KSZ8851-32MQLI - 10/100 Ethernet Controller | Microchip
MPN: KSZ8851-32MQLI ✓ AktifKSZ8851-32MQLI Genel Bakış
An Ethernet MAC controller is an interface integrated circuit that manages frame handling and connects a processor or other bus-based host to an Ethernet physical layer. The KSZ8851 combines the MAC, a 10/100 Base-T/TX PHY, LED indication, wake-up functionality, and a low-power operating mode in one device. Within the semiconductor hierarchy, it belongs to the Ethernet controller and network-interface IC class rather than a general-purpose processor or standalone Ethernet transceiver.
The -32MQLI configuration provides a 32-bit non-PCI host interface, making it suitable for embedded processors that can accommodate a wide parallel bus. The 10/100 capability supports legacy Fast Ethernet networks, while the integrated PHY reduces the external component count compared with separate MAC and PHY implementations. Programmable LED indication supports simplified link, activity, and speed-status reporting, and the documented wake-up and low-power features can improve system responsiveness and energy behavior.
The KSZ8851 family is offered in 32-, 48-, and 128-pin packages, allowing the same controller family to address different host-interface and board-space requirements. This specific 128-pin PQFP variant provides a conventional parallel-bus connection to the embedded CPU while keeping the Ethernet MAC and physical-layer functions together. Microchip describes the family as a cost-effective solution for adding Ethernet to traditional embedded systems.
Typical uses include industrial controllers, embedded data loggers, factory equipment, building-automation gateways, and network-accessible test instruments. In these systems, the host processor can exchange Ethernet frames through the generic 32-bit bus while the controller handles the physical 10/100 link. Systems requiring additional network ports can pair it with a managed Ethernet switch or multi-port PHY while retaining a conventional processor-centric architecture.
PCB design should account for the 128-pin PQFP footprint, controlled-impedance signal routing for the parallel host bus, and separation between high-speed digital signals and the Ethernet magnetics and network-side routing. Follow the manufacturer’s reference schematic, component values, and layout guidance in datasheet DS00002425B. The system designer must also verify clock, reset, interrupt, PHY, and power-supply requirements against the complete device pin-description table before releasing the PCB.
This product page combines the manufacturer family description with distributor package information, sourcing guidance, application analysis, and engineering design notes. It also distinguishes the exact 32-bit industrial-temperature ordering code from related family members so that engineers can review footprint, interface width, and qualification requirements before committing a design to the PCB.
Drop-in alternatifler için KSZ8851-32MQLI — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
KSZ8851-32MQL
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
KSZ8851-32MQL-TR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
KSZ8851-32MQLI-TR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
KSZ8851-16MQLI
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ET1010-128T
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
KSZ8851-32MQLI Özellikler
| Product Type | Single-port Ethernet MAC controller with integrated 10/100 PHY |
| Ethernet Data Rate | 10/100 Mbps |
| Physical Layer Standard | 10/100 Base-T/TX |
| Host Interface | Generic 32-bit parallel non-PCI interface |
| Core Operating Voltage | 3.1 V to 3.5 V |
| Paket | 128-pin PQFP, 14 mm x 20 mm |
| Montaj Türü | Surface-mount PQFP |
| Wake-Up Function | Supported |
| Programmable LED Indication | Supported |
| Low-Power Mode | Supported |
| Number of Ethernet Ports | 1 port |
| Interface Width | 32 bits |
| RoHS Durumu | Compliant |
| Manufacturer Data Sheet | DS00002425B |
KSZ8851-32MQLI 128-pin pqfp, 14 mm x 20 mm Pin Yapısı Kılavuzu
KSZ8851-32MQLI (128-pin pqfp, 14 mm x 20 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: KSZ8851-32MQLI.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
KSZ8851-32MQLI için uygundur 6 uygulamas: Industrial Embedded Controller, Factory Data Logger, Building Automation Gateway, Networked Test Instrument, Embedded Network Storage Controller, IoT Edge Controller.
Industrial Embedded Controller
The KSZ8851-32MQLI fits industrial embedded controllers that need a dedicated 10/100 Ethernet port without adding a separate MAC and PHY to the board. Its 32-bit generic non-PCI interface provides a wider host path than the 16-bit family member, which can reduce the number of bus transfers needed when the processor exchanges larger frames. The integrated 10/100 Base-T/TX PHY also consolidates the Ethernet front end. Designers should still isolate the network-side copper routing from clock-sensitive circuitry and follow the reference magnetics and termination arrangement in DS00002425B.
Önerilen
Factory Data Logger
A factory data logger can use the KSZ8851-32MQLI to place its 10/100 Ethernet link under processor control without relying on a PCI bus. The integrated MAC/PHY arrangement reduces the number of high-speed interface components and makes the controller suitable for embedded monitoring equipment. The 32-bit parallel interface can move frame data efficiently to a capable processor, while programmable LED indication provides local link or activity feedback. A practical design should budget filtering, boot order, and wake-up behavior so that network availability does not delay the primary logging task.
Önerilen
Building Automation Gateway
The KSZ8851-32MQLI is suitable for a building-automation gateway that connects sensors, HVAC controls, or access equipment to a 10/100 Ethernet network. Its generic 32-bit host interface suits embedded processors with a parallel peripheral bus, while the integrated PHY keeps the copper Ethernet implementation compact. Wake-up functionality and low-power operation can support systems that are not accessed continuously. For reliable operation, validate the gateway’s operating-temperature requirement, Ethernet isolation strategy, and behavior during network-link loss before fixing the component in the BOM.
Önerilen
Networked Test Instrument
Test and measurement instruments can use the KSZ8851-32MQLI to add a 10/100 Ethernet management port to an embedded control platform. The device combines an Ethernet MAC controller and PHY in one package, and its 32-bit non-PCI bus connects to a processor without requiring a desktop-style peripheral bus. Programmable LED indication can expose link and activity status at the front panel or board level. System designers should separate the Ethernet magnetics and network-side traces from sensitive measurement circuitry, particularly in instruments that combine analog input, clock, and communication functions.
Önerilen
Embedded Network Storage Controller
The KSZ8851-32MQLI can provide network attachment for embedded logging, indexing, or remote-access storage controllers that operate at Fast Ethernet rates. Its 32-bit host interface provides more data bandwidth than a 16-bit implementation, while the integrated 10/100 PHY simplifies the physical-layer design. The controller is most appropriate where 100 Mbps Ethernet is sufficient and a low-cost parallel CPU interface is preferred to PCI. Firmware should include link monitoring, controlled reconnection, and buffer-management behavior so that storage operations remain stable during network disruption.
Önerilen
IoT Edge Controller
The KSZ8851-32MQLI can serve as the wired Ethernet link in an IoT edge controller that bridges local sensors or actuators to a larger network. Its single-port 10/100 MAC/PHY implementation is suited to gateways with modest throughput requirements, and the generic 32-bit parallel interface allows connection to a range of embedded processors. Low-power mode and wake-up functionality are useful for systems that spend part of their operating time idle. Because 10/100 Ethernet is not Gigabit Ethernet, the design should use local buffering and prioritize traffic when uplinks become congested.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: KSZ8851-32MQLI — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | KSZ8851-32MQL | KSZ8851-32MQL-TR | KSZ8851-32MQLI-TR | KSZ8851-16MQLI | ET1010-128T |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Broadcom |
| Ethernet Speed | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps functional-equivalent class |
Ana Farklılayıcılar
- Wider non-PCI host interface (karşılaştırma:KSZ8851-16MQLI)
- Integrated single-port MAC and PHY (karşılaştırma:ET1010-128T)
- Exact industrial-grade family ordering option (karşılaştırma:KSZ8851-32MQL-TR)
Tasarım Notları
Use the 128-pin PQFP land pattern and reference schematic in Microchip datasheet DS00002425B as the layout authority. Route the 32-bit host bus on a controlled-impedance layer, avoid unnecessary stubs, and follow the processor interface’s timing and topology requirements. Keep the Ethernet-side traces, magnetics, and protection components away from clock and sensitive sensor routes. Review pad assignments for the exact ordering code because the host-interface width changes the signal utilization of related family members.
Design the 3.1 V to 3.5 V core rail to meet the controller’s current, sequencing, and decoupling requirements stated in the manufacturer datasheet. Place the recommended bypass capacitors at their associated supply pins with short ground returns, and provide a clean return path beneath or near the device where the package layout permits. Confirm how Ethernet magnetics and external circuitry affect supply noise and ground current before treating the stated supply range as sufficient for the complete board.
Do not substitute KSZ8851-16MQLI for KSZ8851-32MQLI solely because both use a 128-pin PQFP. The former has a 16-bit host interface rather than the target’s 32-bit interface, creating a 50% difference in interface width and potentially changing pin utilization. Similarly, verify temperature and delivery suffixes when ordering KSZ8851-32MQL family members. Validate clock, reset, interrupt, LED, and PHY strap settings against the manufacturer pin table for the exact selected MPN.
Uyumluluk Bilgisi
RoHS status is stated for the exact product listing. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code.