ISL8394IB-T - Quad SPDT Analog Switch, 20-SOIC | Renesas
MPN: ISL8394IB-T ✗ اختتامِ زندگیISL8394IB-T جائزہ
An analog switch is a semiconductor interface that routes signals between input and output terminals under digital control. The quad SPDT architecture places four independent single-pole, double-throw switches in one package, making the ISL8394IB-T suitable for signal-routing, sampling, test, measurement, and communication systems. Its wider supply range allows the same design to operate from low-voltage battery rails or split analog supplies.
Key electrical characteristics include 1 ohm maximum on-resistance matching between channels, 10 pC maximum charge injection, 5 microwatt power consumption, and 2.5 nA maximum leakage current at 85 degrees Celsius. The switching times are 50 ns maximum turn-on and 30 ns maximum turn-off, while guaranteed break-before-make operation helps prevent incorrect path overlap during transitions.
The device also provides 2000 V ESD protection using Method 3015.7 and is compatible with TTL and CMOS control signals. These characteristics make it especially useful when a system must switch low-level analog signals without introducing substantial resistance imbalance, charge disturbance, or excessive supply power. The manufacturer identifies the ISL8394 family as a drop-in replacement for the MAX394 family of four separately controlled SPDT switches.
Typical uses include battery-powered instrumentation, multimeter and test-equipment input routing, data-acquisition systems, sample-and-hold networks, and communication interfaces. In a dual-supply analog circuit, the negative supply allows bipolar signals to be switched without shifting their reference level. In single-supply systems, the device simplifies designs that require multiple routed signal paths under microcontroller or logic-controller control.
Designers should verify signal amplitude, control-logic levels, supply sequencing, and the maximum switched voltage before finalizing a board layout. Keep high-impedance traces short, provide a stable return path, and place the device so switching transients do not couple into sensitive analog nodes. Its low power consumption and low leakage are valuable in battery-operated equipment, although ESD protection and signal-path isolation remain essential in exposed applications.
This product page combines the ISL8394 family electrical characteristics, supply limits, package information, and switching specifications with application guidance, comparison parameters, and practical design notes. It also distinguishes verified drop-in options from generic cross-reference results, helping engineers evaluate PCB compatibility without confusing a similar part with a guaranteed pin-to-pin replacement.
کے لیے ڈراپ اِن متبادل ISL8394IB-T — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ISL8394IB-T (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Product Type.
اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔
متبادل کی درخواست کریںISL8394IB-T زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | Quad SPDT analog switch |
| Number of Switch Circuits | 4 circuits |
| Switch Configuration | 2:1 SPDT per circuit |
| On-Resistance, Typical | 17 ohm |
| On-Resistance, Maximum | 35 ohm |
| On-Resistance Matching Between Channels, Maximum | 1 ohm |
| Single-Supply Voltage Range | +2 V to +12 V |
| Dual-Supply Voltage Range | +/-2 V to +/-6 V |
| Charge Injection, Maximum | 10 pC |
| Power Consumption | 5 microwatt |
| Leakage Current, Maximum at 85 degrees Celsius | 2.5 nA |
| Turn-On Time, Maximum | 50 ns |
| Turn-Off Time, Maximum | 30 ns |
| ESD Protection | 2000 V using Method 3015.7 |
| Logic Compatibility | TTL and CMOS compatible |
| پیکیج | 20-pin SOIC |
| ماؤنٹنگ ٹائپ | Surface mount |
ISL8394IB-T 20-pin soic پن کنفیگریشن گائیڈ
ISL8394IB-T (20-pin soic پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ISL8394IB-T.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ISL8394IB-T کے لیے موزوں ہے 6 ایپلیکیشنs: Portable Multimeter Signal Routing, Data-Acquisition Sample-and-Hold Routing, Battery-Powered Sensor Interface, Communications Signal Multiplexing, Automated Test Equipment, Dual-Supply Audio and Control Routing.
Portable Multimeter Signal Routing
The ISL8394IB-T fits portable multimeter and measurement front ends that must route several analog inputs through a compact shared circuit. Its four independent SPDT paths provide flexible selection without requiring four separate relay positions, while the 17 ohm typical on-resistance limits signal-path loss. The 5 microwatt power consumption and 2.5 nA maximum leakage at 85 degrees Celsius are particularly useful in battery-operated instruments. Use the ±2 V to ±6 V dual-supply capability when the instrument must switch bipolar measurements around ground; otherwise, a +2 V to +12 V single rail can simplify the power architecture.
تجویز کردہ
Data-Acquisition Sample-and-Hold Routing
The ISL8394IB-T can route multiple sensor or conditioned input lines into a data-acquisition front end while keeping control logic separated from the analog paths. Its 50 ns maximum turn-on time and 30 ns maximum turn-off time support rapid switching, and guaranteed break-before-make operation reduces the risk of briefly connecting conflicting sources. The 1 ohm maximum on-resistance matching between channels helps preserve balance across inputs. Designers should evaluate the 10 pC maximum charge injection against the acquisition front end’s noise and settling requirements, particularly when sampling high-impedance sources.
تجویز کردہ
Battery-Powered Sensor Interface
The ISL8394IB-T is appropriate for battery-powered sensor interfaces that switch several low-frequency analog channels before conversion or signal conditioning. Its low 5 microwatt power consumption reduces standby burden, while maximum leakage of 2.5 nA at 85 degrees Celsius helps preserve the integrity of high-impedance sensor nodes. The +2 V minimum single-supply operation supports low-voltage portable systems, and the ±6 V maximum dual-rail setting accommodates bipolar sensor outputs. Keep switched-node traces short and use guarding where leakage or capacitive coupling could influence the source impedance.
تجویز کردہ
Communications Signal Multiplexing
The ISL8394IB-T can multiplex transmit, receive, test, or bypass paths in communication equipment that requires four independently controlled analog routes. Fast turn-on and turn-off characteristics support controlled path changes, and the maximum on-resistance matching of 1 ohm helps maintain channel balance in differential or impedance-sensitive systems. Dual-supply operation from ±2 V to ±6 V supports bipolar routing around ground. For high-frequency designs, verify the complete frequency-response, capacitance, and isolation characteristics rather than relying only on the 50 ns and 30 ns timing limits.
تجویز کردہ
Automated Test Equipment
The ISL8394IB-T is suitable for automated test equipment that distributes test signals among multiple circuit nodes using four SPDT paths. The TTL- and CMOS-compatible control interface allows connection to common digital controllers, while the low power consumption supports compact instrument designs. Maximum leakage of 2.5 nA at 85 degrees Celsius is advantageous when the equipment measures high-impedance DUT nodes. The 2000 V ESD protection rating improves robustness around externally accessible test fixtures, although the selected switched voltage and signal current must remain within the device’s operating conditions.
تجویز کردہ
Dual-Supply Audio and Control Routing
The ISL8394IB-T can route bipolar audio or control signals in dual-supply analog systems using its four independent SPDT channels. The ±2 V to ±6 V operating range permits symmetrical signal handling around ground, while 17 ohm typical on-resistance provides a practical compromise between channel matching and low-power operation. The guaranteed break-before-make behavior helps prevent source contention during switching. For precision audio paths, assess charge injection, off-state isolation, and board-level coupling in addition to the timing specifications, because switching transients can still affect sensitive downstream nodes.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ISL8394IB-T — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Brand | Renesas Electronics |
| Package | 20-pin SOIC |
| Product Type | Quad SPDT analog switch |
| Number of Circuits | 4 circuits |
| Single-Supply Voltage Range | +2 V to +12 V |
| Dual-Supply Voltage Range | +/-2 V to +/-6 V |
| On-Resistance | 17 ohm typical, 35 ohm maximum |
| Charge Injection | 10 pC maximum |
| Leakage Current | 2.5 nA maximum at 85 degrees Celsius |
| Switching Time | 50 ns maximum turn-on, 30 ns maximum turn-off |
اہم امتیازی خصوصیات
- Single package contains four independently controlled SPDT paths (بمقابلہMAX394)
- Wide single- and dual-supply operating envelope (بمقابلہMAX394)
- Low-power operation for portable and high-impedance systems (بمقابلہMAX394)
ڈیزائن نوٹس
Route the four switched paths as compact analog traces and connect the control inputs to a separate digital region. Place the IC near the source and destination nodes so high-impedance sections remain short, and provide a continuous ground reference beneath and around the analog routing area. This reduces capacitive pickup from control signals and prevents switching transients from coupling directly into sensitive measurement inputs.
Treat the 10 pC maximum charge injection and 35 ohm maximum on-resistance as important limits in high-impedance designs. A charge pulse produces an instantaneous voltage error proportional to switched-node capacitance and source impedance, so place the switch where the affected node is not directly measured. If the application requires very low injected error, include a dedicated buffer after the switching node and evaluate the complete settling behavior of that buffer.
Decouple each supply rail close to the device and verify operation across the full intended supply range. Use a short ground return for bypass capacitors rather than routing the return through a distant analog plane. In dual-supply systems, confirm that both positive and negative rails remain within ±2 V to ±6 V and that control inputs never exceed the permitted logic levels. Decoupling requirements and stability details should be taken from the manufacturer datasheet and reference guidance.
Do not assume that a generic quad SPDT switch is a drop-in replacement. Confirm the 20-pin SOIC footprint, pin numbering, control truth table, common terminals, supply pins, and break-before-make behavior. The ISL8394IB-T and ISL8394IB ordering codes represent package-form choices within the same family, while the MAX394 relationship is explicitly identified by Renesas. Validate any new substitution against absolute maximum ratings and the actual switched signal conditions.
تعمیل کی معلومات
The verified product information identifies TTL and CMOS compatibility, a 20-pin SOIC package, and 2000 V ESD protection using Method 3015.7. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was established for the exact ordering code.