Harris Corporation

CD40103BD - 8-Bit Synchronous Down Counter | Harris

MPN: CD40103BD ✓ Aktif
16-CDIP ceramic dual-in-line package Package Positive edge Speed
MOQ: 1 |

CD40103BD Genel Bakış

The Harris Corporation CD40103BD is an 8-bit CMOS presettable synchronous binary down counter packaged in a 16-lead ceramic dual-in-line package. It contains one counter element, counts downward on each positive clock edge, and supports parallel loading of the eight count-data inputs for initialization from 0 through 255. The through-hole 16-CDIP construction and military temperature designation identify it as a ruggedized counter intended for demanding digital control and timing systems.

A synchronous binary counter is a digital logic device that advances through a fixed binary sequence in response to clock transitions. Unlike an asynchronous ripple counter, the CD40103BD changes its outputs at the same clock transition, reducing accumulated propagation delay across the eight output stages. Presettable counters add a parallel-load function so the internal count can be set to a chosen value before counting resumes. This device therefore belongs to the CMOS 4000-series counter family and the broader category of counters, dividers, and logic ICs.

Principal features include 8-bit counting capacity, binary count direction, one counter element, positive-edge triggering, synchronous operation, and a preset capability. The counter operates from a dual power supply, making its clock, preset, and count-data interface electrically compatible with other CD4000-series CMOS devices. Because the counter is synchronous, it is better suited to accurate frequency division and multi-digit count sequencing than a ripple counter with cumulative stage delay.

Typical uses include programmable frequency dividers, digital timing chains, industrial sequence controllers, event counters, timing-reference circuits, and test equipment. In each case, the eight count outputs can represent the current binary count, divide an input clock by a selected power of two, or provide parallel count data for downstream decoding. The synchronous count transition also helps maintain predictable timing relationships between adjacent counter outputs.

In a new PCB design, follow the manufacturer pin-description table when connecting the clock, count-data, preset, carry, and reset inputs. Allow adequate signal-transition time for the CMOS inputs, and use pull-down or pull-up resistors where an unused control input requires a defined bias. Treat the 16-lead ceramic DIP as a through-hole package with no exposed thermal pad. Before substituting a different manufacturer or temperature grade, verify the counter direction, clock-edge convention, preset polarity, reset behavior, supply voltage, and absolute maximum ratings in the relevant datasheet.

This page consolidates the available manufacturer and distributor information for CD40103BD, compares pin-compatible counter options, and summarizes the design checks needed for reliable integration into legacy CMOS and industrial counter systems.

Drop-in alternatifler için CD40103BD — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller CD40103BD (aynı form faktörü ve ayağa oturma) — farklı olan Preset Capability.

Texas Instruments
Preset Capability: Yes, presettable parallel count
İle Karşılaştır CD40103BD →

CD40103BE

✅ Yerleştirme
Texas Instruments
📦 16-pin DIP
CMOS binary synchronous down counter · 1 element · 8 stages · 8 bits · Down · Positive edge · Yes, presettable parallel count · Active when the internal count is zero

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

CD40103BM

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 16-pin DIP
Same CD40103B synchronous down-counter function and 16-pin DIP footprint, with M grade designation instead of D ceramic-package code

📋 Katalogda Olmayan Referans Alternatifi

CD40103BF3A

✅ Yerleştirme
📦 16-pin DIP
Same CD40103B function and 16-pin ceramic DIP construction, with F3A package suffix and manufacturer-specific qualification

📋 Katalogda Olmayan Referans Alternatifi

CD40103BC

✅ Yerleştirme
📦 16-pin DIP
CD4000-series 8-bit synchronous down counter in a 16-pin DIP; C suffix denotes the commercial package grade and differs from military qualification

📋 Katalogda Olmayan Referans Alternatifi

CD40103BP

✅ Yerleştirme
📦 16-pin DIP
CD4000-series 8-bit synchronous down counter in a 16-pin plastic DIP; P suffix differs from the CD40103BD ceramic military package

📋 Katalogda Olmayan Referans Alternatifi

CD40103BD Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 8-Bit Presettable Synchronous Binary Down Counter
Manufacturer Harris Corporation
Logic Family CMOS 4000 Series
Counter Element Count 1 element
Counting Capacity 8 bits
Count Direction Down
Count Sequence Binary
Clock Edge Positive edge
Counter Type Synchronous
Preset Capability Yes, presettable
Package Type 16-CDIP ceramic dual-in-line package
Terminal Count 16 terminals
Montaj Türü Through-hole
Package Shape Rectangular
Temperature Grade Military

CD40103BD rectangular Pin Yapısı Kılavuzu

CD40103BD (rectangular paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

rectangular paket pin çizelgesi için CD40103BD

Ayrıntılı pin çıkış verisi mevcut değil: CD40103BD.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

CD40103BD için uygundur 6 uygulamas: Programmable Frequency Divider, Industrial Event and Cycle Counter, Digital Timing and Sequence Control, Frequency Division for Clock Conditioning, Legacy Instrumentation and Test Equipment, Multistage Counter and Divider Chain.

🔧

Programmable Frequency Divider

The CD40103BD fits a programmable frequency-divider stage because its 8-bit synchronous binary down counter can divide an input clock by a selected power of two or a preset-derived interval. Preset the counter with the intended terminal value, apply the clock to the positive-edge clock input, and decode the count outputs for the required divide ratio. Because the counting transitions are synchronous, decoded outputs are more closely aligned than those from a ripple counter. Confirm the maximum clock rate at the chosen supply voltage and temperature before sizing the clock driver.

🔧

Industrial Event and Cycle Counter

Use the CD40103BD to count machine cycles, product events, or elapsed timing intervals in industrial control equipment. Its 8-bit count range provides 256 states, and the parallel preset capability allows each counting interval to start from a defined value. The positive-edge trigger helps align counting with an external sensor-conditioned clock, while the binary outputs can feed a display driver or comparison logic. For noisy factory environments, protect sensor signals with appropriate filtering and keep the counter supply referenced to the same system ground.

🔧

Digital Timing and Sequence Control

The CD40103BD suits cascaded timing and sequencing circuits where a repeatable binary count drives state transitions. Load a preset value, use the carry output to trigger the next stage, and cascade multiple counters for longer timing intervals. Synchronous count transitions provide predictable relationships between the eight outputs, and the 16-lead ceramic DIP supports through-hole construction on legacy or industrial control boards. Confirm preset and reset polarity in the pin table so the counter starts in the intended state after power restoration.

🔧

Frequency Division for Clock Conditioning

When an existing clock must be reduced to a lower control rate, the CD40103BD provides an 8-bit binary down-counting stage with selectable presets. Preset the counter so its terminal condition occurs at the required division interval, then use one count output as the conditioned clock. Synchronous operation reduces accumulated skew across the count stages, which is valuable when the divided signal feeds another synchronous control block. Evaluate the setup and clock-transition requirements of the counter at the actual supply voltage.

🔧

Legacy Instrumentation and Test Equipment

The CD40103BD is a practical fit for repair and modernization of legacy CMOS test and measurement equipment that requires an 8-bit synchronous binary down counter. The military-grade 16-CDIP construction and through-hole format suit older instrument boards and connectorized assemblies. Its eight parallel count outputs can drive calibration logic, range indicators, or timing markers. Confirm pinout, supply rails, and input levels before installation, since vintage equipment may use nonstandard interface conventions.

🔧

Multistage Counter and Divider Chain

Cascade multiple CD40103BD devices to create wider counting ranges or a multi-decade divider. Each 8-bit stage can present a hexadecimal count, and carry or terminal-count signaling can enable the next device for higher-order counting. Using synchronous counter stages keeps state transitions coordinated compared with independent ripple chains. Check the carry timing, clock loading, and inter-stage logic levels against the manufacturer timing diagrams before cascading devices at high input frequencies.

What is the CD40103BD and what does it do?
The CD40103BD is a Harris Corporation 8-bit CMOS presettable synchronous binary down counter in a 16-CDIP ceramic package. It uses one counter element, counts on the positive clock edge, and provides parallel preset capability. According to the CD40103B family documentation, the device is intended for frequency division, counting, and sequencing applications where a synchronous binary counter is required.
How many bits can the CD40103BD count?
The CD40103BD provides 8 bits of counting capacity, allowing it to represent 256 binary states. It counts downward from a loaded preset value toward the terminal count. The manufacturer identifies the part as a binary counter with one element and an 8-bit count-data bus, making it suitable for division, elapsed-event counting, and programmable sequence control.
Is the CD40103BD synchronous or asynchronous?
The CD40103BD is a synchronous counter. Its count outputs change in response to the same positive clock edge rather than through a sequence of ripple-derived transitions. The CD40103B documentation describes the device as a synchronous down counter, which helps limit cumulative propagation delay when multiple counter outputs are decoded or used to drive timing logic.
What is the difference between CD40103B and CD40103BD?
CD40103B identifies the general CMOS counter family, while CD40103BD identifies the Harris Corporation 16-lead ceramic dual-in-line package ordering code with a military temperature designation. The listing describes the CD40103BD as a 16-CDIP through-hole part. Other family members use different package suffixes, so their mechanical fit and temperature grade must be checked separately.
Where can I download the CD40103BD datasheet PDF?
The manufacturer datasheet is available through the Texas Instruments family page at https://www.ti.com/lit/gpn/cd40103b-mil. It covers the CD40103B counter and its CD40102B companion, including package options. The Harris ordering code CD40103BD corresponds to the 16-lead ceramic dual-in-line version, so use the pin table and ordering information for that package when assigning PCB connections.
Where can I find the CD40103BD pinout?
The CD40103BD pinout is defined in the pin-description table of the CD40103B family datasheet at https://www.ti.com/lit/gpn/cd40103b-mil. Because the listing identifies CD40103BD as a 16-CDIP part, use the 16-lead ceramic package diagram and verify clock, count-data, preset, reset, and carry connections against the datasheet before laying out a replacement PCB.
What can replace the CD40103BD in an existing design?
The CD40103BE from Texas Instruments is a practical pin-compatible starting point because it belongs to the same CD40103B counter family and is offered in a 16-lead dual-in-line plastic package. Verify supply voltage, clock-edge behavior, preset polarity, and temperature grade before substitution. A ceramic-package CD40103BF3A is another family option when a hermetic 16-lead DIP is required.
Is the CD40103BD the same as CD40103BE?
The CD40103BD and CD40103BE implement the same CD40103B down-counter function and use 16-lead dual-in-line packages, but their package materials and ordering codes differ. CD40103BD is identified as the military-grade 16-CDIP version, while CD40103BE is the plastic 16-lead DIP member of the TI family. Verify temperature requirements and environmental sealing before treating them as interchangeable.
What is the best drop-in replacement for CD40103BD?
The best drop-in candidate depends on which package and environmental attributes must be preserved. CD40103BE is the primary 16-DIP option for a plastic-package replacement, while CD40103BF3A preserves the hermetic ceramic-DIP construction. Confirm the supply-voltage limits, operating-temperature range, timing limits, preset polarity, and reset behavior in the manufacturer datasheet for the selected ordering code.
What is the best Texas Instruments equivalent for CD40103BD?
The Texas Instruments CD40103BE is the closest family-member alternative because it is a 16-lead dual-in-line CD40103B counter. It is not a separate functional design, but the package suffix can change temperature grade, material, and sourcing conditions. Use the CD40103BE part data to confirm electrical equivalence and the mechanical fit of the original 16-CDIP footprint.
When should I choose CD40103BD instead of CD40103BE?
Choose CD40103BD when the design requires the military-grade 16-CDIP version identified for Harris Corporation. Choose CD40103BE when the same CD40103B counter function is needed in a 16-lead plastic DIP and the application does not require the hermetic ceramic package. The final decision should also consider availability, temperature qualification, and environmental exposure.
Is CD40103BD suitable for industrial frequency division?
The CD40103BD is suitable for frequency-division and timing applications that require an 8-bit synchronous down counter. Its synchronous operation reduces the accumulated delay associated with ripple counting, while the parallel preset function allows selectable divide ratios and programmable starting states. Confirm the counter's maximum operating frequency at the selected supply voltage and temperature before finalizing the clock circuit.
How do I design the unused inputs on a CD40103BD?
Tie unused CMOS inputs to a defined valid logic level rather than leaving them floating. Use the manufacturer pin-description table to identify which preset, reset, and count-data pins are unused in the design. Pull resistors can establish the required bias when a shared bus or partially populated counter stage makes a direct tie impractical.
Where can I buy CD40103BD and what is the current lead time?
Use the Request a Quote form on this page to request CD40103BD availability, current lead time, and a quotation for the exact 16-CDIP ordering code. The CD40103BD is a military-grade Harris Corporation counter, so lead time can depend on remaining stock and the age of the package. Do not substitute a different package suffix without a mechanical and electrical review.
What are the key specifications of CD40103BD that engineers should know?
The CD40103BD is a Harris Corporation 8-bit CMOS presettable synchronous binary down counter with one counter element, positive-edge clocking, and a 16-CDIP military-grade through-hole package. According to the family documentation, it is supplied in 16-lead dual-in-line ceramic packaging. Supply limits, operating temperature, clock frequency, and power dissipation must be confirmed from the manufacturer datasheet for design sign-off.

Mühendislik referans verileri: CD40103BD — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose CD40103BD when an existing design specifically requires the Harris Corporation military-grade 16-CDIP version of the CD40103B family. Its defining characteristics are 8-bit binary counting, synchronous down-count operation, positive-edge clocking, and parallel preset capability. CD40103BE is a practical alternative when a 16-lead plastic DIP from the TI family is acceptable and the environmental qualification permits it. CD40103BF3A is the closer option when retaining a ceramic 16-lead DIP is important. CD40103BC and CD40103BP provide additional sourcing options within the CD4000 counter family, but the commercial-grade suffix on CD40103BC may not satisfy military temperature requirements. For every option, verify the supply-voltage range, operating-temperature limits, timing characteristics, pin assignments, and control-input polarities before approving a replacement.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün CD40103BE CD40103BM CD40103BF3A CD40103BC CD40103BP
Package 16-CDIP ceramic DIP 16-lead plastic DIP 16-lead DIP 16-lead ceramic DIP 16-lead DIP 16-lead plastic DIP
Brand Harris Corporation Texas Instruments Texas Instruments Texas Instruments Fairchild RCA
Counter Type Binary down counter Binary down counter Binary down counter Binary down counter Binary down counter Binary down counter
Count Capacity 8 bits 8 bits 8 bits 8 bits 8 bits 8 bits
Counting Mode Synchronous Synchronous Synchronous Synchronous Synchronous Synchronous
Clock Edge Positive edge Positive edge Positive edge Positive edge Positive edge Positive edge
Preset Function Yes Yes Yes Yes Yes Yes
Logic Technology CMOS CMOS CMOS CMOS CMOS CMOS

Ana Farklılayıcılar

  • Preserves the military-grade 16-CDIP construction (karşılaştırma:CD40103BE)
  • Maintains the same CD40103B counter architecture (karşılaştırma:CD40103BF3A)
  • Uses synchronous counting rather than ripple-derived transitions (karşılaştırma:CD40103BC)

Tasarım Notları

Do not assume that every CD40103 ordering code is an unrestricted substitute. The D suffix identifies the Harris 16-CDIP military-grade part, while E, M, F3A, C, and P denote different package, material, or temperature combinations. Before replacement, verify pin functions, preset polarity, reset behavior, supply limits, and temperature requirements in the manufacturer datasheet for the exact ordering code.

Keep clock, preset, and count-data traces short and route them away from noisy switching nodes. The CD40103BD changes its count outputs on a positive edge, so clock bounce or ringing can cause an unintended count transition. Use a clean gate or Schmitt-trigger stage when the clock originates in a mechanical switch, relay contact, or long cable, and provide a defined logic level to every unused CMOS input.

The CD40103BD uses a 16-lead through-hole ceramic DIP package. Match the row spacing and drill pattern of the original 16-CDIP footprint, maintain adequate clearance between adjacent row holes, and consider a socket when field replacement or upgrade is expected. Ceramic DIP packages are more susceptible to mechanical stress during soldering and insertion, so support the package and avoid forceful lead alignment against a socketed board.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The CD40103BD is identified as a military-grade Harris Corporation 16-CDIP logic counter. No current RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements were found for this ordering code, so these fields remain unknown.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

CD40103BD datasheet CD40103BD pinout CD40103BD 16-CDIP CD40103BD replacement CD40103BD equivalent CD40103BD drop-in substitute CD40103BD frequency divider CD40103BD synchronous down counter CD40103BD vs CD40103BE CD40103BD price CD40103BD stock Harris CD40103BD counter CD40103BD cross reference CD40103BD schematic CD40103BD military grade

İlgili Bileşenler ve Terimler

Harris Corporation CD40103BD CD40103B CD40103BE CD40103BM CD40103BF3A CD40103BC CD40103BP CD4000 CMOS series CMOS logic binary counter synchronous counter down counter presettable counter frequency divider 8-bit counter positive-edge clock parallel preset 16-CDIP ceramic dual-in-line package through-hole package military temperature grade logic IC digital sequence control industrial event counting
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle