EFM32ZG222F32-B-QFP48 - 24MHz Cortex-M0+ MCU | Silicon Labs
MPN: EFM32ZG222F32-B-QFP48 ✓ فعالEFM32ZG222F32-B-QFP48 نمای کلی
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Cortex-M0+ core belongs to the ARM processor family and provides a compact instruction set for control-oriented tasks. Within the Silicon Labs EFM32 portfolio, the Zero Gecko family emphasizes low-power operation, rapid wake-up behavior, autonomous peripherals, and analog integration for battery-powered and industrial equipment.
Key device attributes include a 24 MHz operating speed, 32 KB Flash for firmware, and 4 KB SRAM for working data. The Zero Gecko power platform supports low-energy operating modes, with Stop-mode current reported as low as 0.5 uA and Run-mode current as high as 114 uA/MHz. These characteristics help balance processing performance with battery life in sensor nodes, portable instruments, and connected industrial controls.
The EFM32ZG222F32 combines an ARM Cortex-M0+ core with two 16-bit timers, 37 digital I/O pins, and integrated low-power peripherals. Manufacturer information identifies I2C connectivity among the supported interfaces. Its energy-saving architecture, fast wake-up capability, and mixed-signal integration reduce the need for external components in compact embedded designs.
Typical uses include industrial sensor nodes, low-power wireless accessories, environmental monitoring equipment, portable measurement products, and small control boards. A 32 KB memory footprint is appropriate for focused firmware that does not require a high-capacity display interface, extensive connectivity stack, or large application storage. The 48-pin TQFP package also supports easier inspection and assembly than very-small leadless packages.
When assigning PCB connections, connect the EFM32 power rails according to the pin-description table in the manufacturer datasheet. The EFM32ZG hardware guidance recommends connecting AVDD_x, VDD_DREG, and IOVDD_x together at the PCB level, with filtering used only where supported by the design requirements. Confirm startup, decoupling, and exposed test-point requirements before layout release.
This page consolidates the Zero Gecko memory, performance, package, low-power, and interface characteristics into an engineering-focused selection reference, alongside practical substitution guidance, application fit, and PCB design considerations.
جایگزینهای drop-in برای EFM32ZG222F32-B-QFP48 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای EFM32ZG222F32-B-QFP48 (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Flash Memory, Digital I/O Pins, Architecture, RAM.
EFM32ZG222F32-QFP48
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EFM32ZG222F16-QFP48T
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
EFM32ZG222F8-QFP48
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EFM32ZG222F32-B-QFP48 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Processor Core | ARM Cortex-M0+ |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 32 KB |
| Flash Organization | 32K x 8 bits |
| RAM Memory | 4 KB |
| Digital I/O Pins | 37 pins |
| Timer Count | 2 timers |
| Timer Resolution | 16-bit |
| Run-Mode Current | 114 uA/MHz |
| Stop-Mode Current | 0.5 uA |
| ولتاژ تغذیه | 2.5 V or 3.3 V |
| Serial Interface | I2C |
| بستهبندی | 48-pin TQFP, 7 mm x 7 mm |
| نوع نصب | Surface mount |
| Architecture | 32-bit RISC |
راهنمای پیکربندی پین EFM32ZG222F32-B-QFP48 48-pin tqfp, 7 mm x 7 mm
پیکربندی پین برای EFM32ZG222F32-B-QFP48 (پکیج 48-pin tqfp, 7 mm x 7 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای EFM32ZG222F32-B-QFP48.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
EFM32ZG222F32-B-QFP48 مناسب است برای 6 کاربردs: Battery-Powered Environmental Sensor Node, Industrial Control and Sensor Interface, Portable Medical Accessory, Low-Power Connected Accessory, Portable Measurement Instrument, Compact Automation Controller.
Battery-Powered Environmental Sensor Node
The EFM32ZG222F32-B-QFP48 fits environmental monitoring nodes because its Zero Gecko architecture supports Stop-mode current as low as 0.5 uA and Run-mode current up to 114 uA/MHz. The 24 MHz Cortex-M0+ core can process sensor readings while the device spends most of its operating cycle in a low-energy state. Its 32 KB Flash provides space for acquisition, filtering, logging, and communications code, while 37 digital I/O pins provide flexible sensor and alarm connections. The 48-pin TQFP is also easier to inspect and assemble than a leadless package.
پیشنهادی
Industrial Control and Sensor Interface
The EFM32ZG222F32-B-QFP48 is suitable for compact industrial controllers that combine sensing, digital control, and low-power operation. Its two 16-bit timers can support periodic measurement, debouncing, motor timing, or pulse-capture tasks, while the 37 digital I/O pins provide interface capacity for switches, relays, and status indicators. The supported I2C interface permits connection to compatible sensors and converters. For factory equipment, the 48-pin TQFP package provides straightforward assembly and inspection, and the 32 KB Flash can support focused control firmware without requiring a larger memory device.
پیشنهادی
Portable Medical Accessory
The EFM32ZG222F32-B-QFP48 can serve as the controller in a low-power medical accessory where local signal processing and limited connectivity are required. Its Cortex-M0+ processor operates up to 24 MHz, while 32 KB Flash and 4 KB SRAM are appropriate for compact acquisition and control routines. Low-energy operation helps reduce the burden on a rechargeable or primary-cell power source, and the two timers support precise periodic sampling. Medical-system integrators must still apply the appropriate risk controls, isolation requirements, and validation process to the finished product.
پیشنهادی
Low-Power Connected Accessory
The EFM32ZG222F32-B-QFP48 works well as the host controller for a compact Bluetooth or radio accessory that emphasizes standby energy use. The MCU can coordinate sensor input, button handling, and low-rate data exchange while the Zero Gecko platform handles rapid transitions from low-energy states. Its 37 digital I/O pins allow a radio module, status LEDs, and external controls to share the device. The 48-pin TQFP footprint also provides enough I/O for expansion while keeping the package compatible with conventional surface-mount assembly.
پیشنهادی
Portable Measurement Instrument
The EFM32ZG222F32-B-QFP48 is appropriate for a handheld measurement instrument requiring responsive control, local timers, and modest data storage. The 24 MHz Cortex-M0+ core handles sampling orchestration and user-interface state, while the two 16-bit timers can implement accurate intervals for measurement and capture functions. Thirty-seven digital I/O pins provide control for switches, displays, indicators, and external converters. With 32 KB Flash and 4 KB RAM, the device is best suited to focused instrumentation rather than large data buffering; use external storage when long acquisition records are required.
پیشنهادی
Compact Automation Controller
The EFM32ZG222F32-B-QFP48 can serve as a compact automation controller for pumps, valves, indicators, and local sensor networks. Two 16-bit timers support repeatable timing operations, and 37 digital I/O pins leave sufficient interface capacity for discrete sensors and actuators. The 24 MHz Cortex-M0+ core provides adequate throughput for deterministic control logic, while the 32 KB Flash capacity accommodates a focused application program. Its low-energy modes are useful in installations where the controller spends substantial time between control updates. Production designs should verify actuator drive levels and add appropriate protection outside the MCU.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای EFM32ZG222F32-B-QFP48 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | EFM32ZG222F32-QFP48 | EFM32ZG222F16-QFP48T | EFM32ZG222F8-QFP48 |
|---|---|---|---|---|
| Package | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 24 MHz | 24 MHz | 24 MHz | 24 MHz |
| Flash Memory | 32 KB | 32 KB | 16 KB | 8 KB |
| RAM Memory | 4 KB | 4 KB | 4 KB | 4 KB |
| Digital I/O Pins | 37 pins | 37 pins | 37 pins | 37 pins |
| Timer Configuration | 2 x 16-bit timers | 2 x 16-bit timers | 2 x 16-bit timers | 2 x 16-bit timers |
تفاوتهای کلیدی
- Twice the Flash capacity of the 16 KB EFM32ZG222F16-QFP48T alternative (در مقابلEFM32ZG222F16-QFP48T)
- Four times the Flash capacity of the 8 KB EFM32ZG222F8-QFP48 alternative (در مقابلEFM32ZG222F8-QFP48)
- Identical core, memory, and I/O resources to EFM32ZG222F32-QFP48 (در مقابلEFM32ZG222F32-QFP48)
یادداشتهای طراحی
Follow AN0002, EFM32 Hardware Design Considerations, when connecting AVDD_x, VDD_DREG, and IOVDD_x. The application note recommends joining these rails at the PCB level, with optional filtering. Place the required supply capacitors close to their associated pins, keep return-current paths short, and verify the minimum on/off timing for every rail. The device can operate from 2.5 V or 3.3 V, but external sensor and interface levels must remain compatible with the selected I/O rail.
Assign pins using the manufacturer pin-description table rather than relying only on the 37-count digital I/O specification. Reserve access to power, ground, reset, programming, and clock pins in the board outline, and maintain adequate clearance around exposed leads. Because the EFM32ZG platform supports rapid wake-up operation, use short return paths and tightly placed decoupling to prevent switching current from disturbing nearby analog or communication circuitry.
Estimated: with a 3.3 V supply and a 2.5 V regulated output at 114 uA/MHz, the controller consumes about 0.855 mA while running at 24 MHz before peripheral and I/O loading. This estimate uses 3.3 V, 2.5 V, 24 MHz, and 114 uA/MHz as inputs. Actual consumption changes with active peripherals, flash execution, sleep duration, GPIO loading, and regulator efficiency, so measure the complete operating profile for battery-life calculations.
Do not select EFM32ZG222F16-QFP48T or EFM32ZG222F8-QFP48 solely because their packages match. Their Flash capacities are 16 KB and 8 KB, respectively, compared with 32 KB for the target, and the reduction can prevent existing firmware from fitting. Rebuild the application for the smaller memory map, check linker settings and bootloader assumptions, and validate the complete production image before approving either substitution.
اطلاعات انطباق
The exact environmental declarations and automotive qualification status must be confirmed for the complete EFM32ZG222F32-B-QFP48 ordering code. The standard product is not identified as an automotive-qualified variant.