Renesas Electronics

ISL8394IB-T - Quad SPDT Analog Switch, 20-SOIC | Renesas

MPN: ISL8394IB-T ✗ Son Kullanım Zamanı
+2 V to +12 V Vdss 2.5 nA Id 17 ohm Rds(on) 20-pin SOIC Package
MOQ: 1 |

ISL8394IB-T Genel Bakış

Renesas ISL8394IB-T is a precision, quad SPDT analog switch with four independently controlled 2:1 switch circuits, 17 ohm typical on-resistance, 35 ohm maximum on-resistance, and a 20-pin SOIC package. It supports single-supply operation from +2 V to +12 V and dual-supply operation from ±2 V to ±6 V.

An analog switch is a semiconductor interface that routes signals between input and output terminals under digital control. The quad SPDT architecture places four independent single-pole, double-throw switches in one package, making the ISL8394IB-T suitable for signal-routing, sampling, test, measurement, and communication systems. Its wider supply range allows the same design to operate from low-voltage battery rails or split analog supplies.

Key electrical characteristics include 1 ohm maximum on-resistance matching between channels, 10 pC maximum charge injection, 5 microwatt power consumption, and 2.5 nA maximum leakage current at 85 degrees Celsius. The switching times are 50 ns maximum turn-on and 30 ns maximum turn-off, while guaranteed break-before-make operation helps prevent incorrect path overlap during transitions.

The device also provides 2000 V ESD protection using Method 3015.7 and is compatible with TTL and CMOS control signals. These characteristics make it especially useful when a system must switch low-level analog signals without introducing substantial resistance imbalance, charge disturbance, or excessive supply power. The manufacturer identifies the ISL8394 family as a drop-in replacement for the MAX394 family of four separately controlled SPDT switches.

Typical uses include battery-powered instrumentation, multimeter and test-equipment input routing, data-acquisition systems, sample-and-hold networks, and communication interfaces. In a dual-supply analog circuit, the negative supply allows bipolar signals to be switched without shifting their reference level. In single-supply systems, the device simplifies designs that require multiple routed signal paths under microcontroller or logic-controller control.

Designers should verify signal amplitude, control-logic levels, supply sequencing, and the maximum switched voltage before finalizing a board layout. Keep high-impedance traces short, provide a stable return path, and place the device so switching transients do not couple into sensitive analog nodes. Its low power consumption and low leakage are valuable in battery-operated equipment, although ESD protection and signal-path isolation remain essential in exposed applications.

This product page combines the ISL8394 family electrical characteristics, supply limits, package information, and switching specifications with application guidance, comparison parameters, and practical design notes. It also distinguishes verified drop-in options from generic cross-reference results, helping engineers evaluate PCB compatibility without confusing a similar part with a guaranteed pin-to-pin replacement.

Drop-in alternatifler için ISL8394IB-T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller ISL8394IB-T (aynı form faktörü ve ayağa oturma) — farklı olan Package, Product Type.

Renesas Electronics
Package: 16-pin SOIC
Product Type: Quad SPST analog switch
İle Karşılaştır ISL8394IB-T →

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

ISL8394IB-T Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Quad SPDT analog switch
Number of Switch Circuits 4 circuits
Switch Configuration 2:1 SPDT per circuit
On-Resistance, Typical 17 ohm
On-Resistance, Maximum 35 ohm
On-Resistance Matching Between Channels, Maximum 1 ohm
Single-Supply Voltage Range +2 V to +12 V
Dual-Supply Voltage Range +/-2 V to +/-6 V
Charge Injection, Maximum 10 pC
Power Consumption 5 microwatt
Leakage Current, Maximum at 85 degrees Celsius 2.5 nA
Turn-On Time, Maximum 50 ns
Turn-Off Time, Maximum 30 ns
ESD Protection 2000 V using Method 3015.7
Logic Compatibility TTL and CMOS compatible
Paket 20-pin SOIC
Montaj Türü Surface mount

ISL8394IB-T 20-pin soic Pin Yapısı Kılavuzu

ISL8394IB-T (20-pin soic paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

20-pin soic paket pin çizelgesi için ISL8394IB-T

Ayrıntılı pin çıkış verisi mevcut değil: ISL8394IB-T.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ISL8394IB-T için uygundur 6 uygulamas: Portable Multimeter Signal Routing, Data-Acquisition Sample-and-Hold Routing, Battery-Powered Sensor Interface, Communications Signal Multiplexing, Automated Test Equipment, Dual-Supply Audio and Control Routing.

🔧

Portable Multimeter Signal Routing

The ISL8394IB-T fits portable multimeter and measurement front ends that must route several analog inputs through a compact shared circuit. Its four independent SPDT paths provide flexible selection without requiring four separate relay positions, while the 17 ohm typical on-resistance limits signal-path loss. The 5 microwatt power consumption and 2.5 nA maximum leakage at 85 degrees Celsius are particularly useful in battery-operated instruments. Use the ±2 V to ±6 V dual-supply capability when the instrument must switch bipolar measurements around ground; otherwise, a +2 V to +12 V single rail can simplify the power architecture.

📊

Data-Acquisition Sample-and-Hold Routing

The ISL8394IB-T can route multiple sensor or conditioned input lines into a data-acquisition front end while keeping control logic separated from the analog paths. Its 50 ns maximum turn-on time and 30 ns maximum turn-off time support rapid switching, and guaranteed break-before-make operation reduces the risk of briefly connecting conflicting sources. The 1 ohm maximum on-resistance matching between channels helps preserve balance across inputs. Designers should evaluate the 10 pC maximum charge injection against the acquisition front end’s noise and settling requirements, particularly when sampling high-impedance sources.

🧩

Battery-Powered Sensor Interface

The ISL8394IB-T is appropriate for battery-powered sensor interfaces that switch several low-frequency analog channels before conversion or signal conditioning. Its low 5 microwatt power consumption reduces standby burden, while maximum leakage of 2.5 nA at 85 degrees Celsius helps preserve the integrity of high-impedance sensor nodes. The +2 V minimum single-supply operation supports low-voltage portable systems, and the ±6 V maximum dual-rail setting accommodates bipolar sensor outputs. Keep switched-node traces short and use guarding where leakage or capacitive coupling could influence the source impedance.

🌐

Communications Signal Multiplexing

The ISL8394IB-T can multiplex transmit, receive, test, or bypass paths in communication equipment that requires four independently controlled analog routes. Fast turn-on and turn-off characteristics support controlled path changes, and the maximum on-resistance matching of 1 ohm helps maintain channel balance in differential or impedance-sensitive systems. Dual-supply operation from ±2 V to ±6 V supports bipolar routing around ground. For high-frequency designs, verify the complete frequency-response, capacitance, and isolation characteristics rather than relying only on the 50 ns and 30 ns timing limits.

🖥️

Automated Test Equipment

The ISL8394IB-T is suitable for automated test equipment that distributes test signals among multiple circuit nodes using four SPDT paths. The TTL- and CMOS-compatible control interface allows connection to common digital controllers, while the low power consumption supports compact instrument designs. Maximum leakage of 2.5 nA at 85 degrees Celsius is advantageous when the equipment measures high-impedance DUT nodes. The 2000 V ESD protection rating improves robustness around externally accessible test fixtures, although the selected switched voltage and signal current must remain within the device’s operating conditions.

🎧

Dual-Supply Audio and Control Routing

The ISL8394IB-T can route bipolar audio or control signals in dual-supply analog systems using its four independent SPDT channels. The ±2 V to ±6 V operating range permits symmetrical signal handling around ground, while 17 ohm typical on-resistance provides a practical compromise between channel matching and low-power operation. The guaranteed break-before-make behavior helps prevent source contention during switching. For precision audio paths, assess charge injection, off-state isolation, and board-level coupling in addition to the timing specifications, because switching transients can still affect sensitive downstream nodes.

Önerilen Ürünler Özeti

ISL8394IB-T Renesas Electronics Kullanıldığı Yer: Portable Multimeter Signal Routing, Data-Acquisition Sample-and-Hold Routing, Battery-Powered Sensor Interface, Communications Signal Multiplexing, Automated Test Equipment, Dual-Supply Audio and Control Routing MAX394 MAX394-family implementation replaced by ISL8394 Kullanıldığı Yer: Portable Multimeter Signal Routing, Data-Acquisition Sample-and-Hold Routing, Battery-Powered Sensor Interface, Communications Signal Multiplexing, Automated Test Equipment, Dual-Supply Audio and Control Routing
What is the operating voltage range of ISL8394IB-T?
The ISL8394IB-T operates from +2 V to +12 V in single-supply mode or from ±2 V to ±6 V in dual-supply mode. According to the Intersil ISL8394 manufacturer datasheet, the dual-supply configuration supports bipolar signal routing, while the single-supply configuration is suited to battery-powered and low-voltage systems. The selected rails must remain within the stated limits during startup, normal operation, and signal switching.
What are the key specifications of ISL8394IB-T that engineers should know?
The ISL8394IB-T is a 20-pin SOIC quad SPDT analog switch with 17 ohm typical and 35 ohm maximum on-resistance. The manufacturer datasheet also specifies 1 ohm maximum channel matching, 10 pC maximum charge injection, 5 microwatt power consumption, 2.5 nA maximum leakage at 85 degrees Celsius, 50 ns maximum turn-on time, and 30 ns maximum turn-off time. It supports +2 V to +12 V single supply or ±2 V to ±6 V dual supply.
Is ISL8394IB-T suitable for battery-powered test equipment?
Yes, the ISL8394IB-T is suitable for battery-powered test equipment because its power consumption is specified at 5 microwatt and leakage current is limited to 2.5 nA maximum at 85 degrees Celsius. The low-power behavior is especially useful in portable instruments that repeatedly route measured signals through multiple analog paths. Its +2 V single-supply minimum also supports low-energy systems, although the switched signal amplitude must remain compatible with the selected supply range.
What is the difference between ISL8394IB and ISL8394IB-T?
ISL8394IB and ISL8394IB-T identify the same ISL8394 quad SPDT analog-switch device, while the added -T suffix identifies the ordering or packaging format associated with the tape-and-reel presentation. The manufacturer product listing identifies ISL8394IB-T as a 20-pin SOIC device with the same electrical function as ISL8394IB. Because the suffix concerns orderable packaging rather than a different switch architecture, existing ISL8394IB circuit designs can generally use ISL8394IB-T when its package form matches the PCB assembly requirements.
Can MAX394 replace ISL8394IB-T?
The Renesas product page identifies the ISL8394 family as a drop-in replacement for the MAX394 family of four separately controlled SPDT switches. This relationship indicates that ISL8394IB-T was designed as a direct replacement for the corresponding MAX394 implementation. A production substitution should still be checked against the exact MAX394 suffix, package drawing, control truth table, absolute maximum ratings, and the power rail conditions used in the original design.
What is the best drop-in replacement for ISL8394IB-T?
No distinct, verified drop-in replacement for ISL8394IB-T was identified beyond orderable forms of the same ISL8394 device and the manufacturer-documented MAX394 replacement relationship. ISL8394IB is the closest same-device ordering option, while MAX394 is the cross-reference supported by the Renesas product page. For a new or shortage-driven substitution, compare the exact suffix, 20-pin SOIC footprint, supply range, on-resistance, control logic, switching timing, and ESD rating before approving a change.
What can replace ISL8394IB-T?
ISL8394IB is the direct same-family ordering alternative for ISL8394IB-T when the required package presentation is acceptable. The ISL8394 family also serves as the drop-in replacement for MAX394, as stated by Renesas. Other candidate analog switches should not be treated as drop-in parts unless their exact package, pin assignment, control truth table, supply limits, and switching characteristics have been verified against the ISL8394IB-T footprint.
Is ISL8394IB-T the same as MAX394?
The ISL8394IB-T is not merely a functional analogue to MAX394; Renesas describes the ISL8394 family as a drop-in replacement for MAX394. Both provide four separately controlled SPDT switches, but engineers should verify the exact package suffix and operating limits for the particular MAX394 device previously installed. The key replacement checks are pin compatibility, control polarity, supply range, on-resistance, leakage, charge injection, and switching speed.
Where to download the ISL8394IB-T datasheet PDF?
The ISL8394IB-T datasheet PDF can be obtained through the official Renesas ISL8394 product page or the linked Intersil manufacturer datasheet. The document is titled “Low-Voltage, Single and Dual Supply, Quad SPDT, Analog Switches” and describes the ISL8394 family’s electrical characteristics, supply configurations, switching behavior, and applications. Use the pin-description table and absolute-maximum-rating section for final PCB and operating-limit verification.
Where can I find the ISL8394IB-T pinout?
The ISL8394IB-T pinout is documented in the pin-description table and package drawing within the Intersil ISL8394 manufacturer datasheet. The verified product listings identify the device as a 20-pin SOIC, and the package diagram is keyed as SOIC-20 on this page. Because individual terminal numbers are not reproduced in the product metadata, use the manufacturer pin table directly when assigning control inputs, supply rails, grounds, and switched terminals.
How much does ISL8394IB-T cost?
The current unit price for ISL8394IB-T should be requested through the Request a Quote form on this page rather than copied from a listing whose price or quantity schedule may change. The same form is the appropriate route for checking stock, minimum order quantity, lead time, and volume breaks for the required -T ordering suffix. This approach avoids selecting a price that corresponds to a different package suffix or obsolete ordering code.
What is the lead time for ISL8394IB-T?
The current lead time for ISL8394IB-T should be confirmed through the Request a Quote form on this page using the exact ISL8394IB-T suffix and required delivery quantity. Renesas describes support for the ISL8394 as limited to customers that have already adopted the product, so lifecycle planning should include the manufacturer’s support response as well as the requested production schedule. The form allows the purchasing team to obtain a binding schedule for the intended order.
Is ISL8394IB-T in stock?
Use the Request a Quote form on this page to check current ISL8394IB-T stock and its allocation for your required quantity. Availability can vary by exact package suffix, regional inventory, and production status, so a listing that merely shows the device as orderable does not guarantee a specific quantity is immediately available. Provide the target quantity and delivery date so the quote reflects the appropriate schedule.
When should I choose ISL8394IB-T instead of MAX394?
Choose ISL8394IB-T when the design uses the ISL8394 supply and switching characteristics or when a documented replacement for MAX394 is needed. Renesas specifically identifies ISL8394 as a drop-in replacement for MAX394, while the ISL8394 datasheet provides a +2 V to +12 V single-supply or ±2 V to ±6 V dual-supply operating framework. For an existing MAX394 board, verify the exact suffix and pin drawing; for a new low-leakage design, the 2.5 nA maximum leakage and 5 microwatt power consumption may be decisive.
What is the best Renesas equivalent for ISL8394IB-T?
ISL8394IB is the closest verified Renesas ordering equivalent because it represents the same quad SPDT analog-switch device without the -T suffix. The suffix difference primarily determines the orderable packaging format rather than the electrical function. If the exact -T tape-and-reel format is required, specify ISL8394IB-T directly; if lifecycle support is the priority, obtain a current quotation and lifecycle confirmation through the Request a Quote form before changing the BOM.

Mühendislik referans verileri: ISL8394IB-T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose ISL8394IB-T for low-voltage or dual-supply analog routing that requires four independently controlled SPDT paths, low leakage, fast switching, and guaranteed break-before-make operation. The +2 V to +12 V single-supply range suits portable systems, while ±2 V to ±6 V dual supply accommodates bipolar signals without shifting the signal around ground. ISL8394IB is the closest same-family ordering option when its package form matches the assembly, but ISL8394IB-T should be retained when the specified -T format is required. Renesas identifies the ISL8394 family as a drop-in replacement for MAX394, making it appropriate for repairs and redesigns based on that family after checking the exact suffix and footprint. Because no other distinct drop-in candidate was confirmed against the exact ISL8394IB-T ordering code, do not substitute a generic quad SPDT switch without verifying pin mapping, control polarity, common-terminal behavior, supply limits, charge injection, leakage, and switching timing.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Brand Renesas Electronics
Package 20-pin SOIC
Product Type Quad SPDT analog switch
Number of Circuits 4 circuits
Single-Supply Voltage Range +2 V to +12 V
Dual-Supply Voltage Range +/-2 V to +/-6 V
On-Resistance 17 ohm typical, 35 ohm maximum
Charge Injection 10 pC maximum
Leakage Current 2.5 nA maximum at 85 degrees Celsius
Switching Time 50 ns maximum turn-on, 30 ns maximum turn-off

Ana Farklılayıcılar

  • Single package contains four independently controlled SPDT paths (karşılaştırma:MAX394)
  • Wide single- and dual-supply operating envelope (karşılaştırma:MAX394)
  • Low-power operation for portable and high-impedance systems (karşılaştırma:MAX394)

Tasarım Notları

Route the four switched paths as compact analog traces and connect the control inputs to a separate digital region. Place the IC near the source and destination nodes so high-impedance sections remain short, and provide a continuous ground reference beneath and around the analog routing area. This reduces capacitive pickup from control signals and prevents switching transients from coupling directly into sensitive measurement inputs.

Treat the 10 pC maximum charge injection and 35 ohm maximum on-resistance as important limits in high-impedance designs. A charge pulse produces an instantaneous voltage error proportional to switched-node capacitance and source impedance, so place the switch where the affected node is not directly measured. If the application requires very low injected error, include a dedicated buffer after the switching node and evaluate the complete settling behavior of that buffer.

Decouple each supply rail close to the device and verify operation across the full intended supply range. Use a short ground return for bypass capacitors rather than routing the return through a distant analog plane. In dual-supply systems, confirm that both positive and negative rails remain within ±2 V to ±6 V and that control inputs never exceed the permitted logic levels. Decoupling requirements and stability details should be taken from the manufacturer datasheet and reference guidance.

Do not assume that a generic quad SPDT switch is a drop-in replacement. Confirm the 20-pin SOIC footprint, pin numbering, control truth table, common terminals, supply pins, and break-before-make behavior. The ISL8394IB-T and ISL8394IB ordering codes represent package-form choices within the same family, while the MAX394 relationship is explicitly identified by Renesas. Validate any new substitution against absolute maximum ratings and the actual switched signal conditions.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The verified product information identifies TTL and CMOS compatibility, a 20-pin SOIC package, and 2000 V ESD protection using Method 3015.7. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was established for the exact ordering code.

Veri doğrulanma tarihi: 2026-11-10 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

ISL8394IB-T datasheet ISL8394IB-T datasheet pdf ISL8394IB-T pinout ISL8394IB-T equivalent ISL8394IB-T replacement ISL8394IB-T drop-in replacement ISL8394IB-T vs MAX394 Renesas ISL8394IB-T ISL8394IB-T 20-SOIC ISL8394IB-T 17 ohm 35 ohm ISL8394IB-T price ISL8394IB-T stock

İlgili Bileşenler ve Terimler

Renesas Electronics Intersil ISL8394IB-T ISL8394IB MAX394 quad SPDT analog switch analog switch switch multiplexer interface IC semiconductor single-pole double-throw break-before-make on-resistance charge injection leakage current power consumption turn-on time turn-off time TTL CMOS ESD protection 20-pin SOIC surface mount Method 3015.7
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle