Silicon Labs

C8051F387-GM - 50 MHz 8051 MCU, 32 KB Flash | Silicon Labs

MPN: C8051F387-GM ✓ Aktif
2.7 V to 5.25 V Vdss 32-QFN (5 x 5 mm) Package 50 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

C8051F387-GM Genel Bakış

The Silicon Labs C8051F387-GM is an automotive-grade 8-bit 8051 microcontroller with 50 MHz performance, 32 KB of Flash memory, 2.25 KB of RAM, and AEC-Q100 qualification in a 32-QFN 5 x 5 mm package. It operates from 2.7 V to 5.25 V and is intended for integrated automotive and industrial control systems.

An 8051 microcontroller is a compact embedded-processing device built around the 8051 instruction-set architecture, with flash program memory, RAM, timers, serial interfaces, and analog or digital I/O integrated onto one chip. The C8051F38x family extends the basic 8051 core with higher clock performance and mixed-signal peripherals, allowing a single device to control sensors, communication links, and actuators without a separate analog companion chip.

The C8051F387-GM combines a 50 MHz core, 32 KB flash, and 2.25 KB RAM with integrated communication interfaces and an ADC. Its enhanced operating range extends to 85 °C, making it suitable for temperature-constrained automotive and industrial environments. The AEC-Q100 qualification is a significant selection factor for designs that require automotive-grade production testing.

Its 2.7 V to 5.25 V supply range supports both 3.3 V and 5 V system rails. The device is listed with a maximum performance rating of 48 MIPS in distributor technical tables and with a 50 MHz clock in the manufacturer product description, reflecting the relationship between clock rate and the architecture's instruction throughput.

Typical applications include automotive body and comfort modules, industrial sensing and control equipment, motor-control subsystems, and communication-enabled embedded products. The compact 32-QFN package reduces board area, while the flash and RAM resources support protocol handlers, control loops, and local data buffering.

When laying out the PCB, follow the manufacturer's pin-description table and exposed-pad thermal recommendations exactly. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from high-current switching paths, and verify the package dimensions and exposed-pad connection against the land pattern in the manufacturer documentation.

This page combines manufacturer specifications, same-family replacement guidance, package and thermal considerations, and practical design notes to help engineers evaluate the C8051F387-GM beyond a basic distributor parameter listing.

Drop-in alternatifler için C8051F387-GM — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller C8051F387-GM (aynı form faktörü ve ayağa oturma) — farklı olan Communication Interfaces, Flash Memory, Package, Product Type, RAM.

Silicon Labs
Communication Interfaces: Integrated communication interfaces
Flash Memory: 64 kB
Package: 32-QFN, 5 x 5 mm
İle Karşılaştır C8051F387-GM →

C8051F381-GM

✅ Yerleştirme
Silicon Labs
📦 32-QFN (5 x 5 mm)
8-bit Flash Microcontroller (MCU) · 8051 CISC core · 50 MHz · 48 MIPS · 64 kB · 4.25 kB · 2.7 V to 5.25 V · 10 bit

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

C8051F385-GM

✅ Yerleştirme
📦 32-QFN (5 x 5 mm)
Same C8051F38x QFN-32 package family; Flash, RAM, and peripheral differences can require firmware and pin-function verification

📋 Katalogda Olmayan Referans Alternatifi

C8051F387-GMR

✅ Yerleştirme
📦 32-QFN (5 x 5 mm)
Functionally the same C8051F387 device with the same 32-QFN package and electrical configuration; only the tape-and-reel ordering suffix differs

📋 Katalogda Olmayan Referans Alternatifi

C8051F387-GM Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 8-bit 8051 microcontroller
Manufacturer Silicon Labs
Series C8051F38x
Azami Saat Hızı 50 MHz
Maximum Performance 48 MIPS
Flash Memory 32 KB (32K x 8)
RAM 2.25 KB (2.25K x 8)
Supply Voltage Range 2.7 V to 5.25 V
Paket 32-QFN (5 x 5 mm)
Montaj Türü Surface mount
Automotive Qualification AEC-Q100 qualified
Maximum Operating Temperature 85 °C
ADC Integrated
Communication Interfaces Integrated
Core Architecture 8051
Program Memory Type Flash

C8051F387-GM 32-qfn (5 x 5 mm) Pin Yapısı Kılavuzu

C8051F387-GM (32-qfn (5 x 5 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

32-qfn (5 x 5 mm) paket pin çizelgesi için C8051F387-GM

Ayrıntılı pin çıkış verisi mevcut değil: C8051F387-GM.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

C8051F387-GM için uygundur 6 uygulamas: Automotive Body Control Module, Industrial Sensor Aggregation, Compact Motor Control Subsystem, Communication-Enabled Embedded Control, Automotive Diagnostics Gateway, Temperature-Conditioned Control Module.

🚗

Automotive Body Control Module

The C8051F387-GM suits compact automotive body-control tasks where an AEC-Q100-qualified 8051 MCU must manage inputs, timers, communications, and actuator commands in a small board area. Its 50 MHz core provides processing headroom for protocol handling and control logic, while 32 KB of Flash and 2.25 KB of RAM support embedded firmware, configuration data, and short diagnostic buffers. The 32-QFN 5 x 5 mm package also leaves more board space for power, communications, and protection components. Confirm peripheral assignments, exposed-pad layout, and automotive qualification requirements against the manufacturer documentation before production release.

🏭

Industrial Sensor Aggregation

The C8051F387-GM is appropriate for industrial sensor-hub designs that collect analog measurements, apply filtering, and forward processed data over a serial interface. Its integrated ADC reduces the need for a separate converter, while the 50 MHz core can manage multiple sampling and control tasks. The 2.25 KB RAM provides working space for calibration values and short sample buffers, and 32 KB of Flash is sufficient for control routines and interface stacks. The 2.7 V to 5.25 V operating range supports common industrial rails. Validate channel counts, conversion performance, and communication resources against the device datasheet.

🔧

Compact Motor Control Subsystem

The C8051F387-GM can serve as the control processor in a compact motor-control subsystem where fast deterministic execution, mixed-signal sensing, and limited board area are important. The 50 MHz core provides scheduling headroom for closed-loop control, fault handling, and communication updates. Its integrated ADC supports analog feedback acquisition, while the Flash and RAM resources hold control tables, state variables, and diagnostic data. Automotive qualification and operation to 85 °C make the device relevant to vehicle or industrial actuator subsystems. Confirm timer, PWM, capture, and fault-response resources in the manufacturer peripheral reference before assigning the part.

🌐

Communication-Enabled Embedded Control

The C8051F387-GM works well in compact embedded controllers that must combine local decision logic with an external communications link. Its integrated communication interfaces can reduce the component count when the required protocol is available in the selected device configuration, while the 50 MHz core leaves processing headroom for framing, buffering, and supervisory tasks. The 2.25 KB RAM is suitable for short protocol buffers, and 32 KB of Flash supports application firmware and configuration. Use the manufacturer documentation to identify the exact serial interfaces, supported baud rates, and peripheral multiplexing options for the required system architecture.

🖥️

Automotive Diagnostics Gateway

A diagnostics gateway can use the C8051F387-GM to translate messages between vehicle networks while maintaining local fault logging. The 50 MHz 8051 core supports protocol processing and deterministic scheduling, while 2.25 KB of RAM accommodates transient message and status data. Its AEC-Q100 qualification is relevant for automotive deployment, and the 32-QFN package keeps the implementation compact enough for a central electronics module or gateway board. Exact network-interface availability, protocol support, and timing characteristics must be confirmed in the device data sheet rather than inferred from the family name.

🌡️

Temperature-Conditioned Control Module

The C8051F387-GM is a practical choice for temperature-conditioned industrial or vehicle electronics that require operation to 85 °C and automotive-grade production controls. Its integrated ADC can monitor system or process signals, while the 50 MHz core performs regulation, sequencing, and fault management. Operating from 2.7 V to 5.25 V allows deployment from 3.3 V or 5 V rails, and the compact 32-QFN footprint assists with space-constrained enclosures. Designers should verify the complete thermal profile, exposed-pad power distribution, and temperature-dependent limits in the manufacturer documentation.

Önerilen Ürünler Özeti

C8051F387-GM Silicon Labs Kullanıldığı Yer: Automotive Body Control Module, Industrial Sensor Aggregation, Compact Motor Control Subsystem, Communication-Enabled Embedded Control, Automotive Diagnostics Gateway, Temperature-Conditioned Control Module C8051F385-GM Related C8051F38x automotive MCU family Kullanıldığı Yer: Automotive Body Control Module, Compact Motor Control Subsystem, Temperature-Conditioned Control Module C8051F381-GM Silicon Labs Kullanıldığı Yer: Industrial Sensor Aggregation, Communication-Enabled Embedded Control C8051F387-GMR Same-device reel-packaging ordering option Kullanıldığı Yer: Automotive Diagnostics Gateway
What are the key specifications of C8051F387-GM that engineers should know?
The C8051F387-GM combines a 50 MHz 8051 core, 32 KB of Flash, 2.25 KB of RAM, and an integrated ADC in a 32-QFN 5 x 5 mm package. According to the Silicon Labs product description, the device is AEC-Q100 qualified for automotive and industrial use, supports enhanced operation to 85 °C, and operates from 2.7 V to 5.25 V. Its listed performance is 48 MIPS, and the family integrates communication interfaces alongside the control peripherals.
What is the operating voltage of C8051F387-GM?
The C8051F387-GM operates from 2.7 V to 5.25 V according to the published device specifications. This range allows the microcontroller to work with 3.3 V and 5 V system rails. The design should include local supply decoupling and should verify analog and digital operating limits against the manufacturer datasheet before fixing the power architecture.
Where can I download the C8051F387-GM datasheet PDF?
The official C8051F387-GM documentation is available through the Silicon Labs product page listed on this page. Use the manufacturer data-sheet and user-manual links there to obtain the pin description, electrical characteristics, memory map, and peripheral reference information. The product page also identifies the MCU as part of the C8051F38x series and confirms its 50 MHz, 32 KB Flash configuration.
Where can I find the C8051F387-GM pinout and package drawing?
The C8051F387-GM uses a 32-QFN 5 x 5 mm package, and its authoritative pin assignments appear in the manufacturer datasheet pin-description table and package drawing. Use that table when assigning PCB nets, including power, ground, analog inputs, oscillator connections, programming signals, and communications. The exposed-pad connection and land-pattern dimensions should also be taken directly from the manufacturer documentation.
Is C8051F387-GM suitable for automotive applications?
Yes, the C8051F387-GM is auto-grade qualified and tested to AEC-Q100 specification, with enhanced temperature operation up to 85 °C. Silicon Labs describes it as a highly integrated automotive and industrial MCU. Its 50 MHz core, 32 KB Flash, 2.25 KB RAM, ADC, and integrated communication interfaces make it appropriate for compact vehicle control modules and similarly constrained industrial equipment.
What can replace the C8051F387-GM on the same PCB footprint?
The closest same-family candidates identified for the C8051F38x series are C8051F381-GM and C8051F385-GM, both associated with the same QFN-32 package family. However, the C8051F387-GM specifically provides 32 KB of Flash and 2.25 KB of RAM, so memory size, peripheral configuration, and firmware requirements must be checked before substitution. Confirm pin compatibility and function-level equivalence in the manufacturer documentation.
Is the C8051F387-GM the same as the C8051F387-GMR?
No, the C8051F387-GM and C8051F387-GMR are ordering variants of the same device rather than different functions. The GMR variant is supplied in a tape-and-reel format, while the GM variant uses the manufacturer's standard ordering designation. For PCB population, the reel-code variant remains a packaging choice rather than a functional upgrade, so confirm the required delivery format before substitution.
Can the EFM8UB20 series replace a C8051F387-GM?
An EFM8UB20 device should not be treated as a confirmed drop-in replacement without a detailed pin, clock, memory, peripheral, and firmware review. Even when both devices use a QFN-32 package and a similar clock rate, the Silicon Labs EFM8 family uses a different device generation and peripheral arrangement. Community comparisons are useful for discovery, but only a manufacturer comparison and board-level validation can establish replacement suitability.
When should I choose the C8051F387-GM over another 8051-compatible MCU?
Choose the C8051F387-GM when the design needs a 50 MHz 8051-class core, 32 KB of Flash, 2.25 KB of RAM, integrated ADC and communications, and AEC-Q100 automotive qualification in a compact 32-QFN package. It is especially suitable for 3.3 V or 5 V automotive and industrial control subsystems. Select a different MCU when the existing board requires another memory configuration, a different peripheral map, or established legacy software support.
Is C8051F387-GM suitable for industrial motor and sensor control?
Yes, the C8051F387-GM fits compact industrial sensor and motor-control systems that benefit from a 50 MHz core and integrated mixed-signal resources. The device provides 32 KB of Flash for control code, 2.25 KB of RAM for working data, an integrated ADC, and communication interfaces for sensor aggregation or supervisory control. Use the manufacturer peripheral reference to confirm timer, PWM, and analog-channel requirements.
How much power does the C8051F387-GM need?
The C8051F387-GM operates from a 2.7 V to 5.25 V supply, but exact active and sleep current depend on clock settings, enabled peripherals, and the operating temperature. Use the manufacturer electrical-characteristics table for design-current budgets and regulator sizing. Apply power-budget estimates to the final peripheral configuration rather than assuming a single current value applies across all modes.
What is the operating temperature of C8051F387-GM?
The C8051F387-GM supports enhanced temperature operation up to 85 °C and is qualified to AEC-Q100 automotive specifications according to Silicon Labs. The exact minimum operating temperature and any grade-specific limits should be taken from the ordering information and electrical-characteristics table. Keep this temperature ceiling in mind when designing enclosure-level thermal margins.
Where can I buy C8051F387-GM online?
Use the Request a Quote form on this page to request C8051F387-GM availability, current pricing, and lead time for the required quantity and packaging format. The form is the appropriate route for a transactional quote and can help confirm whether the exact GM ordering designation is available for production scheduling. For technical confirmation, use the linked Silicon Labs product page and datasheet.
What is the price of C8051F387-GM?
Current C8051F387-GM pricing is handled through the Request a Quote form on this page. Submit the required quantity, target delivery date, and packaging preference to obtain an up-to-date quotation and availability confirmation. Structured pricing information on the page is updated as channel data changes, while the quote form provides the direct transactional response for this exact ordering code.
What is the lead time for C8051F387-GM?
Request the current C8051F387-GM lead time through the Request a Quote form on this page. Include your annual and forecast demand, required package delivery format, and target production date so availability can be evaluated against your schedule. For long-running automotive or industrial programs, request lifecycle and supply-continuity information as part of the same sourcing review.

Mühendislik referans verileri: C8051F387-GM — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the C8051F387-GM for compact automotive or industrial control designs that specifically require a 50 MHz 8051 core, 32 KB of Flash, 2.25 KB of RAM, an integrated ADC, AEC-Q100 qualification, and operation to 85 °C in a 32-QFN package. Review C8051F385-GM when its memory and peripheral mix fit the design more closely, but verify every pin and software resource rather than relying on the shared package. C8051F381-GM is another same-family QFN-32 candidate, although its qualification and memory configuration must be confirmed separately. Use C8051F387-GMR when the same electrical device is needed in the manufacturer tape-and-reel ordering format. For a migration to a non-8051 MCU family, treat the change as a board and firmware redesign rather than a drop-in replacement.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün C8051F381-GM C8051F385-GM C8051F387-GMR
Package 32-QFN (5 x 5 mm) 32-QFN (5 x 5 mm) 32-QFN (5 x 5 mm) 32-QFN (5 x 5 mm)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Core Architecture 8051 8051 8051 8051

Ana Farklılayıcılar

  • Automotive-grade qualification with an 85 °C operating rating (karşılaştırma:C8051F381-GM)
  • Defined 32 KB Flash and 2.25 KB RAM configuration (karşılaştırma:C8051F385-GM)
  • Same core speed and electrical configuration with an alternate order code (karşılaştırma:C8051F387-GMR)

Tasarım Notları

Use the manufacturer package drawing and land pattern for the 32-QFN 5 x 5 mm device, paying particular attention to the exposed thermal pad. Place supply and ground decoupling capacitors close to their corresponding pins, and connect the exposed pad to the ground plane with short, low-impedance vias. Confirm pin numbering against the pin-description table before routing the oscillator, programming interface, analog inputs, and communications.

The operating-temperature rating reaches 85 °C, so thermal design must account for both internal dissipation and enclosure temperature. The QFN exposed pad is the principal heat-transfer path and depends on adequate copper area and via density. Estimate junction rise from calculated device power, ambient temperature, and the manufacturer's thermal-characteristics data. Use an estimated calculation rather than a catalog limit when deciding whether additional copper or airflow is required.

Keep analog inputs and their reference routing away from switching nodes, high-current outputs, and crystal-clock traces. Use a continuous ground reference beneath signal paths, keep the oscillator loop compact, and follow the recommended decoupling topology in the manufacturer application information. Because the MCU integrates an ADC, stable reference and power-supply routing directly affect measurement repeatability and should be verified with board-level testing.

Do not treat a QFN-32 package match as proof of software or functional interchangeability. Before replacing the C8051F387-GM with C8051F381-GM or C8051F385-GM, compare memory capacity, port multiplexing, interrupt assignments, analog channels, timers, communication peripherals, clock requirements, and package pins. Validate the new firmware and production programming procedure on the candidate device before releasing the PCB for volume assembly.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Silicon Labs describes the C8051F387-GM as auto-grade qualified and tested to AEC-Q100 specification with enhanced temperature operation up to 85 °C. RoHS, REACH, halogen-free, and conflict-minerals statuses were not identified in the manufacturer listing text.

İlgili Aramalar

C8051F387-GM datasheet C8051F387-GM pinout C8051F387-GM datasheet pdf C8051F387-GM equivalent C8051F387-GM replacement C8051F387-GM drop-in replacement C8051F387-GM cross reference C8051F387-GM 32-QFN C8051F387-GM 50 MHz C8051F387-GM 32KB Flash Silicon Labs C8051F387-GM C8051F387-GM automotive MCU C8051F387-GM vs C8051F381-GM C8051F387-GM price C8051F387-GM stock

İlgili Bileşenler ve Terimler

Silicon Labs C8051F387-GM C8051F381-GM C8051F385-GM C8051F387-GMR C8051F38x 8051 microcontroller 8-bit microcontroller embedded microcontroller flash program memory 32 KB Flash 2.25 KB RAM 50 MHz clock 48 MIPS ADC AEC-Q100 automotive-grade semiconductor industrial microcontroller 32-QFN QFN package family surface-mount package 2.7 V to 5.25 V 85 °C mixed-signal control
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle