EFM32TG842F8-D-QFP64R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)
MPN: EFM32TG842F8-D-QFP64R ⚠ רכישה אחרונהEFM32TG842F8-D-QFP64R סקירה
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The EFM32 Tiny Gecko family belongs to the hierarchy of 32-bit MCU, embedded processor, microcontroller, and semiconductor. It is designed for compact products that require deterministic control, flexible peripheral routing, and low-energy operation without a separate external memory bus.
The device provides 2 timers with 16-bit counters, configurable peripheral I/O locations, fast wake-up behavior, and energy-saving operating modes. Its 8 KB Flash stores firmware while 2 KB of RAM supports working data and stack operations. The 53 digital I/O pins provide connections for sensors, actuators, indicators, communications, and control logic. These features make the MCU suitable for energy-sensitive monitoring, industrial control, and connected embedded equipment.
The EFM32 architecture combines an ARM Cortex-M3 32-bit RISC processor with configurable peripherals and energy-management hardware. According to the manufacturer datasheet, the Cortex-M3 core can achieve as much as 1.25 Dhrystone MIPS per MHz, while a Memory Protection Unit supports up to eight memory segments. A Wake-up Interrupt Controller handles events occurring while the processor is asleep, supporting responsive operation without continuous active processing.
Typical uses include low-power sensor nodes, compact industrial controllers, energy-harvesting equipment, building controls, and connected IoT terminals. The device can serve systems that repeatedly sleep between measurements, wake for a task, process peripheral data, and return to a low-power state. Its 53 I/O pins also reduce the need for an external I/O expander in moderately connected designs.
PCB implementation requires careful decoupling, clock planning, and exposed-pad layout according to the manufacturer package guidance. Place the recommended input and bypass capacitors close to their corresponding supply pins, route sensitive clock and reset signals away from fast-switching nodes, and provide a continuous ground reference. Firmware selection must also account for the 8 KB Flash limit and the specific peripheral set of the chosen device variant.
This page consolidates the key electrical, memory, timing, package, and lifecycle characteristics of the EFM32TG842F8-D-QFP64R, compares same-family hardware options, and provides practical guidance for firmware, PCB, and sourcing decisions.
חלופות תחליף ישיר עבור EFM32TG842F8-D-QFP64R — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם EFM32TG842F8-D-QFP64R (אותו גורם צורה וטביעת רגל) — שונים ב Flash Memory, Package, Processor Core, RAM.
EFM32TG842F64-QFP64
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
EFM32TG842F32-QFP64
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←EFM32TG841F8-QFP64
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
EFM32TG840F8-QFP64
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
EFM32TG841F32-QFP64
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
EFM32TG842F8-D-QFP64R דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Processor Core | ARM Cortex-M3 |
| Instruction Set | 32-bit RISC |
| Flash Memory | 8 KB (8K x 8) |
| RAM | 2 KB |
| Digital I/O Pins | 53 pins |
| Timers | 2 x 16-bit timers |
| מתח אספקה פעיל | 1.98 V to 3.8 V |
| מארז | 64-TQFP (10 mm x 10 mm) |
| מספר פינים | 64 pins |
| סוג הרכבה | Surface mount |
| Peripheral I/O | Configurable peripheral I/O locations |
| Memory Protection Unit | Up to 8 memory segments |
| Wake-up Interrupt Controller | Yes |
| Low-Power Features | Fast wake-up and energy-saving modes |
| Processor Performance | Up to 1.25 Dhrystone MIPS/MHz |
| סטטוס RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
מדריך תצורת פינים של EFM32TG842F8-D-QFP64R 64-tqfp (10 mm x 10 mm)
תצורת פינים עבור EFM32TG842F8-D-QFP64R (מארזת 64-tqfp (10 mm x 10 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור EFM32TG842F8-D-QFP64R.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
EFM32TG842F8-D-QFP64R מתאים עבור 6 יישוםs: Low-Power Sensor Monitoring, Industrial Control Module, Energy-Saving IoT Terminal, Connected Home Controller, Building Automation Node, Battery-Powered Portable Instrument.
Low-Power Sensor Monitoring
The EFM32TG842F8-D-QFP64R fits compact sensor-monitoring nodes because its 32 MHz ARM Cortex-M3 core provides responsive sampling and local processing while the Tiny Gecko platform supports fast wake-up and energy-saving modes. The device can sleep between measurements, handle a sensor interrupt through its Wake-up Interrupt Controller, and process the event without leaving the low-power operating mode active. Its 8 KB Flash and 2 KB RAM suit small data-acquisition loops, threshold logic, and lightweight filtering. The 53 digital I/O pins support digital sensors, status indicators, and alarm outputs. Firmware size must remain within the 8 KB Flash limit, so larger protocol stacks or historical data storage may require a higher-memory family member.
מומלץ
Industrial Control Module
The EFM32TG842F8-D-QFP64R is suitable for a compact industrial control module when the design requires deterministic 32-bit processing, multiple digital connections, and low-power operation. Its two 16-bit timers can support periodic control tasks, input capture, or output timing, while configurable peripheral I/O allows signals to be routed efficiently on the 64-pin TQFP footprint. The 53 digital I/O pins can connect discrete sensors, relay-control stages, status LEDs, and inter-module interfaces. A 1.98 V to 3.8 V operating range supports low-voltage industrial logic, but isolation, surge protection, and grounding remain external design requirements. Firmware should be checked against the 8 KB Flash and 2 KB RAM limits before production release.
מומלץ
Energy-Saving IoT Terminal
The EFM32TG842F8-D-QFP64R supports energy-saving IoT terminals that spend substantial time between short processing and communications windows. Its ARM Cortex-M3 core operates up to 32 MHz, allowing the firmware to perform protocol handling, sensor conditioning, and local state management at a relatively low clock rate. Fast wake-up and energy-saving modes reduce unnecessary active time, while the 53 digital I/O pins simplify connections to radios, indicators, and environmental sensors. The 2 KB RAM is adequate for lightweight packet staging and state tracking but not for large local buffers. Choose the larger-Flash family variant when secure updates, rich telemetry formatting, or multiple protocol stacks increase firmware requirements.
מומלץ
Connected Home Controller
The EFM32TG842F8-D-QFP64R can serve as a connected-home controller for local lighting, occupancy, access, or environmental-control functions. Its 53 digital I/O pins provide enough parallel connections for input sensors, pushbuttons, relay-control signals, and status indicators without requiring a large external I/O expander. The two 16-bit timers are useful for debouncing timing, dimming sequences, or periodic actuator updates. Fast wake-up behavior lets the controller respond to an event without continuously running the CPU. Because Flash is limited to 8 KB and RAM to 2 KB, the firmware should use compact protocols and avoid storing large historical datasets locally. For richer wireless stacks or extensive schedules, move to a higher-memory Tiny Gecko option.
מומלץ
Building Automation Node
The EFM32TG842F8-D-QFP64R is appropriate for a low-power building-automation node controlling HVAC inputs, occupancy signals, light interfaces, or local equipment status. Its configurable peripheral I/O and 53 digital I/O pins help reduce the logic footprint, while the 32 MHz Cortex-M3 processor can execute control rules between longer sleep intervals. The operating range of 1.98 V to 3.8 V fits low-voltage sensor and interface circuits when the board power tree is designed consistently. Two 16-bit timers support timing functions such as occupancy timeouts and periodic polling. Do not connect mains-voltage signals directly to the MCU; use appropriately isolated and protected external interfaces. Validate timing behavior and memory usage across the complete firmware build.
מומלץ
Battery-Powered Portable Instrument
The EFM32TG842F8-D-QFP64R can control a battery-powered portable instrument that prioritizes low active energy and fast response. The 32 MHz Cortex-M3 core handles measurement control and user-interface logic, while Tiny Gecko sleep modes reduce consumption during idle periods. Its 53 digital I/O pins can support buttons, displays, status indicators, and external measurement-device control, although analog front-end components remain separate. The 8 KB Flash and 2 KB RAM constrain display rendering and data buffering, making a memory-efficient event-driven architecture important. Confirm battery-voltage margins across temperature, validate wake sources, and test the complete power budget before choosing production quantities. A higher-memory variant may be preferable for graph storage or elaborate user interfaces.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור EFM32TG842F8-D-QFP64R — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | EFM32TG842F64-QFP64 | EFM32TG842F32-QFP64 | EFM32TG841F8-QFP64 | EFM32TG840F8-QFP64 | EFM32TG841F32-QFP64 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 8 KB | 64 KB | 32 KB | 8 KB | 8 KB | 32 KB |
| RAM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| Low-Power Operation | Fast wake-up and energy-saving modes | Fast wake-up and energy-saving modes | Fast wake-up and energy-saving modes | Fast wake-up and energy-saving modes | Fast wake-up and energy-saving modes | Fast wake-up and energy-saving modes |
מבדילים עיקריים
- Retains the 8 KB Flash configuration while offering larger-memory alternatives (לעומתEFM32TG842F32-QFP64)
- Matches the full TG842 peripheral family while increasing firmware capacity (לעומתEFM32TG842F64-QFP64)
- Uses 53 digital I/O pins in a compact 10 mm by 10 mm package (לעומתEFM32TG840F8-QFP64)
- Combines a 32 MHz Cortex-M3 with fast wake-up low-energy operation (לעומתEFM32TG841F8-QFP64)
הערות תכנון
Place all required bypass capacitors immediately adjacent to their corresponding supply and ground pins, using short ground returns rather than routing return current through distant plane areas. Follow the manufacturer recommended capacitor values, voltage ratings, and placement. Separate analog-sensitive inputs from switching-node traces if the board also contains power converters. The 53 I/O pins provide flexibility, but unused pins should be handled according to the device's termination guidance rather than left as uncontrolled antennae.
Route the external crystal or clock source as a short, continuous path away from high-current switching traces and noisy interface signals. Keep the oscillator loop compact and preserve a continuous ground reference beneath clock circuitry. Because the Tiny Gecko platform emphasizes fast wake-up, clock stability and startup behavior are central to deterministic low-power operation. Validate the final layout with an oscilloscope for clock amplitude, startup settling, and unwanted coupling under the worst-case system power state.
Design the 1.98 V to 3.8 V supply so it remains within the operating limits at the MCU pins during load changes, battery discharge, and peripheral transients. Decoupling requirements must follow the manufacturer datasheet rather than generic bulk-capacitor assumptions. For battery-powered products, calculate the average current using the active workload, standby current, wake duration, and radio activity. Treat that calculation as an estimate until it is confirmed on finished hardware under each relevant operating mode.
Do not confuse a larger-Flash sibling with a functional substitute: changing from F8 to F32 or F64 can alter the memory map, linker limits, startup configuration, and device identifier. Likewise, TG840, TG841, and TG842 parts may retain the 64-pin footprint while providing different peripheral combinations. Before replacing EFM32TG842F8-D-QFP64R, compare the complete pin-description table, clock tree, interrupt vector, timers, communication blocks, Flash algorithm, and boot configuration in the manufacturer documentation.
The principal thermal concern is normal I/O and core dissipation rather than power-semiconductor safe-operating-area behavior. Use the manufacturer's recommended land pattern and thermal-via arrangement for the TQFP-64 exposed pad. Keep copper available for heat spreading without compromising signal integrity. Because no SOA applies to this microcontroller, use the package thermal data and measured board temperature for thermal qualification rather than applying a power-device SOA criterion.
מידע על תאימות
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for the target MPN. AEC-Q100 is not applicable because this is an industrial and embedded microcontroller rather than an automotive-qualified device.