EFM32TG825F32-BGA48T - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG825F32-BGA48T ✗ Son Kullanım ZamanıEFM32TG825F32-BGA48T Genel Bakış
An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control. Tiny Gecko devices belong to the MCU hierarchy, combining a processor core, memory, communications peripherals, analog interfaces, timers, and GPIO in one mixed-signal package. This integration reduces component count and lets peripherals handle repetitive tasks while the CPU sleeps, improving system-level power efficiency.
Key features include 32 KB of Flash configured as 32K x 8, 4 KB of SRAM, a 32 MHz maximum clock, an 8 x 11 LCD controller, AES encryption hardware, and three operational amplifiers. The operating supply range is 1.85 V to 3.8 V. Silicon Labs also identifies 0.6 µA Stop-mode consumption and 150 µA/MHz Run-mode consumption as characteristic EFM32TG efficiency figures.
The device's architecture is based on the ARM Cortex-M3 32-bit RISC core, which supports interrupt-driven embedded execution and efficient wake-up handling. Autonomous peripherals can continue measurement, communication, or timing functions while the processor is in a low-power state. Integrated analog and security resources make the MCU suitable for designs that need more capability than a basic GPIO controller but do not require a larger system-on-chip.
Typical uses include connected industrial sensors, compact medical instruments, energy-aware IoT nodes, battery-powered portable products, LCD-equipped user interfaces, and secure embedded control panels. The LCD controller supports compact human-machine interfaces, while AES hardware can accelerate protected data handling. The three operational amplifiers support local analog conditioning and can reduce the need for external signal-conditioning components.
Board design should account for the small 4 x 4 mm BGA footprint, including fine-pitch routing, via requirements, and assembly-process capability. The 1.85 V to 3.8 V operating range also requires careful rail design so core, analog, and I/O voltages remain within their specified limits. Use the manufacturer pin-description table and reference design when assigning tracks and decoupling.
This page combines device specifications, verified drop-in candidates, package-aware comparisons, and practical implementation guidance to support component selection, schematic review, PCB planning, and sourcing decisions for the EFM32TG825F32-BGA48T.
Drop-in alternatifler için EFM32TG825F32-BGA48T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller EFM32TG825F32-BGA48T (aynı form faktörü ve ayağa oturma) — farklı olan Flash Memory, Package, Product Type, Supply Voltage Range, Series.
EFM32TG225F32-BGA48
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
EFM32TG825F16-BGA48T
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →EFM32TG225F16-BGA48
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →EFM32TG825F32-BGA48T Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Processor Architecture | ARM Cortex-M3, 32-bit RISC |
| Flash Memory | 32 KB (32K x 8) |
| RAM | 4 KB |
| Supply Voltage Range | 1.85 V to 3.8 V |
| Paket | 48-BGA (4 x 4 mm) |
| Montaj Türü | Surface mount |
| İşletim Sıcaklığı Aralığı | -40 °C to +85 °C |
| LCD Controller | 8 x 11 segments |
| Encryption Accelerator | AES hardware accelerator |
| Operational Amplifiers | 3 integrated operational amplifiers |
| Stop-Mode Current | 0.6 µA |
| Run-Mode Current | 150 µA/MHz |
| Core Instruction Set Performance | Up to 1.25 Dhrystone MIPS/MHz |
EFM32TG825F32-BGA48T 48-bga (4 x 4 mm) Pin Yapısı Kılavuzu
EFM32TG825F32-BGA48T (48-bga (4 x 4 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: EFM32TG825F32-BGA48T.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
EFM32TG825F32-BGA48T için uygundur 6 uygulamas: Battery-Powered IoT Sensor Nodes, Compact Medical Instruments, Industrial Monitoring and Automation, Secure Connected Equipment, LCD-Equipped User Interfaces, Portable Sensing and Measurement.
Battery-Powered IoT Sensor Nodes
The EFM32TG825F32-BGA48T fits compact wireless or wired sensor nodes because its 32-bit Cortex-M3 core operates up to 32 MHz while the Tiny Gecko family supports low-power states and autonomous peripheral operation. At 150 µA/MHz in Run mode and as little as 0.6 µA in Stop mode, it can reduce processor-active time when measurements and communications are intermittent. Its 32 KB Flash and 4 KB RAM support compact protocol stacks, while the small 4 x 4 mm 48-BGA package preserves board area.
Önerilen
Compact Medical Instruments
The EFM32TG825F32-BGA48T is suitable for compact medical and diagnostic instruments that require deterministic embedded control in a limited footprint. Its 32 MHz Cortex-M3 processor handles local control and user-interface logic, while the three integrated operational amplifiers can support analog signal conditioning close to the sensor input. The 1.85 V to 3.8 V operating range fits low-voltage portable systems, and the 48-BGA package allows a small board. Medical qualification and regulatory suitability remain system-level responsibilities.
Önerilen
Industrial Monitoring and Automation
The EFM32TG825F32-BGA48T can serve as the local controller in industrial monitoring equipment where autonomous sensing, fast wake-up, and compact integration are valuable. The 32 MHz Cortex-M3 core is sufficient for event-driven control, data acquisition, and communication handling, while the 4 KB RAM supports short control loops and buffering. Its 48-BGA package reduces PCB area, and the -40 °C to +85 °C operating range suits industrial equipment. Designers should provide appropriate power regulation, isolation, and environmental protection.
Önerilen
Secure Connected Equipment
The EFM32TG825F32-BGA48T suits secure connected equipment because its hardware AES accelerator can perform supported encryption operations efficiently within the microcontroller. The 32 KB Flash and 4 KB RAM provide room for firmware, device identity, and short protocol buffers, while the 32 MHz Cortex-M3 core supports network control and status handling. The small 48-BGA package also helps designers retain compact industrial or appliance form factors. Key provisioning, certificate storage, update procedures, and security certification must be addressed at system level.
Önerilen
LCD-Equipped User Interfaces
The EFM32TG825F32-BGA48T is well matched to compact LCD user interfaces because the device includes an 8 x 11 LCD controller alongside a 32 MHz Cortex-M3 processor. This integration allows a control panel to manage display segments, buttons, indicators, and local logic without dedicating a separate display controller. The 4 KB RAM and 32 KB Flash are suitable for menu and status firmware, while the 48-BGA footprint supports dense handheld or instrument layouts. Display voltage, bias, segment mapping, and glass requirements must match the manufacturer interface specifications.
Önerilen
Portable Sensing and Measurement
The EFM32TG825F32-BGA48T supports portable measurement products that combine low power, analog capability, and compact packaging. The three integrated operational amplifiers can handle local amplification or signal conditioning for low-frequency sensors, reducing discrete-component count in appropriate designs. The Cortex-M3 core performs acquisition sequencing and calibration, while Stop mode can lower consumption between measurements. The 1.85 V to 3.8 V supply range and 4 x 4 mm 48-BGA package are advantageous in wearables, portable test equipment, and handheld analyzers, although precision and noise performance depend on the selected external network.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: EFM32TG825F32-BGA48T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | EFM32TG225F32-BGA48 | EFM32TG825F16-BGA48T | EFM32TG225F16-BGA48 |
|---|---|---|---|---|
| Package | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor | ARM Cortex-M3, 32-bit RISC | ARM Cortex-M3, 32-bit RISC | ARM Cortex-M3, 32-bit RISC | ARM Cortex-M3, 32-bit RISC |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 32 KB (32K x 8) | 32 KB | 16 KB | 16 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB |
Ana Farklılayıcılar
- Higher Flash capacity than the 16 KB alternatives (karşılaştırma:EFM32TG825F16-BGA48T)
- Retains the full 32 KB Flash configuration (karşılaştırma:EFM32TG225F32-BGA48)
- Integrated analog resources reduce external component demand (karşılaştırma:EFM32TG225F32-BGA48)
- Compact 4 x 4 mm package supports space-constrained assemblies (karşılaştırma:EFM32TG225F16-BGA48)
Tasarım Notları
The 48-BGA package has a 4 x 4 mm body and requires a manufacturing process capable of routing the specified ball pitch and creating any required escape vias. Preserve the manufacturer land pattern, place decoupling capacitors beside the relevant supply balls, and avoid long return paths between the MCU and analog circuitry. Validate escape routing, solder-mask definition, and assembly inspection requirements before releasing the PCB.
Design the supply network for the documented 1.85 V to 3.8 V operating range. Place bulk and high-frequency decoupling close to the power and ground balls, maintain a low-impedance ground reference, and check each external signal against the applicable I/O voltage domain. The MCU can enter Stop mode at currents as low as 0.6 µA, so rail leakage from the regulator, pull resistors, sensors, and pull-up networks can dominate the sleep budget.
Keep the three integrated operational amplifiers close to their source and destination nodes to minimize sensitive-node trace length and parasitic capacitance. Separate analog inputs from switching supplies, radio outputs, and fast digital clock routes. Connect ground balls using the recommended layer stack and return-path arrangement, and evaluate the analog performance with actual sensor impedance and frequency rather than relying only on general layout conventions.
Do not treat a matching 48-BGA body as proof of interchangeable silicon. Confirm the complete ball map, supply pins, ground assignments, LCD interface, ADC and operational-amplifier channels, AES availability, debug signals, and boot or programming connections. When reducing Flash from 32 KB to 16 KB, also verify linker-map size, bootloader requirements, firmware update space, and application data storage before approving the substitution.
Uyumluluk Bilgisi
No product-specific environmental or material compliance declarations were identified in the cited device pages. Qualification for automotive, industrial, or medical use must be assessed separately.