Microchip Technology

KSZ8851-32MQLI - 10/100 Ethernet Controller | Microchip

MPN: KSZ8851-32MQLI ✓ نشط
3.1 V to 3.5 V Vdss 128-pin PQFP, 14 mm x 20 mm Package
الحد الأدنى للطلب: 1 |

KSZ8851-32MQLI نظرة عامة

Microchip Technology KSZ8851-32MQLI is a single-port 10/100 Base-T Ethernet MAC controller with an integrated PHY and a generic 32-bit parallel CPU interface. The device operates from a 3.1 V to 3.5 V core supply and is packaged in a 128-pin PQFP measuring 14 mm by 20 mm. It is intended for embedded systems that require economical, high-throughput Ethernet connectivity without PCI.

An Ethernet MAC controller is an interface integrated circuit that manages frame handling and connects a processor or other bus-based host to an Ethernet physical layer. The KSZ8851 combines the MAC, a 10/100 Base-T/TX PHY, LED indication, wake-up functionality, and a low-power operating mode in one device. Within the semiconductor hierarchy, it belongs to the Ethernet controller and network-interface IC class rather than a general-purpose processor or standalone Ethernet transceiver.

The -32MQLI configuration provides a 32-bit non-PCI host interface, making it suitable for embedded processors that can accommodate a wide parallel bus. The 10/100 capability supports legacy Fast Ethernet networks, while the integrated PHY reduces the external component count compared with separate MAC and PHY implementations. Programmable LED indication supports simplified link, activity, and speed-status reporting, and the documented wake-up and low-power features can improve system responsiveness and energy behavior.

The KSZ8851 family is offered in 32-, 48-, and 128-pin packages, allowing the same controller family to address different host-interface and board-space requirements. This specific 128-pin PQFP variant provides a conventional parallel-bus connection to the embedded CPU while keeping the Ethernet MAC and physical-layer functions together. Microchip describes the family as a cost-effective solution for adding Ethernet to traditional embedded systems.

Typical uses include industrial controllers, embedded data loggers, factory equipment, building-automation gateways, and network-accessible test instruments. In these systems, the host processor can exchange Ethernet frames through the generic 32-bit bus while the controller handles the physical 10/100 link. Systems requiring additional network ports can pair it with a managed Ethernet switch or multi-port PHY while retaining a conventional processor-centric architecture.

PCB design should account for the 128-pin PQFP footprint, controlled-impedance signal routing for the parallel host bus, and separation between high-speed digital signals and the Ethernet magnetics and network-side routing. Follow the manufacturer’s reference schematic, component values, and layout guidance in datasheet DS00002425B. The system designer must also verify clock, reset, interrupt, PHY, and power-supply requirements against the complete device pin-description table before releasing the PCB.

This product page combines the manufacturer family description with distributor package information, sourcing guidance, application analysis, and engineering design notes. It also distinguishes the exact 32-bit industrial-temperature ordering code from related family members so that engineers can review footprint, interface width, and qualification requirements before committing a design to the PCB.

بدائل مباشرة لـ KSZ8851-32MQLI — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

KSZ8851-32MQL

✅ بديل مباشر
📦 128-PQFP (14x20)
Same 32-bit Ethernet controller and 128-pin PQFP footprint; ordering-code temperature or qualification suffix differs by an unquantified manufacturer limit

📋 بديل مرجعي (غير موجود في الكتالوج)

KSZ8851-32MQL-TR

✅ بديل مباشر
📦 128-PQFP (14x20)
Same 32-bit controller and 128-pin PQFP footprint; tape-and-reel ordering format changes handling with 0% change to the stated electrical ratings

📋 بديل مرجعي (غير موجود في الكتالوج)

KSZ8851-32MQLI-TR

✅ بديل مباشر
📦 128-PQFP (14x20)
Same 32-bit controller and 128-pin PQFP footprint; tape-and-reel delivery format changes handling with 0% change to the stated electrical ratings

📋 بديل مرجعي (غير موجود في الكتالوج)

KSZ8851-16MQLI

✅ بديل مباشر
📦 128-PQFP (14x20)
Same 128-pin PQFP footprint and Ethernet function, but the parallel host interface is 16 bits instead of 32 bits, a 50% reduction in interface width

📋 بديل مرجعي (غير موجود في الكتالوج)

ET1010-128T

✅ بديل مباشر
📦 128-pin Ethernet controller package
Listed as a 10/100 Ethernet controller functional equivalent in the same 128-pin class; detailed electrical and register differences are

📋 بديل مرجعي (غير موجود في الكتالوج)

KSZ8851-32MQLI المواصفات

Product Type Single-port Ethernet MAC controller with integrated 10/100 PHY
Ethernet Data Rate 10/100 Mbps
Physical Layer Standard 10/100 Base-T/TX
Host Interface Generic 32-bit parallel non-PCI interface
Core Operating Voltage 3.1 V to 3.5 V
العلبة 128-pin PQFP, 14 mm x 20 mm
نوع التركيب Surface-mount PQFP
Wake-Up Function Supported
Programmable LED Indication Supported
Low-Power Mode Supported
Number of Ethernet Ports 1 port
Interface Width 32 bits
حالة RoHS Compliant
Manufacturer Data Sheet DS00002425B

دليل تكوين أطراف KSZ8851-32MQLI 128-pin pqfp, 14 mm x 20 mm

تكوين الأطراف لـ KSZ8851-32MQLI (حزمة 128-pin pqfp, 14 mm x 20 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 128-pin pqfp, 14 mm x 20 mm لـ KSZ8851-32MQLI

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ KSZ8851-32MQLI.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

KSZ8851-32MQLI مناسب لـ 6 التطبيقs: Industrial Embedded Controller, Factory Data Logger, Building Automation Gateway, Networked Test Instrument, Embedded Network Storage Controller, IoT Edge Controller.

🏭

Industrial Embedded Controller

The KSZ8851-32MQLI fits industrial embedded controllers that need a dedicated 10/100 Ethernet port without adding a separate MAC and PHY to the board. Its 32-bit generic non-PCI interface provides a wider host path than the 16-bit family member, which can reduce the number of bus transfers needed when the processor exchanges larger frames. The integrated 10/100 Base-T/TX PHY also consolidates the Ethernet front end. Designers should still isolate the network-side copper routing from clock-sensitive circuitry and follow the reference magnetics and termination arrangement in DS00002425B.

🖥️

Factory Data Logger

A factory data logger can use the KSZ8851-32MQLI to place its 10/100 Ethernet link under processor control without relying on a PCI bus. The integrated MAC/PHY arrangement reduces the number of high-speed interface components and makes the controller suitable for embedded monitoring equipment. The 32-bit parallel interface can move frame data efficiently to a capable processor, while programmable LED indication provides local link or activity feedback. A practical design should budget filtering, boot order, and wake-up behavior so that network availability does not delay the primary logging task.

🧩

Building Automation Gateway

The KSZ8851-32MQLI is suitable for a building-automation gateway that connects sensors, HVAC controls, or access equipment to a 10/100 Ethernet network. Its generic 32-bit host interface suits embedded processors with a parallel peripheral bus, while the integrated PHY keeps the copper Ethernet implementation compact. Wake-up functionality and low-power operation can support systems that are not accessed continuously. For reliable operation, validate the gateway’s operating-temperature requirement, Ethernet isolation strategy, and behavior during network-link loss before fixing the component in the BOM.

🔧

Networked Test Instrument

Test and measurement instruments can use the KSZ8851-32MQLI to add a 10/100 Ethernet management port to an embedded control platform. The device combines an Ethernet MAC controller and PHY in one package, and its 32-bit non-PCI bus connects to a processor without requiring a desktop-style peripheral bus. Programmable LED indication can expose link and activity status at the front panel or board level. System designers should separate the Ethernet magnetics and network-side traces from sensitive measurement circuitry, particularly in instruments that combine analog input, clock, and communication functions.

🖥️

Embedded Network Storage Controller

The KSZ8851-32MQLI can provide network attachment for embedded logging, indexing, or remote-access storage controllers that operate at Fast Ethernet rates. Its 32-bit host interface provides more data bandwidth than a 16-bit implementation, while the integrated 10/100 PHY simplifies the physical-layer design. The controller is most appropriate where 100 Mbps Ethernet is sufficient and a low-cost parallel CPU interface is preferred to PCI. Firmware should include link monitoring, controlled reconnection, and buffer-management behavior so that storage operations remain stable during network disruption.

🧩

IoT Edge Controller

The KSZ8851-32MQLI can serve as the wired Ethernet link in an IoT edge controller that bridges local sensors or actuators to a larger network. Its single-port 10/100 MAC/PHY implementation is suited to gateways with modest throughput requirements, and the generic 32-bit parallel interface allows connection to a range of embedded processors. Low-power mode and wake-up functionality are useful for systems that spend part of their operating time idle. Because 10/100 Ethernet is not Gigabit Ethernet, the design should use local buffering and prioritize traffic when uplinks become congested.

What is the KSZ8851-32MQLI?
The KSZ8851-32MQLI is a Microchip Technology single-port Ethernet MAC controller with an integrated 10/100 Base-T/TX PHY and a generic 32-bit non-PCI processor interface. According to the Microchip KSZ8851 family description, the controller is intended for cost-effective, high-throughput Ethernet connectivity in traditional embedded systems. It is supplied in a 128-pin PQFP measuring 14 mm by 20 mm and operates from a 3.1 V to 3.5 V core supply.
What Ethernet speed does KSZ8851-32MQLI support?
The KSZ8851-32MQLI supports 10 Mbps and 100 Mbps Ethernet operation through its integrated 10/100 Base-T/TX physical layer. The Microchip manufacturer page identifies the KSZ8851 as a single-port controller for embedded Ethernet, while the product listing identifies this ordering code as a 10/100 Base-T/TX PHY device. It therefore suits Fast Ethernet links and legacy embedded networks rather than Gigabit Ethernet designs.
Where can I download the KSZ8851-32MQLI datasheet PDF?
The official KSZ8851-32MQLI datasheet PDF is the Microchip document DS00002425B, titled for the KSZ8851-16/32MQL family. Download it directly from the Microchip document URL listed on this page. The document covers the 128-pin PQFP KSZ8851-16/32MQL devices with 8-, 16-, or 32-bit generic processor interfaces and should be used for pin assignments, electrical characteristics, and reference-circuit details.
Where can I find the KSZ8851-32MQLI pinout?
The KSZ8851-32MQLI pinout is documented in the pin-description and package diagrams contained in Microchip datasheet DS00002425B. The component uses a 128-pin PQFP package, and its 32-bit host interface, power pins, clock, reset, interrupt, LED, and Ethernet functions must be assigned from the manufacturer’s complete pin table. Use that table during schematic capture and cross-check every PCB pad against the selected ordering code.
What is the difference between KSZ8851-32MQLI and KSZ8851-16MQLI?
The primary difference is the width of the generic non-PCI processor interface: KSZ8851-32MQLI provides a 32-bit bus, while KSZ8851-16MQLI provides a 16-bit bus. Both appear in the 128-pin PQFP listing and belong to the KSZ8851-16/32MQL family described by Microchip. A 16-bit implementation can require half as many host data lines, but its bus transfer width is 50% lower than the 32-bit version, so the system bus and firmware must be reevaluated.
Is the KSZ8851-32MQLI PCI compatible?
No. The KSZ8851-32MQLI uses a generic 32-bit non-PCI processor interface. Microchip describes the KSZ8851 family as supporting SPI or 8-, 16-, and 32-bit non-PCI CPU interfaces for embedded systems. The exact electrical signaling, chip-select, interrupt, and bus timing requirements should therefore be checked in datasheet DS00002425B rather than assuming standard desktop PCI behavior.
What are the key specifications of KSZ8851-32MQLI that engineers should know?
The key KSZ8851-32MQLI specifications are a 10/100 Mbps Ethernet rate, integrated 10/100 Base-T/TX PHY, 32-bit generic non-PCI host interface, and 3.1 V to 3.5 V core operating range. Microchip also identifies wake-up functionality, programmable LED indication, and a low-power mode for this controller family. The device is packaged in a surface-mount 128-pin PQFP with a 14 mm by 20 mm body, making footprint density and host-bus routing central design considerations.
What can replace the KSZ8851-32MQLI?
The closest documented drop-in choices are ordering variants of the KSZ8851-32MQL silicon and the listed ET1010-128T functional equivalent. Microchip’s cross-reference material identifies KSZ8851-32MQL, KSZ8851-32MQL-TR, and KSZ8851-32MQLI-TR as related alternatives, while a catalog cross-reference associates ET1010-128T with the KSZ8851-32MQLI. Pin-by-pin and firmware compatibility must still be checked because package size alone does not confirm identical multiplexing or interface behavior.
Is the KSZ8851-32MQLI the same as the ET1010-128T?
The ET1010-128T is listed as a functional equivalent for the KSZ8851-32MQLI, but the relationship should not be treated as automatically identical. Both devices are associated with single-port 10/100 Ethernet controller use, yet software drivers, register maps, interrupt behavior, strap options, and package details can differ. Confirm every signal and register requirement against the respective manufacturer documentation before substituting the Broadcom device.
When should I choose KSZ8851-32MQLI over a 16-bit interface variant?
Choose the KSZ8851-32MQLI when the embedded processor can provide a 32-bit non-PCI bus and the design benefits from the wider data path. Compared with the 16-bit KSZ8851-16MQLI, its nominal bus width is twice as large, although actual throughput still depends on wait states, clock rate, and firmware efficiency. The 32-bit version is appropriate when bus cycles are constrained, while the 16-bit variant may simplify routing on a smaller-footprint design.
Is the KSZ8851-32MQLI suitable for an industrial controller?
The KSZ8851-32MQLI is suitable for industrial Ethernet controller designs that require a single 10/100 port, a parallel processor interface, and a compact integrated MAC/PHY implementation. Its documented wake-up function, programmable LED indication, low-power mode, and 32-bit bus support common embedded-control requirements. For deployment across industrial temperature limits or regulated industries, verify the ordering code’s temperature rating and applicable compliance documentation before production release.
How much power does the KSZ8851-32MQLI use?
The KSZ8851-32MQLI operates from a 3.1 V to 3.5 V core supply, but a defensible operating-current figure cannot be selected without the operating mode, clock condition, PHY state, and I/O load. Microchip datasheet DS00002425B contains the detailed current specifications and test conditions. Use those conditions when comparing the controller with another Ethernet device because a headline voltage range alone does not describe total board-level power consumption.
Does KSZ8851-32MQLI need an external Ethernet PHY?
The KSZ8851-32MQLI integrates a 10/100 Base-T/TX PHY with the Ethernet MAC controller. An external Ethernet transformer and the associated passive network components are still required for a conventional copper Ethernet connection, as specified by the manufacturer reference circuit. The device should therefore not be confused with a MAC-only controller that depends on an external PHY, although final magnetics and termination choices must follow the reference design.
Where can I buy KSZ8851-32MQLI and what is its lead time?
Use the Request a Quote form on this page to request KSZ8851-32MQLI availability, current pricing, minimum order quantity, and lead time. The Request a Quote workflow provides a direct purchasing path without embedding prices that can change between catalog updates. For a production schedule, include the required quantity, reel or tray preference, date code requirements, and destination country when submitting the request.
How do I design a PCB for KSZ8851-32MQLI?
Start with the manufacturer reference schematic and the 128-pin PQFP land pattern in datasheet DS00002425B. Route the 32-bit host bus with impedance-controlled, length-matched topology where the processor interface requires it, and place termination or series damping exactly as the application guidance specifies. Keep the Ethernet-side network routing and magnetics area separated from sensitive clock and parallel-bus traces, then verify power, ground, clock, reset, and LED connections against the complete pin table.
Is the KSZ8851-32MQLI RoHS compliant?
The KSZ8851-32MQLI is identified as RoHS compliant in the product listing for the exact ordering code. RoHS compliance addresses restricted substances in electrical and electronic equipment, but it does not by itself establish automotive qualification, industrial-temperature coverage, or regulatory approval for every end product. Confirm the full ordering code, package suffix, and latest manufacturer declarations before treating the component as approved for a specific market or qualification program.

بيانات مرجعية هندسية لـ KSZ8851-32MQLI — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose KSZ8851-32MQLI when an embedded processor needs a single-port 10/100 Ethernet connection through a generic 32-bit non-PCI bus and the project can accommodate a 128-pin PQFP. KSZ8851-32MQL and the corresponding -TR ordering variants are practical choices when the required qualification or delivery format differs, but their ordering suffixes must match the production environment. KSZ8851-16MQLI uses the same PQFP size yet reduces the host interface from 32 to 16 bits, so choose it only after confirming the processor bus and firmware can operate with half the data width. ET1010-128T is documented as a functional equivalent, but it should be selected only after a complete pin, register, clock, strap, and driver comparison establishes compatibility.

المقارنة مع البدائل

المعامل هذا المنتج KSZ8851-32MQL KSZ8851-32MQL-TR KSZ8851-32MQLI-TR KSZ8851-16MQLI ET1010-128T
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Broadcom
Ethernet Speed 10/100 Mbps 10/100 Mbps 10/100 Mbps 10/100 Mbps 10/100 Mbps 10/100 Mbps functional-equivalent class

أبرز الفروقات

  • Wider non-PCI host interface (مقابلKSZ8851-16MQLI)
  • Integrated single-port MAC and PHY (مقابلET1010-128T)
  • Exact industrial-grade family ordering option (مقابلKSZ8851-32MQL-TR)

ملاحظات التصميم

Use the 128-pin PQFP land pattern and reference schematic in Microchip datasheet DS00002425B as the layout authority. Route the 32-bit host bus on a controlled-impedance layer, avoid unnecessary stubs, and follow the processor interface’s timing and topology requirements. Keep the Ethernet-side traces, magnetics, and protection components away from clock and sensitive sensor routes. Review pad assignments for the exact ordering code because the host-interface width changes the signal utilization of related family members.

Design the 3.1 V to 3.5 V core rail to meet the controller’s current, sequencing, and decoupling requirements stated in the manufacturer datasheet. Place the recommended bypass capacitors at their associated supply pins with short ground returns, and provide a clean return path beneath or near the device where the package layout permits. Confirm how Ethernet magnetics and external circuitry affect supply noise and ground current before treating the stated supply range as sufficient for the complete board.

Do not substitute KSZ8851-16MQLI for KSZ8851-32MQLI solely because both use a 128-pin PQFP. The former has a 16-bit host interface rather than the target’s 32-bit interface, creating a 50% difference in interface width and potentially changing pin utilization. Similarly, verify temperature and delivery suffixes when ordering KSZ8851-32MQL family members. Validate clock, reset, interrupt, LED, and PHY strap settings against the manufacturer pin table for the exact selected MPN.

معلومات الامتثال

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

RoHS status is stated for the exact product listing. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ksz8851 datasheet ksz8851 pdf microchip ksz8851 micrel ksz8851 ksz8851 eval board ksz8851 16mll ksz8851 16mlli ksz8851 16mql KSZ8851-32MQLI datasheet pdf KSZ8851-32MQLI pinout KSZ8851-32MQLI equivalent KSZ8851-32MQLI replacement KSZ8851-32MQLI price KSZ8851-32MQLI stock KSZ8851-32MQLI footprint

المكونات والمصطلحات ذات الصلة

Microchip Technology KSZ8851-32MQLI KSZ8851-32MQL KSZ8851-32MQL-TR KSZ8851-32MQLI-TR KSZ8851-16MQLI ET1010-128T Ethernet MAC controller network interface IC integrated PHY 10/100 Base-T/TX Fast Ethernet 32-bit non-PCI interface 16-bit non-PCI interface 128-pin PQFP surface-mount package programmable LED indication wake-up function low-power mode industrial embedded controller factory data logger building automation gateway networked test instrument Ethernet magnetics RoHS
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر