Infineon

CY8C3445LTI-086 - 50MHz 8051 MCU | Infineon Technologies

MPN: CY8C3445LTI-086 ✓ Aktif
1.71 V to 5.5 V Vdss 68-VFQFN (8 mm x 8 mm) Package 50 MHz Speed 32 KB Memory
MOQ: 1 |

CY8C3445LTI-086 Genel Bakış

The Infineon Technologies CY8C3445LTI-086 is an 8-bit 8051-compatible PSoC 3 microcontroller operating at up to 50 MHz, with 32 KB of flash memory and a 1.71 V to 5.5 V supply range. It is housed in a 68-VFQFN package measuring 8 mm by 8 mm and incorporating an exposed pad. These parameters position the device as a compact embedded-control component for applications requiring deterministic peripheral control and moderate flash capacity.

A microcontroller is a programmable semiconductor that integrates a processing core, memory, and peripherals into one device. The 8051 architecture is an established 8-bit embedded-control platform, while PSoC 3 expands the concept with programmable resources alongside conventional digital control. Within the broader semiconductor hierarchy, this device belongs to the MCU and embedded-controller category rather than a general-purpose microprocessor or DSP.

The principal features visible in the manufacturer datasheet are the 50 MHz operating frequency, 32 KB flash memory organized as 32K by 8 bits, and broad 1.71 V to 5.5 V operating-voltage range. The 68-VFQFN package uses an exposed pad to support heat transfer from the device to the PCB. These characteristics make the MCU suitable for compact control boards, human-interface controllers, and embedded systems that need an 8-bit processor without a large external memory array.

The CY8C3445LTI-086 belongs to the CY8C34xx microcontroller group, identified in the part description as an 8051 PSoC 3 device. Its flash-based program memory supports firmware storage in the same package as the controller. The exposed-pad construction is especially relevant in compact industrial and consumer products because thermal performance depends on the PCB copper area and solder mask layout rather than on a separate heatsink.

Typical application areas include industrial keypad and panel controls, compact sensor-hub controllers, appliance interface boards, LED control systems, and general embedded automation modules. The 50 MHz clock rate provides useful headroom for interrupt-driven control and peripheral coordination, while the 32 KB flash capacity is suitable for moderate firmware sizes. Designers should confirm peripheral availability, pin multiplexing, memory-map behavior, and programming requirements against the exact datasheet before releasing a PCB.

Layout planning should prioritize a continuous ground plane, short return paths for high-frequency signals, and adequate copper beneath the exposed pad. Input and output traces connected to external sensors or actuators should be kept away from sensitive clock and programming nets. Firmware development also depends on the supported programming and debug interface, so schedule device configuration, boot behavior, and peripheral initialization early in the design cycle.

This page consolidates the device identity, package information, technical specifications, sourcing guidance, compatible family options, and practical design considerations into one engineering reference. It also distinguishes documented parameters from items that require confirmation with the Infineon datasheet, helping designers identify PCB and firmware decisions that must be validated before production.

Drop-in alternatifler için CY8C3445LTI-086 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller CY8C3445LTI-086 (aynı form faktörü ve ayağa oturma) — farklı olan Package, Product Type.

Infineon
Package: 68-QFN (8 x 8 mm)
Product Type: 8-bit PSoC 3 flash programmable system-on-chip microcontroller
İle Karşılaştır CY8C3445LTI-086 →

CY8C3445LTI-081

✅ Yerleştirme
Infineon
📦 68-VFQFN
8-bit PSoC 3 flash programmable system-on-chip microcontroller · 8051 · 50 MHz · 32 KB · 32K x 8 bits · 4 KB · 1 KB · 8 KB

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

CY8C3445LTI-079

✅ Yerleştirme
📦 68-VFQFN
Same 8051 PSoC 3 family and 68-VFQFN package; suffix-specific maximum clock and characterization differ by up to the documented family limits, which require confirmation.

📋 Katalogda Olmayan Referans Alternatifi

CY8C3445LTI-086 Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 8-bit microcontroller
Processor Architecture 8051
Product Family CY8C34xx PSoC 3
Azami Saat Hızı 50 MHz
Flash Memory Size 32 KB
Flash Memory Organization 32K x 8 bits
Operating Voltage Range 1.71 V to 5.5 V
Paket 68-VFQFN (8 mm x 8 mm)
Thermal Pad Exposed pad
Montaj Türü Surface mount

CY8C3445LTI-086 68-vfqfn (8 mm x 8 mm) Pin Yapısı Kılavuzu

CY8C3445LTI-086 (68-vfqfn (8 mm x 8 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

68-vfqfn (8 mm x 8 mm) paket pin çizelgesi için CY8C3445LTI-086

Ayrıntılı pin çıkış verisi mevcut değil: CY8C3445LTI-086.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

CY8C3445LTI-086 için uygundur 6 uygulamas: Industrial Keypad and Panel Control, Compact Sensor Hub Controller, Appliance Interface Controller, LED Lighting Control, Battery-Powered Monitoring Node, General Embedded Automation Module.

🏭

Industrial Keypad and Panel Control

The CY8C3445LTI-086 fits compact industrial keypad and panel controllers because it combines a 50 MHz 8051-compatible core with 32 KB of on-chip flash and a 1.71 V to 5.5 V operating range. The microcontroller can execute scanning, debouncing, illumination control, and communication firmware in one device. Its 68-VFQFN package also leaves more board area available for connectors and power conditioning than a larger leaded package. Use the exposed pad as a thermal and ground path according to the manufacturer layout guidance. Final selection should confirm the LTI temperature limits, applicable peripheral resources, and pin multiplexing for the intended panel interface.

🧩

Compact Sensor Hub Controller

The CY8C3445LTI-086 is suitable for a compact sensor hub that must acquire, filter, and forward measurements from several sensors. Its 50 MHz maximum clock provides timing margin for interrupt-driven sampling and protocol handling, while 32 KB of flash provides room for configuration data and embedded firmware. The 1.71 V to 5.5 V supply range permits integration with compatible low-voltage sensor interfaces. Place the MCU and its supporting passive components close together to limit susceptibility to noise on measurement inputs. The engineer must also verify the exact ADC, comparator, timer, and communication resources before assigning sensors to specific pins.

⚡

Appliance Interface Controller

The CY8C3445LTI-086 can serve as the local controller in an appliance interface board that coordinates buttons, indicators, relays, and a communications link. Its 8051-compatible architecture supports straightforward event-driven firmware, and the 32 KB flash capacity is appropriate for moderate control code without an external program-memory device. Operating from 1.71 V to 5.5 V provides design flexibility for mixed-voltage power trees. Keep relay-driver traces separated from sensitive control signals and provide the required protection against inductive transients. Confirm that the selected suffix supports the appliance's ambient temperature and that every used peripheral is available in the exact device configuration.

💡

LED Lighting Control

The CY8C3445LTI-086 is applicable to LED lighting controllers that require deterministic timing, local effect storage, and user-interface handling. Its 50 MHz maximum clock allows software PWM and communication routines to coexist, while 32 KB of flash can store lighting scenes, calibration tables, and control logic. The compact 68-VFQFN footprint supports space-constrained luminaires, although continuous current loading should be kept outside the MCU package where possible. Use exposed-pad copper to improve thermal transfer and follow the manufacturer's recommended stack-up and land pattern. Verify the exact PWM-capable outputs, timing channels, and maximum operating limits before finalizing the LED board.

🔋

Battery-Powered Monitoring Node

The CY8C3445LTI-086 can support a small monitoring node when the design can operate within its documented 1.71 V to 5.5 V range and relies on periodic wake-up behavior. The 50 MHz maximum clock allows the firmware to complete sensor sampling and data packing quickly, reducing the portion of time the processor remains active. Its 32 KB flash stores application code and calibration information without an external memory package. Battery designs should still evaluate every peripheral's sleep behavior, regulator quiescent current, and wake-up timing. Select the correct power architecture and use the exposed pad to maintain stable junction temperature under the enclosure's thermal conditions.

🔧

General Embedded Automation Module

The CY8C3445LTI-086 works well as the central controller in a general embedded automation module combining digital inputs, outputs, status indicators, and a host interface. Its 50 MHz 8051-compatible processing core is suitable for deterministic control loops, and 32 KB of flash provides sufficient capacity for a compact application without external storage. The 68-VFQFN package reduces board footprint but requires careful land-pattern and reflow control. Use a continuous ground reference, route fast interfaces away from exposed connector edges, and validate the exposed-pad thermal design under maximum processor activity. Peripheral assignment and interrupt priorities must be checked against the device's pin multiplexing and electrical limits.

What is the CY8C3445LTI-086?
The CY8C3445LTI-086 is an 8-bit Infineon Technologies PSoC 3 microcontroller built around the 8051 architecture. According to the Infineon datasheet, it operates at up to 50 MHz, contains 32 KB of flash memory, and is packaged in a 68-VFQFN with an exposed pad. It is intended for embedded control applications that need local firmware storage and a compact surface-mount footprint.
What is the operating voltage range of CY8C3445LTI-086?
The CY8C3445LTI-086 operates from 1.71 V to 5.5 V. According to the Infineon datasheet, this range supports low-voltage embedded systems while also allowing operation from a conventional 5 V supply after appropriate regulation or filtering. Confirm the selected regulator's tolerance, startup behavior, and decoupling requirements against the device's recommended operating conditions before PCB release.
How much flash memory does CY8C3445LTI-086 contain?
The CY8C3445LTI-086 contains 32 KB of flash memory organized as 32K by 8 bits. According to the Infineon datasheet, this embedded program memory supports firmware storage without a separate external memory device. The usable code area can be affected by boot code, configuration data, and reserved regions, so the device-selection tool should be used to confirm the final memory map.
What package and size are used for CY8C3445LTI-086?
The CY8C3445LTI-086 uses a 68-VFQFN package measuring 8 mm by 8 mm, with an exposed pad. The Infineon datasheet identifies the package as 68-VFQFN, while the distributor product description also identifies the exposed-pad construction. The pad should be connected to the recommended ground and thermal-copper arrangement shown in the manufacturer's land-pattern guidance.
Where can I download the CY8C3445LTI-086 datasheet PDF?
The CY8C3445LTI-086 datasheet can be reached through the Infineon/Cypress octopart datasheet page or through the manufacturer product documentation linked from the device listing. According to the datasheet, the part is an 8051 PSoC 3 with 32 KB of flash, a 50 MHz maximum clock, and a 1.71 V to 5.5 V supply range. Use the manufacturer document for authoritative pin, peripheral, and electrical details.
Where can I find the CY8C3445LTI-086 pinout?
The CY8C3445LTI-086 pinout is found in the pin-description table and package drawing of the Infineon datasheet. The device uses 68 VQFN leads plus an exposed pad, and its exact signal assignments must be taken from that table rather than inferred from the 8051 architecture. When assigning PCB tracks, also check the recommended land pattern and exposed-pad connection in the same documentation.
What can replace the CY8C3445LTI-086?
The closest identified replacements are the pin-compatible CY8C3445LTI-081 and CY8C3445LTI-081-family alternatives, subject to device-specific speed, temperature, and qualification checks. The documented alternatives belong to the same CY8C3445LTI family and 68-VFQFN package, but suffix changes can alter device characteristics. Request a Quote on this page for availability and use the Request a Quote form to confirm an exact replacement.
Is CY8C3445LTI-081 a drop-in replacement for CY8C3445LTI-086?
CY8C3445LTI-081 is a same-family candidate for CY8C3445LTI-086 because both use the LTI package designation, but firmware and hardware equivalence must be confirmed from the manufacturer ordering tables. The suffix may change operating limits or device characterization, so a drop-in decision should cover clock rate, temperature range, memory, peripheral configuration, qualification, and package land pattern. Do not substitute solely from the family name.
CY8C3445LTI-086 vs CY8C3445LTI-079: which should be selected?
The CY8C3445LTI-086 is the preferred choice when the design specifically requires the documented 50 MHz maximum operating frequency, while CY8C3445LTI-079 should be selected only after its suffix-specific limits are verified. According to the Infineon family documentation, both are 8051 PSoC 3 devices with 32 KB flash, but the ordering suffix can affect device characterization. Compare the exact suffix rows before making a substitution.
When should I choose CY8C3445LTI-086 over a lower-speed family option?
Choose CY8C3445LTI-086 when the firmware and timing plan benefit from its documented 50 MHz maximum clock while retaining 8-bit 8051 software compatibility. The 32 KB flash capacity and 1.71 V to 5.5 V range suit compact control platforms, but higher clock speed can increase switching activity and power demand. Select a lower-speed option when the computed timing margin is already adequate and lower switching requirements dominate.
Is CY8C3445LTI-086 suitable for industrial control applications?
The CY8C3445LTI-086 can be evaluated for industrial control because it combines an 8051 core, 32 KB flash, and a 50 MHz maximum clock in a compact 68-VFQFN package. The LTI ordering code suggests an industrial temperature grade, but the operating-temperature limits and qualification status must be confirmed in the Infineon ordering information. Confirm those limits against the application's ambient and enclosure conditions.
How do I buy CY8C3445LTI-086 and check stock?
Use the Request a Quote form on this page to request CY8C3445LTI-086 pricing, current availability, lead time, and order quantities. The device is listed in distribution channels as an Infineon Technologies 8-bit MCU with 32 KB flash, a 50 MHz clock, and a 1.71 V to 5.5 V operating range. Provide the required package suffix and quantity in the quote request to avoid an incorrect order configuration.
What is the price of CY8C3445LTI-086?
Current CY8C3445LTI-086 pricing is obtained through the Request a Quote form on this page rather than through a static listing on the product page. The request should include the quantity, target delivery date, and required shipping destination. The part is identified in the manufacturer distribution records as a 32 KB flash, 50 MHz, 68-VFQFN microcontroller, so quote confirmation should preserve that exact package suffix.
What is the lead time for CY8C3445LTI-086?
Request the current CY8C3445LTI-086 lead time through the Request a Quote form on this page. Lead time can change with order quantity, packaging configuration, and current manufacturing conditions, so a historical delivery range should not be treated as a firm commitment. Include your required delivery date and annual usage profile in the request to obtain a more useful production schedule.
Is CY8C3445LTI-086 currently in stock?
Current CY8C3445LTI-086 inventory should be confirmed through the Request a Quote form on this page. One distributor listing reports an inventory quantity of 3,920 pieces, but that snapshot can change independently of this product page. Use the quote request to verify live stock, traceability requirements, and the quantity available for your production schedule.
What are the key CY8C3445LTI-086 specifications engineers should know?
The key CY8C3445LTI-086 specifications are a 50 MHz maximum clock, 8-bit 8051 architecture, 32 KB flash organized as 32K by 8 bits, and a 1.71 V to 5.5 V operating range. According to the Infineon datasheet, the device is an 8-bit PSoC 3 microcontroller in a 68-VFQFN package measuring 8 mm by 8 mm with an exposed pad. These are the principal architecture, memory, timing, power, and package-selection parameters.
Which programming tool supports CY8C3445LTI-086?
The CY8C3445LTI-086 is supported by programming systems that include Cypress/Infineon PSoC 3 devices in their device database. The Elnec device-programming listing identifies CY8C3445LTI-086 as an ISP programming target. Before selecting a production programmer, confirm the adapter, package, security configuration, programming voltage, and factory-programming requirements against the device programming documentation.
Does CY8C3445LTI-086 meet RoHS, REACH, or AEC-Q100 requirements?
The CY8C3445LTI-086's RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status must be taken from the current Infineon material-declaration records for this exact ordering code. The technical part description confirms the MCU architecture, memory, voltage range, frequency, and package, but it does not establish every environmental declaration. Request the current compliance documentation before using the device in a regulated production design.

Mühendislik referans verileri: CY8C3445LTI-086 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose CY8C3445LTI-086 when a compact 8-bit control system benefits from a documented 50 MHz maximum clock, 32 KB of embedded flash, and operation across 1.71 V to 5.5 V. It is especially suitable for panel controls, sensor hubs, appliance interfaces, LED controllers, and general automation modules where the 8051 architecture reduces firmware complexity. CY8C3445LTI-081 is a same-family candidate when its suffix-specific clock, temperature, and qualification characteristics meet the design. Consider CY8C3445LTI-079 when its ordering characteristics satisfy the system and the lower performance limit is acceptable. For every candidate, verify the 68-VFQFN land pattern, exposed-pad connection, programming procedure, peripheral availability, and operating-temperature limits. A package-compatible alternative should not be approved until its ordering row and device configuration have been checked against the production firmware.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün CY8C3445LTI-081 CY8C3445LTI-079
Brand Infineon Technologies Infineon Technologies Infineon Technologies
Package 68-VFQFN (8 mm x 8 mm) 68-VFQFN 68-VFQFN
Processor Architecture 8-bit 8051 8-bit 8051 8-bit 8051
Product Family CY8C34xx PSoC 3 CY8C34xx PSoC 3 CY8C34xx PSoC 3
Flash Memory Size 32 KB 32 KB 32 KB
Exposed Pad Yes Yes Yes

Ana Farklılayıcılar

  • Higher documented clock capability within the same LTI family (karşılaştırma:CY8C3445LTI-081)
  • Established 8051 software compatibility and integrated flash (karşılaştırma:CY8C3445LTI-079)
  • Compact exposed-pad package supports dense embedded boards (karşılaştırma:CY8C3445LTI-081)

Tasarım Notları

Treat the 68-VFQFN exposed pad as a thermal and electrical land rather than as an optional copper feature. Place it over a continuous ground plane according to the Infineon package guidance, minimize thermal interruptions beneath the pad, and use the maximum PCB copper area allowed by the board construction. Validate junction temperature with the actual enclosure, airflow, switching activity, and ambient conditions because the processor's 50 MHz operation can make clock-related power dissipation more significant than the standby load.

Use the manufacturer's land pattern and pin-description table when assigning all 68 VQFN leads and the exposed pad. Keep programming signals, clock routing, and sensitive inputs away from noisy external connectors. Place decoupling capacitors at the supply pins with short, low-loop ground returns, and avoid routing fast or switching nodes beneath the exposed-pad area. A conventional QFN footprint must not be assumed without checking body size, lead pitch, pad dimensions, and exposed-pad construction.

Do not assume that every CY8C3445LTI suffix is electrically interchangeable. Confirm the ordering table for clock rate, temperature grade, qualification, flash configuration, and any device-specific limitations before substituting CY8C3445LTI-081 or CY8C3445LTI-079. Also verify the programming voltage, boot configuration, security settings, and ISP sequence. A mechanically matching package alone does not establish that existing firmware and production-test procedures remain unchanged.

Design the supply path for the documented 1.71 V to 5.5 V operating range and ensure transient control at every operating condition. Place bulk and local ceramic decoupling according to the datasheet recommendations, use a quiet source for sensitive measurement circuits, and characterize startup in the complete power tree. Because the device supports clock frequencies up to 50 MHz, verify that regulator bandwidth and supply ripple remain acceptable for the enabled clock and analog peripherals.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The current manufacturer material-declaration records for this exact ordering code must be reviewed before making a compliance claim. AEC-Q100 is recorded as not applicable because the part description does not identify it as an automotive-qualified variant.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

CY8C3445LTI-086 datasheet CY8C3445LTI-086 pinout CY8C3445LTI-086 datasheet pdf Infineon CY8C3445LTI-086 CY8C3445LTI-086 50MHz microcontroller CY8C3445LTI-086 32KB flash CY8C3445LTI-086 68-VFQFN CY8C3445LTI-086 equivalent CY8C3445LTI-086 replacement CY8C3445LTI-086 vs CY8C3445LTI-081 CY8C3445LTI-086 price CY8C3445LTI-086 stock

İlgili Bileşenler ve Terimler

Infineon Technologies CY8C3445LTI-086 CY8C3445LTI-081 CY8C3445LTI-079 8051 architecture 8-bit microcontroller PSoC 3 CY8C34xx embedded controller system-on-chip semiconductor 32 KB flash memory 50 MHz clock 1.71 V to 5.5 V operating voltage 68-VFQFN QFN package family surface-mount package exposed pad ISP programming industrial control sensor hub LED lighting control battery-powered monitoring embedded automation
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle