Renesas Electronics

ICS601R-25 - 156MHz 1:5 Clock Multiplier | Renesas

N.º da peça: ICS601R-25 ✓ Ativo
20-pin SSOP, 3.90 mm width Package 156 MHz Speed
MOQ: 1 |

ICS601R-25 Visão geral

Renesas Electronics ICS601R-25 is a CMOS clock multiplier that multiplies an input clock by five, with a listed maximum output frequency of 156 MHz, and is packaged in a 20-pin SSOP. The device is intended for systems requiring low phase noise, low jitter, and low-skew clock distribution. Its one-to-five multiplication ratio allows a comparatively low-frequency reference to drive a higher-frequency clock without requiring a large PLL multiplier ratio.

A clock multiplier is a clock-and-timing IC that generates an output clock from an external reference. It belongs to the broader timing-control hierarchy of clock generators, phase-locked loops, frequency synthesizers, and CMOS clock distribution. Unlike a free-running oscillator, the ICS601R-25 requires an external input clock and preserves the relationship between input and output edges, making it useful when an existing system clock must be multiplied while maintaining predictable phase and timing relationships.

The ICS601R-25 is identified as a low-cost, low-phase-noise, high-performance clock synthesizer. Its five-times multiplication ratio and 156 MHz maximum output frequency make it suitable for communications, industrial control, consumer electronics, and digital systems that need a distributed clock derived from a stable reference. The low-skew and low-jitter characteristics are particularly relevant when multiple downstream circuits must operate from a common multiplied clock.

Because the device uses a multiplier rather than a conventional fractional-N PLL, its design is centered on preserving the incoming reference relationship while producing a higher-frequency output. Power-supply design, output clock routing, and reference-clock stability remain the primary engineering considerations. Short traces, controlled return paths, and appropriate decoupling help prevent supply and trace effects from degrading the clock edge presented to the load.

Typical uses include clock generation for communications equipment, digital controllers, data-processing systems, and low-skew fanout networks. The external reference permits the system designer to define timing accuracy and jitter performance primarily through the reference source and interconnect design. This makes the ICS601R-25 appropriate where multiplying an established system clock is preferable to adding another independent oscillator.

For PCB implementation, place the decoupling capacitor adjacent to the supply pin and route the reference and output-clock nets away from noisy switching nodes. Preserve a continuous ground reference beneath the clock path, and terminate unused outputs according to the manufacturer's recommendations. Validate output frequency, duty cycle, edge quality, and fanout behavior in the final board environment.

This product page combines the manufacturer function description, package information, order-code distinctions, and practical clock-design guidance. It also organizes drop-in comparisons and selection questions around the practical constraints engineers face when replacing or sourcing a 1:5, 156 MHz CMOS clock multiplier.

Alternativas drop-in para ICS601R-25 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

ICS601R-25I

✅ Drop-In
📦 20-SSOP (3.90 mm width)
Same 1:5 ratio, 156 MHz maximum output, and 20-SSOP package; order-code grade differs by 0% in the documented core parameters

📋 Alternativa de referência (fora do catálogo)

ICS601R-25T

✅ Drop-In
📦 20-SSOP (3.90 mm width)
Same 1:5 ratio, 156 MHz maximum output, and 20-SSOP package; packing suffix differs with 0% change in documented core parameters

📋 Alternativa de referência (fora do catálogo)

ICS601R-25ILFT

✅ Drop-In
📦 20-SSOP (3.90 mm width)
Same 1:5 ratio, 156 MHz maximum output, and 20-SSOP package; grade, packing, and lead-free suffix distinctions differ with 0% documented core-parameter change

📋 Alternativa de referência (fora do catálogo)

ICS601R-25LF

✅ Drop-In
📦 20-SSOP (3.90 mm width)
Same 1:5 ratio, 156 MHz maximum output, and 20-SSOP package; lead-free order-code suffix differs with 0% documented core-parameter change

📋 Alternativa de referência (fora do catálogo)

ICS601R-25 Especificações

Product Type CMOS clock multiplier
Maximum Output Frequency 156 MHz
Multiplication Ratio 1:5
Configuração de saída 1 clock output
Input Clock Type External reference clock
Output Logic CMOS
Phase Noise Low phase noise
Jitter Low jitter
Clock Skew Low skew
Encapsulamento 20-pin SSOP, 3.90 mm width
Tipo de montagem Surface mount

Guia de Configuração de Pinos do ICS601R-25 20-pin ssop, 3.90 mm width

Configuração de pinos para ICS601R-25 (pacote 20-pin ssop, 3.90 mm width). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 20-pin ssop, 3.90 mm width para ICS601R-25

Nenhum dado detalhado de pinagem disponível para ICS601R-25.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ICS601R-25 é adequado para 6 aplicaçãos: Communications Clock Fanout, Industrial Control Timing, Digital Processor Clocking, Data Acquisition and ADC Timing, Consumer Electronics Timing, Synchronous Peripheral Fanout.

🌐

Communications Clock Fanout

The ICS601R-25 fits communications equipment that already has a stable reference clock but requires a higher-frequency clock for digital logic. Its 1:5 multiplication ratio and 156 MHz maximum output provide a fixed relationship to the reference, while the low phase noise, low jitter, and low-skew characteristics support cleaner clock edges. Place the multiplier before the fanout network, keep the reference route short, and match branch geometry to limit skew between receivers.

🏭

Industrial Control Timing

The ICS601R-25 is appropriate for industrial controllers that derive multiple digital clock domains from a shared reference and need a fixed five-times multiplication ratio. The 156 MHz ceiling supports moderate-speed control and data-processing logic without requiring a programmable PLL. Low jitter and low skew are valuable when actuator timing, sampling, and sequential logic must remain aligned. Validate the final board across temperature and supply tolerance before freezing the clock architecture.

🖥️

Digital Processor Clocking

A digital processor can use the ICS601R-25 to derive a 156 MHz maximum clock from a lower-frequency reference when a fixed five-times relationship is sufficient. This arrangement avoids adding programmable PLL settings to every power state and retains the deterministic phase relationship of a direct multiplier. Keep the reference and output routes short, maintain a continuous return path, and verify duty-cycle distortion at the processor clock input under realistic load.

📺

Data Acquisition and ADC Timing

The ICS601R-25 can provide a fixed multiplied clock for sampling systems where the source reference has been characterized for phase noise and jitter. The 156 MHz maximum output allows higher-rate sampling timing to be derived while the low-skew characteristic supports more consistent relationships between sampling and conversion circuits. Use short, matched clock routes and separate analog and digital return currents to prevent clock energy from coupling into the measurement front end.

📱

Consumer Electronics Timing

The ICS601R-25 is suitable for consumer products that need to multiply an established low-frequency reference into a clock for internal logic. Its fixed 1:5 ratio simplifies clock planning compared with a programmable synthesizer, while low jitter and low skew help preserve timing quality in audio, display, or control subsystems. Confirm the reference frequency, supply voltage, output loading, and package footprint against the manufacturer requirements before incorporating the part.

🔧

Synchronous Peripheral Fanout

The ICS601R-25 can feed several synchronous peripherals with a common multiplied clock when low edge-to-edge variation is important. Its one-to-five multiplication function generates a higher-rate clock from a common source and its low-skew characterization helps maintain consistent timing among parallel destinations. Keep branches short and matched, maintain solid ground-plane continuity, and verify that each load remains within the output drive and fanout limits for the selected grade.

What is the ICS601R-25?
The Renesas ICS601R-25 is a low-cost, low-phase-noise CMOS clock multiplier that multiplies an external reference clock by five and supports output frequencies up to 156 MHz. According to the Renesas 601-25 datasheet, it is intended for applications requiring low phase noise, low jitter, and low-skew fanout. It is packaged in a 20-pin SSOP with a stated body width of 3.90 mm.
What is the multiplication ratio of ICS601R-25?
The ICS601R-25 has a 1:5 multiplication ratio, meaning its output clock runs at five times the external reference frequency. The manufacturer describes it as a low-phase-noise clock multiplier, while distributor technical listings identify a maximum output frequency of 156 MHz. This ratio makes it useful when a system must raise an existing clock frequency while retaining a fixed relationship to the source reference.
Where can I download the ICS601R-25 datasheet PDF?
The ICS601R-25 datasheet is available from the official Renesas document page at https://www.renesas.com/en/document/dst/601-25-datasheet. The manufacturer page identifies the ICS601-25 as a low-cost, low-phase-noise, high-performance clock synthesizer for low-jitter and low-skew fanout applications. Use the manufacturer's pin-description and application information when assigning PCB functions and calculating the reference-clock requirements.
Where can I find the ICS601R-25 pinout?
The ICS601R-25 uses a 20-pin SSOP, and its authoritative pin assignments are shown in the Renesas 601-25 datasheet at https://www.renesas.com/en/document/dst/601-25-datasheet. Use the pin-description table and package drawing for PCB routing, especially when identifying supply, ground, reference-input, and clock-output connections. Verify pin numbering against the chosen orderable variant before fabrication.
What are the key specifications of ICS601R-25?
The key ICS601R-25 specifications are a 1:5 clock multiplication ratio, a maximum output frequency of 156 MHz, one clock output, and a 20-pin SSOP package. The Renesas datasheet describes the device as a low-cost CMOS clock synthesizer with low phase noise, low jitter, and low-skew fanout characteristics. Its output frequency is derived from an external reference clock rather than an internal resonator.
What clock applications suit ICS601R-25?
The ICS601R-25 suits communications equipment, industrial controllers, digital processors, and low-skew clock-fanout systems that already have a reference clock and need a five-times higher output. Its 156 MHz maximum output supports moderate-speed digital clocking, while the low-jitter and low-skew characteristics make it preferable to improvised divider or gate-based frequency multiplication when edge quality matters.
Can ICS601R-25 replace ICS601R-25I?
The ICS601R-25I is a close order-code alternative for the ICS601R-25 because both are identified as 1:5, 156 MHz clock multipliers in 20-pin SSOP packages. The available cross-reference records confirm the matching device type and package, while temperature-grade details should be checked against the manufacturer ordering information before production use. The suffix may identify grade, packing, or lead-free processing rather than a functional change.
Is ICS601R-25 the same as ICS601R-25T?
The ICS601R-25 and ICS601R-25T are identified as the same 1:5 clock-multiplier function in the 20-pin SSOP package. The T suffix is an order-code distinction and should be evaluated according to the manufacturer's ordering table, which may define differences in packing or shipment form. Confirm the required production configuration and traceability requirements before treating the two order codes as interchangeable.
What is the best drop-in replacement for ICS601R-25?
The closest documented drop-in choice for the ICS601R-25 is the Renesas ICS601R-25I, which is listed as a 1:5, 156 MHz clock multiplier in the same 20-pin SSOP package. Other documented order codes include ICS601R-25T, ICS601R-25ILFT, and ICS601R-25LF. Pin compatibility, electrical ratings, grade, and packing should still be confirmed against the Renesas datasheet and ordering table before substitution.
What can replace ICS601R-25 on the same PCB footprint?
The documented same-footprint candidates are the Renesas ICS601R-25I, ICS601R-25T, ICS601R-25ILFT, and ICS601R-25LF order variants. Each appears in the same 1:5 clock-multiplier family and is associated with the 20-pin SSOP implementation. These are order-code alternatives rather than functionally different multiplier designs, so review grade, temperature, packing, and marking requirements before production substitution.
When should I choose ICS601R-25 over a PLL-based clock generator?
Choose the ICS601R-25 when the design has a sufficiently clean reference clock and only requires a fixed five-times multiplication. Its direct multiplier architecture can provide a straightforward path to a 156 MHz output without programmable PLL configuration. Select a PLL-based generator instead when fractional multiplication, programmable frequencies, locking control, or digitally adjustable output ratios are required.
Is ICS601R-25 suitable for low-skew clock fanout?
The ICS601R-25 is specifically described by Renesas for applications requiring low phase noise, low jitter, and low-skew fanout. It can therefore serve as the clock-multiplication stage feeding multiple sequential loads. Actual skew at the receiver depends on trace length matching, supply integrity, loading, and output drive, so use matched routing and verify timing at the system level.
What is the lead time for ICS601R-25?
Current production lead time and minimum order quantity should be requested through the Request a Quote form on this page. The manufacturer describes the ICS601-25 as a low-cost clock multiplier, but a product description does not establish current allocation, fabrication capacity, or delivery scheduling. Provide the required quantity, package, and target date with the quote request to obtain the applicable schedule.
Is ICS601R-25 in stock?
Current stock status should be confirmed through the Request a Quote form on this page. The existence of a current distributor listing does not by itself guarantee a fixed stock quantity or immediate shipment for every order code. Include the exact MPN, quantity, and required delivery date so the order can be matched to the appropriate supply channel.
Where can I buy ICS601R-25 online?
Use the Request a Quote form on this page to request ICS601R-25 availability, pricing, and lead time for the exact quantity required. Because suffix codes can represent grade, packing, or lead-free configuration, include the full orderable MPN when requesting a quotation. This avoids selecting a variant that differs from the intended 20-pin SSOP assembly requirement.
How should the ICS601R-25 reference clock be routed?
Route the ICS601R-25 reference clock over a short, continuous path with a solid ground reference and keep it away from switching-power nodes and high-current return paths. Place the supply-decoupling capacitor close to the device and preserve the manufacturer pinout for input and output connections. If fanout is significant, use matched geometry for clock branches and validate edge rate, duty cycle, and skew after layout.

Dados de referência de engenharia para ICS601R-25 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the ICS601R-25 when the design requires a fixed five-times clock multiplication, an output up to 156 MHz, and low phase noise, jitter, and skew without programmable PLL features. The ICS601R-25I is a close option when its documented grade and order-code terms satisfy the assembly, while ICS601R-25T, ICS601R-25ILFT, and ICS601R-25LF provide same-footprint order-code choices for packing, temperature, or lead-free requirements. Treat the suffix meanings as an engineering distinction rather than assuming every code is interchangeable. A PLL-based clock generator is the better architecture when output frequency must be programmable, fractional multiplication is needed, or multiple unrelated output ratios are required. Before release, verify the exact suffix definitions, operating-temperature grade, supply limits, reference-frequency range, pin assignments, and lifecycle commitment against the Renesas documentation.

Comparação com alternativas

Parâmetro Este produto ICS601R-25I ICS601R-25T ICS601R-25ILFT ICS601R-25LF
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 20-SSOP (3.90 mm width) 20-SSOP (3.90 mm width) - same 20-SSOP (3.90 mm width) - same 20-SSOP (3.90 mm width) - same 20-SSOP (3.90 mm width) - same
Product Type CMOS clock multiplier CMOS clock multiplier CMOS clock multiplier CMOS clock multiplier CMOS clock multiplier
Multiplication Ratio 1:5 1:5 1:5 1:5 1:5
Maximum Output Frequency 156 MHz 156 MHz 156 MHz 156 MHz 156 MHz
Output Count 1 1 1 1 1
Phase Noise Low phase noise Low phase noise Low phase noise Low phase noise Low phase noise
Jitter Low jitter Low jitter Low jitter Low jitter Low jitter
Clock Skew Low skew Low skew Low skew Low skew Low skew

Principais diferenciais

  • Fixed five-times multiplication provides a direct clock-conversion path (vs ICS601R-25I)
  • Low phase noise supports cleaner reference-derived clocking (vs ICS601R-25T)
  • Low-jitter and low-skew fanout characteristics suit synchronous loads (vs ICS601R-25ILFT)

Notas de projeto

Treat the reference and multiplied clock as controlled-impedance timing nets. Route them over a continuous ground reference, minimize stub branches, and match the geometry of fanout paths where receiver-to-receiver skew is important. Keep the reference away from switch-node copper and high-current return paths because displacement current from adjacent power circuitry can couple into the clock edge.

Place the local supply-decoupling capacitor at the ICS601R-25 supply and ground pins using the shortest practical connection. Provide a low-impedance ground return rather than routing clock current through a narrow signal trace. Confirm the physical pin orientation and exposed assembly constraints against the manufacturer package drawing before releasing artwork, especially when selecting an order-code variant.

Do not assume every ICS601R-25 suffix has identical purchasing or manufacturing conditions. Verify grade, temperature range, packing, lead-free status, and marking against the Renesas ordering table. Also confirm that the external reference frequency produces the intended output without exceeding the 156 MHz limit and that the input and output timing specifications remain valid at the selected load.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No explicit compliance declaration was identified. Lead-free processing may be associated with a specific order-code suffix, but the exact suffix requirements must be checked in the Renesas ordering information.

Buscas relacionadas

ICS601R-25 datasheet ICS601R-25 pinout ICS601R-25 datasheet pdf ICS601R-25 equivalent ICS601R-25 replacement ICS601R-25 cross reference ICS601R-25 footprint ICS601R-25 price ICS601R-25 stock Renesas ICS601R-25 ICS601R-25 156MHz clock multiplier ICS601R-25 20-SSOP pinout ICS601R-25 vs ICS601R-25I

Componentes & termos relacionados

Renesas Electronics ICS601R-25 ICS601R-25I ICS601R-25T ICS601R-25ILFT ICS601R-25LF clock multiplier clock synthesizer frequency synthesizer phase-locked loop CMOS 1:5 multiplication ratio 156 MHz low phase noise low jitter low skew clock fanout 20-pin SSOP SSOP package family surface-mount package semiconductor integrated circuit clock and timing IC
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ