Silicon Labs

EFM32ZG222F32-B-QFP48 - 24MHz Cortex-M0+ MCU | Silicon Labs

MPN: EFM32ZG222F32-B-QFP48 ✓ Aktif
2.5 V or 3.3 V Vdss 114 uA/MHz Id 48-pin TQFP, 7 mm x 7 mm Package 24 MHz Speed 32 KB Memory
MOQ: 1 |

EFM32ZG222F32-B-QFP48 Genel Bakış

Silicon Labs EFM32ZG222F32-B-QFP48 is a 32-bit ARM Cortex-M0+ microcontroller with a 24 MHz maximum clock, 32 KB of Flash memory, and 4 KB of SRAM in a 48-pin TQFP package measuring 7 mm by 7 mm. The device provides 37 digital I/O pins and two 16-bit timers, making it suitable for compact, energy-sensitive embedded systems.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Cortex-M0+ core belongs to the ARM processor family and provides a compact instruction set for control-oriented tasks. Within the Silicon Labs EFM32 portfolio, the Zero Gecko family emphasizes low-power operation, rapid wake-up behavior, autonomous peripherals, and analog integration for battery-powered and industrial equipment.

Key device attributes include a 24 MHz operating speed, 32 KB Flash for firmware, and 4 KB SRAM for working data. The Zero Gecko power platform supports low-energy operating modes, with Stop-mode current reported as low as 0.5 uA and Run-mode current as high as 114 uA/MHz. These characteristics help balance processing performance with battery life in sensor nodes, portable instruments, and connected industrial controls.

The EFM32ZG222F32 combines an ARM Cortex-M0+ core with two 16-bit timers, 37 digital I/O pins, and integrated low-power peripherals. Manufacturer information identifies I2C connectivity among the supported interfaces. Its energy-saving architecture, fast wake-up capability, and mixed-signal integration reduce the need for external components in compact embedded designs.

Typical uses include industrial sensor nodes, low-power wireless accessories, environmental monitoring equipment, portable measurement products, and small control boards. A 32 KB memory footprint is appropriate for focused firmware that does not require a high-capacity display interface, extensive connectivity stack, or large application storage. The 48-pin TQFP package also supports easier inspection and assembly than very-small leadless packages.

When assigning PCB connections, connect the EFM32 power rails according to the pin-description table in the manufacturer datasheet. The EFM32ZG hardware guidance recommends connecting AVDD_x, VDD_DREG, and IOVDD_x together at the PCB level, with filtering used only where supported by the design requirements. Confirm startup, decoupling, and exposed test-point requirements before layout release.

This page consolidates the Zero Gecko memory, performance, package, low-power, and interface characteristics into an engineering-focused selection reference, alongside practical substitution guidance, application fit, and PCB design considerations.

Drop-in alternatifler için EFM32ZG222F32-B-QFP48 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller EFM32ZG222F32-B-QFP48 (aynı form faktörü ve ayağa oturma) — farklı olan Package, Flash Memory, Digital I/O Pins, Architecture, RAM.

Silicon Labs
Package: 48-TQFP (7 x 7 mm)
Digital I/O Pins: 37
Architecture: 32-bit
İle Karşılaştır EFM32ZG222F32-B-QFP48 →
Silicon Labs
Package: 48-TQFP, 7 mm x 7 mm
Flash Memory: 4 KB
RAM: 2 KB
İle Karşılaştır EFM32ZG222F32-B-QFP48 →
Silicon Labs
Package: 48-pin TQFP (7 x 7 mm)
Flash Memory: 8 KB (8K x 8)
RAM: 2 KB
İle Karşılaştır EFM32ZG222F32-B-QFP48 →

EFM32ZG222F32-QFP48

✅ Yerleştirme
Silicon Labs
📦 48-pin TQFP (7 mm x 7 mm)
32-bit ARM Cortex-M0+ microcontroller · EFM32 Zero Gecko · 24 MHz · 32 kB · 4 kB · 37 · 2 x 16-bit timers · 1.98 V to 3.8 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

EFM32ZG222F16-QFP48T

✅ Yerleştirme
📦 48-pin TQFP (7 mm x 7 mm)
Same 24 MHz Cortex-M0+ core, 4 KB RAM, 37 I/O pins, two 16-bit timers, and 48-pin TQFP layout; Flash is 16 KB rather than 32 KB, a 50% reduction

📋 Katalogda Olmayan Referans Alternatifi

EFM32ZG222F8-QFP48

✅ Yerleştirme
Silicon Labs
📦 48-pin TQFP (7 mm x 7 mm)
32-bit ARM Cortex-M0+ microcontroller · EFM32 Zero Gecko · 24 MHz · ARM Cortex-M0+ · 8 KB (8K x 8) · 2 KB · 37 pins · 2 x 16-bit timers

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

EFM32ZG222F32-B-QFP48 Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 32-bit ARM Cortex-M0+ microcontroller
Processor Core ARM Cortex-M0+
Maximum CPU Frequency 24 MHz
Flash Memory 32 KB
Flash Organization 32K x 8 bits
RAM Memory 4 KB
Digital I/O Pins 37 pins
Timer Count 2 timers
Timer Resolution 16-bit
Run-Mode Current 114 uA/MHz
Stop-Mode Current 0.5 uA
Besleme Gerilimi 2.5 V or 3.3 V
Serial Interface I2C
Paket 48-pin TQFP, 7 mm x 7 mm
Montaj Türü Surface mount
Architecture 32-bit RISC

EFM32ZG222F32-B-QFP48 48-pin tqfp, 7 mm x 7 mm Pin Yapısı Kılavuzu

EFM32ZG222F32-B-QFP48 (48-pin tqfp, 7 mm x 7 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

48-pin tqfp, 7 mm x 7 mm paket pin çizelgesi için EFM32ZG222F32-B-QFP48

Ayrıntılı pin çıkış verisi mevcut değil: EFM32ZG222F32-B-QFP48.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

EFM32ZG222F32-B-QFP48 için uygundur 6 uygulamas: Battery-Powered Environmental Sensor Node, Industrial Control and Sensor Interface, Portable Medical Accessory, Low-Power Connected Accessory, Portable Measurement Instrument, Compact Automation Controller.

🧩

Battery-Powered Environmental Sensor Node

The EFM32ZG222F32-B-QFP48 fits environmental monitoring nodes because its Zero Gecko architecture supports Stop-mode current as low as 0.5 uA and Run-mode current up to 114 uA/MHz. The 24 MHz Cortex-M0+ core can process sensor readings while the device spends most of its operating cycle in a low-energy state. Its 32 KB Flash provides space for acquisition, filtering, logging, and communications code, while 37 digital I/O pins provide flexible sensor and alarm connections. The 48-pin TQFP is also easier to inspect and assemble than a leadless package.

🏭

Industrial Control and Sensor Interface

The EFM32ZG222F32-B-QFP48 is suitable for compact industrial controllers that combine sensing, digital control, and low-power operation. Its two 16-bit timers can support periodic measurement, debouncing, motor timing, or pulse-capture tasks, while the 37 digital I/O pins provide interface capacity for switches, relays, and status indicators. The supported I2C interface permits connection to compatible sensors and converters. For factory equipment, the 48-pin TQFP package provides straightforward assembly and inspection, and the 32 KB Flash can support focused control firmware without requiring a larger memory device.

💊

Portable Medical Accessory

The EFM32ZG222F32-B-QFP48 can serve as the controller in a low-power medical accessory where local signal processing and limited connectivity are required. Its Cortex-M0+ processor operates up to 24 MHz, while 32 KB Flash and 4 KB SRAM are appropriate for compact acquisition and control routines. Low-energy operation helps reduce the burden on a rechargeable or primary-cell power source, and the two timers support precise periodic sampling. Medical-system integrators must still apply the appropriate risk controls, isolation requirements, and validation process to the finished product.

📱

Low-Power Connected Accessory

The EFM32ZG222F32-B-QFP48 works well as the host controller for a compact Bluetooth or radio accessory that emphasizes standby energy use. The MCU can coordinate sensor input, button handling, and low-rate data exchange while the Zero Gecko platform handles rapid transitions from low-energy states. Its 37 digital I/O pins allow a radio module, status LEDs, and external controls to share the device. The 48-pin TQFP footprint also provides enough I/O for expansion while keeping the package compatible with conventional surface-mount assembly.

🖥️

Portable Measurement Instrument

The EFM32ZG222F32-B-QFP48 is appropriate for a handheld measurement instrument requiring responsive control, local timers, and modest data storage. The 24 MHz Cortex-M0+ core handles sampling orchestration and user-interface state, while the two 16-bit timers can implement accurate intervals for measurement and capture functions. Thirty-seven digital I/O pins provide control for switches, displays, indicators, and external converters. With 32 KB Flash and 4 KB RAM, the device is best suited to focused instrumentation rather than large data buffering; use external storage when long acquisition records are required.

🔧

Compact Automation Controller

The EFM32ZG222F32-B-QFP48 can serve as a compact automation controller for pumps, valves, indicators, and local sensor networks. Two 16-bit timers support repeatable timing operations, and 37 digital I/O pins leave sufficient interface capacity for discrete sensors and actuators. The 24 MHz Cortex-M0+ core provides adequate throughput for deterministic control logic, while the 32 KB Flash capacity accommodates a focused application program. Its low-energy modes are useful in installations where the controller spends substantial time between control updates. Production designs should verify actuator drive levels and add appropriate protection outside the MCU.

What are the key specifications of EFM32ZG222F32-B-QFP48 that engineers should know?
The EFM32ZG222F32-B-QFP48 is a 24 MHz ARM Cortex-M0+ microcontroller with 32 KB Flash, 4 KB SRAM, 37 digital I/O pins, and two 16-bit timers. According to the Silicon Labs product page, it also supports I2C and belongs to the low-power Zero Gecko family. The device is packaged in a 48-pin TQFP measuring 7 mm by 7 mm and is intended for energy-sensitive embedded applications.
What is the operating voltage of EFM32ZG222F32-B-QFP48?
The EFM32ZG222F32-B-QFP48 is intended for 2.5 V or 3.3 V operation. Manufacturer and distributor product information identify these supply options for the device. The complete operating limits, including the permitted voltage range for each I/O bank and the sequencing requirements among AVDD_x, VDD_DREG, and IOVDD_x, should be confirmed in the Silicon Labs EFM32ZG222 datasheet before power-rail design.
Where can I download the EFM32ZG222F32-B-QFP48 datasheet PDF?
The EFM32ZG222F32-B-QFP48 datasheet PDF can be obtained from the EFM32ZG222 documentation link on this page or through the Silicon Labs product page for the EFM32ZG222F32-QFP48 family member. The manufacturer documentation describes the Cortex-M0+ processor, 32 KB Flash, 4 KB RAM, low-power modes, electrical limits, and the 48-pin package. Use AN0002, EFM32 Hardware Design Considerations, for PCB-level power-rail guidance.
Where can I find the EFM32ZG222F32-B-QFP48 pinout?
The authoritative EFM32ZG222F32-B-QFP48 pinout appears in the Silicon Labs EFM32ZG222 datasheet under the package and pin-description tables. The device uses a 48-pin TQFP with 37 digital I/O pins; the remaining assignments include power and control functions. Use the pin-description table when assigning PCB tracks, programming the GPIO controller, and checking the relationship between AVDD_x, VDD_DREG, and IOVDD_x.
How much Flash and RAM does EFM32ZG222F32-B-QFP48 have?
The EFM32ZG222F32-B-QFP48 contains 32 KB of Flash memory organized as 32K by 8 bits and 4 KB of SRAM. According to the Silicon Labs product information, the same memory configuration is used across the identified EFM32ZG222F32 family member. This capacity is suitable for compact control firmware, while designs requiring substantially larger buffers, protocol stacks, or application storage should consider a higher-memory microcontroller.
What can replace EFM32ZG222F32-B-QFP48?
EFM32ZG222F32-QFP48 is the closest listed substitute because it retains the 24 MHz Cortex-M0+ configuration, 32 KB Flash, 4 KB RAM, 37 digital I/O pins, two 16-bit timers, and 48-pin TQFP format. EFM32ZG222F16-QFP48T offers the same package and 24 MHz core but only 16 KB Flash, while EFM32ZG222F8-QFP48 provides 8 KB Flash. Firmware capacity and board-level suffix differences must be reviewed before substitution.
Is EFM32ZG222F32-B-QFP48 the same as EFM32ZG222F32-QFP48?
The EFM32ZG222F32-B-QFP48 and EFM32ZG222F32-QFP48 share the core, memory, I/O count, timer configuration, and 48-pin TQFP format. Their distinguishing suffix is part of the ordering code, so the orderable temperature, packaging, and lifecycle details should be checked against the manufacturer ordering information. Confirm the exact suffix before replacing the component in production documentation.
EFM32ZG222F32-B-QFP48 vs EFM32TG222F32-QFP48 — which is better for low-power control?
The EFM32ZG222F32-B-QFP48 is generally the better match when the design specifically requires the Cortex-M0+ Zero Gecko platform at 24 MHz. The EFM32TG222F32-QFP48 uses a Cortex-M3 Tiny Gecko core rated up to 32 MHz and also lists 32 KB Flash, 4 KB RAM, 37 digital I/O pins, and two 16-bit timers. Because the core and peripheral implementation differ, software and peripheral mapping must be reviewed rather than assuming a transparent firmware substitution.
When should I choose EFM32ZG222F32-B-QFP48 over EFM32TG222F32-QFP48?
Choose the EFM32ZG222F32-B-QFP48 when firmware is built for Cortex-M0+ and the design values the Zero Gecko platform's low-power operation and fast wake-up behavior. The EFM32TG222F32-QFP48 provides a Cortex-M3 core operating up to 32 MHz and may suit code requiring the higher-performance instruction set. Both have 32 KB Flash and 4 KB RAM, so processor requirements and validated peripheral support should drive the decision.
Is EFM32ZG222F32-B-QFP48 suitable for battery-powered sensor nodes?
The EFM32ZG222F32-B-QFP48 is suitable for battery-powered sensor nodes because its Zero Gecko platform supports low-energy modes, fast wake-up behavior, and Stop-mode current as low as 0.5 uA. Run-mode current is reported as high as 114 uA/MHz. Actual battery life depends on the duty cycle, sensor load, regulator efficiency, and time spent outside the low-power state.
What is the best Silicon Labs equivalent for EFM32ZG222F32-B-QFP48?
The closest Silicon Labs equivalent listed for EFM32ZG222F32-B-QFP48 is EFM32ZG222F32-QFP48 because both identify a 24 MHz Cortex-M0+ device with 32 KB Flash, 4 KB RAM, 37 digital I/O pins, and a 48-pin TQFP. If 16 KB or 8 KB Flash is sufficient, EFM32ZG222F16-QFP48T or EFM32ZG222F8-QFP48 may fit the same board family, but the reduced firmware capacity must be accepted.
Where can I buy EFM32ZG222F32-B-QFP48 online?
Use the Request a Quote form on this page to request EFM32ZG222F32-B-QFP48 pricing, stock, and order handling. The form allows buyers to specify the required quantity and confirm the exact 48-pin TQFP ordering suffix. Current availability and lead time should be confirmed through the quote response rather than inferred from a catalog page.
What is the price of EFM32ZG222F32-B-QFP48?
Current pricing for EFM32ZG222F32-B-QFP48 is shown through the Request a Quote form on this page. Submit the required quantity and intended package or tray handling, and the quote workflow will provide the applicable commercial terms. The price is also managed separately from the technical content so that it can reflect current inventory, order volume, and lifecycle status.
What is the lead time for EFM32ZG222F32-B-QFP48?
The current lead time for EFM32ZG222F32-B-QFP48 should be requested through the Request a Quote form on this page. Include the required quantity, production schedule, and packaging preference in the request. Because availability can vary by order quantity and market conditions, use the returned quotation and confirmed allocation rather than a generic stock estimate.
Is EFM32ZG222F32-B-QFP48 in stock?
Current EFM32ZG222F32-B-QFP48 stock status is handled through the Request a Quote form on this page. Submit the desired quantity and receive a current availability and lead-time response from the sales workflow. The 48-pin TQFP device includes a -B ordering suffix, so confirm that the quoted part number matches the target exactly before releasing a purchase order.
Does EFM32ZG222F32-B-QFP48 meet RoHS and automotive qualification requirements?
The EFM32ZG222F32-B-QFP48 is an industrial-style embedded microcontroller, and the product should not be treated as AEC-Q100 qualified unless a specific automotive ordering option states that qualification. RoHS and REACH status require confirmation from the current Silicon Labs material declaration or product documentation. Compliance depends on the exact orderable MPN, so use the full -B-QFP48 suffix when requesting environmental and quality documentation.

Mühendislik referans verileri: EFM32ZG222F32-B-QFP48 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose EFM32ZG222F32-B-QFP48 when the design requires the complete 32 KB Flash allocation of the EFM32ZG222F32 configuration, a 24 MHz Cortex-M0+ core, 4 KB SRAM, and 37 digital I/O pins in a 48-pin TQFP package. EFM32ZG222F32-QFP48 is the closest substitution because its listed electrical and memory resources match; confirm the ordering suffix before release. Use EFM32ZG222F16-QFP48T only when 16 KB Flash is sufficient and the firmware can be rebuilt for the smaller memory region. Use EFM32ZG222F8-QFP48 for highly compact firmware that fits within 8 KB Flash. None of these choices should be made without checking bootloaders, linker regions, programming configuration, pin multiplexing, and the complete ordering information.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün EFM32ZG222F32-QFP48 EFM32ZG222F16-QFP48T EFM32ZG222F8-QFP48
Package 48-pin TQFP (7 mm x 7 mm) 48-pin TQFP (7 mm x 7 mm) 48-pin TQFP (7 mm x 7 mm) 48-pin TQFP (7 mm x 7 mm)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Processor Core ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+
Maximum CPU Frequency 24 MHz 24 MHz 24 MHz 24 MHz
Flash Memory 32 KB 32 KB 16 KB 8 KB
RAM Memory 4 KB 4 KB 4 KB 4 KB
Digital I/O Pins 37 pins 37 pins 37 pins 37 pins
Timer Configuration 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers

Ana Farklılayıcılar

  • Twice the Flash capacity of the 16 KB EFM32ZG222F16-QFP48T alternative (karşılaştırma:EFM32ZG222F16-QFP48T)
  • Four times the Flash capacity of the 8 KB EFM32ZG222F8-QFP48 alternative (karşılaştırma:EFM32ZG222F8-QFP48)
  • Identical core, memory, and I/O resources to EFM32ZG222F32-QFP48 (karşılaştırma:EFM32ZG222F32-QFP48)

Tasarım Notları

Follow AN0002, EFM32 Hardware Design Considerations, when connecting AVDD_x, VDD_DREG, and IOVDD_x. The application note recommends joining these rails at the PCB level, with optional filtering. Place the required supply capacitors close to their associated pins, keep return-current paths short, and verify the minimum on/off timing for every rail. The device can operate from 2.5 V or 3.3 V, but external sensor and interface levels must remain compatible with the selected I/O rail.

Assign pins using the manufacturer pin-description table rather than relying only on the 37-count digital I/O specification. Reserve access to power, ground, reset, programming, and clock pins in the board outline, and maintain adequate clearance around exposed leads. Because the EFM32ZG platform supports rapid wake-up operation, use short return paths and tightly placed decoupling to prevent switching current from disturbing nearby analog or communication circuitry.

Estimated: with a 3.3 V supply and a 2.5 V regulated output at 114 uA/MHz, the controller consumes about 0.855 mA while running at 24 MHz before peripheral and I/O loading. This estimate uses 3.3 V, 2.5 V, 24 MHz, and 114 uA/MHz as inputs. Actual consumption changes with active peripherals, flash execution, sleep duration, GPIO loading, and regulator efficiency, so measure the complete operating profile for battery-life calculations.

Do not select EFM32ZG222F16-QFP48T or EFM32ZG222F8-QFP48 solely because their packages match. Their Flash capacities are 16 KB and 8 KB, respectively, compared with 32 KB for the target, and the reduction can prevent existing firmware from fitting. Rebuild the application for the smaller memory map, check linker settings and bootloader assumptions, and validate the complete production image before approving either substitution.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The exact environmental declarations and automotive qualification status must be confirmed for the complete EFM32ZG222F32-B-QFP48 ordering code. The standard product is not identified as an automotive-qualified variant.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

efm32zg222f32 b qfp48 efm32zg222f32 qfp48 EFM32ZG222F32-B-QFP48 datasheet EFM32ZG222F32-B-QFP48 pinout EFM32ZG222F32-B-QFP48 datasheet pdf EFM32ZG222F32-B-QFP48 equivalent EFM32ZG222F32-B-QFP48 replacement EFM32ZG222F32-B-QFP48 price EFM32ZG222F32-B-QFP48 stock Silicon Labs EFM32ZG222F32-B-QFP48 EFM32ZG222F32-B-QFP48 vs EFM32TG222F32-QFP48 EFM32ZG222F32-B-QFP48 application circuit

İlgili Bileşenler ve Terimler

Silicon Labs EFM32ZG222F32-B-QFP48 EFM32ZG222F32-QFP48 EFM32ZG222F16-QFP48T EFM32ZG222F8-QFP48 EFM32TG222F32-QFP48 EFM32 Zero Gecko ARM Cortex-M0+ 32-bit RISC microcontroller embedded microcontroller semiconductor 32 KB Flash memory 4 KB SRAM 24 MHz 0.5 uA Stop mode 114 uA/MHz Run mode I2C 48-pin TQFP 7 mm x 7 mm package surface mount energy-sensitive applications battery-powered sensor nodes industrial control Efm32ZG222 datasheet
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle