Maxim Integrated

ICL7653CPA - Zero-Drift 2 MHz Op Amp | Maxim Integrated

MPN: ICL7653CPA ✓ Aktif
±8 V Vdss 4 pA Id 8-pin PDIP Package
MOQ: 1 |

ICL7653CPA Genel Bakış

Maxim Integrated ICL7653CPA is a single-circuit chopper-stabilized, zero-drift operational amplifier with a 2 MHz gain-bandwidth product, 2.5 V/us slew rate, and input bias current of 4 pA. It is designed for single or dual-supply operation from ±8 V and is packaged in an 8-pin PDIP. The combination of low offset voltage, low input bias current, and relatively wide bandwidth makes the ICL7653CPA useful for precision low-level signal conditioning, instrumentation, sensor interfaces, and current measurement.

A chopper-stabilized operational amplifier is an amplifier whose low-frequency offset and drift are reduced by continuously detecting and correcting low-frequency error components. In the signal-chain hierarchy, this device belongs to the operational-amplifier family and provides the closed-loop gain, filtering, and input-buffering functions required between sensors and higher-level measurement or control circuitry. It differs from a general-purpose precision amplifier through its zero-drift architecture and unusually low 4 pA input bias current.

The ICL7653CPA provides a 2 MHz gain-bandwidth product and a 2.5 V/us slew rate. Its amplifier type is identified as chopper, or zero drift, and the device contains one amplifier circuit. The specified operating range includes 0°C to +70°C, making the CPA grade appropriate for commercial-temperature equipment. The 8-pin PDIP format also supports conventional through-hole assembly, prototyping, repair, and designs that favor socketed or manually inspected connections.

Chopper stabilization trades some additional internal complexity for reduced low-frequency error. This is particularly beneficial when the desired signal changes slowly and a conventional amplifier’s input offset would otherwise create unacceptable measurement error. The 2 MHz gain-bandwidth product remains sufficient for a broad range of low-level signal paths, while the 2.5 V/us slew rate allows the amplifier to respond to higher-frequency components without changing the basic zero-drift operating approach.

Typical applications include precision current-to-voltage conversion in power-monitoring circuits, low-level sensor amplification, bridge-transducer signal conditioning, laboratory instrumentation, and analog measurement systems. In these applications, the 4 pA input bias current minimizes disturbance of high-impedance sources, while the zero-drift characteristic supports accurate operation where signal levels remain small relative to system offsets. The device can also serve as a stable gain stage in higher-level analog chains.

When designing around the ICL7653CPA, verify the complete pin assignment and supply limits against the manufacturer datasheet before laying out the PCB. Pay particular attention to bypassing, input common-mode range, output swing, noise bandwidth, and the behavior of the chopper system near the lower end of the useful frequency range. A stable reference-quality implementation requires appropriate layout and decoupling rather than relying on nominal specifications alone.

This product page combines the ICL7653CPA electrical characteristics, package details, sourcing information, and application guidance in one engineering-focused reference. It also identifies compatible same-family alternatives, highlights their qualification differences, and organizes design considerations for instrumentation, current sensing, and low-level analog signal-processing systems.

Drop-in alternatifler için ICL7653CPA — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

ICL7653EPA

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-pin PDIP
Temperature qualification differs: ICL7653CPA is specified from 0°C to +70°C, while ICL7653EPA is an extended-temperature grade; the package and chopper-stabilized amplifier function remain compatible.

📋 Katalogda Olmayan Referans Alternatifi

ICL7650CPA

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-pin PDIP
Uses the same 8-pin PDIP footprint but supports different internal-feedback operating modes; closed-loop configuration must be ICL7650-compatible.

📋 Katalogda Olmayan Referans Alternatifi

ICL7650EPA

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-pin PDIP
Same 8-pin PDIP family format and extended-temperature grading, but different internal-feedback operating modes and a wider temperature range than ICL7653CPA.

📋 Katalogda Olmayan Referans Alternatifi

ICL7651CPA

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-pin PDIP
Same 8-pin PDIP family format and commercial temperature grade, but different internal-feedback characteristics and gain stability than ICL7653CPA.

📋 Katalogda Olmayan Referans Alternatifi

ICL7651EPA

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-pin PDIP
Same 8-pin PDIP family format with extended-temperature qualification, but different internal-feedback characteristics and gain stability than ICL7653CPA.

📋 Katalogda Olmayan Referans Alternatifi

ICL7653CPA Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Chopper (Zero-Drift)
Number of Circuits 1 circuit
Gain-Bandwidth Product 2 MHz
Slew Rate 2.5 V/us
Input Bias Current 4 pA
Besleme Gerilimi ±8 V
Besleme Akımı 1.2 mA
İşletim Sıcaklığı Aralığı 0°C to +70°C
Paket 8-pin PDIP
Montaj Türü Through-hole
Package Width 0.300 in (7.62 mm)
Çıkış Türü Current output
Product Status Active
Series ICL7653C

ICL7653CPA 0.300 in (7.62 mm) Pin Yapısı Kılavuzu

ICL7653CPA (0.300 in (7.62 mm) paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

0.300 in (7.62 mm) paket pin çizelgesi için ICL7653CPA

Ayrıntılı pin çıkış verisi mevcut değil: ICL7653CPA.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ICL7653CPA için uygundur 6 uygulamas: Precision Current Measurement, High-Impedance Sensor Interface, Bridge Transducer Conditioning, Laboratory Instrumentation, Low-Level Analog Signal Conditioning, Battery-Powered Measurement.

⚡

Precision Current Measurement

The ICL7653CPA is well suited to current-to-voltage conversion because its chopper-stabilized architecture reduces low-frequency offset error while its 4 pA input bias current limits disturbance of high-impedance current signals. A typical circuit uses the amplifier in an inverting configuration around a precision shunt or current-sense resistor. The 2 MHz gain-bandwidth product supports bandwidth beyond slow DC measurement, while the 2.5 V/us slew rate handles faster transients. Check output swing, common-mode limits, and shunt power dissipation at the intended current.

🧩

High-Impedance Sensor Interface

The 4 pA input bias current of the ICL7653CPA makes it useful for low-level sensors whose output impedance is high enough that amplifier input current could create an unacceptable error voltage. The device can amplify a sensor output close to ground while its chopper stabilization improves DC accuracy. Its 2 MHz gain-bandwidth product is ample for many temperature, pressure, strain, and chemical-sensor channels, although the input bias contribution should be checked against the sensor impedance and the complete frequency range of the measured signal.

🏭

Bridge Transducer Conditioning

The ICL7653CPA can provide low-offset gain for strain-gauge, load-cell, pressure-bridge, and similar differential transducers. Chopper stabilization is valuable because the useful bridge signal can be small and slow, conditions under which input offset and drift dominate the measurement. The 4 pA input bias current reduces excitation-rail loading, and the 2 MHz gain-bandwidth product permits moderate-bandwidth filtering after amplification. The circuit must still respect the bridge excitation voltage, input common-mode range, and the amplifier's output-swing limits.

🔧

Laboratory Instrumentation

For laboratory and test instrumentation, the ICL7653CPA combines low input bias current, low-offset behavior, and a 2 MHz gain-bandwidth product in a through-hole 8-pin PDIP package. It can form the gain stage of a buffered front end, a precision reference buffer, or a low-level measurement channel. The package is particularly convenient for prototypes, educational platforms, and repairable laboratory equipment. Designers should include input and output bypassing, use short feedback paths, and verify the chopper-related output noise in the required measurement bandwidth.

📺

Low-Level Analog Signal Conditioning

The ICL7653CPA is useful when a weak analog signal must be amplified before digitization or comparison. Its chopper-stabilized operation reduces low-frequency error, while the 2 MHz gain-bandwidth product and 2.5 V/us slew rate provide more bandwidth than a purely DC-oriented precision amplifier. In a typical signal-conditioning chain, the device amplifies a sensor or detector output and drives a downstream filter or converter. Select the closed-loop gain according to the manufacturer's stability guidance and confirm that output noise and settling behavior meet the acquisition bandwidth.

📱

Battery-Powered Measurement

The ICL7653CPA can be used in portable measurement systems where a low-level sensor signal must be amplified before conversion, subject to the device operating from suitable ±8 V or single-supply rails. Its low 4 pA input bias current helps preserve signals from high-impedance sources, and its 1.2 mA supply current helps limit continuous power demand. The 8-pin PDIP package supports through-hole assembly where it is appropriate. A battery design must provide proper rail generation and decoupling while preserving the required input and output common-mode ranges.

What is the ICL7653CPA?
The ICL7653CPA is a single-circuit, chopper-stabilized zero-drift operational amplifier from Maxim Integrated. It combines a 2 MHz gain-bandwidth product, 2.5 V/us slew rate, and 4 pA input bias current in an 8-pin PDIP package. Maxim describes the ICL7650 and ICL7653 as chopper-stabilized amplifiers intended for low-level signal processing, where low offset and very low bias current improve measurement accuracy.
Where can I download the ICL7653CPA datasheet PDF?
The ICL7653CPA datasheet PDF is available from the manufacturer-linked document at https://www.icdirectory.com/d/integrated-circuits/icl7653cpa.pdf. Use the pin-description table, electrical-characteristics table, and typical-application circuits in that document before finalizing a PCB layout. The same family is also indexed by Maxim Integrated under the ICL7650/ICL7653 chopper-stabilized op-amp datasheet.
Where can I find the ICL7653CPA pinout?
The ICL7653CPA pinout is published in the pin-configuration section of the manufacturer datasheet, and the device uses an 8-pin PDIP package. Before assigning PCB nets, verify the amplifier, supply, output, offset-null, and compensation connections directly against that table. The public part descriptions confirm the 8-pin PDIP format but do not provide a complete pin-number table on this page.
What are the key specifications of ICL7653CPA that engineers should know?
The principal ICL7653CPA specifications are 2 MHz gain-bandwidth product, 2.5 V/us slew rate, 4 pA input bias current, ±8 V supply capability, one amplifier circuit, and a 0°C to +70°C commercial operating range. Its chopper-stabilized architecture is intended to reduce low-frequency offset error in precision analog systems. These characteristics make it suitable for low-level sensor and instrumentation channels.
What is the difference between ICL7653CPA and ICL7650CPA?
The ICL7653CPA and ICL7650CPA belong to the same Maxim Integrated chopper-stabilized amplifier family and use an 8-pin PDIP format, but their internal compensation and unity-gain stability characteristics are not interchangeable in every application. The ICL7653 is the stability-oriented member for gain-of-one or higher closed-loop operation, whereas the ICL7650 supports feedback configurations that the ICL7653 does not. Confirm the required gain topology before substitution.
When should I choose ICL7653CPA instead of ICL7650CPA?
Choose ICL7653CPA when the signal path requires a stable unity-gain or gain-of-two-or-higher configuration and low-offset, low-bias-current performance. The ICL7653CPA offers a 2 MHz gain-bandwidth product, 2.5 V/us slew rate, and 4 pA input bias current. Choose ICL7650CPA only when the circuit uses an internal-feedback configuration supported by that family member.
Is ICL7653CPA suitable for precision sensor measurement?
Yes, the ICL7653CPA is suitable for precision sensor measurement when the source impedance and signal bandwidth are compatible with its 4 pA input bias current and 2 MHz gain-bandwidth product. Its chopper-stabilized operation reduces low-frequency offset error, while its ±8 V supply capability supports common bipolar analog rails. Output-swing and common-mode limits must still be checked for the selected gain and operating point.
Can ICL7653CPA replace ICL7653EPA?
ICL7653EPA can serve as a same-package alternative when its extended temperature qualification is acceptable, but ICL7653CPA should not be selected when the target equipment must operate below 0°C or above +70°C. The ICL7653CPA is specified for 0°C to +70°C. Verify electrical ratings, offset trim, and pin assignments in the datasheet before treating either grade as a drop-in replacement.
What is the best drop-in replacement for ICL7653CPA?
ICL7653EPA is the closest same-family, same-package candidate because it preserves the 8-pin PDIP format and chopper-stabilized amplifier function while extending the temperature qualification. The CPA grade is limited to 0°C to +70°C, so EPA is appropriate only where the wider EPA operating range is acceptable. Cross-brand replacements are not listed because pin-compatible alternatives were not established from the available cross-reference results.
What can replace ICL7653CPA?
The most defensible replacement is ICL7653EPA when the circuit uses the same 8-pin PDIP footprint, requires unity-gain stability, and can operate within the extended-temperature grade. ICL7650CPA is also pin-compatible at the package level but has different internal-feedback characteristics, so it is suitable only for supported gain configurations. Validate the complete pin function and closed-loop stability before replacement.
Is ICL7653CPA the same as ICL7650CPA?
No. ICL7653CPA and ICL7650CPA are related chopper-stabilized amplifiers in the same family, but they are not electrically interchangeable in every circuit. ICL7653 supports unity-gain or higher closed-loop gains, while ICL7650 supports internal-feedback operating modes. Both use an 8-pin PDIP package, but package similarity alone does not establish functional drop-in compatibility.
Where can I buy ICL7653CPA online?
Use the Request a Quote form on this page to request ICL7653CPA availability, current unit pricing, and lead time. The ICL7653CPA is listed as an active 8-pin PDIP amplifier, and a public listing reports inventory, but inventory status can change without notice. The form allows purchasing teams to submit the exact MPN and required quantity for a current quotation.
What is the price of ICL7653CPA?
Current ICL7653CPA pricing is not published as a fixed value on this page because quotations and component costs can change with quantity, condition, and market conditions. Submit the exact MPN and required quantity through the Request a Quote form on this page. The structured pricing record also distinguishes current qualifying listings from older archived pricing so buyers can evaluate freshness.
What is the lead time for ICL7653CPA?
The current lead time for ICL7653CPA should be confirmed through the Request a Quote form on this page. The part is described as active, but the available listing information does not establish a fixed factory lead time, minimum order quantity, or delivery schedule. Include the requested quantity and target delivery date so the order response can reflect current availability.
Is ICL7653CPA in stock?
A public listing reports ICL7653CPA inventory, while another product record identifies the device as active; nevertheless, stock levels are time-sensitive and cannot be guaranteed on a static product page. Use the Request a Quote form on this page for the current stock position and lead time. Specify the required package, quantity, and shipment destination when requesting a quotation.

Mühendislik referans verileri: ICL7653CPA — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose ICL7653CPA for precision low-level signal paths that require a single chopper-stabilized amplifier, very low 4 pA input bias current, and operation from 0°C to +70°C. Its 2 MHz gain-bandwidth product and 2.5 V/us slew rate make it useful when slow DC accuracy must coexist with moderate signal bandwidth. Choose ICL7653EPA when the same amplifier function and PDIP footprint are required outside the commercial temperature range. Consider ICL7650CPA or ICL7650EPA only when the circuit uses an internal-feedback topology supported by those devices; their package similarity does not make them universal substitutes for the ICL7653. Similarly, ICL7651CPA and ICL7651EPA retain the family package but have different internal-feedback and stability characteristics. For any substitution, verify the complete pin functions, offset behavior, gain stability, common-mode range, output swing, and temperature requirements in the relevant datasheet.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün ICL7653EPA ICL7650CPA ICL7650EPA ICL7651CPA ICL7651EPA
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Amplifier Type Chopper (Zero-Drift) Chopper (Zero-Drift) Chopper (Zero-Drift) Chopper (Zero-Drift) Chopper (Zero-Drift) Chopper (Zero-Drift)
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Operating Temperature Range 0°C to +70°C Extended-temperature grade 0°C to +70°C Extended-temperature grade 0°C to +70°C Extended-temperature grade

Ana Farklılayıcılar

  • Commercial-temperature grade with extended-temperature family alternatives (karşılaştırma:ICL7653EPA)
  • Single-circuit zero-drift amplifier with very low input bias current (karşılaştırma:ICL7650CPA)
  • Useful speed for precision analog amplification (karşılaştırma:ICL7651CPA)

Tasarım Notları

Place the input and output bypass capacitors directly beside their associated power pins, and keep feedback resistors and signal traces short. The ICL7653CPA has a 4 pA input bias current, so leakage from long PCB traces, contaminated connectors, or nearby switching nodes can become more important than resistor noise in a high-impedance design.

Do not assume that every ICL765x member can use the same feedback topology. The ICL7653 is intended for unity-gain or higher closed-loop operation, while ICL7650-family devices support different internal-feedback configurations. Reusing a PCB across family members therefore requires checking the complete pin description and stability guidance, not only the PDIP outline.

Evaluate noise at the bandwidth required by the final signal chain rather than using only the amplifier's headline noise figure. Chopper stabilization improves low-frequency offset performance but introduces characteristic narrowband and wideband noise components. A 2 MHz gain-bandwidth product and 2.5 V/us slew rate provide response capability, but filtering and grounding still determine the usable low-level measurement result.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The part is an active commercial-temperature instrumentation amplifier; no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified.

Veri doğrulanma tarihi: 2026-11-20 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

ICL7653CPA datasheet ICL7653CPA pinout ICL7653CPA datasheet pdf ICL7653CPA specifications ICL7653CPA equivalent ICL7653CPA replacement ICL7653CPA vs ICL7650CPA ICL7653CPA 8-DIP Maxim Integrated ICL7653CPA ICL7653CPA price ICL7653CPA stock ICL7653CPA zero drift amplifier ICL7653CPA instrumentation amplifier ICL7653CPA application circuit

İlgili Bileşenler ve Terimler

Maxim Integrated ICL7653CPA ICL7653EPA ICL7650CPA ICL7650EPA ICL7651CPA ICL7651EPA ICL7653C operational amplifier precision amplifier instrumentation amplifier chopper-stabilized amplifier zero-drift amplifier low-dropout architecture gain-bandwidth product slew rate input bias current input offset voltage 8-pin PDIP PDIP package through-hole package precision current measurement bridge transducer laboratory instrumentation low-level signal conditioning
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle