EFM32TG842F8-D-QFP64R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)
MPN: EFM32TG842F8-D-QFP64R ⚠ Son Satın AlmaEFM32TG842F8-D-QFP64R Genel Bakış
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The EFM32 Tiny Gecko family belongs to the hierarchy of 32-bit MCU, embedded processor, microcontroller, and semiconductor. It is designed for compact products that require deterministic control, flexible peripheral routing, and low-energy operation without a separate external memory bus.
The device provides 2 timers with 16-bit counters, configurable peripheral I/O locations, fast wake-up behavior, and energy-saving operating modes. Its 8 KB Flash stores firmware while 2 KB of RAM supports working data and stack operations. The 53 digital I/O pins provide connections for sensors, actuators, indicators, communications, and control logic. These features make the MCU suitable for energy-sensitive monitoring, industrial control, and connected embedded equipment.
The EFM32 architecture combines an ARM Cortex-M3 32-bit RISC processor with configurable peripherals and energy-management hardware. According to the manufacturer datasheet, the Cortex-M3 core can achieve as much as 1.25 Dhrystone MIPS per MHz, while a Memory Protection Unit supports up to eight memory segments. A Wake-up Interrupt Controller handles events occurring while the processor is asleep, supporting responsive operation without continuous active processing.
Typical uses include low-power sensor nodes, compact industrial controllers, energy-harvesting equipment, building controls, and connected IoT terminals. The device can serve systems that repeatedly sleep between measurements, wake for a task, process peripheral data, and return to a low-power state. Its 53 I/O pins also reduce the need for an external I/O expander in moderately connected designs.
PCB implementation requires careful decoupling, clock planning, and exposed-pad layout according to the manufacturer package guidance. Place the recommended input and bypass capacitors close to their corresponding supply pins, route sensitive clock and reset signals away from fast-switching nodes, and provide a continuous ground reference. Firmware selection must also account for the 8 KB Flash limit and the specific peripheral set of the chosen device variant.
This page consolidates the key electrical, memory, timing, package, and lifecycle characteristics of the EFM32TG842F8-D-QFP64R, compares same-family hardware options, and provides practical guidance for firmware, PCB, and sourcing decisions.
Drop-in alternatifler için EFM32TG842F8-D-QFP64R — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller EFM32TG842F8-D-QFP64R (aynı form faktörü ve ayağa oturma) — farklı olan Flash Memory, Package, Processor Core, RAM.
EFM32TG842F64-QFP64
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
EFM32TG842F32-QFP64
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →EFM32TG841F8-QFP64
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
EFM32TG840F8-QFP64
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
EFM32TG841F32-QFP64
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
EFM32TG842F8-D-QFP64R Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Processor Core | ARM Cortex-M3 |
| Instruction Set | 32-bit RISC |
| Flash Memory | 8 KB (8K x 8) |
| RAM | 2 KB |
| Digital I/O Pins | 53 pins |
| Timers | 2 x 16-bit timers |
| İşletim Besleme Gerilimi | 1.98 V to 3.8 V |
| Paket | 64-TQFP (10 mm x 10 mm) |
| Pin Sayısı | 64 pins |
| Montaj Türü | Surface mount |
| Peripheral I/O | Configurable peripheral I/O locations |
| Memory Protection Unit | Up to 8 memory segments |
| Wake-up Interrupt Controller | Yes |
| Low-Power Features | Fast wake-up and energy-saving modes |
| Processor Performance | Up to 1.25 Dhrystone MIPS/MHz |
| RoHS Durumu | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
EFM32TG842F8-D-QFP64R 64-tqfp (10 mm x 10 mm) Pin Yapısı Kılavuzu
EFM32TG842F8-D-QFP64R (64-tqfp (10 mm x 10 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: EFM32TG842F8-D-QFP64R.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
EFM32TG842F8-D-QFP64R için uygundur 6 uygulamas: Low-Power Sensor Monitoring, Industrial Control Module, Energy-Saving IoT Terminal, Connected Home Controller, Building Automation Node, Battery-Powered Portable Instrument.
Low-Power Sensor Monitoring
The EFM32TG842F8-D-QFP64R fits compact sensor-monitoring nodes because its 32 MHz ARM Cortex-M3 core provides responsive sampling and local processing while the Tiny Gecko platform supports fast wake-up and energy-saving modes. The device can sleep between measurements, handle a sensor interrupt through its Wake-up Interrupt Controller, and process the event without leaving the low-power operating mode active. Its 8 KB Flash and 2 KB RAM suit small data-acquisition loops, threshold logic, and lightweight filtering. The 53 digital I/O pins support digital sensors, status indicators, and alarm outputs. Firmware size must remain within the 8 KB Flash limit, so larger protocol stacks or historical data storage may require a higher-memory family member.
Önerilen
Industrial Control Module
The EFM32TG842F8-D-QFP64R is suitable for a compact industrial control module when the design requires deterministic 32-bit processing, multiple digital connections, and low-power operation. Its two 16-bit timers can support periodic control tasks, input capture, or output timing, while configurable peripheral I/O allows signals to be routed efficiently on the 64-pin TQFP footprint. The 53 digital I/O pins can connect discrete sensors, relay-control stages, status LEDs, and inter-module interfaces. A 1.98 V to 3.8 V operating range supports low-voltage industrial logic, but isolation, surge protection, and grounding remain external design requirements. Firmware should be checked against the 8 KB Flash and 2 KB RAM limits before production release.
Önerilen
Energy-Saving IoT Terminal
The EFM32TG842F8-D-QFP64R supports energy-saving IoT terminals that spend substantial time between short processing and communications windows. Its ARM Cortex-M3 core operates up to 32 MHz, allowing the firmware to perform protocol handling, sensor conditioning, and local state management at a relatively low clock rate. Fast wake-up and energy-saving modes reduce unnecessary active time, while the 53 digital I/O pins simplify connections to radios, indicators, and environmental sensors. The 2 KB RAM is adequate for lightweight packet staging and state tracking but not for large local buffers. Choose the larger-Flash family variant when secure updates, rich telemetry formatting, or multiple protocol stacks increase firmware requirements.
Önerilen
Connected Home Controller
The EFM32TG842F8-D-QFP64R can serve as a connected-home controller for local lighting, occupancy, access, or environmental-control functions. Its 53 digital I/O pins provide enough parallel connections for input sensors, pushbuttons, relay-control signals, and status indicators without requiring a large external I/O expander. The two 16-bit timers are useful for debouncing timing, dimming sequences, or periodic actuator updates. Fast wake-up behavior lets the controller respond to an event without continuously running the CPU. Because Flash is limited to 8 KB and RAM to 2 KB, the firmware should use compact protocols and avoid storing large historical datasets locally. For richer wireless stacks or extensive schedules, move to a higher-memory Tiny Gecko option.
Önerilen
Building Automation Node
The EFM32TG842F8-D-QFP64R is appropriate for a low-power building-automation node controlling HVAC inputs, occupancy signals, light interfaces, or local equipment status. Its configurable peripheral I/O and 53 digital I/O pins help reduce the logic footprint, while the 32 MHz Cortex-M3 processor can execute control rules between longer sleep intervals. The operating range of 1.98 V to 3.8 V fits low-voltage sensor and interface circuits when the board power tree is designed consistently. Two 16-bit timers support timing functions such as occupancy timeouts and periodic polling. Do not connect mains-voltage signals directly to the MCU; use appropriately isolated and protected external interfaces. Validate timing behavior and memory usage across the complete firmware build.
Önerilen
Battery-Powered Portable Instrument
The EFM32TG842F8-D-QFP64R can control a battery-powered portable instrument that prioritizes low active energy and fast response. The 32 MHz Cortex-M3 core handles measurement control and user-interface logic, while Tiny Gecko sleep modes reduce consumption during idle periods. Its 53 digital I/O pins can support buttons, displays, status indicators, and external measurement-device control, although analog front-end components remain separate. The 8 KB Flash and 2 KB RAM constrain display rendering and data buffering, making a memory-efficient event-driven architecture important. Confirm battery-voltage margins across temperature, validate wake sources, and test the complete power budget before choosing production quantities. A higher-memory variant may be preferable for graph storage or elaborate user interfaces.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: EFM32TG842F8-D-QFP64R — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | EFM32TG842F64-QFP64 | EFM32TG842F32-QFP64 | EFM32TG841F8-QFP64 | EFM32TG840F8-QFP64 | EFM32TG841F32-QFP64 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 8 KB | 64 KB | 32 KB | 8 KB | 8 KB | 32 KB |
| RAM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| Low-Power Operation | Fast wake-up and energy-saving modes | Fast wake-up and energy-saving modes | Fast wake-up and energy-saving modes | Fast wake-up and energy-saving modes | Fast wake-up and energy-saving modes | Fast wake-up and energy-saving modes |
Ana Farklılayıcılar
- Retains the 8 KB Flash configuration while offering larger-memory alternatives (karşılaştırma:EFM32TG842F32-QFP64)
- Matches the full TG842 peripheral family while increasing firmware capacity (karşılaştırma:EFM32TG842F64-QFP64)
- Uses 53 digital I/O pins in a compact 10 mm by 10 mm package (karşılaştırma:EFM32TG840F8-QFP64)
- Combines a 32 MHz Cortex-M3 with fast wake-up low-energy operation (karşılaştırma:EFM32TG841F8-QFP64)
Tasarım Notları
Place all required bypass capacitors immediately adjacent to their corresponding supply and ground pins, using short ground returns rather than routing return current through distant plane areas. Follow the manufacturer recommended capacitor values, voltage ratings, and placement. Separate analog-sensitive inputs from switching-node traces if the board also contains power converters. The 53 I/O pins provide flexibility, but unused pins should be handled according to the device's termination guidance rather than left as uncontrolled antennae.
Route the external crystal or clock source as a short, continuous path away from high-current switching traces and noisy interface signals. Keep the oscillator loop compact and preserve a continuous ground reference beneath clock circuitry. Because the Tiny Gecko platform emphasizes fast wake-up, clock stability and startup behavior are central to deterministic low-power operation. Validate the final layout with an oscilloscope for clock amplitude, startup settling, and unwanted coupling under the worst-case system power state.
Design the 1.98 V to 3.8 V supply so it remains within the operating limits at the MCU pins during load changes, battery discharge, and peripheral transients. Decoupling requirements must follow the manufacturer datasheet rather than generic bulk-capacitor assumptions. For battery-powered products, calculate the average current using the active workload, standby current, wake duration, and radio activity. Treat that calculation as an estimate until it is confirmed on finished hardware under each relevant operating mode.
Do not confuse a larger-Flash sibling with a functional substitute: changing from F8 to F32 or F64 can alter the memory map, linker limits, startup configuration, and device identifier. Likewise, TG840, TG841, and TG842 parts may retain the 64-pin footprint while providing different peripheral combinations. Before replacing EFM32TG842F8-D-QFP64R, compare the complete pin-description table, clock tree, interrupt vector, timers, communication blocks, Flash algorithm, and boot configuration in the manufacturer documentation.
The principal thermal concern is normal I/O and core dissipation rather than power-semiconductor safe-operating-area behavior. Use the manufacturer's recommended land pattern and thermal-via arrangement for the TQFP-64 exposed pad. Keep copper available for heat spreading without compromising signal integrity. Because no SOA applies to this microcontroller, use the package thermal data and measured board temperature for thermal qualification rather than applying a power-device SOA criterion.
Uyumluluk Bilgisi
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for the target MPN. AEC-Q100 is not applicable because this is an industrial and embedded microcontroller rather than an automotive-qualified device.