Analog Devices

DG419CJ+ - 35Ω SPDT CMOS Analog Switch | Analog Devices

MPN: DG419CJ+ ✓ Aktif
10 V to 30 V Vdss 35 Ω maximum Rds(on) 8-pin DIP Package
MOQ: 1 |

DG419CJ+ Genel Bakış

Analog Devices DG419CJ+ is a precision, 1-channel CMOS SPDT analog switch with a maximum on-resistance of 35 Ω, on-resistance matching of 3 Ω maximum, and on-resistance flatness of 4 Ω maximum. The device is packaged in an 8-pin through-hole DIP package and supports dual supply configurations of ±10 V to ±30 V or ±4.5 V to ±20 V. It is designed for precision signal-routing applications requiring low and repeatable insertion resistance.

An SPDT analog switch is a semiconductor device that connects one common terminal to one of two switched terminals. In the broader component hierarchy, the DG419CJ+ belongs to the analog switch, analog multiplexer, interface IC, and semiconductor categories. This topology allows a signal source to be routed to either destination, or alternately connects two external nodes, making it useful for test systems, measurement equipment, signal routing, and precision analog systems.

Key characteristics include matching between the two switch paths to within 3 Ω maximum and flatness across the signal range to within 4 Ω maximum. These parameters help minimize path-dependent gain error and distortion when the same signal is routed through either side of the switch. The monolithic CMOS construction supports equal signal conduction in either direction and provides a compact interface IC solution for bipolar and split-supply analog circuits.

The DG419CJ+ offers a practical 35 Ω maximum on-resistance for precision, rather than ultra-low-impedance, routing. Its 8-pin DIP package accepts a 0.300-inch, 7.62 mm body width and facilitates through-hole assembly, prototyping, and socket-based laboratory use. The switch operates with positive and negative analog supplies, allowing bipolar signals to pass without single-ended signal-path restrictions.

Typical uses include precision test and measurement systems, sample-and-hold front ends, signal-routing matrices, laboratory equipment, and industrial control modules. The matched paths are especially useful when calibration or measurement results must remain consistent regardless of which switched terminal is selected. It is also suitable for designs that route low-frequency analog signals rather than high-speed RF or ultrafast data lines.

Designers should evaluate the 35 Ω on-resistance against the source and load impedance. A high-impedance receiving circuit will reduce the impact of that resistance, while a low-impedance load may require an amplifier or a lower-resistance switch. Also verify control-pin levels, supply sequencing, and unused-pin handling against the Analog Devices DG419 data sheet before finalizing the layout.

This product page combines the manufacturer’s core electrical characteristics with application-specific design guidance, package information, comparison criteria, and practical selection guidance. It is intended to help engineers determine whether the DG419CJ+ offers the required switch topology, resistance behavior, supply range, and through-hole footprint before beginning a board design.

Drop-in alternatifler için DG419CJ+ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller DG419CJ+ (aynı form faktörü ve ayağa oturma) — farklı olan Mounting Type, On-Resistance Flatness, On-Resistance Matching, Package, Switch Configuration.

Analog Devices
Mounting Type: Through-hole
On-Resistance Flatness: 4 Ω maximum over the signal range
On-Resistance Matching: 3 Ω maximum between switches
İle Karşılaştır DG419CJ+ →

DG419CJ

✅ Yerleştirme
📦 8-pin DIP
Ordering suffix differs by the plus designation; 8-pin DIP and SPDT function match, with no quantified electrical difference stated.

📋 Katalogda Olmayan Referans Alternatifi

DG419DJ+

✅ Yerleştirme
Analog Devices
📦 8-pin DIP
SPDT · 1 circuit · 2:1 · 35 Ω maximum · 3 Ω maximum between switches · 4 Ω maximum over the signal range · Monolithic CMOS · 44 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

DG419DJ+

✅ Yerleştirme
Analog Devices
📦 8-pin DIP
SPDT · 1 circuit · 2:1 · 35 Ω maximum · 3 Ω maximum between switches · 4 Ω maximum over the signal range · Monolithic CMOS · 44 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

DG419CJ+ Maksimum Değerlendirmeler & Elektriksel Özellikler

Switch Configuration SPDT
Number of Channels 1 channel
On-Resistance 35 Ω maximum
On-Resistance Matching 3 Ω maximum
On-Resistance Flatness 4 Ω maximum
Technology CMOS
High-Side Supply Voltage Range 10 V to 30 V
Low-Side Supply Voltage Range -30 V to -10 V
Alternate Supply Voltage Range 4.5 V to 20 V
Alternate Low-Side Supply Voltage Range -20 V to -4.5 V
Paket 8-pin DIP
Package Body Width 0.300 inch (7.62 mm)
Montaj Türü Through hole
Pin Sayısı 8 pins
Signal Conduction Direction Bidirectional
Yaşam Döngüsü Durumu Production

DG419CJ+ 0.300 inch (7.62 mm) Pin Yapısı Kılavuzu

DG419CJ+ (0.300 inch (7.62 mm) paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

0.300 inch (7.62 mm) paket pin çizelgesi için DG419CJ+

Ayrıntılı pin çıkış verisi mevcut değil: DG419CJ+.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

DG419CJ+ için uygundur 6 uygulamas: Precision Test and Measurement Systems, Analog Signal Routing Matrices, Sample-and-Hold Front Ends, Laboratory Interface Equipment, Industrial Control Signal Selection, Programmable Low-Frequency Signal Paths.

🖥️

Precision Test and Measurement Systems

The DG419CJ+ fits precision signal-routing and instrument-selection circuits where path-dependent error must remain predictable. Its 35 Ω maximum on-resistance is paired with matching of 3 Ω maximum between the two switched paths and flatness of 4 Ω maximum across the signal range. Place the common terminal at the signal source, connect the two destination terminals to the measured and reference channels, and drive the control input from the test controller. The matched paths help limit calibration differences when an instrument alternates between DUT, standard, and termination networks.

🌐

Analog Signal Routing Matrices

The DG419CJ+ is appropriate for small modular analog routing matrices that must select one of two signal paths with repeatable resistance behavior. Its 1-channel SPDT topology provides a simple way to connect a shared source to either of two destinations. The 3 Ω maximum matching specification helps prevent one selected path from changing the effective source impedance relative to the other path. For higher-impedance sensors and amplifiers, the 35 Ω maximum insertion resistance can often be accepted with little signal attenuation, provided the control timing and supply rails satisfy the application.

📡

Sample-and-Hold Front Ends

The DG419CJ+ can implement a precision sampling-path selection function in laboratory and industrial measurement front ends. Its low and matched on-resistance characteristics reduce variation between the sampled signal and a reference or calibration path. The CMOS switch supports bipolar signals when operated with the appropriate positive and negative supplies, while the 8-pin DIP package simplifies through-hole prototyping and socketed laboratory assembly. Designers should verify the signal bandwidth, charge injection, and control-input timing against the acquisition requirements before using the switch directly at a high-impedance sampling node.

🔧

Laboratory Interface Equipment

The DG419CJ+ is well suited to bench instruments and interface modules that select between external and internal test signals. Its through-hole 8-pin DIP package permits straightforward PCB assembly, socket use, and replacement during instrument development. The 35 Ω maximum on-resistance introduces a manageable loss when driving a high-impedance instrument input, while 3 Ω maximum path matching supports repeatable channel selection. Use separate supply bypassing near the device and keep control traces away from sensitive analog terminals to reduce coupling into the switched signal.

🏭

Industrial Control Signal Selection

The DG419CJ+ can select one of two analog command or feedback paths in industrial control modules where precision and repeatability matter more than extremely low insertion resistance. The matched switched paths help maintain consistent behavior when a controller alternates between a sensor input and a reference level. The device accepts bipolar supplies in the ±4.5 V to ±20 V range, which supports systems using positive and negative analog rails. Its 35 Ω maximum on-resistance should be checked against the control input impedance, and the control logic must remain stable across the full supply range.

🧩

Programmable Low-Frequency Signal Paths

The DG419CJ+ supports programmable routing in educational, diagnostic, and low-frequency automated test equipment. One control signal determines whether the common node connects to the normally closed or normally open path, allowing software to select sources or loads without changing wiring. The 1-channel SPDT arrangement is simple to implement and inspect, and the 8-pin DIP package is convenient for prototyping. Because this is a precision analog switch rather than an ultrafast RF switch, designers should evaluate bandwidth and insertion-loss requirements before applying it to high-frequency signals.

What is the DG419CJ+?
The DG419CJ+ is a precision, 1-channel CMOS SPDT analog switch in an 8-pin DIP package. According to the Analog Devices DG419 product page, the switch provides a maximum on-resistance of 35 Ω, on-resistance matching of 3 Ω maximum between paths, and on-resistance flatness of 4 Ω maximum across the signal range. It supports bipolar supply arrangements of ±10 V to ±30 V or ±4.5 V to ±20 V.
What are the key specifications of DG419CJ+ that engineers should know?
The DG419CJ+ combines a 1-channel SPDT configuration, 35 Ω maximum on-resistance, 3 Ω maximum on-resistance matching, and 4 Ω maximum on-resistance flatness in an 8-pin through-hole DIP package. According to the Analog Devices DG419 documentation, the supported bipolar supply configurations are ±10 V to ±30 V and ±4.5 V to ±20 V. These characteristics make the device most suitable for precision, relatively low-frequency signal routing.
Where to buy DG419CJ+ online?
The DG419CJ+ can be requested through the Request a Quote form on this page. The form lets you specify the required quantity and package form and request current commercial terms without relying on a static listing. Analog Devices identifies the DG419 family as being in production, while current distribution, lot traceability, and delivery scheduling should be confirmed when the quotation is prepared.
What is the price of DG419CJ+?
Current pricing for the DG419CJ+ is handled through the Request a Quote form on this page rather than through a static price table. Submit the required quantity, shipment destination, and any date requirements to obtain current commercial terms. This approach also allows procurement to confirm authorized sourcing, order quantities, and availability for the exact DG419CJ+ ordering code.
What is the lead time for DG419CJ+?
Use the Request a Quote form on this page to request the current lead time and minimum-order quantity for DG419CJ+. Lead time can depend on order size, package form, lot allocation, and destination, so it should not be inferred from generic family-level inventory information. The Analog Devices product page identifies the DG419 family as production, while the quotation provides the relevant current schedule.
Is DG419CJ+ in stock?
Current DG419CJ+ inventory should be confirmed through the Request a Quote form on this page. The request should include the quantity required and any acceptable date or lot conditions. Because Analog Devices lists the DG419 family as production, the quotation process can determine current supply without presenting a potentially stale stock claim on the product page.
Where can I download the DG419CJ+ datasheet PDF?
The official DG419 documentation is available through the Analog Devices DG419 product page linked from this listing. The page provides the manufacturer’s Data Sheet for the DG417, DG418, and DG419 precision CMOS analog-switch family. Use the pin-description table, electrical-characteristics table, and package drawings for the DG419CJ+ ordering option rather than relying on a third-party transcription.
Where can I find the DG419CJ+ pinout?
Use the pin-description table and package drawing in the official Analog Devices DG419 Data Sheet to assign the eight DG419CJ+ terminals. The package is an 8-pin DIP with a 0.300-inch, 7.62 mm body width. Before assigning signals, confirm the common, normally closed, and normally open terminals together with the control and supply pins in the manufacturer diagram.
What is the difference between DG419CJ+ and DG419CJ?
The DG419CJ+ and DG419CJ identify ordering forms of the same Analog Devices DG419 precision SPDT switch family and share the 8-pin DIP implementation. The manufacturer listing presents the DG419 family with matching of 3 Ω maximum and flatness of 4 Ω maximum. Distributor records may treat the plus and non-plus ordering codes differently, so the exact suffix, temperature grade, and package marking should be confirmed before procurement.
Can DG419DJ+ replace DG419CJ+?
The DG419DJ+ can be considered for a same-package replacement review because it is identified as an improved SPDT switch in an 8-pin DIP package. According to the DG419 family documentation, the redesigned family provides matching of 3 Ω maximum and flatness of 4 Ω maximum. Final substitution still requires verification of temperature grade, supply range, control thresholds, production status, and the exact pin assignments.
When should I choose DG419CJ+ over DG418DJ+?
Choose the DG419CJ+ when the circuit requires a single SPDT routing function with matched paths; choose DG418DJ+ when the design needs the related single-pole function offered by the DG418 family. The DG419CJ+ provides matching of 3 Ω maximum and flatness of 4 Ω maximum according to Analog Devices. The choice must follow the required switch topology rather than package appearance alone.
Is DG419CJ+ suitable for precision test and measurement equipment?
The DG419CJ+ is suitable for precision test and measurement routing when the signal bandwidth and impedance levels are compatible with a 35 Ω maximum on-resistance. Its 3 Ω maximum matching between switch paths helps limit path-dependent error, while 4 Ω maximum flatness reduces resistance variation across the signal range. The Analog Devices DG419 family is specifically described as a precision CMOS analog switch.
What can replace DG419CJ+?
The closest documented replacement candidates are other 8-pin DIP ordering options in the Analog Devices DG419 family, including DG419CJ and DG419DJ+. A valid drop-in choice must match the 8-pin footprint, SPDT topology, control logic, supply range, and required temperature grade. The official Analog Devices DG419 documentation should be used to verify each candidate before its ordering code is approved.
Is DG419CJ+ the same as ADG419?
No drop-in equivalence should be assumed between DG419CJ+ and ADG419. The DG419CJ+ is documented in an 8-pin DIP package, whereas the cross-reference information identifies ADG419 as a related precision SPDT switch family with different package options. A functional similarity does not establish identical lead mapping or PCB compatibility. Use the package drawing and terminal assignments for the specific replacement before considering a board substitution.
What is the best cross-brand replacement for DG419CJ+?
No cross-brand drop-in replacement is established by the available manufacturer and cross-reference records for the exact 8-pin DIP DG419CJ+. A valid alternative would require the same 8-pin footprint, pin-to-pin SPDT connections, compatible control thresholds, suitable supply range, and comparable on-resistance behavior. The Analog Devices DG419 family ordering options remain the best-supported same-package candidates, but each requires an engineering approval.

Mühendislik referans verileri: DG419CJ+ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the DG419CJ+ for a precision, 1-channel SPDT routing function implemented in an 8-pin through-hole DIP package. Its 35 Ω maximum on-resistance is appropriate for moderate- or high-impedance analog circuits, while 3 Ω maximum path matching helps maintain repeatable behavior when both sides of the switch are used. Select DG419CJ when the non-plus ordering code is the approved configuration for the required temperature grade. Consider DG419DJ+ or DG419DJ only after checking their exact grade, control thresholds, and lifecycle conditions against the manufacturer documentation. Choose DG419DY+ when the same DG419 family function is required in a surface-mount SOIC design, but it is not a direct PCB-footprint replacement. No cross-brand 8-pin DIP drop-in has been established, so a different manufacturer’s SPDT switch should be used only after its package drawing and pin mapping have been verified.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün DG419CJ DG419DJ+ DG419DJ
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-pin DIP 8-pin DIP - same 8-pin DIP - same 8-pin DIP - same
Switch Configuration SPDT SPDT SPDT SPDT
Number of Channels 1 channel 1 channel 1 channel 1 channel
On-Resistance Matching 3 Ω maximum 3 Ω maximum 3 Ω maximum 3 Ω maximum
On-Resistance Flatness 4 Ω maximum 4 Ω maximum 4 Ω maximum 4 Ω maximum
Technology CMOS CMOS CMOS CMOS

Ana Farklılayıcılar

  • Matched switch paths reduce path-dependent measurement error (karşılaştırma:DG419CJ)
  • Through-hole precision switching in the same 8-pin DIP family (karşılaştırma:DG419DY+)
  • Precision SPDT function without changing the family architecture (karşılaştırma:DG419DJ+)

Tasarım Notları

Evaluate the 35 Ω maximum on-resistance together with the source and load impedance. A resistive divider formed by the switch and a low-impedance load can attenuate the signal more than expected, while a high-impedance receiving amplifier will usually preserve the signal more effectively. For bidirectional operation, keep both switched terminals within the specified signal and supply ranges and observe the absolute voltage limits in the manufacturer Data Sheet.

Route the common, normally closed, and normally open analog terminals away from the digital control traces. Place the device close to the source and destination connections to minimize parasitic capacitance and resistance, particularly when the switched signal is dynamically measured. Add local supply bypassing between each supply pin and ground, using a short ground return to limit switching transients that could couple into adjacent analog signals.

Do not treat the similar DG419 ordering suffixes as automatically identical without checking the exact temperature grade, control thresholds, and supply conditions. Also confirm the polarity and sequencing of the positive and negative supplies before applying bipolar signals. Because the device switches equally well in either direction, incorrect terminal identification can connect an unintended source to the common node even when the control command appears correct.

Use a low-impedance ground reference and avoid placing sensitive analog traces beneath or immediately beside the control input. If a relay or other slow-changing signal controls the switch, add suitable control conditioning rather than relying on a floating logic input. Keep prototyping wiring short, because breadboard capacitance and resistance can obscure the low-level behavior that the precision DG419 family is intended to preserve.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The exact compliance status is not stated for the DG419CJ+ ordering code. A comparison page labels RoHS details for the DG419 family but does not explicitly establish a compliant or non-compliant result. The switch is an interface IC rather than an automotive-qualified AEC-Q100 device.

Veri doğrulanma tarihi: 2026-11-10 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

DG419CJ+ datasheet DG419CJ+ datasheet pdf DG419CJ+ pinout DG419CJ+ equivalent DG419CJ+ replacement DG419CJ+ cross reference DG419CJ+ vs DG419DY+ DG419CJ+ price DG419CJ+ stock Analog Devices DG419CJ+ DG419CJ+ 35 ohm SPDT switch DG419CJ+ 8 pin DIP DG419CJ+ application circuit

İlgili Bileşenler ve Terimler

Analog Devices DG419CJ+ DG419CJ DG419DJ+ DG419DJ DG419DY+ precision analog switch SPDT switch single-pole double-throw analog multiplexer interface IC CMOS analog switch monolithic analog switch on-resistance on-resistance matching on-resistance flatness bipolar analog signal 8-pin DIP PDIP-8 through-hole package precision test and measurement signal routing Analog Devices DG419 RoHS AEC-Q100
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle