CD40102BD - 8-Stage BCD Down Counter | Texas Instruments
MPN: CD40102BD ✗ اختتامِ زندگیCD40102BD جائزہ
A synchronous binary-coded decimal counter is a type of logic counter that advances or decrements its internal state on an active clock edge and presents each state through four parallel BCD output lines. The CD40102BD belongs to the CMOS CD4000 logic family, where the counter chain is synchronously clocked and the parallel outputs retain BCD count formatting. This places the device within the broader hierarchy of counters and dividers, digital logic ICs, and semiconductor components.
The primary electrical features include a 3 V to 18 V operating supply range, a maximum counting rate of 4.8 MHz, and positive-edge clocking. Its BCD outputs provide four binary-weighted bits per decade, while preset and control inputs allow a count to be loaded before normal decrementing begins. These functions make the counter useful where a system must count down in decimal steps rather than operate as a conventional binary counter.
The CD40102BD uses synchronous counter stages so the counting states change on the same clock edge rather than propagating as asynchronous ripple events. Synchronous operation reduces output-transition uncertainty and simplifies use in systems requiring repeatable decade states. Because it operates from the CD4000 CMOS family, the device is intended for low- and medium-voltage digital logic systems, subject to the detailed limits and test conditions in the manufacturer datasheet.
Typical uses include programmable test-sequence controllers, decade counters for instrumentation, industrial timing systems, clock-divider networks, and embedded automation logic. In a frequency-divider arrangement, the counter stages can divide an input clock by decade-related ratios. In a sequencing circuit, preset inputs establish the starting state and the synchronous outputs provide a repeatable countdown toward zero.
For reliable operation, use the supply voltage and signal levels specified by the manufacturer, connect unused digital inputs to a defined logic level, and observe the maximum clock frequency at the actual supply voltage and temperature. Decoupling capacitance should be placed close to the supply pins, while external reset and preset timing must remain within the datasheet limits.
This page combines manufacturer-device information, lifecycle and sourcing guidance, parameter comparisons, pin-assignment cautions, and practical design notes. It also identifies same-footprint alternatives where documented, helping engineers distinguish a true drop-in replacement from a functionally similar counter that requires a different package or interface.
کے لیے ڈراپ اِن متبادل CD40102BD — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
CD40102BD-3
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
CD40102BD زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | 8-stage presettable synchronous down counter |
| Logic Family | CD4000 CMOS |
| Counting Direction | Down |
| Counting Sequence | Binary-coded decimal (BCD) |
| Supply Voltage Range | 3 V to 18 V |
| زیادہ سے زیادہ کلاک فریکوئنسی | 4.8 MHz |
| Clock Edge | Positive edge |
| آؤٹ پٹ کنفیگریشن | 4-bit parallel BCD outputs |
| پن کی تعداد | 16 pins |
| پیکیج | CDIP-16 |
| ماؤنٹنگ ٹائپ | Through-hole |
| Reset Function | Asynchronous reset; details require datasheet confirmation |
| Preset Function | Parallel preset; details require datasheet confirmation |
| RoHS اسٹیٹس | Compliant |
CD40102BD cdip-16 پن کنفیگریشن گائیڈ
CD40102BD (cdip-16 پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں CD40102BD.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
CD40102BD کے لیے موزوں ہے 6 ایپلیکیشنs: Programmable Test Sequence Controller, Instrumentation Decade Counter, Frequency Divider Network, Industrial Timing Sequencer, Digital Clock and Timer, Event Counter and Batch Control.
Programmable Test Sequence Controller
The CD40102BD suits a programmable test-sequence controller because its eight synchronous stages count downward in BCD format while the parallel preset inputs establish a defined starting state. A positive clock edge advances each stage together, allowing external control logic to observe repeatable decade states without waiting for ripple-style transitions to propagate across separate stages. The 4.8 MHz maximum clock frequency provides additional timing headroom for low-speed sequencing, while the 3 V to 18 V supply range accommodates legacy CMOS control systems. Design the preset and reset paths so they remain stable around active clock edges, and verify the required count range against the eight available decimal stages.
تجویز کردہ
Instrumentation Decade Counter
The CD40102BD can implement a decade counter for instrumentation and event-counting systems requiring a human-readable BCD output rather than a binary-only count. Each four-bit output group represents one decimal digit, allowing counters, displays, or data-capture logic to process the count directly. The positive-edge input provides a defined update point, and the listed 4.8 MHz maximum counting rate supports faster event rates than many electromechanical counters. Because the device counts down, the circuit must preset the desired terminal count before the count begins. Validate signal settling at the output pins and avoid using the outputs as asynchronous data without first synchronizing them to the system clock.
تجویز کردہ
Frequency Divider Network
The CD40102BD is suitable for a programmable frequency-divider network because its eight cascaded stages count in decade format and expose parallel count states. Presetting the counter establishes the starting count needed for the intended division sequence, while the clock input receives the signal to be divided. The 4.8 MHz maximum counting frequency provides a useful ceiling, although the usable operating point must also satisfy voltage and temperature timing limits. Keep the divider output synchronized to the divided clock, provide clean clock edges, and account for propagation delay when determining the valid setup and hold windows at the connected logic.
تجویز کردہ
Industrial Timing Sequencer
The CD40102BD can serve as the count element in an industrial timing sequencer where a set number of clock periods must trigger discrete control steps. A preset value defines the starting count, and each positive clock edge moves the eight-stage counter toward its terminal state. Synchronous stage updates produce a more repeatable state sequence than a collection of independently rippling counters. The 3 V to 18 V supply range supports integration with conventional CMOS control logic, while the 4.8 MHz clock rating permits operation faster than typical machine-cycle timing. Add suitable isolation or driver circuits when long external wires or high-current relay loads are involved, and keep timing-critical reset and preset signals away from noisy switching nodes.
تجویز کردہ
Digital Clock and Timer
The CD40102BD can contribute to a digital clock or timer by counting clock pulses and presenting the active count as parallel BCD data. Its positive-edge operation simplifies connection to a system clock, and the preset function can establish the initial count needed when timing begins. The 16-pin CDIP package is particularly useful for repairable, through-hole industrial equipment where component interchangeability and socketed assembly are important. The 4.8 MHz maximum frequency is far above ordinary display-clock rates, leaving margin for system clock division and control-logic delays. The design should still account for counter-output settling time before sampling BCD bits, particularly when multiple outputs change on the same active edge.
تجویز کردہ
Event Counter and Batch Control
The CD40102BD is useful in event-counting and batch-control equipment that groups events in decimal increments. The parallel BCD outputs reduce conversion effort when the count must be inspected or recorded by display, interface, or threshold logic. Presetting the counter before a batch starts provides a repeatable operating state, while the synchronous decrement sequence supports deterministic control updates. Although the maximum counting rate is 4.8 MHz, practical event inputs may require debouncing or conditioning before reaching the clock pin. Choose pull-up or pull-down values that maintain valid CMOS logic levels, keep the clock trace short, and separate it from inductive or switching signals to prevent false counts.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا CD40102BD — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | CD40102BD-3 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | CDIP-16 | CDIP-16 |
| Device Type | 8-stage presettable synchronous down counter | CD40102BD-family counter |
| Counting Direction | Down | Down |
| Counting Sequence | Binary-coded decimal (BCD) | Binary-coded decimal (BCD) |
| Clock Edge | Positive edge | Positive edge |
| Temperature Grade | Standard grade | -3 grade |
اہم امتیازی خصوصیات
- BCD-formatted synchronous down counting (بمقابلہSN74LS93DR)
- Broad CMOS supply operating range (بمقابلہSN74LS90DR)
- Same-package temperature-grade option (بمقابلہCD40102BD-3)
ڈیزائن نوٹس
Treat reset and preset as control signals whose relationship to the active clock edge determines whether the counter reloads immediately or advances concurrently. Use the truth table in the manufacturer datasheet to define the required stable logic levels, and do not infer reset priority from the function name alone. Firmware and discrete-logic designers should also avoid changing preset values while reset is active unless the truth table explicitly permits that transition.
Place the bypass capacitor close to the device supply pins and connect it to the corresponding ground reference with a short return path. Route the clock and control inputs away from high-current switching nodes and long parallel traces that can couple clock noise into the counter. In a through-hole implementation, inspect solder bridges and pin orientation carefully because incorrect BCD output or preset wiring can resemble a defective counter.
The CD40102BD changes counter states on the positive clock edge, so maintain a clean rising transition and respect the specified clock pulse-width and transition-time limits. When a slow or noisy source drives the clock, add a suitable conditioning stage rather than relying on the counter to reject false edges. Sample parallel BCD outputs only after their settling interval, particularly if multiple bits are captured simultaneously.
تعمیل کی معلومات
RoHS compliance is identified in a product listing. The other declarations and qualification attributes require confirmation from the manufacturer or an authorized compliance record.