Renesas Electronics

ICS581G-02 - 200MHz Zero-Delay Clock Buffer | Renesas

MPN: ICS581G-02 ✗ Son Kullanım Zamanı
16-pin TSSOP Package 200 MHz Speed
MOQ: 1 |

ICS581G-02 Genel Bakış

The Renesas Electronics ICS581G-02 is a zero-delay, glitch-free clock multiplexer and fanout buffer rated for 200 MHz operation in a 16-pin TSSOP package measuring 4.40 mm in width. The device provides four true outputs, supports PLL-based clock distribution, and is designed for systems that require multiple synchronized clock outputs with minimal insertion delay.

A clock multiplexer is an integrated timing device that routes one of several input clocks to a shared output while maintaining controlled phase relationship between the selected sources. Clock buffers reproduce a timing signal across multiple loads to improve fanout and isolate source and destination circuits. The ICS581G-02 combines these functions in a single clock and timing IC, placing it within the PLL-based clock distribution hierarchy used in communications, computing, industrial control, and test equipment.

Key characteristics include a maximum stated operating frequency of 200 MHz, four non-inverted outputs, zero-delay clock distribution, glitch-free multiplexing, and a 16-pin TSSOP package with 0.65 mm pitch. The four-output arrangement allows a single device to feed several clock domains while reducing the number of separate buffers required on the printed circuit board. Its TSSOP package supports compact surface-mount construction and automated assembly.

Technically, the ICS581G-02 uses a PLL-based architecture to generate the distributed clock outputs. PLL-based distribution can compensate for clock-path phase differences and provide predictable output relationships when the device is switched between operating modes. Because the manufacturer identifies the part as a zero-delay glitch-free clock multiplexer, designers can use it where source selection and output fanout must occur without introducing an intentional cycle delay at the output.

Typical uses include processor and FPGA clock distribution, communications-module clock routing, data-converter clock fanout, industrial control systems, and instrumentation requiring several outputs from one timing source. The device is also appropriate where a design needs to select between clock sources without relying on discrete multiplexer and buffer combinations. Placement near the loads can reduce trace-related skew and improve clock distribution across a board.

Layout is especially important because a clock device can perform correctly in principle but fail in the assembled PCB if input traces, output loads, and return paths are poorly matched. Keep the clock inputs and outputs over a continuous reference plane, minimize stub branches, place decoupling close to the supply pins, and maintain a symmetric output-routing arrangement. Review the pin-description and layout guidance in the manufacturer datasheet before finalizing fanout and return-path geometry.

This product page combines the verified device characteristics, supported ordering variants, application guidance, and comparison criteria to help engineers evaluate the ICS581G-02 for zero-delay clock multiplexing and fanout designs. It also highlights which electrical and pin-level details must be confirmed from the manufacturer datasheet before production release.

Drop-in alternatifler için ICS581G-02 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

ICS581G-02ILF

✅ Yerleştirme
📦 16-TSSOP
Ordering-suffix variant with the same 200 MHz clock-multiplexer function and 16-TSSOP footprint; suffix-specific temperature and qualification details require verification.

📋 Katalogda Olmayan Referans Alternatifi

ICS581G-02LF

✅ Yerleştirme
📦 16-TSSOP
Ordering-suffix variant listed in the same 200 MHz ICS581G family with a 16-TSSOP package; confirm temperature and marking against the ordering table.

📋 Katalogda Olmayan Referans Alternatifi

ICS581G-02I

✅ Yerleştirme
📦 16-TSSOP
Family ordering variant reported as functionally consistent with ICS581G-02 and terminal-compatible; exact grade and shipment suffix must be checked.

📋 Katalogda Olmayan Referans Alternatifi

ICS581G-02IT

✅ Yerleştirme
📦 16-TSSOP
Ordering variant in the ICS581G-02 family with the same 16-TSSOP clock-buffer package; verify temperature grade and production configuration.

📋 Katalogda Olmayan Referans Alternatifi

ICS581G-02T

✅ Yerleştirme
📦 16-TSSOP
Ordering variant listed within the ICS581G-02 family using the same 16-pin TSSOP format; confirm exact electrical grade and shipping code.

📋 Katalogda Olmayan Referans Alternatifi

ICS581G-02 Özellikler

Product Type Fanout buffer, zero-delay buffer, and glitch-free clock multiplexer
Maximum Stated Frequency 200 MHz
Architecture PLL-based
Number of True Outputs 4 outputs
Number of Inverted Outputs 0 outputs
Input-to-Output Delay Zero delay
Clock Multiplexing Glitch-free
Paket 16-pin TSSOP
Package Width 4.40 mm
Lead Pitch 0.65 mm
Montaj Türü Surface mount
RoHS Durumu Compliant
Standard Package Code PDSO16

ICS581G-02 pdso16 Pin Yapısı Kılavuzu

ICS581G-02 (pdso16 paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

pdso16 paket pin çizelgesi için ICS581G-02

Ayrıntılı pin çıkış verisi mevcut değil: ICS581G-02.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ICS581G-02 için uygundur 6 uygulamas: FPGA Clock Distribution, Communications Clock Routing, Industrial Control Systems, Data Converter Clock Fanout, Test and Measurement Equipment, Processor and Memory Clock Networks.

🖥️

FPGA Clock Distribution

The ICS581G-02 fits FPGA clock-distribution schemes requiring one timing source to feed several logic regions without using separate one-output buffers. Its 200 MHz operating rating covers many moderate-speed FPGA clock networks, while the PLL-based zero-delay architecture and four true outputs provide a compact fanout solution. Place the device close to the clock-consuming devices and route outputs with matched geometry to limit relative skew. Confirm the FPGA input specification, target operating frequency, permissible jitter, and output-load limits before finalizing the design.

🌐

Communications Clock Routing

The ICS581G-02 is suitable for communications equipment that must select and distribute a clock among multiple functional blocks. The zero-delay glitch-free multiplexing function supports controlled clock transfer, and four outputs can feed converters, controllers, interface logic, and memory from one package. At clock rates up to 200 MHz, transmission-line geometry, return paths, and load balance become important. The device should be evaluated against the receiver's jitter and setup requirements, with input and output timing verified from the manufacturer documentation.

🏭

Industrial Control Systems

ICS581G-02-based clock networks can support controller, data-converter, and communications timing in industrial control equipment. A single PLL-based multiplexer with four true outputs reduces the number of discrete clock components and provides a clear central point for distributing a selected reference. The 200 MHz capability is useful for digital control subsystems operating below that limit, although the industrial system's temperature, supply, and EMC requirements must be checked against the exact ordering suffix. Keep the clock network isolated from noisy switching paths and validate performance across line conditions.

📺

Data Converter Clock Fanout

The ICS581G-02 can provide synchronized clock outputs to multiple data converters and related digital processing stages. Four true outputs allow several converter clock pins to be driven from a common timing source without adding separate buffer packages. The zero-delay design helps preserve the intended relationship between input and output clocks, while glitch-free multiplexing supports controlled source selection. The actual suitability depends on converter setup-and-hold limits, converter input-jitter requirements, trace skew, and the number and capacitance of connected loads.

🔧

Test and Measurement Equipment

The ICS581G-02 is useful in instrumentation that must distribute a stable reference clock to acquisition, processing, and conversion sections. Four outputs support a compact multi-load topology, while the PLL-based zero-delay arrangement helps maintain predictable clock relationships across the system. For instruments sensitive to source-to-output delay and edge quality, route each output over a continuous plane and avoid unnecessary stubs. Verify the instrument's allowable jitter, skew, clock amplitude, and maximum operating frequency before selecting the exact ordering suffix.

💾

Processor and Memory Clock Networks

A four-output ICS581G-02 can serve processor, memory, peripheral, and bus-interface clock networks where multiple loads require a common source. Its 200 MHz specification and zero-delay classification make it appropriate for moderate-speed systems, while the integrated multiplexer reduces discrete component count. The designer should account for simultaneous-switching noise, supply sensitivity, output jitter, and per-receiver timing margins. Keep clock traces short where practical and use matched routing so the device's fanout advantage is not lost to board-induced skew.

Önerilen Ürünler Özeti

ICS581G-02 Renesas Electronics Kullanıldığı Yer: FPGA Clock Distribution, Communications Clock Routing, Industrial Control Systems, Data Converter Clock Fanout, Test and Measurement Equipment, Processor and Memory Clock Networks ICS581G-02ILF Orderable family variant for design evaluation Kullanıldığı Yer: FPGA Clock Distribution, Processor and Memory Clock Networks ICS581G-02LF Same-family orderable variant Kullanıldığı Yer: Communications Clock Routing ICS581G-02IT Same-family ordering variant Kullanıldığı Yer: Industrial Control Systems ICS581G-02T Same-family orderable variant Kullanıldığı Yer: Data Converter Clock Fanout ICS581G-02I Same-family ordering variant Kullanıldığı Yer: Test and Measurement Equipment
What is the operating frequency of the ICS581G-02?
The Renesas Electronics ICS581G-02 operates at up to 200 MHz. According to the Renesas product listing and manufacturer-related ICS581G-02 documentation, the device is a PLL-based, zero-delay glitch-free clock multiplexer and fanout buffer. Its 200 MHz rating makes it suitable for clock-distribution circuits operating at or below that frequency. Designers should also verify input pulse-width, output timing, supply-voltage, and loading limits in the manufacturer datasheet before operating the device near its maximum stated frequency.
What type of clock device is ICS581G-02?
The ICS581G-02 is a PLL-based, zero-delay glitch-free clock multiplexer with four true outputs. The ICS581 family documentation describes the device as a clock multiplexer that provides zero delay from input to output, while distributor technical listings classify it as a fanout or zero-delay buffer. This combination allows one package to select a clock source and distribute the resulting signal to multiple destinations. It belongs to the clock-generation, clock-buffer, and timing-IC category.
How many outputs does the ICS581G-02 provide?
The ICS581G-02 provides four true, non-inverted clock outputs and no inverted outputs. This four-output fanout allows several receiving circuits to share a controlled clock source while reducing the component count associated with separate one-output buffers. Each output still requires correct termination and trace loading in the final PCB design. Confirm output-drive strength, capacitive-load limits, and per-pin signal-integrity requirements against the manufacturer datasheet before connecting high-load or long-trace networks.
Where can I download the ICS581G-02 datasheet PDF?
The ICS581G-02 datasheet is available through the linked manufacturer-related documentation and the ICS581G-02 datasheet index on AllDataSheet. The official Renesas product documentation is the preferred source for production design decisions. Use the pin-description table, timing diagrams, electrical characteristics, and recommended layout information to confirm pin assignments and operating limits. The linked AllDataSheet page is useful for locating the underlying ICS581 datasheet, but engineers should verify document revisions and final electrical ratings against the latest manufacturer material.
Where can I find the ICS581G-02 pinout?
The ICS581G-02 uses a 16-pin TSSOP package, and its complete pin assignment must be taken from the manufacturer datasheet pin-description table. The package is identified as a 16-pin, 0.65 mm-pitch PDSO16 outline with a 4.40 mm body width. Do not infer pin functions from the four-output description alone because input clocks, power, ground, control, and feedback connections can have specific assignments. Review the numbering orientation and exposed package details before routing the PCB.
What is the ICS581G-02 package?
The ICS581G-02 is supplied in a 16-pin TSSOP package identified as PDSO16, with a 0.65 mm lead pitch and a 4.40 mm package width. The surface-mount format is suitable for compact digital and timing designs and can be assembled with standard fine-pitch PCB processes. Package dimensions and land patterns should be taken from the manufacturer drawing rather than inferred solely from the distributor title. Pin numbering and pin 1 orientation should likewise be checked against the selected package symbol.
Can the ICS581G-02 distribute clocks to four loads?
Yes, the ICS581G-02 is designed for fanout operation and provides four true outputs. It is particularly useful when a clock must reach several processors, converters, memory devices, or communications blocks from one source. The four outputs should be routed with controlled impedance and balanced geometry to minimize output-to-output skew and edge distortion. Confirm each output's capacitive-load capability and the maximum system operating frequency in the manufacturer datasheet before assigning all four outputs to the same clock domain.
What is the difference between ICS581G-02 and ICS581G-02ILF?
ICS581G-02ILF is an ordering variant of the same Renesas ICS581G-02 device family, and both listings identify a 200 MHz, 16-pin TSSOP zero-delay clock multiplexer. The suffix distinctions normally identify orderable packaging, temperature, or qualification characteristics rather than a different buffer function. Confirm the exact ordering table, temperature grade, shipping format, and lifecycle status in the manufacturer datasheet before substituting one suffix for another. The verified listing supports family-level functional equivalence, but not every suffix-specific certification claim.
Is ICS581G-02 suitable for an FPGA clock-distribution design?
The ICS581G-02 can suit an FPGA clock-distribution design when the clock is at or below 200 MHz and the device is configured according to the manufacturer timing requirements. Its PLL-based, zero-delay, glitch-free multiplexing and four-output fanout can reduce the number of separate clock distribution components. FPGA designs still require careful treatment of clock topology, output loading, board skew, and power-supply noise. Confirm the FPGA input timing budget, allowable jitter, and clock-input topology before committing to the device.
When should I choose ICS581G-02 over a basic clock buffer?
Choose the ICS581G-02 when the design needs both controlled clock-source selection and four-way distribution in one package. A basic clock buffer is generally preferable when only one source feeds multiple destinations and source multiplexing or PLL-based operation is unnecessary. The ICS581G-02 adds dedicated clock-management functionality, but its timing, control, and input-selection requirements must be evaluated carefully. The right choice depends on the required frequency, jitter budget, source-switching behavior, output count, and board topology.
What can replace the ICS581G-02?
The verified ICS581G-02 ordering variants include ICS581G-02I, ICS581G-02ILF, ICS581G-02IT, ICS581G-02LF, and ICS581G-02T, all associated with the 16-pin TSSOP device family. These are the most direct same-brand candidates for a drop-in review because the listings associate them with the same 200 MHz zero-delay clock-multiplexer function and package. Before replacement, verify exact pin assignment, temperature grade, supply range, timing limits, and qualification markings; a shared package alone does not guarantee production equivalence.
What is the best cross-brand equivalent for the ICS581G-02?
No verified cross-brand drop-in equivalent is established for the ICS581G-02. The cross-reference results provide search tools and family comparisons but do not identify a different manufacturer's part with a documented identical pinout and comparable operating characteristics. Engineers should not substitute a generic clock buffer solely because it has four outputs and a similar package. A valid cross-brand replacement would require documented pin compatibility, frequency, voltage, jitter, output count, control logic, and RoHS status matching the intended application.
Is ICS581G-02 the same as ICS581G-02LF?
ICS581G-02LF is a suffix-qualified ordering version within the ICS581G-02 family, and the available listing describes the same 200 MHz, 16-pin TSSOP zero-delay clock-multiplexer category. The suffix can encode production and orderable characteristics, so the safe procedure is to compare the manufacturer ordering table and datasheet rather than assume every electrical detail is identical. Confirm temperature range, package shipping form, qualification, and marking before using either MPN interchangeably in a released design.
How do I compare the ICS581G-02 with an alternative clock multiplexer?
Compare the ICS581G-02 with an alternative by checking maximum frequency, supply-voltage range, input and output counts, jitter, insertion delay, output skew, glitch behavior, control-interface logic, package, and pinout. The ICS581G-02 is characterized as a PLL-based, zero-delay, glitch-free multiplexer with four true outputs in a 16-pin TSSOP package. A valid drop-in replacement must match the PCB land pattern and function correctly at the intended 200 MHz or lower operating point. Pin compatibility alone is insufficient when timing or control behavior differs.
Where can I buy ICS581G-02 and what is its lead time?
Use the Request a Quote form on this page to request the current availability, minimum order quantity, delivery schedule, and unit pricing for the exact ICS581G-02 ordering suffix. Distributor listings describe the component as orderable and link to manufacturer technical information, but they do not provide a stable, comparable lead-time statement for every region and quantity. A purchase inquiry should specify the required suffix, quantity, target delivery date, and whether reel, tray, or another approved shipping format is required.
What are the key specifications of the ICS581G-02 that engineers should know?
The ICS581G-02 is a 200 MHz, PLL-based, zero-delay glitch-free clock multiplexer and fanout buffer with four true outputs and no inverted outputs. It is packaged in a 16-pin, 0.65 mm-pitch TSSOP measuring 4.40 mm wide. The manufacturer-related documentation identifies the device as RoHS compliant and describes a zero-delay input-to-output architecture. Supply voltage, temperature range, input count, jitter, skew, and detailed timing values must be confirmed in the manufacturer datasheet before layout or production qualification.

Mühendislik referans verileri: ICS581G-02 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the ICS581G-02 when a design requires a PLL-based, zero-delay, glitch-free clock multiplexer with four true outputs at up to 200 MHz in a 16-pin TSSOP package. It is especially useful in FPGA, processor, communications, data-converter, and instrumentation clock trees where one source must reach several loads without using separate buffers. The verified same-family alternatives are primarily ordering suffixes; select among them by checking the manufacturer ordering table for temperature grade, shipping format, qualification, and marking rather than assuming every suffix is interchangeable. A basic clock buffer is preferable when source multiplexing and PLL-based operation are unnecessary. A cross-brand substitution should be considered only after its pinout, supply range, input count, timing, jitter, output loading, and control logic have been documented as compatible. For all options, verify the exact datasheet revision and perform signal-integrity testing at the intended frequency.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün ICS581G-02ILF ICS581G-02LF ICS581G-02I ICS581G-02IT ICS581G-02T
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 16-TSSOP 16-TSSOP - same 16-TSSOP - same 16-TSSOP - same 16-TSSOP - same 16-TSSOP - same
Maximum Stated Frequency 200 MHz 200 MHz 200 MHz 200 MHz 200 MHz 200 MHz
Device Category Fanout buffer, zero-delay buffer, and glitch-free clock multiplexer Fanout buffer, zero-delay buffer, and glitch-free clock multiplexer ICS581G zero-delay clock-multiplexer family ICS581G zero-delay clock-multiplexer family Clock buffer and distribution device ICS581G zero-delay clock-multiplexer family
Number of True Outputs 4 outputs 4 outputs 4 outputs 4 outputs 4 outputs 4 outputs
Package Width 4.40 mm 4.40 mm 4.40 mm 4.40 mm 4.40 mm 4.40 mm
Lead Pitch 0.65 mm 0.65 mm 0.65 mm 0.65 mm 0.65 mm 0.65 mm

Ana Farklılayıcılar

  • Combines zero-delay multiplexing with four-output fanout (karşılaştırma:ICS581G-02ILF)
  • Provides four non-inverted clock outputs from one package (karşılaştırma:ICS581G-02LF)
  • Supports controlled clock-source selection without intentional input-to-output delay (karşılaştırma:ICS581G-02I)
  • Combines four clock outputs in a compact 0.65 mm-pitch TSSOP (karşılaştırma:ICS581G-02IT)

Tasarım Notları

Route clock inputs and outputs over a continuous reference plane and keep branches short. Use matched geometry for outputs serving equivalent loads, avoid unnecessary test-point stubs, and place the device close to the receiving clock inputs. The four outputs should not be routed as unequal fanouts if minimum output-to-output skew is important. Use the manufacturer pin-description and recommended-layout material to confirm the intended connection of every TSSOP lead.

Confirm output rise time, edge rate, capacitive-load tolerance, jitter, and maximum operating frequency before enabling all four outputs at 200 MHz. Long traces, unequal loading, and nearby switching nodes can degrade clock quality even when the nominal fanout count is supported. Maintain a continuous return path beneath clock routes and observe the device's source and load rules. A scope measurement at each receiver is appropriate when the design has tight setup-time, skew, or jitter margins.

Do not treat an ordering suffix as interchangeable until the manufacturer ordering table has been checked for temperature grade, shipping form, qualification, and marking. The verified family listings support common 16-TSSOP package and 200 MHz function, but they do not establish every suffix-specific electrical or compliance detail. Also avoid assuming that a general four-output clock buffer is a drop-in replacement; pin assignments, control logic, PLL behavior, and timing characteristics must match the ICS581G-02 design.

Follow the manufacturer's bypass and power-routing recommendations for the exact ICS581G-02 ordering option. Place the required decoupling capacitance close to the supply and ground pins, provide a low-impedance supply connection, and keep high-current return paths away from clock inputs. The verified product summaries do not state the supply-voltage range or recommended capacitor values, so these must be obtained from the manufacturer datasheet before component selection and PCB release.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The ICS581G family cross-reference information identifies the PDSO16 package as RoHS compliant. No verified information establishes REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this exact ordering suffix.

Veri doğrulanma tarihi: 2026-11-16 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

ICS581G-02 datasheet ICS581G-02 pinout ICS581G-02 datasheet pdf ICS581G-02 equivalent ICS581G-02 replacement ICS581G-02 cross reference ICS581G-02 footprint ICS581G-02 application circuit ICS581G-02 price ICS581G-02 stock Renesas ICS581G-02 ICS581G-02 vs ICS581G-02ILF 200MHz zero delay clock multiplexer ICS581G 16-TSSOP pinout

İlgili Bileşenler ve Terimler

Renesas Electronics ICS581G-02 ICS581G-02ILF ICS581G-02LF ICS581G-02I ICS581G-02IT ICS581G-02T clock multiplexer fanout buffer zero-delay buffer PLL-based clock distribution glitch-free clock clock and timing IC frequency divider 200 MHz four true outputs zero insertion delay TSSOP-16 PDSO16 surface-mount package clock skew clock jitter FPGA clock distribution communications clock routing data-converter clock fanout
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle