CS4220-KSR - 24-Bit Stereo Audio Codec | Cirrus Logic
MPN: CS4220-KSR ✓ 啟用中CS4220-KSR 概覽
An audio codec is an interface IC that converts between analog audio signals and a digital audio bus. In signal-chain terms, the stereo ADC section accepts left- and right-channel analog inputs, while the stereo DAC section reconstructs digital audio as analog outputs. Within the broader hierarchy, the CS4220 is an audio codec, an interface IC, and a semiconductor designed for digital audio equipment.
The CS4220 integrates stereo 24-bit conversion on both sides of the signal path, reducing the need for separate converters in audio systems. Its 104 dB signal-to-noise figure supports professional and high-fidelity equipment, while operation up to 192 kHz accommodates high-resolution playback and recording formats. Digital I2S connectivity provides a conventional interface for digital audio processors, converters, and playback systems.
The device uses delta-sigma conversion to encode analog audio into a digital bitstream and to reconstruct that signal in the DAC section. Digital filtering, decimation, interpolation, clocking, and audio data transfer are integrated into one device. Mute control and master-slave clock negotiation add practical system controls for managing analog outputs and establishing clock relationships between audio components.
Typical uses include professional digital audio equipment, multimedia consoles, recording interfaces, digital mixers, broadcast audio subsystems, and high-fidelity playback products. The dual converter topology is especially useful when a design needs both analog capture and playback without implementing two separate converter packages. Designers should also account for analog ground, digital ground, and clock-routing requirements around the codec.
Use the manufacturer pin-description table to assign every SSOP-28 signal and preserve the recommended input, output, reference, power, and decoupling connections. Keep analog and digital return paths separated where the datasheet requires it, and validate the master clock and I2S timing against the selected system sample rate before releasing a PCB.
This page combines the CS4220-KSR technical profile, application guidance, interface considerations, and verified sourcing information in a format intended to accelerate component selection, schematic review, and PCB planning for 24-bit stereo audio systems.
直接替換替代品,適用於 CS4220-KSR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
CS4220-KS
✅ 直接替換📋 參考替代品(不在目錄中)
CS4220-KSR 最大額定值與電氣特性
| Converter Resolution | 24 bit |
| ADC Configuration | 2 channels stereo |
| DAC Configuration | 2 channels stereo |
| Conversion Architecture | delta-sigma conversion |
| Signal-to-Noise Ratio | 104 dB |
| Maximum Sample Rate | 192 kHz |
| Sample Rate Range | 4 kHz to 50 kHz |
| Analog Supply Voltage | 4.75 V to 5.25 V |
| Digital Interface Supply Voltage | 2.7 V to 5.25 V |
| Digital Audio Interface | I2S |
| 工作溫度 | -10°C to +70°C |
| 封裝 | SSOP-28 |
| 安裝類型 | surface mount |
| Mute Control | supported |
| Clock Control | master-slave clock negotiation |
| Power Architecture | single +5 V power supply |
CS4220-KSR ssop-28 腳位配置指南
CS4220-KSR(ssop-28 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: CS4220-KSR.
請參閱 資料表 以查看完整腳位配置。
典型應用
CS4220-KSR 適用於 6 應用s: Professional Recording Interface, Digital Audio Mixing Console, High-Fidelity Digital Playback, Multimedia Audio Console, Broadcast Audio Processing, Digital Speaker and Amplifier Front End.
Professional Recording Interface
The CS4220-KSR fits a stereo recording interface because it combines a 24-bit stereo ADC and 24-bit stereo DAC in one SSOP-28 package. The ADC can capture two analog channels while the DAC supports two-channel digital monitoring, with 104 dB signal-to-noise performance suited to high-fidelity equipment. Its I2S interface connects to a digital signal processor or audio interface controller, while mute control and clock negotiation help establish a controlled signal path. The design should provide separate analog and digital supply decoupling and validate the master-clock relationship before operation.
推薦
Digital Audio Mixing Console
The CS4220-KSR can provide analog-to-digital and digital-to-analog conversion for a digital mixing-console channel. A stereo ADC captures console inputs, while the stereo DAC returns the processed mix through an I2S connection to the console DSP. The 24-bit resolution and 104 dB signal-to-noise ratio support high-quality routing and monitoring, and sample-rate options spanning 4 kHz to 50 kHz accommodate multiple system modes. Clocking must be configured so the codec, processor, and serial interface share a coherent timing relationship.
推薦
High-Fidelity Digital Playback
The CS4220-KSR is suitable for a high-fidelity playback product that receives digital audio and drives stereo analog outputs. Its 24-bit stereo DAC path operates from an I2S source, while the 104 dB signal-to-noise ratio helps preserve low-level detail in quiet program material. Mute control provides a controlled output state during mode changes, and clock negotiation supports integration with a digital audio processor. The analog output network, reference components, grounding, and decoupling should follow the manufacturer application guidance.
推薦
Multimedia Audio Console
The CS4220-KSR can serve a multimedia console requiring both stereo capture and playback through one digital audio interface. Its integrated 24-bit ADC and DAC reduce the number of converter packages required for a compact entertainment chassis, while I2S provides a standard route to a media processor. The 4.75 V to 5.25 V analog supply range and 2.7 V to 5.25 V digital-interface range support mixed-voltage system design. Short analog traces, careful clock routing, and separate return paths are important for minimizing conversion-related interference.
推薦
Broadcast Audio Processing
The CS4220-KSR can be used in broadcast audio subsystems that need a compact stereo conversion interface around a digital audio processor. The 24-bit ADC supports analog program capture, the stereo DAC supports processed playback, and the I2S interface carries serial audio between devices. A 104 dB signal-to-noise ratio is useful for preserving dynamic-range headroom, while mute control helps manage transitions. The implementation must ensure that supported sample rates, master-clock frequency, and serial timing satisfy the surrounding broadcast signal chain.
推薦
Digital Speaker and Amplifier Front End
The CS4220-KSR can form part of a digital speaker front end where a digital audio source must be converted into stereo analog signals for downstream amplification. The integrated stereo DAC provides a compact 24-bit conversion stage, while I2S connects to a digital audio transport or processor. Mute support allows the analog outputs to be placed in a controlled state during system startup or source changes. The design should preserve the required output filtering, grounding, decoupling, and clock topology from the manufacturer reference configuration.
推薦
工程參考資料,適用於 CS4220-KSR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Cirrus Logic |
| Package | SSOP-28 |
| Product Type | Stereo audio codec |
| Converter Resolution | 24 bit |
| ADC Channels | 2 channels stereo |
| DAC Channels | 2 channels stereo |
| Analog Supply Voltage | 4.75 V to 5.25 V |
| Digital Interface Supply Voltage | 2.7 V to 5.25 V |
| Sample Rate Range | 4 kHz to 50 kHz |
| Maximum Sample Rate | 192 kHz |
| Signal-to-Noise Ratio | 104 dB |
| Digital Audio Interface | I2S |
| Operating Temperature | -10°C to +70°C |
主要差異化特點
- Integrated bidirectional stereo conversion (對比Separate ADC and DAC packages)
- Digital audio connectivity and system control (對比Basic parallel-interface codec designs)
- High-resolution noise performance (對比Lower-resolution audio converter designs)
設計說明
Keep the SSOP-28 power and ground connections close to their corresponding bypass capacitors, and route analog input and output signals away from I2S data and clock traces. The CS4220-KSR contains sensitive conversion circuitry, so short return paths and a clean analog ground region can reduce coupling between digital switching activity and the stereo analog channels.
Route the I2S serial data and clock as a controlled group and confirm setup and hold timing at the connected digital audio device. Master-slave clock negotiation is available, but the selected operating mode must still match the clock architecture of the system. Avoid adding unnecessary stubs or long parallel routes between the codec and the digital audio processor.
Decouple the analog and digital supply domains at the device pins and follow the capacitance and placement guidance in the manufacturer datasheet. The codec specifies a 4.75 V to 5.25 V analog supply and a 2.7 V to 5.25 V digital-interface range. Check startup sequencing and rail tolerances at the system level rather than assuming every connected device shares identical supply requirements.
合規資訊
A distributor listing identifies the part as RoHS, but no formal compliance declaration is identified. Confirm the applicable RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation during procurement qualification.