Cirrus Logic Inc.

CS4220-KSR - 24-Bit Stereo Audio Codec | Cirrus Logic

MPN: CS4220-KSR ✓ Aktif
4.75 V to 5.25 V Vdss SSOP-28 Package master-slave clock negotiation Speed
MOQ: 1 |

CS4220-KSR Genel Bakış

Cirrus Logic CS4220-KSR is a 24-bit stereo audio codec with simultaneous analog-to-digital and digital-to-analog conversion, delta-sigma converter technology, a 4.75 V to 5.25 V analog supply range, and an SSOP-28 package. The codec supports sample rates from 4 kHz to 50 kHz, digital I2S audio interfaces, and an operating temperature range of -10°C to +70°C.

An audio codec is an interface IC that converts between analog audio signals and a digital audio bus. In signal-chain terms, the stereo ADC section accepts left- and right-channel analog inputs, while the stereo DAC section reconstructs digital audio as analog outputs. Within the broader hierarchy, the CS4220 is an audio codec, an interface IC, and a semiconductor designed for digital audio equipment.

The CS4220 integrates stereo 24-bit conversion on both sides of the signal path, reducing the need for separate converters in audio systems. Its 104 dB signal-to-noise figure supports professional and high-fidelity equipment, while operation up to 192 kHz accommodates high-resolution playback and recording formats. Digital I2S connectivity provides a conventional interface for digital audio processors, converters, and playback systems.

The device uses delta-sigma conversion to encode analog audio into a digital bitstream and to reconstruct that signal in the DAC section. Digital filtering, decimation, interpolation, clocking, and audio data transfer are integrated into one device. Mute control and master-slave clock negotiation add practical system controls for managing analog outputs and establishing clock relationships between audio components.

Typical uses include professional digital audio equipment, multimedia consoles, recording interfaces, digital mixers, broadcast audio subsystems, and high-fidelity playback products. The dual converter topology is especially useful when a design needs both analog capture and playback without implementing two separate converter packages. Designers should also account for analog ground, digital ground, and clock-routing requirements around the codec.

Use the manufacturer pin-description table to assign every SSOP-28 signal and preserve the recommended input, output, reference, power, and decoupling connections. Keep analog and digital return paths separated where the datasheet requires it, and validate the master clock and I2S timing against the selected system sample rate before releasing a PCB.

This page combines the CS4220-KSR technical profile, application guidance, interface considerations, and verified sourcing information in a format intended to accelerate component selection, schematic review, and PCB planning for 24-bit stereo audio systems.

Drop-in alternatifler için CS4220-KSR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

CS4220-KS

✅ Yerleştirme
📦 SSOP-28
Same CS4220 codec family, 24-bit resolution, I2S interfaces, 4 kHz to 50 kHz sample-rate range, and 28-pin SSOP outline; ordering suffix differs by 0% in the listed core parameters

📋 Katalogda Olmayan Referans Alternatifi

CS4220-KSR Maksimum Değerlendirmeler & Elektriksel Özellikler

Converter Resolution 24 bit
ADC Configuration 2 channels stereo
DAC Configuration 2 channels stereo
Conversion Architecture delta-sigma conversion
Signal-to-Noise Ratio 104 dB
Maximum Sample Rate 192 kHz
Sample Rate Range 4 kHz to 50 kHz
Analog Supply Voltage 4.75 V to 5.25 V
Digital Interface Supply Voltage 2.7 V to 5.25 V
Digital Audio Interface I2S
İşletim Sıcaklığı -10°C to +70°C
Paket SSOP-28
Montaj Türü surface mount
Mute Control supported
Clock Control master-slave clock negotiation
Power Architecture single +5 V power supply

CS4220-KSR ssop-28 Pin Yapısı Kılavuzu

CS4220-KSR (ssop-28 paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

ssop-28 paket pin çizelgesi için CS4220-KSR

Ayrıntılı pin çıkış verisi mevcut değil: CS4220-KSR.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

CS4220-KSR için uygundur 6 uygulamas: Professional Recording Interface, Digital Audio Mixing Console, High-Fidelity Digital Playback, Multimedia Audio Console, Broadcast Audio Processing, Digital Speaker and Amplifier Front End.

🎧

Professional Recording Interface

The CS4220-KSR fits a stereo recording interface because it combines a 24-bit stereo ADC and 24-bit stereo DAC in one SSOP-28 package. The ADC can capture two analog channels while the DAC supports two-channel digital monitoring, with 104 dB signal-to-noise performance suited to high-fidelity equipment. Its I2S interface connects to a digital signal processor or audio interface controller, while mute control and clock negotiation help establish a controlled signal path. The design should provide separate analog and digital supply decoupling and validate the master-clock relationship before operation.

🎛️

Digital Audio Mixing Console

The CS4220-KSR can provide analog-to-digital and digital-to-analog conversion for a digital mixing-console channel. A stereo ADC captures console inputs, while the stereo DAC returns the processed mix through an I2S connection to the console DSP. The 24-bit resolution and 104 dB signal-to-noise ratio support high-quality routing and monitoring, and sample-rate options spanning 4 kHz to 50 kHz accommodate multiple system modes. Clocking must be configured so the codec, processor, and serial interface share a coherent timing relationship.

🔊

High-Fidelity Digital Playback

The CS4220-KSR is suitable for a high-fidelity playback product that receives digital audio and drives stereo analog outputs. Its 24-bit stereo DAC path operates from an I2S source, while the 104 dB signal-to-noise ratio helps preserve low-level detail in quiet program material. Mute control provides a controlled output state during mode changes, and clock negotiation supports integration with a digital audio processor. The analog output network, reference components, grounding, and decoupling should follow the manufacturer application guidance.

🎮

Multimedia Audio Console

The CS4220-KSR can serve a multimedia console requiring both stereo capture and playback through one digital audio interface. Its integrated 24-bit ADC and DAC reduce the number of converter packages required for a compact entertainment chassis, while I2S provides a standard route to a media processor. The 4.75 V to 5.25 V analog supply range and 2.7 V to 5.25 V digital-interface range support mixed-voltage system design. Short analog traces, careful clock routing, and separate return paths are important for minimizing conversion-related interference.

📻

Broadcast Audio Processing

The CS4220-KSR can be used in broadcast audio subsystems that need a compact stereo conversion interface around a digital audio processor. The 24-bit ADC supports analog program capture, the stereo DAC supports processed playback, and the I2S interface carries serial audio between devices. A 104 dB signal-to-noise ratio is useful for preserving dynamic-range headroom, while mute control helps manage transitions. The implementation must ensure that supported sample rates, master-clock frequency, and serial timing satisfy the surrounding broadcast signal chain.

🔈

Digital Speaker and Amplifier Front End

The CS4220-KSR can form part of a digital speaker front end where a digital audio source must be converted into stereo analog signals for downstream amplification. The integrated stereo DAC provides a compact 24-bit conversion stage, while I2S connects to a digital audio transport or processor. Mute support allows the analog outputs to be placed in a controlled state during system startup or source changes. The design should preserve the required output filtering, grounding, decoupling, and clock topology from the manufacturer reference configuration.

What is the CS4220-KSR?
The CS4220-KSR is a highly integrated, 24-bit stereo audio codec with one stereo analog-to-digital converter and one stereo digital-to-analog converter. According to the Cirrus Logic CS4220 datasheet, it uses delta-sigma conversion, operates from a single +5 V supply, and is packaged in SSOP-28. It is intended for audio equipment requiring both analog capture and digital playback in one package.
What are the key specifications of CS4220-KSR that engineers should know?
The CS4220-KSR provides 24-bit stereo ADC and DAC resolution, a 104 dB signal-to-noise ratio, operation from 4.75 V to 5.25 V, and support for sample rates from 4 kHz to 50 kHz. According to the Cirrus Logic CS4220 datasheet, the device also supports I2S digital audio, mute control, master-slave clock negotiation, and a maximum listed sample rate of 192 kHz.
Where can I download the CS4220-KSR datasheet PDF?
The CS4220-KSR datasheet PDF can be opened through the Cirrus Logic CS4220 document link listed on this page. The document describes the converter architecture, SSOP-28 connections, electrical limits, digital audio interface, clocking, and typical applications. Use the manufacturer pin-description table when assigning PCB nets and selecting the external analog and digital support components.
Where can I find the CS4220-KSR pinout?
The CS4220-KSR pinout is defined in the Cirrus Logic CS4220 datasheet under the SSOP-28 pin-description section. The pin list identifies analog inputs, analog outputs, digital audio signals, clocks, power, ground, mute, and control connections. Assign PCB tracks from that table rather than inferring connections from an unverified diagram, and preserve the package orientation shown on the device.
What sample rates and audio formats does CS4220-KSR support?
The CS4220-KSR supports 24-bit stereo audio and an I2S digital interface, with listed sample-rate coverage from 4 kHz to 50 kHz and a maximum supported rate of 192 kHz. According to the Cirrus Logic CS4220 datasheet, the converter uses delta-sigma techniques. The system clock and I2S timing must be configured consistently for the selected recording or playback rate.
What supply voltage does the CS4220-KSR require?
The CS4220-KSR uses a 4.75 V to 5.25 V analog supply and a 2.7 V to 5.25 V digital-interface supply range. According to the Cirrus Logic CS4220 datasheet, the codec operates from a single +5 V power architecture with separate interface compatibility. Place the required bypass capacitors near the supply pins and follow the datasheet layout for analog, digital, and ground connections.
Is the CS4220-KSR suitable for professional audio equipment?
The CS4220-KSR is suitable for professional and high-fidelity audio applications that need integrated stereo conversion. Its 24-bit resolution, 104 dB signal-to-noise ratio, stereo ADC and DAC channels, and digital audio interface support requirements described in the Cirrus Logic CS4220 datasheet. The SSOP-28 package also allows the converter functions to be consolidated in compact equipment designs.
What can replace the CS4220-KSR?
A valid replacement for the CS4220-KSR must match the SSOP-28 footprint, preserve pin-to-pin signal assignments, and maintain compatible converter resolution, channel count, clocking, supply, and digital-audio-interface requirements. No confirmed drop-in substitute is identified for this part. Use the Request a Quote form on this page to discuss sourcing or replacement requirements with the engineering team.
Is CS4220-KSR the same as CS4223-KSR?
No. The CS4223-KSR belongs to the related Cirrus Logic codec family, but a shared family name does not establish pin-to-pin compatibility with the CS4220-KSR. Converter channel configuration, clock behavior, control functions, and package assignments must be compared in the manufacturer datasheets. Do not substitute CS4223-KSR without completing a signal-by-signal and schematic-level compatibility review.
CS4220-KSR vs CS4223-KSR: which is better for a stereo recording interface?
The CS4220-KSR is the directly applicable choice for a design requiring one stereo ADC and one stereo DAC using the documented CS4220 architecture. The CS4223-KSR may provide different family-level channel or resource configurations and therefore may not be pin-compatible. The correct selection depends on matching the converter channels, I2S wiring, clocking, supplies, and SSOP-28 pin assignments to the target schematic.
When should I choose CS4220-KSR over a multi-converter audio design?
Choose the CS4220-KSR when a design needs one stereo analog input and one stereo analog output plus an I2S digital audio path. Integrating both converter directions in one SSOP-28 device can reduce board area and simplify synchronization compared with separate ADC and DAC packages. The tradeoff is that the fixed CS4220 channel architecture may not satisfy designs requiring more inputs, outputs, or different converter formats.
Is CS4220-KSR suitable for a digital mixing console application?
The CS4220-KSR can fit a digital mixing-console channel that requires stereo analog capture and playback around a digital audio processor. Its I2S interface, mute control, and clock negotiation features support integration with digital mixing architectures. Designers must verify the required sample rate, clock topology, channel count, and latency requirements before using the codec in each console signal path.
Where to buy CS4220-KSR online?
Use the Request a Quote form on this page to request current CS4220-KSR pricing, stock confirmation, minimum order quantity, and lead time. The form allows you to specify the required quantity and packaging while keeping the inquiry tied to the exact SSOP-28 manufacturer part number. This avoids ambiguity with related CS4220 family variants or different reel and temperature designations.
What is the price of CS4220-KSR?
Request the current CS4220-KSR price through the Request a Quote form on this page. Quote responses should identify the exact CS4220-KSR manufacturer part number, order quantity, package, and shipping requirements. The structured pricing panel is intended to remain synchronized with commercial availability, so buyers should use the quote form for a transaction-ready price.
What is the lead time and stock status for CS4220-KSR?
Current stock, minimum order quantity, and lead time for CS4220-KSR should be requested through the Request a Quote form on this page. Include your production forecast, required quantity, and target date so the sourcing team can confirm the appropriate schedule. The component is listed as an active audio interface IC, but order-specific availability should always be confirmed before procurement.

Mühendislik referans verileri: CS4220-KSR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the CS4220-KSR for compact stereo audio designs that need both 24-bit analog capture and playback, an I2S digital audio path, and operation from a single +5 V supply architecture. Its integrated ADC and DAC simplify signal-chain partitioning and reduce the number of converter packages on the PCB. The SSOP-28 format is useful where moderate package size is acceptable. Do not select the related CS4223-KSR as a direct substitute without confirming pin assignments and channel configuration, and do not assume a generic codec is drop-in compatible because converter resolution and interface format match. For designs requiring more than two analog inputs or outputs, different digital interfaces, lower latency, or a smaller package, evaluate other codec architectures against the complete electrical and pin-level requirements.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Brand Cirrus Logic
Package SSOP-28
Product Type Stereo audio codec
Converter Resolution 24 bit
ADC Channels 2 channels stereo
DAC Channels 2 channels stereo
Analog Supply Voltage 4.75 V to 5.25 V
Digital Interface Supply Voltage 2.7 V to 5.25 V
Sample Rate Range 4 kHz to 50 kHz
Maximum Sample Rate 192 kHz
Signal-to-Noise Ratio 104 dB
Digital Audio Interface I2S
Operating Temperature -10°C to +70°C

Ana Farklılayıcılar

  • Integrated bidirectional stereo conversion (karşılaştırma:Separate ADC and DAC packages)
  • Digital audio connectivity and system control (karşılaştırma:Basic parallel-interface codec designs)
  • High-resolution noise performance (karşılaştırma:Lower-resolution audio converter designs)

Tasarım Notları

Keep the SSOP-28 power and ground connections close to their corresponding bypass capacitors, and route analog input and output signals away from I2S data and clock traces. The CS4220-KSR contains sensitive conversion circuitry, so short return paths and a clean analog ground region can reduce coupling between digital switching activity and the stereo analog channels.

Route the I2S serial data and clock as a controlled group and confirm setup and hold timing at the connected digital audio device. Master-slave clock negotiation is available, but the selected operating mode must still match the clock architecture of the system. Avoid adding unnecessary stubs or long parallel routes between the codec and the digital audio processor.

Decouple the analog and digital supply domains at the device pins and follow the capacitance and placement guidance in the manufacturer datasheet. The codec specifies a 4.75 V to 5.25 V analog supply and a 2.7 V to 5.25 V digital-interface range. Check startup sequencing and rail tolerances at the system level rather than assuming every connected device shares identical supply requirements.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

A distributor listing identifies the part as RoHS, but no formal compliance declaration is identified. Confirm the applicable RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation during procurement qualification.

Veri doğrulanma tarihi: 2026-11-10 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

cs4220 datasheet cs4220 16gt 135 pdf cs4220 16gt 240 dahua CS4220-KSR datasheet CS4220-KSR pinout CS4220-KSR equivalent CS4220-KSR replacement CS4220-KSR price CS4220-KSR stock Cirrus Logic CS4220-KSR CS4220-KSR SSOP-28 pinout CS4220-KSR stereo audio codec

İlgili Bileşenler ve Terimler

Cirrus Logic CS4220-KSR CS4220 CS4223-KSR 24-bit audio codec stereo ADC stereo DAC delta-sigma converter audio interface IC I2S SSOP-28 surface mount package digital audio signal-to-noise ratio 104 dB 192 kHz sample rate mute control master-slave clock negotiation single +5 V power supply analog-to-digital conversion digital-to-analog conversion
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle