Silicon Labs

EFM32TG825F32-BGA48T - 32MHz Cortex-M3 MCU | Silicon Labs

MPN: EFM32TG825F32-BGA48T ✗ اختتامِ زندگی
1.85 V to 3.8 V Vdss 0.6 µA Id 48-BGA (4 x 4 mm) Package 32 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

EFM32TG825F32-BGA48T جائزہ

Silicon Labs EFM32TG825F32-BGA48T is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating at up to 32 MHz, with 32 KB of Flash memory, 4 KB of RAM, and a 48-BGA package measuring 4 x 4 mm. It combines an energy-efficient processor core with autonomous peripherals, analog integration, and low-power operating modes for embedded, industrial, medical, and battery-powered systems.

An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control. Tiny Gecko devices belong to the MCU hierarchy, combining a processor core, memory, communications peripherals, analog interfaces, timers, and GPIO in one mixed-signal package. This integration reduces component count and lets peripherals handle repetitive tasks while the CPU sleeps, improving system-level power efficiency.

Key features include 32 KB of Flash configured as 32K x 8, 4 KB of SRAM, a 32 MHz maximum clock, an 8 x 11 LCD controller, AES encryption hardware, and three operational amplifiers. The operating supply range is 1.85 V to 3.8 V. Silicon Labs also identifies 0.6 µA Stop-mode consumption and 150 µA/MHz Run-mode consumption as characteristic EFM32TG efficiency figures.

The device's architecture is based on the ARM Cortex-M3 32-bit RISC core, which supports interrupt-driven embedded execution and efficient wake-up handling. Autonomous peripherals can continue measurement, communication, or timing functions while the processor is in a low-power state. Integrated analog and security resources make the MCU suitable for designs that need more capability than a basic GPIO controller but do not require a larger system-on-chip.

Typical uses include connected industrial sensors, compact medical instruments, energy-aware IoT nodes, battery-powered portable products, LCD-equipped user interfaces, and secure embedded control panels. The LCD controller supports compact human-machine interfaces, while AES hardware can accelerate protected data handling. The three operational amplifiers support local analog conditioning and can reduce the need for external signal-conditioning components.

Board design should account for the small 4 x 4 mm BGA footprint, including fine-pitch routing, via requirements, and assembly-process capability. The 1.85 V to 3.8 V operating range also requires careful rail design so core, analog, and I/O voltages remain within their specified limits. Use the manufacturer pin-description table and reference design when assigning tracks and decoupling.

This page combines device specifications, verified drop-in candidates, package-aware comparisons, and practical implementation guidance to support component selection, schematic review, PCB planning, and sourcing decisions for the EFM32TG825F32-BGA48T.

کے لیے ڈراپ اِن متبادل EFM32TG825F32-BGA48T — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EFM32TG825F32-BGA48T (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Flash Memory, Package, Product Type, Supply Voltage Range, Series.

Silicon Labs
Flash Memory: 16 KB (16K x 8 bits)
موازنہ کریں EFM32TG825F32-BGA48T →
Silicon Labs
Flash Memory: 8 KB (8K x 8)
Series: Tiny Gecko
موازنہ کریں EFM32TG825F32-BGA48T →
Silicon Labs
Flash Memory: 16KB (16K x 8)
Package: 48-BGA (4x4 mm)
Product Type: 32-bit embedded microcontroller
موازنہ کریں EFM32TG825F32-BGA48T →
Silicon Labs
Flash Memory: 8 KB (8K x 8)
Package: 48-BGA (4x4 mm)
Supply Voltage Range: 1.98 V to 3.8 V
موازنہ کریں EFM32TG825F32-BGA48T →

EFM32TG225F32-BGA48

✅ ڈراپ-اِن
📦 48-BGA (4 x 4 mm)
Same 32 MHz Cortex-M3 core, 32 KB Flash, 4 KB RAM, and 48-BGA footprint; integrated LCD, AES, and three-op-amp feature requirements must be reverified.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

EFM32TG825F16-BGA48T

✅ ڈراپ-اِن
Silicon Labs
📦 48-BGA (4 x 4 mm)
32-bit embedded microcontroller · EFM32 Tiny Gecko · ARM Cortex-M3 · 32 MHz · 16KB (16K x 8) · 1.85 V to 3.8 V · Approximately 1.0 µA at 3 V

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

EFM32TG225F16-BGA48

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Silicon Labs
📦 48-BGA (4 x 4 mm)
32-bit ARM Cortex-M3 microcontroller · Tiny Gecko · ARM Cortex-M3 · 32-bit · 32 MHz · 16 KB (16K x 8 bits) · 1.85 V to 3.8 V · 2.5 V or 3.3 V

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

EFM32TG825F32-BGA48T زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 32-bit ARM Cortex-M3 microcontroller
Series EFM32 Tiny Gecko
Maximum CPU Frequency 32 MHz
Processor Architecture ARM Cortex-M3, 32-bit RISC
Flash Memory 32 KB (32K x 8)
RAM 4 KB
Supply Voltage Range 1.85 V to 3.8 V
پیکیج 48-BGA (4 x 4 mm)
ماؤنٹنگ ٹائپ Surface mount
آپریٹنگ درجہ حرارت رینج -40 °C to +85 °C
LCD Controller 8 x 11 segments
Encryption Accelerator AES hardware accelerator
Operational Amplifiers 3 integrated operational amplifiers
Stop-Mode Current 0.6 µA
Run-Mode Current 150 µA/MHz
Core Instruction Set Performance Up to 1.25 Dhrystone MIPS/MHz

EFM32TG825F32-BGA48T 48-bga (4 x 4 mm) پن کنفیگریشن گائیڈ

EFM32TG825F32-BGA48T (48-bga (4 x 4 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

EFM32TG825F32-BGA48T کے لیے 48-bga (4 x 4 mm) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں EFM32TG825F32-BGA48T.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

EFM32TG825F32-BGA48T کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered IoT Sensor Nodes, Compact Medical Instruments, Industrial Monitoring and Automation, Secure Connected Equipment, LCD-Equipped User Interfaces, Portable Sensing and Measurement.

🧩

Battery-Powered IoT Sensor Nodes

The EFM32TG825F32-BGA48T fits compact wireless or wired sensor nodes because its 32-bit Cortex-M3 core operates up to 32 MHz while the Tiny Gecko family supports low-power states and autonomous peripheral operation. At 150 µA/MHz in Run mode and as little as 0.6 µA in Stop mode, it can reduce processor-active time when measurements and communications are intermittent. Its 32 KB Flash and 4 KB RAM support compact protocol stacks, while the small 4 x 4 mm 48-BGA package preserves board area.

💊

Compact Medical Instruments

The EFM32TG825F32-BGA48T is suitable for compact medical and diagnostic instruments that require deterministic embedded control in a limited footprint. Its 32 MHz Cortex-M3 processor handles local control and user-interface logic, while the three integrated operational amplifiers can support analog signal conditioning close to the sensor input. The 1.85 V to 3.8 V operating range fits low-voltage portable systems, and the 48-BGA package allows a small board. Medical qualification and regulatory suitability remain system-level responsibilities.

🏭

Industrial Monitoring and Automation

The EFM32TG825F32-BGA48T can serve as the local controller in industrial monitoring equipment where autonomous sensing, fast wake-up, and compact integration are valuable. The 32 MHz Cortex-M3 core is sufficient for event-driven control, data acquisition, and communication handling, while the 4 KB RAM supports short control loops and buffering. Its 48-BGA package reduces PCB area, and the -40 °C to +85 °C operating range suits industrial equipment. Designers should provide appropriate power regulation, isolation, and environmental protection.

🌐

Secure Connected Equipment

The EFM32TG825F32-BGA48T suits secure connected equipment because its hardware AES accelerator can perform supported encryption operations efficiently within the microcontroller. The 32 KB Flash and 4 KB RAM provide room for firmware, device identity, and short protocol buffers, while the 32 MHz Cortex-M3 core supports network control and status handling. The small 48-BGA package also helps designers retain compact industrial or appliance form factors. Key provisioning, certificate storage, update procedures, and security certification must be addressed at system level.

📺

LCD-Equipped User Interfaces

The EFM32TG825F32-BGA48T is well matched to compact LCD user interfaces because the device includes an 8 x 11 LCD controller alongside a 32 MHz Cortex-M3 processor. This integration allows a control panel to manage display segments, buttons, indicators, and local logic without dedicating a separate display controller. The 4 KB RAM and 32 KB Flash are suitable for menu and status firmware, while the 48-BGA footprint supports dense handheld or instrument layouts. Display voltage, bias, segment mapping, and glass requirements must match the manufacturer interface specifications.

📱

Portable Sensing and Measurement

The EFM32TG825F32-BGA48T supports portable measurement products that combine low power, analog capability, and compact packaging. The three integrated operational amplifiers can handle local amplification or signal conditioning for low-frequency sensors, reducing discrete-component count in appropriate designs. The Cortex-M3 core performs acquisition sequencing and calibration, while Stop mode can lower consumption between measurements. The 1.85 V to 3.8 V supply range and 4 x 4 mm 48-BGA package are advantageous in wearables, portable test equipment, and handheld analyzers, although precision and noise performance depend on the selected external network.

What is the EFM32TG825F32-BGA48T?
The EFM32TG825F32-BGA48T is a Silicon Labs 32-bit ARM Cortex-M3 Tiny Gecko microcontroller rated for operation up to 32 MHz. It integrates 32 KB of Flash, 4 KB of RAM, an 8 x 11 LCD controller, AES acceleration, and three operational amplifiers in a 48-BGA package. According to the Silicon Labs EFM32TG data sheet, the device is intended for low-power embedded applications.
What is the operating voltage of EFM32TG825F32-BGA48T?
The EFM32TG825F32-BGA48T operates from 1.85 V to 3.8 V. This range is stated in the EFM32TG825F32-BGA48T technical specifications and is suitable for low-voltage embedded systems using 2.5 V or 3.3 V rails. The board should maintain decoupling close to the supply pins and observe the manufacturer limits for each I/O domain.
How much Flash and RAM does EFM32TG825F32-BGA48T have?
The EFM32TG825F32-BGA48T contains 32 KB of Flash organized as 32K x 8 and 4 KB of RAM. DigiKey and Mouser list the same memory configuration for the device. The 32 KB Flash capacity is appropriate for compact firmware, while the 4 KB RAM budget should be checked carefully against stack, display buffers, and communication working memory.
Where can I download the EFM32TG825F32-BGA48T datasheet PDF?
The official EFM32TG825F32-BGA48T datasheet is the Silicon Labs EFM32TG data sheet at silabs.com/documents/public/data-sheets/efm32tg-datasheet.pdf. It describes the shared EFM32TG family, including the Cortex-M3 core, low-power behavior, peripherals, memory, and electrical characteristics. Use the package-specific pin table and errata when finalizing a PCB.
Where can I find the EFM32TG825F32-BGA48T pinout?
The EFM32TG825F32-BGA48T pinout is located in the pin-description section of the Silicon Labs EFM32TG data sheet. The device uses a 48-BGA footprint with a 4 x 4 mm body, so assignments must follow the exact ball map for this ordering code. Use the manufacturer pin table for PCB tracks, exposed connections, power rails, ground balls, and programming or debug functions.
Is EFM32TG825F32-BGA48T suitable for battery-powered products?
Yes, the EFM32TG825F32-BGA48T is suitable for battery-powered embedded products because the EFM32TG family supports low-power operation and autonomous peripherals. The manufacturer lists consumption as low as 0.6 µA in Stop mode and 150 µA/MHz in Run mode. Actual battery life depends on the selected duty cycle, sleep duration, radio activity, sensor load, and regulator efficiency.
What is the difference between EFM32TG825F32-BGA48T and EFM32TG225F32-BGA48?
The EFM32TG825F32-BGA48T and EFM32TG225F32-BGA48 are closely related 48-BGA Tiny Gecko devices, but their integrated feature sets and device positioning differ. The EFM32TG825F32-BGA48T is specifically identified with an 8 x 11 LCD controller, AES acceleration, and three operational amplifiers. The TG225 comparison should be checked against every required peripheral before replacement.
Can EFM32TG225F32-BGA48 replace EFM32TG825F32-BGA48T?
EFM32TG225F32-BGA48 can be considered for a board-level redesign only after its complete peripheral configuration and pin assignments have been compared with the EFM32TG825F32-BGA48T. Both are 48-BGA Tiny Gecko devices with 32 KB Flash and 4 KB RAM, but the TG225 does not automatically provide the TG825's stated LCD controller, AES accelerator, and three operational amplifiers.
What is the best drop-in replacement for EFM32TG825F32-BGA48T?
EFM32TG225F32-BGA48 is the closest same-brand 48-BGA candidate in the cross-reference results, but it is not a universal substitute because peripheral requirements can differ. A true drop-in decision requires confirming the ball map, supply pins, LCD interface, analog channels, AES hardware, clocking, and programming connections. Firmware may also require migration if peripheral registers or startup behavior differ.
When should I choose EFM32TG825F32-BGA48T over EFM32TG225F32-BGA48?
Choose the EFM32TG825F32-BGA48T when the design needs its documented 8 x 11 LCD controller, AES hardware accelerator, and three integrated operational amplifiers in a compact 48-BGA package. Choose EFM32TG225F32-BGA48 instead when its documented peripherals satisfy the application and offer a more appropriate feature-to-cost balance. Verify the complete pin and peripheral map before deciding.
Is EFM32TG825F32-BGA48T suitable for an LCD user interface?
Yes, the EFM32TG825F32-BGA48T is suitable for compact LCD user interfaces because its feature list includes an 8 x 11 LCD controller. This can simplify display designs by reducing external driver-interface requirements. The selected LCD must still be checked for electrical compatibility, segment count, bias requirements, and the complete pin assignment in the manufacturer documentation.
Does EFM32TG825F32-BGA48T include hardware AES encryption?
Yes, the EFM32TG825F32-BGA48T includes an AES hardware accelerator according to the Mouser product listing and manufacturer-family information. Hardware acceleration can reduce the processing burden of supported encryption operations compared with a software-only implementation. The final firmware must still use approved algorithms, proper key handling, and the device-specific peripheral configuration.
Where can I buy EFM32TG825F32-BGA48T and what is the current price?
Use the Request a Quote form on this page to check availability, current unit pricing, quantity breaks, and lead time for the EFM32TG825F32-BGA48T. The exact order code includes the 48-BGA package and tray packaging, so confirm those identifiers before requesting a quotation. Commercial terms can change with quantity, inventory, and packaging requirements.
What is the lead time and stock status of EFM32TG825F32-BGA48T?
Current stock status and lead time for EFM32TG825F32-BGA48T should be requested through the Request a Quote form on this page. The listing identifies the exact MPN as a 48-BGA, 4 x 4 mm device with tray packaging. Confirm required quantity, production schedule, and permissible date codes with the supplier when placing the order.
How does the EFM32TG825F32-BGA48T support low-power design?
The EFM32TG825F32-BGA48T supports low-power design through energy-aware operation, sleep states, fast wake-up behavior, and autonomous peripherals. Silicon Labs lists consumption as low as 0.6 µA in Stop mode and 150 µA/MHz in Run mode. Peripherals can perform routine tasks while the processor sleeps, reducing the time the CPU must remain active.
What are the key specifications of EFM32TG825F32-BGA48T that engineers should know?
The key specifications are a 32 MHz ARM Cortex-M3 core, 32 KB of Flash, 4 KB of RAM, a 1.85 V to 3.8 V supply range, and a 48-BGA 4 x 4 mm package. The device also includes an 8 x 11 LCD controller, AES acceleration, and three operational amplifiers. According to the Silicon Labs EFM32TG data sheet, the family supports Stop-mode current as low as 0.6 µA.

کے لیے انجینئرنگ ریفرنس ڈیٹا EFM32TG825F32-BGA48T — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the EFM32TG825F32-BGA48T when a design specifically needs its documented combination of a 32 MHz Cortex-M3 core, 32 KB Flash, 4 KB RAM, an 8 x 11 LCD controller, AES acceleration, and three operational amplifiers. It is well suited to compact, low-power instruments and connected products where analog integration and board area matter. EFM32TG225F32-BGA48 is a close same-footprint alternative when its peripheral configuration satisfies the design, but it must be checked against LCD, security, and analog requirements. The 16 KB Flash alternatives reduce available firmware and data space by 50 percent, making them suitable only when code size is comfortably within budget and the required peripherals remain available. For every candidate, verify the exact 48-BGA ball map, supply domains, programming connections, and firmware compatibility before treating it as a drop-in replacement.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ EFM32TG225F32-BGA48 EFM32TG825F16-BGA48T EFM32TG225F16-BGA48
Package 48-BGA (4 x 4 mm) 48-BGA (4 x 4 mm) 48-BGA (4 x 4 mm) 48-BGA (4 x 4 mm)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Processor ARM Cortex-M3, 32-bit RISC ARM Cortex-M3, 32-bit RISC ARM Cortex-M3, 32-bit RISC ARM Cortex-M3, 32-bit RISC
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 32 KB (32K x 8) 32 KB 16 KB 16 KB
RAM 4 KB 4 KB 4 KB 4 KB

اہم امتیازی خصوصیات

  • Higher Flash capacity than the 16 KB alternatives (بمقابلہEFM32TG825F16-BGA48T)
  • Retains the full 32 KB Flash configuration (بمقابلہEFM32TG225F32-BGA48)
  • Integrated analog resources reduce external component demand (بمقابلہEFM32TG225F32-BGA48)
  • Compact 4 x 4 mm package supports space-constrained assemblies (بمقابلہEFM32TG225F16-BGA48)

ڈیزائن نوٹس

The 48-BGA package has a 4 x 4 mm body and requires a manufacturing process capable of routing the specified ball pitch and creating any required escape vias. Preserve the manufacturer land pattern, place decoupling capacitors beside the relevant supply balls, and avoid long return paths between the MCU and analog circuitry. Validate escape routing, solder-mask definition, and assembly inspection requirements before releasing the PCB.

Design the supply network for the documented 1.85 V to 3.8 V operating range. Place bulk and high-frequency decoupling close to the power and ground balls, maintain a low-impedance ground reference, and check each external signal against the applicable I/O voltage domain. The MCU can enter Stop mode at currents as low as 0.6 µA, so rail leakage from the regulator, pull resistors, sensors, and pull-up networks can dominate the sleep budget.

Keep the three integrated operational amplifiers close to their source and destination nodes to minimize sensitive-node trace length and parasitic capacitance. Separate analog inputs from switching supplies, radio outputs, and fast digital clock routes. Connect ground balls using the recommended layer stack and return-path arrangement, and evaluate the analog performance with actual sensor impedance and frequency rather than relying only on general layout conventions.

Do not treat a matching 48-BGA body as proof of interchangeable silicon. Confirm the complete ball map, supply pins, ground assignments, LCD interface, ADC and operational-amplifier channels, AES availability, debug signals, and boot or programming connections. When reducing Flash from 32 KB to 16 KB, also verify linker-map size, bootloader requirements, firmware update space, and application data storage before approving the substitution.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No product-specific environmental or material compliance declarations were identified in the cited device pages. Qualification for automotive, industrial, or medical use must be assessed separately.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-20 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

EFM32TG825F32-BGA48T datasheet EFM32TG825F32-BGA48T pinout EFM32TG825F32-BGA48T specifications EFM32TG825F32-BGA48T equivalent EFM32TG825F32-BGA48T replacement EFM32TG825F32-BGA48T cross reference EFM32TG825F32-BGA48T price EFM32TG825F32-BGA48T stock Silicon Labs EFM32TG825F32-BGA48T EFM32TG825F32-BGA48T vs EFM32TG225F32-BGA48 EFM32TG825F32-BGA48T application circuit 48-BGA Cortex-M3 microcontroller 32MHz

متعلقہ اجزاء اور اصطلاحات

Silicon Labs EFM32TG825F32-BGA48T EFM32TG225F32-BGA48 EFM32TG825F16-BGA48T EFM32TG225F16-BGA48 EFM32 Tiny Gecko ARM Cortex-M3 32-bit RISC processor microcontroller MCU embedded system system-on-chip 48-BGA BGA package family surface mount 32 KB Flash 4 KB SRAM 1.85 V to 3.8 V 8 x 11 LCD controller AES hardware accelerator operational amplifier low-power mode battery-powered device industrial automation medical instrument
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں