarily identical.
Design the 3.3V rail for the controller and analog converter current without allowing transients from external loads to disturb the reference network. If the MCU drives sensors, relays, or communication transceivers, isolate those loads from sensitive analog branches and use local bulk capacitance where appropriate. Verify brownout and startup behavior across the complete 2.7V to 3.6V operating range.
合規資訊
The device is an industrial mixed-signal microcontroller rather than an automotive-qualified AEC-Q100 product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or the relevant compliance documentation.