Microchip Technology

KSZ8051MLL-TR - 100M Ethernet PHY with MII | Microchip

MPN: KSZ8051MLL-TR ✗ Son Kullanım Zamanı
3.3 V Vdss 48-LQFP (7 mm x 7 mm) Package
MOQ: 1 |

KSZ8051MLL-TR Genel Bakış

The Microchip Technology KSZ8051MLL-TR is a single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver with full Media Independent Interface support, supplied in a 48-lead LQFP package measuring 7 mm by 7 mm. It operates from a 3.3 V supply and is designed for automotive Ethernet applications qualified to AEC-Q100 standards. The integrated PHY provides a physical interface between a 10/100 Ethernet MAC and a CAT-5 or better unshielded twisted-pair network.

An Ethernet physical-layer transceiver, or Ethernet PHY, is the circuit that converts digital Ethernet data into signals suitable for transmission over twisted-pair cabling and converts received analog signals back into digital data for the MAC. The KSZ8051 belongs to the interface-IC hierarchy: Ethernet PHY → Ethernet transceiver → physical-layer transceiver → semiconductor. Its MII interface connects directly to an Ethernet MAC while the analog PHY side connects to an RJ45 magnetics or network connector section.

Key features include support for both 10 Mb/s and 100 Mb/s Ethernet rates, full MII support, single-supply 3.3 V operation, and AEC-Q100 qualification. The 48-LQFP surface-mount package provides a defined lead arrangement and exposed routing space for power, ground, data, control, and analog network connections. These characteristics make the device suitable for automotive Ethernet nodes, industrial control equipment, embedded gateways, and industrial network switches.

The KSZ8051 is a highly integrated PHY solution intended to reduce board cost and simplify PCB layout. A 3.3 V-only system architecture eliminates the need for a separate 5 V transceiver rail. The full MII interface provides a conventional parallel connection to an Ethernet controller, allowing the PHY to support legacy 10/100 Ethernet designs without introducing a proprietary serial interface.

Typical applications include 100BASE-TX vehicle-network gateways, industrial Ethernet controllers, embedded communication modules, network-interface adapters, and factory automation equipment. Automotive deployments benefit from the manufacturer’s AEC-Q100 qualification, while industrial designs can use the same PHY for equipment operating near 10BASE-T or 100BASE-TX networks.

The principal design task is preserving signal integrity from the PHY through the magnetics and connector while providing a low-impedance 3.3 V plane across the LQFP leads. Place input and output decoupling capacitors close to their associated power pins, route the MII clock and data signals as matched-length groups, and maintain continuous ground-plane return paths beneath and between the PHY and network-interface circuitry.

This page combines the manufacturer’s device classification, package information, automotive qualification status, sourcing lifecycle information, and practical PCB guidance with clearly qualified drop-in replacement analysis. It distinguishes electrically and mechanically interchangeable options from related Ethernet PHYs that require redesign.

Drop-in alternatifler için KSZ8051MLL-TR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

KSZ8051MLLI-TR

✅ Yerleştirme
📦 48-LQFP (7 mm x 7 mm)
Temperature-grade ordering suffix differs; electrical family, full MII interface, 3.3 V supply, and 10/100 Mb/s operation remain aligned

📋 Katalogda Olmayan Referans Alternatifi

KSZ8051MLL-TR Özellikler

Product Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Besleme Gerilimi 3.3 V
Supported Ethernet Rates 10 Mb/s and 100 Mb/s
MAC Interface Full MII
Transceiver Count 1 transceiver
Paket 48-LQFP (7 mm x 7 mm)
Montaj Türü Surface mount
Automotive Qualification AEC-Q100 standard qualified
Cable Support CAT-5 unshielded twisted pair
Supply Type Single supply
Maximum Data Rate 100 Mb/s

KSZ8051MLL-TR 48-lqfp (7 mm x 7 mm) Pin Yapısı Kılavuzu

KSZ8051MLL-TR (48-lqfp (7 mm x 7 mm) paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

48-lqfp (7 mm x 7 mm) paket pin çizelgesi için KSZ8051MLL-TR

Ayrıntılı pin çıkış verisi mevcut değil: KSZ8051MLL-TR.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

KSZ8051MLL-TR için uygundur 6 uygulamas: Automotive Ethernet Gateway, Industrial Ethernet Controller, Embedded Network Interface Adapter, Factory Automation Sensor Gateway, Network Management Interface, Legacy Test and Measurement Ethernet Port.

🚗

Automotive Ethernet Gateway

The KSZ8051MLL-TR fits an automotive Ethernet gateway because it combines a 3.3 V single supply, 10BASE-T/100BASE-TX operation, full MII support, and AEC-Q100 standard qualification in one 48-LQFP device. It can sit between a legacy parallel-interface Ethernet controller and the vehicle’s twisted-pair network. Keeping the PHY interface at 100 Mb/s makes it appropriate for lower-bandwidth vehicle domains, diagnostics, or service connections where full-speed Ethernet is unnecessary. The 7 mm by 7 mm package supports compact controller boards, although the external magnetics and connector can dominate board area. Confirm temperature range, transient requirements, and qualification details for the specific vehicle platform before release.

🏭

Industrial Ethernet Controller

The KSZ8051MLL-TR is suitable for an industrial 10/100 Ethernet controller that uses a conventional MII interface and runs from 3.3 V. The PHY provides the physical-layer connection to CAT-5 unshielded twisted-pair cabling while the host processor or dedicated MAC handles higher-layer traffic. A single 3.3 V rail simplifies power sequencing in control cabinets where space and component count are constrained. The principal design consideration is signal integrity between the 48-LQFP device, network magnetics, and connector; keep the analog network section away from noisy switching nodes and provide local supply decoupling. Industrial temperature, isolation, and EMC requirements must be checked against the complete system specification.

🧩

Embedded Network Interface Adapter

The KSZ8051MLL-TR can serve as the 10/100 Ethernet physical layer in an embedded network-interface adapter driven by an MII-capable controller. Its single 3.3 V operation avoids a separate 5 V transceiver rail, while the full MII interface gives the controller access to conventional transmit, receive, carrier-sense, and collision-related signaling. At the network side, the PHY interfaces with magnetics and an RJ45 section to form a complete twisted-pair connection. Designers should reserve continuous ground area, minimize the supply loop, and verify MII timing against the MAC clock. Its 100 Mb/s ceiling makes it appropriate for management, control, telemetry, and legacy embedded networks rather than bandwidth-heavy multimedia transfer.

🏭

Factory Automation Sensor Gateway

The KSZ8051MLL-TR can connect a factory sensor or PLC gateway to a 10BASE-T or 100BASE-TX network when the host controller retains an MII interface. Supporting both rates allows the same PHY architecture to communicate with older 10 Mb/s equipment and faster 100 Mb/s infrastructure. The 3.3 V single-supply characteristic is useful for compact control boards with constrained power budgets, and the 48-LQFP footprint permits compact placement beside the processor. For reliable operation, isolate Ethernet routing from motor-control and relay-switching nodes, use a solid ground plane, and place bypass capacitors at the supply pins. Environmental immunity and sustained operating temperature should be validated for the machine’s installed location.

🌐

Network Management Interface

The KSZ8051MLL-TR is a practical choice for a dedicated network-management interface that requires legacy 10/100 Ethernet rather than gigabit throughput. A management processor with an MII controller can use the PHY to connect to switches, routers, or industrial infrastructure without implementing a complex multi-gigabit PHY interface. Operation from one 3.3 V rail simplifies auxiliary low-power circuitry, while full MII support gives the controller direct access to standard Ethernet framing and status signals. The 48-LQFP package keeps the PHY compact but requires disciplined pin assignment and layout. Verify the controller’s supported MII clock mode and timing, and check the complete interface’s EMC performance when it will be exposed through an external cable and connector.

🖥️

Legacy Test and Measurement Ethernet Port

The KSZ8051MLL-TR can provide a 10/100 network connection for legacy test and measurement equipment whose controller supports the MII interface. This is especially relevant when retaining an established measurement instrument platform while updating its communications subsystem rather than replacing the entire processor architecture. The PHY supports 10 and 100 Mb/s operation from 3.3 V, allowing connection to laboratory computers and common Ethernet infrastructure. Because measurement systems can combine sensitive analog circuitry with switching converters, the Ethernet section should have a controlled ground reference and separated return paths. Confirm signal-integrity margins, isolation requirements, and the applicable environmental range before integrating the 48-LQFP device into a new enclosure.

What is the KSZ8051MLL-TR?
The KSZ8051MLL-TR is a single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver from Microchip Technology. It provides a full MII interface, operates from 3.3 V, and is packaged in a 48-LQFP measuring 7 mm by 7 mm. According to the Microchip Technology product page, the device is AEC-Q100 standard qualified for automotive applications and is intended to simplify board cost and layout.
What is the operating voltage of KSZ8051MLL-TR?
The KSZ8051MLL-TR operates from a 3.3 V single supply. This single-rail architecture simplifies automotive and industrial Ethernet circuitry by eliminating the need for a separate 5 V PHY supply. According to the Microchip Technology product page, the KSZ8051 is a highly integrated 10BASE-T/100BASE-TX solution. Exact minimum and maximum supply-voltage limits should be confirmed in the manufacturer datasheet before finalizing the power tree.
Which Ethernet speeds does KSZ8051MLL-TR support?
The KSZ8051MLL-TR supports 10 Mb/s and 100 Mb/s Ethernet operation through its 10BASE-T/100BASE-TX physical layer. Its maximum supported data rate is 100 Mb/s. According to the Microchip Technology product-page description, the PHY is intended for standard twisted-pair networks and includes a full MII connection to an Ethernet MAC, making it suitable for controllers designed around the traditional parallel Ethernet interface.
Where can I download the KSZ8051MLL-TR datasheet?
The KSZ8051MLL-TR datasheet can be obtained through the Microchip Technology KSZ8051 product page at https://www.microchip.com/en-us/product/KSZ8051. That page provides the manufacturer’s device information and access to supporting documentation. When designing the board, also use the manufacturer pin-description table and typical application circuit to assign all 48 LQFP leads correctly.
Where is the KSZ8051MLL-TR pinout?
The KSZ8051MLL-TR pinout is documented in the manufacturer’s KSZ8051 datasheet and package documentation for the 48-LQFP, 7 mm by 7 mm package. Use the pin-description table when assigning power, ground, MII, clock, and analog-network connections. The exact lead names and alternate-function details are not reproduced on this page because they must be transcribed directly from the manufacturer pinout to avoid routing errors.
Is the KSZ8051MLL-TR suitable for automotive Ethernet?
The KSZ8051MLL-TR is suitable for automotive Ethernet designs because the KSZ8051 family is described by Microchip Technology as AEC-Q100 standard qualified. It combines 3.3 V operation, 10/100 Mb/s Ethernet support, and a 48-LQFP package in one physical-layer device. Automotive qualification of the family does not, by itself, qualify the complete vehicle network, so system-level EMC, environmental, and functional-safety validation remains necessary.
What can replace the KSZ8051MLL-TR?
The closest identified replacement is the KSZ8051MLLI-TR, provided its temperature-grade suffix and ordering code meet the production requirements. Both use the 48-LQFP package and the same MII-based 10/100 Ethernet PHY architecture. The KSZ8051MLL without the tape-and-reel ordering suffix is electrically equivalent but differs in delivery format. Verify the exact MPN, temperature grade, lifecycle status, and PCB footprint before substitution.
Is KSZ8051MLL-TR the same as KSZ8051MLL?
The KSZ8051MLL-TR and KSZ8051MLL represent the same electrical device in different ordering formats, with “-TR” denoting the tape-and-reel shipment option. The published device description identifies both as a 1/1 10BASE-T/100BASE-TX transceiver with full MII support in a 48-LQFP package. The distinction is operational and commercial rather than a change to the Ethernet interface or PCB land pattern.
What is the best Microchip alternative to KSZ8051MLL-TR?
The best identified same-manufacturer alternative is the KSZ8051MLLI-TR, subject to confirming its exact temperature grade and qualification requirements. It retains the KSZ8051 family’s 3.3 V operation, full MII interface, 10BASE-T/100BASE-TX support, and 48-LQFP format. Related KSZ8041 and KSZ8081 devices may serve similar networking functions, but they should not be treated as drop-in replacements without a complete pin-by-pin and signal-timing review.
When should I choose KSZ8051MLL-TR over a newer Ethernet PHY?
Choose the KSZ8051MLL-TR when maintaining an existing 3.3 V, full-MII 10/100 Ethernet design that uses its 48-LQFP footprint and when an AEC-Q100-qualified legacy PHY is acceptable. For new systems requiring gigabit data rates, reduced pin count, integrated magnetics support, or newer diagnostic features, evaluate a current PHY instead. The decisive factors are MAC compatibility, thermal design, automotive qualification, and long-term availability.
Can KSZ8051MLL-TR replace KSZ8041MLL-TR?
The KSZ8051MLL-TR should not be assumed to be a direct drop-in replacement for the KSZ8041MLL-TR. Although both are Microchip 10/100 Ethernet PHY families and related listings may use a 48-LQFP format, shared package dimensions do not prove identical pinout, MII timing, clock requirements, or strap behavior. Use the manufacturer comparison and pin tables before considering a board-level substitution; a PCB redesign may be required.
KSZ8051MLL-TR vs KSZ8081MLXCA-TR: which is better for an MII controller?
The KSZ8051MLL-TR is the safer selection for a design explicitly built around a full-MII, 3.3 V, 48-LQFP PHY. The KSZ8081MLXCA-TR belongs to a related 10/100 Ethernet product line, but shared Ethernet functionality and package count do not establish pin compatibility. The KSZ8051MLL-TR also has documented AEC-Q100 qualification for automotive use. Confirm every MII signal, strap, power pin, and timing requirement before replacing the original device.
How much board area does the KSZ8051MLL-TR require?
The KSZ8051MLL-TR uses a 48-LQFP package measuring 7 mm by 7 mm. Its land pattern must be routed according to the manufacturer package drawing, including lead pitch, body clearance, and exposed or no-exposed-pad construction specified for the exact ordering code. In practice, the PHY footprint is smaller than a typical RJ45 connector and network magnetics but needs careful ground-plane and analog-signal routing.
What PCB layout practices are important for KSZ8051MLL-TR?
The KSZ8051MLL-TR layout should use a continuous ground plane, short 3.3 V supply paths, and decoupling capacitors placed close to the relevant power leads. Keep the MII clock and data routing orderly, avoid routing high-current digital returns through the analog network area, and maintain controlled return paths between the PHY and magnetics. These practices reduce supply-noise coupling, clock jitter, and susceptibility to common-mode Ethernet disturbances.
Where can I buy KSZ8051MLL-TR and check its availability?
Use the Request a Quote form on this page to request current availability, lead time, minimum order quantity, and delivery packaging for the KSZ8051MLL-TR. Because the exact ordering code includes the tape-and-reel “-TR” suffix, confirm that the quoted MPN is KSZ8051MLL-TR rather than the non-tape KSZ8051MLL. The manufacturer’s product page is the appropriate starting point for lifecycle confirmation.
What is the price of KSZ8051MLL-TR?
Current commercial pricing for the KSZ8051MLL-TR should be requested through the Request a Quote form on this page. The request should identify the exact 48-LQFP tape-and-reel ordering code, required quantity, shipment destination, and target delivery date. This avoids confusion with the closely named KSZ8051MLL ordering code and provides a quotation tied to the requested supply configuration.
What is the lead time for KSZ8051MLL-TR?
The current lead time for KSZ8051MLL-TR should be confirmed through the Request a Quote form on this page. Submit the required quantity and packaging details so the quotation can reflect current production, obsolete-part, or authorized-sourcing status. The manufacturer product page identifies the KSZ8051 family, while individual distributor records can distinguish the exact tape-and-reel ordering code from the non- tape variant.

Mühendislik referans verileri: KSZ8051MLL-TR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Select the KSZ8051MLL-TR when maintaining an established 10/100 Ethernet design that uses a 3.3 V supply, full MII controller interface, and 48-LQFP footprint. Its documented KSZ8051-family AEC-Q100 qualification makes it relevant to automotive Ethernet platforms, provided the complete system meets its environmental and qualification requirements. The KSZ8051MLLI-TR is the closest identified same-package alternative, but the temperature-grade suffix must be checked before substitution. Related KSZ8041 and KSZ8081 devices should not be selected solely because they use a similar lead count; their pin assignments, clocking, strap behavior, and electrical timing must match the existing controller design. For new 1 Gb/s, multi-gigabit, or highly integrated systems, choose a current Ethernet PHY instead of carrying forward this legacy MII architecture.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün KSZ8051MLLI-TR
Brand Microchip Technology Microchip Technology
Package 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm)
Product Type 10BASE-T/100BASE-TX Ethernet PHY transceiver 10BASE-T/100BASE-TX Ethernet PHY transceiver
Supply Voltage 3.3 V 3.3 V
Supported Data Rates 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s
MAC Interface Full MII Full MII
Delivery Format Tape and reel (-TR) Tape and reel (-TR)

Ana Farklılayıcılar

  • Exact same-family 48-LQFP replacement route (karşılaştırma:KSZ8051MLLI-TR)
  • AEC-Q100 qualification for automotive designs (karşılaştırma:KSZ8051MLLI-TR)
  • Legacy full-MII compatibility (karşılaştırma:KSZ8051MLLI-TR)

Tasarım Notları

Route the 3.3 V supply and ground connections directly to the 48-LQFP with short, low-impedance paths, and place the manufacturer-recommended bypass capacitors adjacent to the corresponding leads. Avoid sharing narrow supply traces between the PHY and unrelated digital loads. A continuous ground plane beneath the device gives the MII and analog-network pins a low-inductance return path, reducing susceptibility to switching noise and Ethernet common-mode disturbances.

Keep the MII clock and associated data traces together as a controlled group, use the MAC’s specified clock mode, and avoid unnecessary test pads or long branch stubs on timing-sensitive nets. Match trace lengths where the Ethernet controller and PHY documentation requires it. Preserve a continuous reference plane below the group so that the MII signals retain predictable impedance and edge behavior at the controller-to-PHY boundary.

Separate the PHY’s analog network-side routing from switching-regulator loops, high-current relays, and other noisy digital returns. Route the connection toward the network magnetics with short, controlled paths and avoid copper structures that interrupt the intended return current. Keep the RJ45 and magnetics section away from sensitive sensor or measurement circuitry because cable-borne transients and common-mode currents can couple directly into the PHY’s analog pins.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Microchip Technology identifies the KSZ8051 family as AEC-Q100 standard qualified. Other compliance declarations are not stated for the exact ordering code in the manufacturer information available for this record.

Veri doğrulanma tarihi: 2026-11-14 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

ksz8051mll datasheet KSZ8051MLL-TR datasheet KSZ8051MLL-TR pinout KSZ8051MLL-TR datasheet pdf KSZ8051MLL-TR equivalent KSZ8051MLL-TR replacement KSZ8051MLL-TR 48-LQFP KSZ8051MLL-TR 3.3V KSZ8051MLL-TR full MII KSZ8051MLL-TR automotive Ethernet Microchip Technology KSZ8051MLL-TR KSZ8051MLL-TR price KSZ8051MLL-TR stock KSZ8051MLL-TR vs KSZ8051MLLI-TR KSZ8051MLL application circuit

İlgili Bileşenler ve Terimler

Microchip Technology KSZ8051MLL-TR KSZ8051MLLI-TR KSZ8051MLL Ethernet PHY physical-layer transceiver Ethernet transceiver 10BASE-T 100BASE-TX Media Independent Interface MII 3.3 V 48-LQFP LQFP surface-mount package CAT-5 unshielded twisted pair AEC-Q100 automotive Ethernet industrial Ethernet RJ45 network magnetics embedded controller Ethernet MAC semiconductor
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle