C8051F387-GM - 50 MHz 8051 MCU, 32 KB Flash | Silicon Labs
부품 번호: C8051F387-GM ✓ 활성C8051F387-GM 개요
An 8051 microcontroller is a compact embedded-processing device built around the 8051 instruction-set architecture, with flash program memory, RAM, timers, serial interfaces, and analog or digital I/O integrated onto one chip. The C8051F38x family extends the basic 8051 core with higher clock performance and mixed-signal peripherals, allowing a single device to control sensors, communication links, and actuators without a separate analog companion chip.
The C8051F387-GM combines a 50 MHz core, 32 KB flash, and 2.25 KB RAM with integrated communication interfaces and an ADC. Its enhanced operating range extends to 85 °C, making it suitable for temperature-constrained automotive and industrial environments. The AEC-Q100 qualification is a significant selection factor for designs that require automotive-grade production testing.
Its 2.7 V to 5.25 V supply range supports both 3.3 V and 5 V system rails. The device is listed with a maximum performance rating of 48 MIPS in distributor technical tables and with a 50 MHz clock in the manufacturer product description, reflecting the relationship between clock rate and the architecture's instruction throughput.
Typical applications include automotive body and comfort modules, industrial sensing and control equipment, motor-control subsystems, and communication-enabled embedded products. The compact 32-QFN package reduces board area, while the flash and RAM resources support protocol handlers, control loops, and local data buffering.
When laying out the PCB, follow the manufacturer's pin-description table and exposed-pad thermal recommendations exactly. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from high-current switching paths, and verify the package dimensions and exposed-pad connection against the land pattern in the manufacturer documentation.
This page combines manufacturer specifications, same-family replacement guidance, package and thermal considerations, and practical design notes to help engineers evaluate the C8051F387-GM beyond a basic distributor parameter listing.
드롭인 대체품: C8051F387-GM — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: C8051F387-GM (동일 폼 팩터 및 풋프린트) — 차이점: Communication Interfaces, Flash Memory, Package, Product Type, RAM.
C8051F381-GM
✅ 드롭인가격 문의
데이터시트 보기 →C8051F385-GM
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
C8051F387-GMR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
C8051F387-GM 최대 정격 & 전기적 특성
| Product Type | 8-bit 8051 microcontroller |
| Manufacturer | Silicon Labs |
| Series | C8051F38x |
| 최대 클록 주파수 | 50 MHz |
| Maximum Performance | 48 MIPS |
| Flash Memory | 32 KB (32K x 8) |
| RAM | 2.25 KB (2.25K x 8) |
| Supply Voltage Range | 2.7 V to 5.25 V |
| 패키지 | 32-QFN (5 x 5 mm) |
| 실장 유형 | Surface mount |
| Automotive Qualification | AEC-Q100 qualified |
| Maximum Operating Temperature | 85 °C |
| ADC | Integrated |
| Communication Interfaces | Integrated |
| Core Architecture | 8051 |
| Program Memory Type | Flash |
C8051F387-GM 32-qfn (5 x 5 mm) 핀 구성 가이드
C8051F387-GM(32-qfn (5 x 5 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: C8051F387-GM.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
C8051F387-GM 적합 용도: 6 애플리케이션s: Automotive Body Control Module, Industrial Sensor Aggregation, Compact Motor Control Subsystem, Communication-Enabled Embedded Control, Automotive Diagnostics Gateway, Temperature-Conditioned Control Module.
Automotive Body Control Module
The C8051F387-GM suits compact automotive body-control tasks where an AEC-Q100-qualified 8051 MCU must manage inputs, timers, communications, and actuator commands in a small board area. Its 50 MHz core provides processing headroom for protocol handling and control logic, while 32 KB of Flash and 2.25 KB of RAM support embedded firmware, configuration data, and short diagnostic buffers. The 32-QFN 5 x 5 mm package also leaves more board space for power, communications, and protection components. Confirm peripheral assignments, exposed-pad layout, and automotive qualification requirements against the manufacturer documentation before production release.
추천
Industrial Sensor Aggregation
The C8051F387-GM is appropriate for industrial sensor-hub designs that collect analog measurements, apply filtering, and forward processed data over a serial interface. Its integrated ADC reduces the need for a separate converter, while the 50 MHz core can manage multiple sampling and control tasks. The 2.25 KB RAM provides working space for calibration values and short sample buffers, and 32 KB of Flash is sufficient for control routines and interface stacks. The 2.7 V to 5.25 V operating range supports common industrial rails. Validate channel counts, conversion performance, and communication resources against the device datasheet.
추천
Compact Motor Control Subsystem
The C8051F387-GM can serve as the control processor in a compact motor-control subsystem where fast deterministic execution, mixed-signal sensing, and limited board area are important. The 50 MHz core provides scheduling headroom for closed-loop control, fault handling, and communication updates. Its integrated ADC supports analog feedback acquisition, while the Flash and RAM resources hold control tables, state variables, and diagnostic data. Automotive qualification and operation to 85 °C make the device relevant to vehicle or industrial actuator subsystems. Confirm timer, PWM, capture, and fault-response resources in the manufacturer peripheral reference before assigning the part.
추천
Communication-Enabled Embedded Control
The C8051F387-GM works well in compact embedded controllers that must combine local decision logic with an external communications link. Its integrated communication interfaces can reduce the component count when the required protocol is available in the selected device configuration, while the 50 MHz core leaves processing headroom for framing, buffering, and supervisory tasks. The 2.25 KB RAM is suitable for short protocol buffers, and 32 KB of Flash supports application firmware and configuration. Use the manufacturer documentation to identify the exact serial interfaces, supported baud rates, and peripheral multiplexing options for the required system architecture.
추천
Automotive Diagnostics Gateway
A diagnostics gateway can use the C8051F387-GM to translate messages between vehicle networks while maintaining local fault logging. The 50 MHz 8051 core supports protocol processing and deterministic scheduling, while 2.25 KB of RAM accommodates transient message and status data. Its AEC-Q100 qualification is relevant for automotive deployment, and the 32-QFN package keeps the implementation compact enough for a central electronics module or gateway board. Exact network-interface availability, protocol support, and timing characteristics must be confirmed in the device data sheet rather than inferred from the family name.
추천
Temperature-Conditioned Control Module
The C8051F387-GM is a practical choice for temperature-conditioned industrial or vehicle electronics that require operation to 85 °C and automotive-grade production controls. Its integrated ADC can monitor system or process signals, while the 50 MHz core performs regulation, sequencing, and fault management. Operating from 2.7 V to 5.25 V allows deployment from 3.3 V or 5 V rails, and the compact 32-QFN footprint assists with space-constrained enclosures. Designers should verify the complete thermal profile, exposed-pad power distribution, and temperature-dependent limits in the manufacturer documentation.
추천
추천 제품 요약
엔지니어링 참조 데이터: C8051F387-GM — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | C8051F381-GM | C8051F385-GM | C8051F387-GMR |
|---|---|---|---|---|
| Package | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Core Architecture | 8051 | 8051 | 8051 | 8051 |
주요 차별점
- Automotive-grade qualification with an 85 °C operating rating (vs C8051F381-GM)
- Defined 32 KB Flash and 2.25 KB RAM configuration (vs C8051F385-GM)
- Same core speed and electrical configuration with an alternate order code (vs C8051F387-GMR)
설계 노트
Use the manufacturer package drawing and land pattern for the 32-QFN 5 x 5 mm device, paying particular attention to the exposed thermal pad. Place supply and ground decoupling capacitors close to their corresponding pins, and connect the exposed pad to the ground plane with short, low-impedance vias. Confirm pin numbering against the pin-description table before routing the oscillator, programming interface, analog inputs, and communications.
The operating-temperature rating reaches 85 °C, so thermal design must account for both internal dissipation and enclosure temperature. The QFN exposed pad is the principal heat-transfer path and depends on adequate copper area and via density. Estimate junction rise from calculated device power, ambient temperature, and the manufacturer's thermal-characteristics data. Use an estimated calculation rather than a catalog limit when deciding whether additional copper or airflow is required.
Keep analog inputs and their reference routing away from switching nodes, high-current outputs, and crystal-clock traces. Use a continuous ground reference beneath signal paths, keep the oscillator loop compact, and follow the recommended decoupling topology in the manufacturer application information. Because the MCU integrates an ADC, stable reference and power-supply routing directly affect measurement repeatability and should be verified with board-level testing.
Do not treat a QFN-32 package match as proof of software or functional interchangeability. Before replacing the C8051F387-GM with C8051F381-GM or C8051F385-GM, compare memory capacity, port multiplexing, interrupt assignments, analog channels, timers, communication peripherals, clock requirements, and package pins. Validate the new firmware and production programming procedure on the candidate device before releasing the PCB for volume assembly.
규정 준수 정보
Silicon Labs describes the C8051F387-GM as auto-grade qualified and tested to AEC-Q100 specification with enhanced temperature operation up to 85 °C. RoHS, REACH, halogen-free, and conflict-minerals statuses were not identified in the manufacturer listing text.