C8051F386-GQ - 50 MHz USB Flash MCU | Silicon Labs
MPN: C8051F386-GQ ✓ AktifC8051F386-GQ Genel Bakış
A flash-based 8051 microcontroller is an embedded processing IC that combines a CPU, program memory, data memory, peripherals, and communication interfaces on one device. The C8051F38x family belongs to the mixed-signal MCU hierarchy: microcontroller unit, embedded controller, 8-bit processor, and semiconductor. Silicon Labs positions this family for applications requiring USB connectivity, UART communication, precision timing, and low-power operation without an external clock-recovery circuit.
Core features include an internal oscillator with ±0.25% accuracy for USB and UART operation, a low-frequency oscillator for low-power modes, and integrated clock recovery. The device combines 32 KB of flash program storage with 2.25 KB of RAM and executes at up to 48 MIPS. Its integrated USB capability reduces the external circuitry required for a USB-connected control product, while the 48-TQFP package provides a conventional surface-mount option for compact boards.
The C8051F38x architecture supports both USB and UART operating modes from the internal oscillator, according to the Silicon Labs C8051F38x family datasheet. That combination is useful when a design needs both a full-speed peripheral connection and a debug or communications UART. Because oscillator accuracy directly affects USB timing and UART baud-rate stability, the ±0.25% internal oscillator specification is a central selection criterion for these communication-oriented designs.
Typical uses include USB-connected data acquisition modules, industrial serial controllers, instrumentation, human-interface equipment, and low-power peripheral controllers. The 2.7 V to 5.25 V operating range allows the MCU to share common supply rails found in embedded systems, while 32 KB of flash provides room for protocol handling, device control, and application firmware. Designers should confirm peripheral availability and package-level pin requirements against the selected device variant before finalizing a PCB.
Layout should preserve short, controlled paths around USB and oscillator-related pins, follow the manufacturer’s decoupling recommendations, and route sensitive analog or communications signals away from switching nodes. Firmware selection also matters: the USB-enabled C8051F38x family uses Silicon Labs development tools and application programming interfaces, so confirm toolchain and driver support before committing the MCU to a new design.
This page consolidates the exact electrical, memory, package, pricing, and sourcing facts for C8051F386-GQ, then adds practical application guidance, design notes, and package-compatible family comparisons for faster engineering evaluation.
Drop-in alternatifler için C8051F386-GQ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller C8051F386-GQ (aynı form faktörü ve ayağa oturma) — farklı olan Package, Flash Memory, RAM, Pin Count, Microcontroller Type.
C8051F384-GQ
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →C8051F380-GQ
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →C8051F385-GQ
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →C8051F387-GQ
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →C8051F388-GQ
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
C8051F386-GQ Maksimum Değerlendirmeler & Elektriksel Özellikler
| Manufacturer | Silicon Labs |
| Product Series | C8051F38x |
| Processor Architecture | 8-bit 8051 |
| Azami Saat Hızı | 50 MHz |
| Maximum Performance | 48 MIPS |
| Flash Memory | 32 KB (32K x 8) |
| RAM | 2.25 KB (2.25K x 8) |
| Supply Voltage Range | 2.7 V to 5.25 V |
| USB Interface | Full-speed USB |
| Serial Interface | UART |
| Internal Oscillator Accuracy | ±0.25% |
| Clock Recovery | Integrated |
| Low-Frequency Oscillator | Supported |
| Paket | 48-TQFP (7 x 7 mm) |
| Montaj Türü | Surface Mount |
| RoHS Durumu | Compliant |
| Programming Memory Type | Flash |
C8051F386-GQ 48-tqfp (7 x 7 mm) Pin Yapısı Kılavuzu
C8051F386-GQ (48-tqfp (7 x 7 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: C8051F386-GQ.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
C8051F386-GQ için uygundur 6 uygulamas: USB Data Acquisition Module, USB Human-Interface Controller, Industrial Serial Controller, Instrumentation and Measurement Controller, Low-Power Peripheral Controller, Portable Connected Sensor Node.
USB Data Acquisition Module
The C8051F386-GQ fits a USB data-acquisition module because it combines a 50 MHz clock rating, full-speed USB connectivity, 32 KB of flash, and 2.25 KB of RAM in one 48-TQFP device. The USB peripheral can carry measurement data to a host while the UART provides a configuration or diagnostic channel. Its internal oscillator is specified to ±0.25% accuracy for USB and UART modes, reducing the need for external timing components. Place the USB lines and supporting passive network close to the MCU, and validate the complete transceiver, impedance, and firmware stack before production.
Önerilen
USB Human-Interface Controller
A keyboard, control surface, or configuration interface can use the C8051F386-GQ to handle USB traffic and local I/O without a separate USB controller. The 8-bit C8051F38x architecture operates at up to 48 MIPS, while 32 KB of flash leaves room for USB firmware, device-state management, and communication protocols. The integrated clock-recovery capability and ±0.25% internal oscillator support stable USB operation. Firmware should include enumeration handling, endpoint configuration, debounce logic, and suspend behavior, while PCB routing preserves controlled USB impedance and short return paths.
Önerilen
Industrial Serial Controller
The C8051F386-GQ is suitable for an industrial serial controller that needs USB for configuration, service access, or data transfer while retaining UART communication with external equipment. Its 2.7 V to 5.25 V operating range supports common embedded supply rails, and the 48-TQFP package supports conventional PCB assembly. At 50 MHz, the MCU can service multiple communication tasks, although protocol timing and interrupt latency must be verified for the selected clock configuration. Use isolated interfaces where required by the application and follow the manufacturer’s decoupling and layout guidance.
Önerilen
Instrumentation and Measurement Controller
The C8051F386-GQ can act as the control and communications core of a compact instrumentation product. Its 32 KB flash accommodates measurement sequencing, calibration data, and communication routines, while 2.25 KB of RAM supports working buffers. The 50 MHz rating provides useful performance margin for event handling and mixed-signal control tasks. For precision measurement chains, use dedicated analog converters or amplifiers and treat MCU oscillator accuracy separately from analog measurement accuracy. Validate clock, acquisition, calibration, and USB update workflows as one system to avoid firmware timing surprises.
Önerilen
Low-Power Peripheral Controller
The C8051F386-GQ can support a low-power peripheral controller that periodically communicates through USB or UART and then enters a low-frequency operating mode. The family includes a low-frequency oscillator for low-power operation, while its 32 KB of flash can hold compact control and update firmware. Power consumption depends on the selected clock mode, active peripherals, firmware behavior, and external load, so measure the complete product rather than inferring runtime from the maximum 50 MHz rating. Retain a reliable recovery path for USB enumeration after a low-power or reset event.
Önerilen
Portable Connected Sensor Node
A portable sensor node can use the C8051F386-GQ when local processing, USB connectivity, and a modest memory footprint are more important than a low-power radio integration. The MCU provides 32 KB of flash for drivers and application logic, 2.25 KB of RAM for acquisition buffers, and both USB and UART interfaces for configuration. Because this device does not include a radio, the USB link can connect to a host or gateway that provides wireless service. Use the UART for sensor and radio-module control, and isolate sensitive analog channels from USB and digital switching activity.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: C8051F386-GQ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | C8051F384-GQ | C8051F380-GQ | C8051F385-GQ | C8051F387-GQ | C8051F388-GQ |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) |
| Processor Architecture | 8-bit 8051 | C8051F38x family 8-bit MCU | C8051F38x family 8-bit MCU | C8051F38x family 8-bit MCU | C8051F38x family 8-bit MCU | C8051F38x family 8-bit MCU |
Ana Farklılayıcılar
- USB connectivity is integrated into the same mixed-signal MCU platform (karşılaştırma:C8051F380-GQ)
- Integrated clock recovery supports communication timing (karşılaştırma:C8051F384-GQ)
- Substantial on-chip memory for communication firmware (karşılaştırma:C8051F385-GQ)
- Wide low-voltage operating range (karşılaştırma:C8051F387-GQ)
Tasarım Notları
Follow the manufacturer’s recommended power-pin and decoupling layout for the 48-TQFP device. Place the required input and output capacitors close to their associated pins, minimize loop area, and provide a low-impedance return path. USB and clock-related nets should have controlled geometry and be kept away from noisy switching nodes. Because the C8051F38x integrates USB and clock recovery, the PCB must preserve the signal conditions specified by the family datasheet rather than relying on generic layout conventions.
Design the 2.7 V to 5.25 V supply for both average demand and startup transients. Confirm the voltage at the MCU pins under minimum and maximum operating conditions, especially while USB connects, resets, or changes operating modes. Do not treat the 50 MHz maximum clock as an automatic power setting; actual dissipation depends on the selected clock source, active peripherals, duty cycle, and firmware activity. Verify brownout and reset behavior across the complete power system.
Do not select a family alternative using package similarity alone. Check every assigned pin, power pin, ground connection, USB function, UART function, timer, analog block, interrupt source, and clock requirement in the manufacturer documentation. The GQ package suffix identifies the target configuration, so also confirm temperature, qualification, and shipping options. If a substitution changes peripheral availability, firmware and board validation are required even when the land pattern remains unchanged.
Keep USB traces short, continuous, and referenced to a continuous ground plane while avoiding stubs and unnecessary layer changes. Maintain spacing from switching-regulator nodes and high-current return paths. For UART-connected external equipment, route the interface away from analog acquisition networks to reduce noise coupling. Review external crystal or oscillator requirements only if the selected clock configuration uses a source other than the internal oscillator; the family documentation supports internal timing for USB and UART modes.
Uyumluluk Bilgisi
The LCSC listing identifies the exact device as RoHS compliant. Other compliance attributes and automotive qualification are not stated and therefore remain unknown.