Texas Instruments

CD40102BD - 8-Stage BCD Down Counter | Texas Instruments

MPN: CD40102BD ✗ Son Kullanım Zamanı
3 V to 18 V Vdss CDIP-16 Package 4.8 MHz Speed
MOQ: 1 |

CD40102BD Genel Bakış

Texas Instruments CD40102BD is a CMOS 8-stage, presettable synchronous down counter packaged in a 16-pin ceramic dual in-line package. It operates across a 3 V to 18 V supply range, accepts positive-edge clock transitions, and supports counting frequencies up to 4.8 MHz. The device is designed for decade-oriented counting, programmable sequencing, frequency division, and industrial control logic requiring BCD-compatible outputs.

A synchronous binary-coded decimal counter is a type of logic counter that advances or decrements its internal state on an active clock edge and presents each state through four parallel BCD output lines. The CD40102BD belongs to the CMOS CD4000 logic family, where the counter chain is synchronously clocked and the parallel outputs retain BCD count formatting. This places the device within the broader hierarchy of counters and dividers, digital logic ICs, and semiconductor components.

The primary electrical features include a 3 V to 18 V operating supply range, a maximum counting rate of 4.8 MHz, and positive-edge clocking. Its BCD outputs provide four binary-weighted bits per decade, while preset and control inputs allow a count to be loaded before normal decrementing begins. These functions make the counter useful where a system must count down in decimal steps rather than operate as a conventional binary counter.

The CD40102BD uses synchronous counter stages so the counting states change on the same clock edge rather than propagating as asynchronous ripple events. Synchronous operation reduces output-transition uncertainty and simplifies use in systems requiring repeatable decade states. Because it operates from the CD4000 CMOS family, the device is intended for low- and medium-voltage digital logic systems, subject to the detailed limits and test conditions in the manufacturer datasheet.

Typical uses include programmable test-sequence controllers, decade counters for instrumentation, industrial timing systems, clock-divider networks, and embedded automation logic. In a frequency-divider arrangement, the counter stages can divide an input clock by decade-related ratios. In a sequencing circuit, preset inputs establish the starting state and the synchronous outputs provide a repeatable countdown toward zero.

For reliable operation, use the supply voltage and signal levels specified by the manufacturer, connect unused digital inputs to a defined logic level, and observe the maximum clock frequency at the actual supply voltage and temperature. Decoupling capacitance should be placed close to the supply pins, while external reset and preset timing must remain within the datasheet limits.

This page combines manufacturer-device information, lifecycle and sourcing guidance, parameter comparisons, pin-assignment cautions, and practical design notes. It also identifies same-footprint alternatives where documented, helping engineers distinguish a true drop-in replacement from a functionally similar counter that requires a different package or interface.

Drop-in alternatifler için CD40102BD — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

CD40102BD-3

✅ Yerleştirme
📦 CDIP-16
Temperature-grade suffix differs from the standard CD40102BD; the 16-pin CDIP footprint, 3 V to 18 V class, and 4.8 MHz-class counter function are retained.

📋 Katalogda Olmayan Referans Alternatifi

CD40102BD Maksimum Değerlendirmeler & Elektriksel Özellikler

Device Type 8-stage presettable synchronous down counter
Logic Family CD4000 CMOS
Counting Direction Down
Counting Sequence Binary-coded decimal (BCD)
Supply Voltage Range 3 V to 18 V
Azami Saat Hızı 4.8 MHz
Clock Edge Positive edge
Çıkış Konfigürasyonu 4-bit parallel BCD outputs
Pin Sayısı 16 pins
Paket CDIP-16
Montaj Türü Through-hole
Reset Function Asynchronous reset; details require datasheet confirmation
Preset Function Parallel preset; details require datasheet confirmation
RoHS Durumu Compliant

CD40102BD cdip-16 Pin Yapısı Kılavuzu

CD40102BD (cdip-16 paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

cdip-16 paket pin çizelgesi için CD40102BD

Ayrıntılı pin çıkış verisi mevcut değil: CD40102BD.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

CD40102BD için uygundur 6 uygulamas: Programmable Test Sequence Controller, Instrumentation Decade Counter, Frequency Divider Network, Industrial Timing Sequencer, Digital Clock and Timer, Event Counter and Batch Control.

🏭

Programmable Test Sequence Controller

The CD40102BD suits a programmable test-sequence controller because its eight synchronous stages count downward in BCD format while the parallel preset inputs establish a defined starting state. A positive clock edge advances each stage together, allowing external control logic to observe repeatable decade states without waiting for ripple-style transitions to propagate across separate stages. The 4.8 MHz maximum clock frequency provides additional timing headroom for low-speed sequencing, while the 3 V to 18 V supply range accommodates legacy CMOS control systems. Design the preset and reset paths so they remain stable around active clock edges, and verify the required count range against the eight available decimal stages.

🔧

Instrumentation Decade Counter

The CD40102BD can implement a decade counter for instrumentation and event-counting systems requiring a human-readable BCD output rather than a binary-only count. Each four-bit output group represents one decimal digit, allowing counters, displays, or data-capture logic to process the count directly. The positive-edge input provides a defined update point, and the listed 4.8 MHz maximum counting rate supports faster event rates than many electromechanical counters. Because the device counts down, the circuit must preset the desired terminal count before the count begins. Validate signal settling at the output pins and avoid using the outputs as asynchronous data without first synchronizing them to the system clock.

📡

Frequency Divider Network

The CD40102BD is suitable for a programmable frequency-divider network because its eight cascaded stages count in decade format and expose parallel count states. Presetting the counter establishes the starting count needed for the intended division sequence, while the clock input receives the signal to be divided. The 4.8 MHz maximum counting frequency provides a useful ceiling, although the usable operating point must also satisfy voltage and temperature timing limits. Keep the divider output synchronized to the divided clock, provide clean clock edges, and account for propagation delay when determining the valid setup and hold windows at the connected logic.

⚙️

Industrial Timing Sequencer

The CD40102BD can serve as the count element in an industrial timing sequencer where a set number of clock periods must trigger discrete control steps. A preset value defines the starting count, and each positive clock edge moves the eight-stage counter toward its terminal state. Synchronous stage updates produce a more repeatable state sequence than a collection of independently rippling counters. The 3 V to 18 V supply range supports integration with conventional CMOS control logic, while the 4.8 MHz clock rating permits operation faster than typical machine-cycle timing. Add suitable isolation or driver circuits when long external wires or high-current relay loads are involved, and keep timing-critical reset and preset signals away from noisy switching nodes.

⏱️

Digital Clock and Timer

The CD40102BD can contribute to a digital clock or timer by counting clock pulses and presenting the active count as parallel BCD data. Its positive-edge operation simplifies connection to a system clock, and the preset function can establish the initial count needed when timing begins. The 16-pin CDIP package is particularly useful for repairable, through-hole industrial equipment where component interchangeability and socketed assembly are important. The 4.8 MHz maximum frequency is far above ordinary display-clock rates, leaving margin for system clock division and control-logic delays. The design should still account for counter-output settling time before sampling BCD bits, particularly when multiple outputs change on the same active edge.

🧩

Event Counter and Batch Control

The CD40102BD is useful in event-counting and batch-control equipment that groups events in decimal increments. The parallel BCD outputs reduce conversion effort when the count must be inspected or recorded by display, interface, or threshold logic. Presetting the counter before a batch starts provides a repeatable operating state, while the synchronous decrement sequence supports deterministic control updates. Although the maximum counting rate is 4.8 MHz, practical event inputs may require debouncing or conditioning before reaching the clock pin. Choose pull-up or pull-down values that maintain valid CMOS logic levels, keep the clock trace short, and separate it from inductive or switching signals to prevent false counts.

What is the CD40102BD?
The CD40102BD is a Texas Instruments CMOS 8-stage, presettable synchronous down counter with parallel BCD outputs. According to the manufacturer datasheet, it operates from 3 V to 18 V, counts on the positive clock edge, and is offered in a 16-pin CDIP package. It is intended for decade counting, programmable sequencing, timing, and frequency-division applications.
What is the supply voltage range of the CD40102BD?
The CD40102BD operates from 3 V to 18 V. The manufacturer datasheet identifies the device as a CD4000-family CMOS counter, so the supply range allows operation across low-voltage and higher-voltage legacy CMOS systems. Designers should also maintain valid input logic levels and confirm the timing limits at the actual operating voltage and temperature.
What is the maximum clock frequency of the CD40102BD?
The CD40102BD has a listed maximum clock frequency of 4.8 MHz. According to the manufacturer documentation, the counter advances on the positive clock edge. Timing margin depends on supply voltage and temperature, so a design operating close to 4.8 MHz should be checked against the relevant datasheet conditions and the propagation-delay behavior of connected logic.
Where can I download the CD40102BD datasheet PDF?
The manufacturer datasheet is available through Texas Instruments at https://www.ti.com/lit/gds/CD40102B. It is the primary document for the truth table, terminal assignments, electrical characteristics, recommended operating conditions, and application details. Use its pin-assignment table when assigning PCB tracks because the CD40102BD is a 16-pin through-hole counter rather than a surface-mount logic device.
Where is the CD40102BD pinout located?
The CD40102BD pinout is located in the terminal-assignment diagram of the manufacturer datasheet at https://www.ti.com/lit/gds/CD40102B. The component uses a 16-pin CDIP package. Use the numbered package drawing and pin table together, especially for the clock, reset, preset, and parallel BCD output connections.
Is the CD40102BD active-high or active-low clocked?
The CD40102BD is positive-edge clocked, meaning the counter changes state on the rising transition of the clock input. The verified product description identifies positive-edge operation and a maximum counting frequency of 4.8 MHz. In a cascaded design, the driving source must meet the input rise-time and pulse-width requirements in the manufacturer datasheet.
What can replace the CD40102BD?
The closest documented same-footprint replacement is the Texas Instruments CD40102BD-3, which retains the CD40102BD family construction and temperature-grade option in the same CDIP-16 format. No additional pin-compatible alternatives could be confirmed from the available cross-reference records. Verify reset and preset behavior, supply range, clock rate, and temperature limits before approving any substitution.
Can CD40102BD-3 replace the standard CD40102BD?
The Texas Instruments CD40102BD-3 is the closest documented same-family alternative because it is identified as a CD40102BD variant and shares the 16-pin CDIP footprint. The principal difference is the -3 temperature-grade designation. Review the ordering table and full electrical specifications before using it where the standard CD40102BD qualification or operating-temperature limits govern the design.
What is the best Texas Instruments alternative to the CD40102BD?
The best documented Texas Instruments alternative is the CD40102BD-3 because it remains in the same counter family and preserves the CDIP-16 footprint. The suffix change identifies a different temperature-grade option rather than a different counter architecture. For a production release, compare the exact operating-temperature limits and any grade-specific qualification requirements against the original system requirement.
Is CD40102BD suitable for BCD sequencing and frequency division?
The CD40102BD is suitable for BCD sequencing and frequency-division designs because it is an 8-stage synchronous down counter with four parallel BCD output bits. Preset inputs can establish an initial state, while successive positive clock edges count downward in decade format. Confirm whether the required divide ratio can be represented by the available count and preset values.
Where can I buy the CD40102BD online?
Use the Request a Quote form on this page to ask for CD40102BD availability, current lead time, and order handling. The CD40102BD is a catalog part with a 16-pin CDIP package, but current stock should be confirmed for the exact manufacturer part number and package suffix. The manufacturer product documentation remains the source for technical qualification.
What is the price of the CD40102BD?
Use the Request a Quote form on this page for a current CD40102BD quotation. The structured pricing data tracks a recent one-unit reference, but purchasing prices can change with inventory, quantity, and market conditions. A quote request ensures that the supplied commercial terms correspond to the exact CD40102BD package suffix and required quantity.
What is the lead time and stock status for the CD40102BD?
Request the current CD40102BD lead time and stock position through the Request a Quote form on this page. The CD40102BD is shown as an in-stock catalog listing in one channel, but that observation does not establish a guaranteed allocation for a production order. Include your required quantity, date code needs, and approved-source requirements with the request.
What are the key specifications of CD40102BD that engineers should know?
The key CD40102BD specifications are an 8-stage synchronous down-counter architecture, four parallel BCD outputs, a 3 V to 18 V supply range, positive-edge clocking, a 4.8 MHz maximum counting rate, and a 16-pin CDIP package. The device also supports preset and reset functions. Use the manufacturer datasheet for detailed voltage, current, timing, and temperature limits.
Is the CD40102BD RoHS compliant?
The CD40102BD is identified as RoHS compliant in the product listing. RoHS compliance addresses restricted substances in the component and does not by itself establish suitability for every system requirement. Check halogen-free status, REACH declarations, automotive qualification, and other environmental or quality requirements separately before production approval.

Mühendislik referans verileri: CD40102BD — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the CD40102BD when the system requires an 8-stage synchronous down counter with parallel BCD outputs, a positive clock edge, and operation across a 3 V to 18 V supply range. Its CDIP-16 construction is useful for through-hole industrial equipment, repairable assemblies, and designs that use sockets. Choose the CD40102BD-3 when the same footprint and counter function are needed but the -3 temperature grade is preferred or required. Choose the SN74LS93DR for a related 4-bit binary counter organized around divide-by-2 and divide-by-8 stages rather than BCD decade counting. Choose the SN74LS90DR when a divide-by-10 counter architecture is more appropriate. Before selecting any alternative, confirm the count direction, number of stages, reset and preset truth table, output timing, supply voltage, clock frequency, temperature range, and package footprint. A functional similarity alone is not sufficient; replacement approval should require pin-by-pin and timing-level verification.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün CD40102BD-3
Brand Texas Instruments Texas Instruments
Package CDIP-16 CDIP-16
Device Type 8-stage presettable synchronous down counter CD40102BD-family counter
Counting Direction Down Down
Counting Sequence Binary-coded decimal (BCD) Binary-coded decimal (BCD)
Clock Edge Positive edge Positive edge
Temperature Grade Standard grade -3 grade

Ana Farklılayıcılar

  • BCD-formatted synchronous down counting (karşılaştırma:SN74LS93DR)
  • Broad CMOS supply operating range (karşılaştırma:SN74LS90DR)
  • Same-package temperature-grade option (karşılaştırma:CD40102BD-3)

Tasarım Notları

Treat reset and preset as control signals whose relationship to the active clock edge determines whether the counter reloads immediately or advances concurrently. Use the truth table in the manufacturer datasheet to define the required stable logic levels, and do not infer reset priority from the function name alone. Firmware and discrete-logic designers should also avoid changing preset values while reset is active unless the truth table explicitly permits that transition.

Place the bypass capacitor close to the device supply pins and connect it to the corresponding ground reference with a short return path. Route the clock and control inputs away from high-current switching nodes and long parallel traces that can couple clock noise into the counter. In a through-hole implementation, inspect solder bridges and pin orientation carefully because incorrect BCD output or preset wiring can resemble a defective counter.

The CD40102BD changes counter states on the positive clock edge, so maintain a clean rising transition and respect the specified clock pulse-width and transition-time limits. When a slow or noisy source drives the clock, add a suitable conditioning stage rather than relying on the counter to reject false edges. Sample parallel BCD outputs only after their settling interval, particularly if multiple bits are captured simultaneously.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

RoHS compliance is identified in a product listing. The other declarations and qualification attributes require confirmation from the manufacturer or an authorized compliance record.

Veri doğrulanma tarihi: 2026-11-19 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

CD40102BD datasheet CD40102BD pinout CD40102BD datasheet pdf CD40102BD equivalent CD40102BD replacement CD40102BD price CD40102BD stock Texas Instruments CD40102BD CD40102BD CDIP-16 pinout CD40102BD 4.8MHz counter CD40102BD BCD down counter CD40102BD vs CD40102BD-3

İlgili Bileşenler ve Terimler

Texas Instruments CD40102BD CD40102BD-3 CD4000 CMOS logic family CMOS 8-stage synchronous down counter binary-coded decimal BCD counter counter and divider digital logic IC semiconductor preset input reset input positive-edge clock maximum clock frequency supply voltage parallel output CDIP-16 through-hole package industrial timing frequency divider digital instrumentation programmable sequencing
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle