ICS601R-25 - 156MHz 1:5 Clock Multiplier | Renesas
MPN: ICS601R-25 ✓ AktifICS601R-25 Genel Bakış
A clock multiplier is a clock-and-timing IC that generates an output clock from an external reference. It belongs to the broader timing-control hierarchy of clock generators, phase-locked loops, frequency synthesizers, and CMOS clock distribution. Unlike a free-running oscillator, the ICS601R-25 requires an external input clock and preserves the relationship between input and output edges, making it useful when an existing system clock must be multiplied while maintaining predictable phase and timing relationships.
The ICS601R-25 is identified as a low-cost, low-phase-noise, high-performance clock synthesizer. Its five-times multiplication ratio and 156 MHz maximum output frequency make it suitable for communications, industrial control, consumer electronics, and digital systems that need a distributed clock derived from a stable reference. The low-skew and low-jitter characteristics are particularly relevant when multiple downstream circuits must operate from a common multiplied clock.
Because the device uses a multiplier rather than a conventional fractional-N PLL, its design is centered on preserving the incoming reference relationship while producing a higher-frequency output. Power-supply design, output clock routing, and reference-clock stability remain the primary engineering considerations. Short traces, controlled return paths, and appropriate decoupling help prevent supply and trace effects from degrading the clock edge presented to the load.
Typical uses include clock generation for communications equipment, digital controllers, data-processing systems, and low-skew fanout networks. The external reference permits the system designer to define timing accuracy and jitter performance primarily through the reference source and interconnect design. This makes the ICS601R-25 appropriate where multiplying an established system clock is preferable to adding another independent oscillator.
For PCB implementation, place the decoupling capacitor adjacent to the supply pin and route the reference and output-clock nets away from noisy switching nodes. Preserve a continuous ground reference beneath the clock path, and terminate unused outputs according to the manufacturer's recommendations. Validate output frequency, duty cycle, edge quality, and fanout behavior in the final board environment.
This product page combines the manufacturer function description, package information, order-code distinctions, and practical clock-design guidance. It also organizes drop-in comparisons and selection questions around the practical constraints engineers face when replacing or sourcing a 1:5, 156 MHz CMOS clock multiplier.
Drop-in alternatifler için ICS601R-25 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
ICS601R-25I
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ICS601R-25T
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ICS601R-25ILFT
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ICS601R-25LF
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ICS601R-25 Özellikler
| Product Type | CMOS clock multiplier |
| Maximum Output Frequency | 156 MHz |
| Multiplication Ratio | 1:5 |
| Çıkış Konfigürasyonu | 1 clock output |
| Input Clock Type | External reference clock |
| Output Logic | CMOS |
| Phase Noise | Low phase noise |
| Jitter | Low jitter |
| Clock Skew | Low skew |
| Paket | 20-pin SSOP, 3.90 mm width |
| Montaj Türü | Surface mount |
ICS601R-25 20-pin ssop, 3.90 mm width Pin Yapısı Kılavuzu
ICS601R-25 (20-pin ssop, 3.90 mm width paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: ICS601R-25.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ICS601R-25 için uygundur 6 uygulamas: Communications Clock Fanout, Industrial Control Timing, Digital Processor Clocking, Data Acquisition and ADC Timing, Consumer Electronics Timing, Synchronous Peripheral Fanout.
Communications Clock Fanout
The ICS601R-25 fits communications equipment that already has a stable reference clock but requires a higher-frequency clock for digital logic. Its 1:5 multiplication ratio and 156 MHz maximum output provide a fixed relationship to the reference, while the low phase noise, low jitter, and low-skew characteristics support cleaner clock edges. Place the multiplier before the fanout network, keep the reference route short, and match branch geometry to limit skew between receivers.
Önerilen
Industrial Control Timing
The ICS601R-25 is appropriate for industrial controllers that derive multiple digital clock domains from a shared reference and need a fixed five-times multiplication ratio. The 156 MHz ceiling supports moderate-speed control and data-processing logic without requiring a programmable PLL. Low jitter and low skew are valuable when actuator timing, sampling, and sequential logic must remain aligned. Validate the final board across temperature and supply tolerance before freezing the clock architecture.
Önerilen
Digital Processor Clocking
A digital processor can use the ICS601R-25 to derive a 156 MHz maximum clock from a lower-frequency reference when a fixed five-times relationship is sufficient. This arrangement avoids adding programmable PLL settings to every power state and retains the deterministic phase relationship of a direct multiplier. Keep the reference and output routes short, maintain a continuous return path, and verify duty-cycle distortion at the processor clock input under realistic load.
Önerilen
Data Acquisition and ADC Timing
The ICS601R-25 can provide a fixed multiplied clock for sampling systems where the source reference has been characterized for phase noise and jitter. The 156 MHz maximum output allows higher-rate sampling timing to be derived while the low-skew characteristic supports more consistent relationships between sampling and conversion circuits. Use short, matched clock routes and separate analog and digital return currents to prevent clock energy from coupling into the measurement front end.
Önerilen
Consumer Electronics Timing
The ICS601R-25 is suitable for consumer products that need to multiply an established low-frequency reference into a clock for internal logic. Its fixed 1:5 ratio simplifies clock planning compared with a programmable synthesizer, while low jitter and low skew help preserve timing quality in audio, display, or control subsystems. Confirm the reference frequency, supply voltage, output loading, and package footprint against the manufacturer requirements before incorporating the part.
Önerilen
Synchronous Peripheral Fanout
The ICS601R-25 can feed several synchronous peripherals with a common multiplied clock when low edge-to-edge variation is important. Its one-to-five multiplication function generates a higher-rate clock from a common source and its low-skew characterization helps maintain consistent timing among parallel destinations. Keep branches short and matched, maintain solid ground-plane continuity, and verify that each load remains within the output drive and fanout limits for the selected grade.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ICS601R-25 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ICS601R-25I | ICS601R-25T | ICS601R-25ILFT | ICS601R-25LF |
|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 20-SSOP (3.90 mm width) | 20-SSOP (3.90 mm width) - same | 20-SSOP (3.90 mm width) - same | 20-SSOP (3.90 mm width) - same | 20-SSOP (3.90 mm width) - same |
| Product Type | CMOS clock multiplier | CMOS clock multiplier | CMOS clock multiplier | CMOS clock multiplier | CMOS clock multiplier |
| Multiplication Ratio | 1:5 | 1:5 | 1:5 | 1:5 | 1:5 |
| Maximum Output Frequency | 156 MHz | 156 MHz | 156 MHz | 156 MHz | 156 MHz |
| Output Count | 1 | 1 | 1 | 1 | 1 |
| Phase Noise | Low phase noise | Low phase noise | Low phase noise | Low phase noise | Low phase noise |
| Jitter | Low jitter | Low jitter | Low jitter | Low jitter | Low jitter |
| Clock Skew | Low skew | Low skew | Low skew | Low skew | Low skew |
Ana Farklılayıcılar
- Fixed five-times multiplication provides a direct clock-conversion path (karşılaştırma:ICS601R-25I)
- Low phase noise supports cleaner reference-derived clocking (karşılaştırma:ICS601R-25T)
- Low-jitter and low-skew fanout characteristics suit synchronous loads (karşılaştırma:ICS601R-25ILFT)
Tasarım Notları
Treat the reference and multiplied clock as controlled-impedance timing nets. Route them over a continuous ground reference, minimize stub branches, and match the geometry of fanout paths where receiver-to-receiver skew is important. Keep the reference away from switch-node copper and high-current return paths because displacement current from adjacent power circuitry can couple into the clock edge.
Place the local supply-decoupling capacitor at the ICS601R-25 supply and ground pins using the shortest practical connection. Provide a low-impedance ground return rather than routing clock current through a narrow signal trace. Confirm the physical pin orientation and exposed assembly constraints against the manufacturer package drawing before releasing artwork, especially when selecting an order-code variant.
Do not assume every ICS601R-25 suffix has identical purchasing or manufacturing conditions. Verify grade, temperature range, packing, lead-free status, and marking against the Renesas ordering table. Also confirm that the external reference frequency produces the intended output without exceeding the 156 MHz limit and that the input and output timing specifications remain valid at the selected load.
Uyumluluk Bilgisi
No explicit compliance declaration was identified. Lead-free processing may be associated with a specific order-code suffix, but the exact suffix requirements must be checked in the Renesas ordering information.