EFM32TG840F16-D-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG840F16-D-QFN64 ✗ Son Kullanım ZamanıEFM32TG840F16-D-QFN64 Genel Bakış
A microcontroller such as the EFM32TG840F16-D-QFN64 is a complete programmable control component containing a processor core, Flash program memory, RAM, digital I/O, timers, and communication interfaces. Its operating role is broadly defined as an embedded control IC, while the EFM32TG840F16-D-QFN64 specifically belongs to the ARM Cortex-M3 MCU, 32-bit microcontroller, and energy-efficient embedded-controller categories. This hierarchy makes the device suitable for applications in which local sensing, control, communications, and low standby consumption are required within one package.
Key features include 16 kB of Flash for firmware storage, 4 kB of RAM for working memory, 56 digital I/O pins, and two 16-bit timers. The manufacturer describes the Tiny Gecko platform as using innovative low-energy techniques, fast wake-up times, and energy-saving modes. These characteristics help reduce the energy required between active processing intervals and are valuable in systems that spend substantial time in low-power states. The operating supply range is listed as 1.98 V to 3.8 V, supporting both 2.5 V and 3.3 V system rails.
The EFM32TG840F16-D-QFN64 uses an ARM Cortex-M3 processor core and is positioned for compact, low-power embedded control rather than high-compute applications. Its 64-QFN exposed-pad package provides a small 9 x 9 mm outline and 56 digital I/O pins for external sensors, indicators, control logic, and communications. The exposed pad should be connected to the appropriate ground plane according to the manufacturer’s land-pattern and thermal guidance. A separate low-power mode figure of 0.6 microampere and a Run-mode figure of 150 microamps per megahertz are listed for the EFM32TG family, making the low-power architecture especially relevant to battery-operated products.
Typical uses include wearable and health-monitoring devices, industrial sensors, building controls, portable instrumentation, connected low-power nodes, and embedded consumer products. In a wearable sensor, the MCU can process local measurements and use a sleep mode between activity periods. In an industrial node, the 56 I/O pins can support sensors, switches, indicators, and communication interfaces while the Cortex-M3 core handles control logic. The 32 MHz clock speed provides sufficient processing performance for many real-time control and protocol tasks.
When designing a PCB around the EFM32TG840F16-D-QFN64, follow the manufacturer’s pin description and package drawing for every connection, especially the exposed pad, power pins, ground pins, and debug signals. Place decoupling capacitors close to the supply pins and preserve the specified trace geometry. For firmware development, confirm the exact silicon revision, memory map, startup sequence, and peripheral configuration with the manufacturer’s EFM32TG840 documentation. This page combines the device’s core specifications, drop-in alternatives, application guidance, and practical design notes to support component selection and board development.
Drop-in alternatifler için EFM32TG840F16-D-QFN64 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller EFM32TG840F16-D-QFN64 (aynı form faktörü ve ayağa oturma) — farklı olan Flash Memory, Package, Product Type, Architecture, Low-Power Features.
EFM32TG840F8-QFN64
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →EFM32TG840F32-QFN64
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →EFM32LG840F64-QFN64
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →EFM32TG840F16-D-QFN64 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Processor Core | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 kB |
| RAM Memory | 4 kB |
| Digital I/O Pins | 56 |
| Timer Count | 2 x 16-bit |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Nominal Supply Configurations | 2.5 V and 3.3 V |
| Düşük Güç Modu Akımı | 0.6 uA |
| Run Mode Current | 150 uA/MHz |
| Architecture | 32-bit RISC |
| MCU Family | EFM32 Tiny Gecko |
| Paket | 64-QFN exposed-pad, 9 x 9 mm |
| Montaj Türü | Surface mount |
| Program Memory Organization | 16K x 8 |
| RAM Organization | 4K x 8 |
| RoHS Durumu | Compliant |
EFM32TG840F16-D-QFN64 64-qfn exposed-pad, 9 x 9 mm Pin Yapısı Kılavuzu
EFM32TG840F16-D-QFN64 (64-qfn exposed-pad, 9 x 9 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: EFM32TG840F16-D-QFN64.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
EFM32TG840F16-D-QFN64 için uygundur 6 uygulamas: Battery-Powered Sensor Node, Industrial Condition Monitoring, Low-Power Wearable Electronics, Building Automation Controller, Portable Test and Measurement Instrument, Connected Energy-Saving Controller.
Battery-Powered Sensor Node
The EFM32TG840F16-D-QFN64 fits compact sensor nodes because its 32 MHz Cortex-M3 core can perform local filtering and control while the Tiny Gecko platform supports fast wake-up and energy-saving modes. The listed Stop-mode current of 0.6 uA is especially relevant when the node spends most of its time between measurements. Its 16 kB Flash holds application firmware, and 4 kB RAM provides working space for buffers and state. The 56 digital I/O pins can connect sensing switches, indicators, and interface signals. In a battery design, use a regulator suitable for the 1.98 V to 3.8 V operating range and evaluate radio, sensor, and MCU loads across the complete duty cycle rather than relying only on the sleep-state figure.
Önerilen
Industrial Condition Monitoring
For industrial condition monitoring, the EFM32TG840F16-D-QFN64 combines a 32-bit Cortex-M3 processor with 56 digital I/O pins and two 16-bit timers. It can supervise switches, sensors, and local alarms without adding a separate host processor. The 16 kB Flash and 4 kB RAM are suitable for compact signal-processing and event-logging firmware, while the 1.98 V to 3.8 V range supports low-voltage industrial boards. Low-power modes help reduce energy when the monitored equipment is idle. The device should be paired with protected input conditioning and an isolated or properly referenced communication interface when connected to industrial wiring, because sensor protection, surge immunity, and grounding are separate PCB-level requirements.
Önerilen
Low-Power Wearable Electronics
The EFM32TG840F16-D-QFN64 is well suited to wearable electronics that periodically sample sensors and then return to a low-power state. Its Cortex-M3 core runs up to 32 MHz, while fast wake-up behavior can shorten the active interval needed to acquire and process data. The EFM32TG platform lists consumption as low as 0.6 uA in Stop mode, and the compact 9 x 9 mm QFN helps reduce board area in a small enclosure. The 56 I/O pins provide flexible connections to sensors, haptic drivers, and status indicators. A wearable implementation still needs careful battery-current budgeting, antenna coexistence, and analog-sensor conditioning; low MCU consumption does not eliminate the power consumed by the radio, display, or sensor.
Önerilen
Building Automation Controller
The EFM32TG840F16-D-QFN64 can serve as a low-power controller in a building automation node controlling lights, access inputs, or occupancy-related equipment. Its 56 digital I/O pins provide substantial connection capacity for switches, relay-control signals, and status feedback, while the two 16-bit timers support periodic measurement or output timing tasks. The 32 MHz Cortex-M3 core is more than adequate for simple protocol handling and state-machine control. Its 1.98 V to 3.8 V operating range allows integration with low-voltage power rails. For long cable runs and inductive loads, add suitable protection and drive circuitry; the MCU itself is a logic controller rather than a power-switching device.
Önerilen
Portable Test and Measurement Instrument
A compact logger or portable measurement instrument can use the EFM32TG840F16-D-QFN64 as its local control processor. The 32-bit Cortex-M3 core handles sampling coordination, calculations, menus, and data transfer, while 16 kB Flash stores firmware and 4 kB RAM supports temporary measurement and communication buffers. Two 16-bit timers are useful for periodic sampling or pulse timing, and the 56 I/O pins can connect displays, buttons, sensors, and interface transceivers. Low-power operation helps extend instrument runtime, although display and analog front-end consumption may dominate. Board design should separate sensitive analog inputs from digital switching paths and use the manufacturer’s grounding and decoupling guidance.
Önerilen
Connected Energy-Saving Controller
The EFM32TG840F16-D-QFN64 is appropriate for a connected energy-management controller that coordinates local loads and communicates status to a remote system. The 16 kB Flash and 4 kB RAM are suitable for protocol handling and compact application logic, while 56 I/O pins allow connection of metering inputs, relay-control outputs, and status LEDs. Low-power modes help when the controller is idle, and the 32 MHz Cortex-M3 core provides deterministic performance for real-time peripheral coordination. Use appropriate isolation, relay-driver, and surge-protection circuits around mains-connected or long-wire interfaces. The MCU’s role is to supervise the energy path, so compliance of the complete product depends on the external power and communications hardware.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: EFM32TG840F16-D-QFN64 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | EFM32TG840F8-QFN64 | EFM32TG840F32-QFN64 | EFM32LG840F64-QFN64 |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-QFN (9x9) | 64-QFN (9x9) | 64-QFN (9x9) | 64-QFN (9x9) |
| Flash Memory | 16 kB | 8 kB | 32 kB | 64 kB |
Ana Farklılayıcılar
- Balanced embedded memory configuration (karşılaştırma:EFM32TG840F8-QFN64)
- Lower flash requirement than the F32 variant (karşılaştırma:EFM32TG840F32-QFN64)
- Explicit low-power operating characteristics (karşılaştırma:EFM32LG840F64-QFN64)
Tasarım Notları
Use the exact EFM32TG840 64-QFN 9 x 9 mm land pattern and pin-description table when assigning nets. Pay particular attention to the exposed pad, which normally serves a thermal and electrical connection according to the manufacturer drawing. Place all bypass capacitors adjacent to the associated power pins, with the shortest practical return path to the ground plane. Do not derive connections from a generic 64-QFN symbol because exposed-pad and thermal-pad treatment must match the package drawing.
Design the supply for the documented 1.98 V to 3.8 V operating range and verify startup, voltage tolerance, and load-transient behavior at both 2.5 V and 3.3 V if those rails are intended. The family’s low Stop-mode current of 0.6 uA does not represent total system consumption. Budget the MCU, sensors, radio, pull networks, indicator LEDs, and regulator quiescent current over the complete operating cycle.
Separate sensitive analog inputs and external clock circuitry from fast digital return paths. Route the exposed pad into an uninterrupted ground region where the package layout permits, while observing the manufacturer’s thermal-pad and via recommendations. If the board includes RF, Ethernet, switching regulators, or high-current outputs, review coupling paths during schematic review as well as after layout. The 56 available I/O pins should be assigned early so differential pairs and sensitive pins are not forced into awkward locations.
Do not assume that another EFM32TG840 memory-density variant is firmware-compatible without checking the image size, linker map, startup code, and peripheral configuration. Moving from the F16 device to the F8 option reduces Flash from 16 kB to 8 kB and RAM from 4 kB to 2 kB. A successful PCB fit alone does not establish functional equivalence; validate the complete firmware and all pin-multiplexing requirements on the actual replacement silicon.
Uyumluluk Bilgisi
RoHS compliance is identified by the manufacturer product information. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is stated for this exact MPN.