Analog Devices

DG409CY+T - Dual 4:1 CMOS Analog Multiplexer | Analog Devices

MPN: DG409CY+T ✓ Aktif
100 ohm maximum Rds(on) 16-pin narrow SOIC Package
MOQ: 1 |

DG409CY+T Genel Bakış

The Analog Devices DG409CY+T is an improved dual 4:1 CMOS analog multiplexer with two independently selectable switch functions, 100 ohm maximum on-resistance, and bidirectional signal conduction. The device is packaged in a 16-pin narrow SOIC and is intended for analog signal routing in test equipment, instrumentation, communication systems, and data-acquisition systems.

A CMOS analog multiplexer is an electronic switching network that connects one common terminal to one of several input terminals. Its hierarchy is analog switch, multiplexer or demultiplexer, interface IC, and integrated circuit. By applying binary select signals, the DG409 routes analog signals among multiple sources while presenting a compact alternative to discrete relays or multiple analog switches. Bidirectional operation allows the same device to work as either a multiplexer or a demultiplexer.

The improved DG409 family provides guaranteed channel matching of 8 ohms maximum and on-resistance flatness of 9 ohms maximum across the specified signal range. Its maximum on-resistance is 100 ohms, while maximum charge injection is 15 pC. These characteristics make the DG409CY+T appropriate for instrumentation where channel-to-channel resistance consistency, signal fidelity, and low switching disturbance are more important than very low resistance alone.

The DG409 family uses CMOS technology and supports two 4:1 switching functions. Low input off-leakage of less than 5 nA at 85 degrees Celsius helps preserve the state of high-impedance nodes between selections. The device can also be used as a demultiplexer because every switch path conducts equally well in either direction. Its dual architecture allows one multiplexed signal and one demultiplexed signal, or two multiplexed functions, to be handled in one package.

Typical uses include routing sensor outputs into an analog-to-digital converter, selecting external test stimuli for automated test equipment, connecting instrumentation channels, and implementing communication-signal path selection. The DG409CY+T is especially appropriate where a compact 16-pin surface-mount package, bidirectional conduction, and controlled channel matching are desired. The industrial-temperature ordering information should be checked against the exact suffix and datasheet ordering table.

PCB design requires care because analog switches inject charge when changing state and can couple transient disturbance into high-impedance nodes. Place the device close to the source and destination signals, keep sensitive traces away from select-line transitions, and provide a quiet ground reference. The SOIC footprint simplifies mixed-signal assembly, but the exposed pad is not applicable to this 16-pin package.

This page combines the manufacturer product information, distributor records, package details, documented switch characteristics, comparison data, and practical PCB guidance. It also distinguishes the tape-and-reel DG409CY+T ordering code from related DG409 variants and identifies which replacement candidates are supported by the available cross-reference records.

Drop-in alternatifler için DG409CY+T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller DG409CY+T (aynı form faktörü ve ayağa oturma) — farklı olan On-Resistance, Package.

Analog Devices
On-Resistance: 100 ohm
Package: 16-SOIC
İle Karşılaştır DG409CY+T →

DG409CY+

✅ Yerleştirme
Analog Devices
📦 16-SOIC
Dual 4:1 · 2 circuits · 8 channels · 100 ohm · 8 ohm maximum · 9 ohm maximum · 15 pC maximum · Bidirectional

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

DG409CY+T Özellikler

Switch Configuration Dual 4:1
Number of Circuits 2 circuits
Number of Channels per Circuit 4 channels
On-Resistance 100 ohm maximum
Channel Matching 8 ohm maximum
On-Resistance Flatness 9 ohm maximum
Charge Injection 15 pC maximum
Input Off-Leakage Less than 5 nA at 85 C
Signal Conduction Bidirectional
Operating Configuration Multiplexer or demultiplexer
Technology CMOS
Paket 16-pin narrow SOIC
Montaj Türü Surface mount
Order Code Suffix +T
Product Lifecycle Production
RoHS Durumu Compliant

DG409CY+T 16-pin narrow soic Pin Yapısı Kılavuzu

DG409CY+T (16-pin narrow soic paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

16-pin narrow soic paket pin çizelgesi için DG409CY+T

Ayrıntılı pin çıkış verisi mevcut değil: DG409CY+T.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

DG409CY+T için uygundur 6 uygulamas: Analog Data Acquisition, Automated Test Equipment, Precision Instrumentation, Communication Signal Routing, Battery-Powered Sensor Interface, Mixed-Signal Control Board.

🖥️

Analog Data Acquisition

The DG409CY+T can select several analog sensor or measurement channels before they reach an ADC. Its two independent 4:1 circuits provide compact routing, while guaranteed channel matching of 8 ohms maximum and on-resistance flatness of 9 ohms maximum help reduce channel-dependent errors. Bidirectional conduction also permits demultiplexing in systems that need source selection and return-path routing. The principal trade-off is a 100 ohm maximum on-resistance, which may create a measurable voltage-divider error with a high-impedance source. A 15 pC maximum charge-injection specification should also be checked against the input impedance, acquisition time, and signal bandwidth.

🏭

Automated Test Equipment

The DG409CY+T is well suited to routing test stimuli or measured responses in automated test equipment because two 4:1 switch functions fit into one 16-pin SOIC. The 8 ohm maximum channel matching and 9 ohm maximum resistance flatness improve consistency across selected channels, while bidirectional paths allow the same circuit topology to support multiplexing or demultiplexing. For low-level measurements, the 15 pC maximum charge injection and less than 5 nA input off-leakage at 85 C are important constraints. Keep switched-node traces away from sensitive measurement paths and validate settling behavior for the intended source impedance.

🔧

Precision Instrumentation

The DG409CY+T can route sensor, reference, or excitation signals inside precision instrumentation where repeatable channel behavior is important. Guaranteed matching of 8 ohms maximum reduces resistance variation between channels, while the 9 ohm maximum flatness specification controls resistance change across the specified signal range. Bidirectional operation supports flexible panel and system configurations. Designers should account for the 100 ohm maximum on-resistance when calculating divider errors with high source impedances, and should minimize trace capacitance around switched nodes to limit the practical effect of 15 pC maximum charge injection.

🌐

Communication Signal Routing

The DG409CY+T can select low-frequency communication or control signals when the circuit requires a compact bidirectional analog router rather than a purely digital mux. Two 4:1 circuits support independent routing paths, and the switch conducts equally well in either direction, allowing one device to handle source selection and return-path selection. The 100 ohm maximum on-resistance is suitable only where the driven load and source impedance produce acceptable attenuation. Engineers should check supply voltage, logic levels, bandwidth, and off-leakage against the line being routed, and keep connector or protection-network transients from exceeding the device's absolute maximum ratings.

🔋

Battery-Powered Sensor Interface

The DG409CY+T can reduce the number of discrete analog switches needed in a multi-sensor battery-powered interface. Its dual 4:1 organization permits two compact routing sections, and bidirectional conduction offers flexibility when sensors and host circuitry occasionally exchange roles. Low input off-leakage of less than 5 nA at 85 C helps isolate high-impedance nodes, although actual system leakage depends on surrounding components. Current consumption must be checked against the device's electrical characteristics for the selected supply voltage, while the 100 ohm maximum on-resistance determines whether the switch is suitable for the sensor's source impedance and dynamic range.

🧩

Mixed-Signal Control Board

The DG409CY+T is useful in a mixed-signal control board that selects external analog inputs, command voltages, or test points while digital control selects the active path. Its 16-pin narrow SOIC footprint offers a straightforward surface-mount implementation, and the two independent circuits provide more routing flexibility than a single 4:1 switch. Controlled channel matching and flatness are valuable when the selected node affects a precision feedback loop. Keep the multiplexed analog trace away from high-current switching nodes, provide a low-impedance ground reference, and validate whether 15 pC maximum charge injection produces unacceptable transients in high-gain amplifiers.

What is the DG409CY+T?
The DG409CY+T is an improved dual 4:1 CMOS analog multiplexer that routes two independent four-position analog signal paths in a 16-pin narrow SOIC. Analog Devices describes the DG409 family as an 8-channel or dual 4-channel device with 100 ohm maximum on-resistance, 8 ohm maximum channel matching, 9 ohm maximum flatness, and 15 pC maximum charge injection.
Where can I download the DG409CY+T datasheet PDF?
The official DG409 datasheet and product documentation are available from the Analog Devices DG409 product page at https://www.analog.com/en/products/dg409.html. That page provides the manufacturer data sheet and product-selection information for the DG409 family. For the exact DG409CY+T order code, verify the ordering table, suffix interpretation, and electrical limits before releasing a production design.
Where can I find the DG409CY+T pinout?
The DG409CY+T uses a 16-pin narrow SOIC package, and its pin arrangement should be taken from the pin-description table in the official DG409 data sheet. The manufacturer product page at https://www.analog.com/en/products/dg409.html provides the DG409 documentation. Use that table for common pins, select inputs, enable controls, and channel assignments rather than relying on a generic multiplexer diagram.
What are the key specifications of DG409CY+T that engineers should know?
The key DG409CY+T specifications are its dual 4:1 configuration, 100 ohm maximum on-resistance, 8 ohm maximum channel matching, 9 ohm maximum on-resistance flatness, 15 pC maximum charge injection, and less than 5 nA input off-leakage at 85 C. It is a bidirectional CMOS device in a 16-pin narrow SOIC and can operate as a multiplexer or demultiplexer.
Can the DG409CY+T be used as a demultiplexer?
Yes, the DG409CY+T can be used as a demultiplexer because its switch paths conduct equally well in either direction. The two 4:1 circuits can route analog signals to or from their common terminals. Bidirectional operation is useful in test systems, instrumentation, and signal-routing designs where the same multiplexer board must support different signal-flow directions.
How does DG409CY+T compare with DG409CY+?
The DG409CY+T and DG409CY+ belong to the same improved DG409 family and use a 16-pin narrow SOIC footprint, so the core 4:1 multiplexing function is compatible. The distinguishing ordering details are the +T tape-and-reel suffix on DG409CY+T and the suffix, grade, or packaging details listed for DG409CY+ in the manufacturer ordering table. Confirm those details before substituting one order code for the other.
What can replace the DG409CY+T?
DG409CY+ is the closest documented drop-in candidate because it is identified as an improved dual 4-channel CMOS multiplexer in a 16-pin narrow SOIC package with 100 ohm maximum on-resistance and 15 pC maximum charge injection. The available cross-reference records do not identify enough additional pin-compatible MPNs to support a larger list. Verify enable logic, select levels, temperature grade, and ordering suffix before replacing DG409CY+T.
Is the DG409CY+T suitable for data acquisition systems?
The DG409CY+T is suitable for data-acquisition routing when 100 ohm maximum on-resistance is acceptable and low switch disturbance matters. Its guaranteed 8 ohm channel matching, 9 ohm flatness, bidirectional conduction, and 15 pC maximum charge injection help maintain consistency among selected analog channels. A high-impedance sensor front end may require additional charge-injection compensation or a lower-switching-resistance device.
What is the on-resistance of DG409CY+T?
The DG409CY+T has a maximum on-resistance of 100 ohm. The same Analog Devices DG409 family also guarantees channel matching of 8 ohm maximum and on-resistance flatness of 9 ohm maximum over the specified signal range. These specifications should be considered together because resistance consistency often matters more in instrumentation than the absolute on-resistance alone.
Is the DG409CY+T suitable for test and measurement equipment?
Yes, the DG409CY+T fits test and measurement equipment that must route multiple analog inputs through a compact, bidirectional multiplexer. Two independent 4:1 circuits provide flexible stimulus or signal selection, while 8 ohm maximum channel matching and 9 ohm flatness support repeatable measurements. Layout and settling time still require validation because 15 pC maximum charge injection can disturb high-impedance sources.
What is the lead time for DG409CY+T?
The current lead time for DG409CY+T should be requested through the Request a Quote form on this page. Manufacturer production status is listed as production, but production status does not establish a fixed lead time, available quantity, or date code. Confirm the required quantity, reel orientation, and shipment destination when requesting a quotation.
Is DG409CY+T in stock?
Current DG409CY+T inventory changes by seller and quantity, so use the Request a Quote form on this page for an availability confirmation. The product is identified as production by Analog Devices, and distributor records show active catalog entries for the exact order code. Quote requests should state the required quantity, package quantity, and acceptable delivery date.
What is the price of DG409CY+T?
The current DG409CY+T price is presented through the Request a Quote form on this page. The displayed commercial terms are calculated for the requested quantity and can change with market availability, packaging, and order volume. Use the quote form rather than relying on a historical single-unit figure that may no longer reflect current inventory.
Where to buy DG409CY+T online?
Use the Request a Quote form on this page to request DG409CY+T pricing, stock, and delivery terms from XAIPART. The exact order code is listed as a 16-SOIC production device in the DG409 family, allowing the request to be matched directly against the DG409CY+T ordering information. Include reel quantity, inspection requirements, and target arrival date in the request.
Is DG409CY+T RoHS compliant?
Yes, DG409CY+T is identified as RoHS compliant in the available component record. RoHS compliance concerns restricted substances in the component and does not by itself establish REACH, conflict-minerals, automotive-qualification, or halogen-free status. Request current declarations and supporting documentation through the Request a Quote form when procurement requires compliance evidence.

Mühendislik referans verileri: DG409CY+T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose DG409CY+T when the design requires a production 4:1 CMOS multiplexer in a 16-SOIC tape-and-reel package, particularly when bidirectional routing, controlled channel matching, or low off-leakage is important. DG409CY+ is the closest documented alternative because it uses the same narrow 16-pin SOIC format and the same improved dual 4-channel CMOS architecture; distinguish it primarily by the packaging and order-code details. The DG409CY+T is a better fit than a generic single-channel analog switch when two independent 4:1 routing paths are required. It may not be the best choice for very low-impedance sources, because its maximum on-resistance is 100 ohm, or for high-gain acquisition nodes where 15 pC maximum charge injection creates an unacceptable transient. Before finalizing any substitution, verify enable polarity, select thresholds, supply voltage, absolute maximum ratings, temperature grade, and the exact manufacturer pin assignment.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün DG409CY+
Brand Analog Devices Analog Devices
Package 16-SOIC 16-pin narrow SOIC
Switch Configuration Dual 4:1 Dual 4:1
Number of Circuits 2 circuits 2 circuits
On-Resistance 100 ohm maximum 100 ohm maximum
Channel Matching 8 ohm maximum 8 ohm maximum
On-Resistance Flatness 9 ohm maximum 9 ohm maximum
Charge Injection 15 pC maximum 15 pC maximum
Signal Conduction Bidirectional Bidirectional
Technology CMOS CMOS
Ordering Suffix +T tape-and-reel order code Non-T order code

Ana Farklılayıcılar

  • Controlled channel matching supports repeatable measurements (karşılaştırma:DG409CY+)
  • Low on-resistance flatness improves signal-range consistency (karşılaştırma:DG409CY+)
  • Bidirectional dual-multiplexer functionality in a compact package (karşılaştırma:DG409CY+)

Tasarım Notları

Treat the 15 pC maximum charge injection as a possible source of transient error rather than assuming the switch changes only DC resistance. For a switched node feeding a high-impedance amplifier, estimate the resulting voltage disturbance as charge divided by the effective input and stray capacitance, then allow amplifier recovery time before sampling. Add a selectable input resistor or clamp network when the calculated transient could exceed the downstream signal range.

Route the multiplexed analog node as a short trace directly between the DG409CY+T switch terminal and the receiving circuit. Keep the common terminal and switched terminals away from digital clocks, relay coils, and power-converter switching nodes. Place the device near the connector or sensor interface it serves when possible, because long traces add capacitance and susceptibility to coupled disturbance, which can increase settling time after selection.

Do not choose the DG409CY+T solely from the 4:1 label. Verify the enable polarity, select logic levels, supply range, absolute maximum ratings, and exact package drawing in the manufacturer data sheet. Also confirm that the +T order code corresponds to the required tape-and-reel format. A footprint match alone does not guarantee that two multiplexers have identical control timing or channel assignments.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The available component record identifies DG409CY+T as RoHS compliant. No automotive qualification, REACH, halogen-free, or conflict-minerals declaration was established for the exact order code.

Veri doğrulanma tarihi: 2026-11-16 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

DG409CY+T datasheet DG409CY+T pinout DG409CY+T datasheet pdf DG409CY+T equivalent DG409CY+T replacement DG409CY+T cross reference DG409CY+T vs DG409CY+ DG409CY+T 16-SOIC pinout DG409CY+T price DG409CY+T stock Analog Devices DG409CY+T DG409CY+T dual 4:1 multiplexer

İlgili Bileşenler ve Terimler

Analog Devices DG409CY+T DG409CY+ DG409 CMOS analog multiplexer analog switch multiplexer demultiplexer dual 4:1 switch bidirectional conduction on-resistance channel matching on-resistance flatness charge injection input off-leakage 16-pin narrow SOIC SOIC package family surface mount SMD analog signal routing data acquisition test and measurement RoHS
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle