Microchip Technology

KSZ8873RLLI-TR - 3-Port 10/100 Ethernet Switch | Microchip (Tape & Reel)

MPN: KSZ8873RLLI-TR ✓ Aktif
1.8 V, 2.5 V, and 3.3 V Vdss 115 mA Id LQFP-48 Package
MOQ: 1 |

KSZ8873RLLI-TR Genel Bakış

The Microchip Technology KSZ8873RLLI-TR is a highly integrated three-port managed Ethernet switch with integrated 10/100 Base-T/TX PHYs, supporting data rates up to 100 Mbps and operating from 1.8 V, 2.5 V, or 3.3 V supplies. The device combines an Ethernet switch, three physical-layer interfaces, and host-control connectivity in a compact LQFP-48 package. Its interface options include I2C, SPI, and RMII, allowing it to suit embedded network equipment, industrial controllers, and cost-sensitive Ethernet systems.

An integrated managed Ethernet switch connects multiple physical-layer ports through one switching engine, reducing the need for discrete PHYs, magnetics interfaces, and separate switch controllers. The KSZ8873 series is positioned for low-port-count, power-efficient 10/100 Mbps networks where three integrated PHYs provide a compact bridge between copper Ethernet interfaces and a host processor or embedded control system.

Key features include three integrated 10/100 Ethernet ports, operation at up to 100 Mbps, a typical 115 mA supply current, and support for 1.8 V, 2.5 V, or 3.3 V supply levels. The combination of I2C and SPI host interfaces supports configuration access from embedded processors, while the RMII interface provides a dedicated connection to a network controller. The LQFP-48 package supports conventional surface-mount assembly and thermal copper-area integration.

The device uses a mixed 1.8 V, 2.5 V, and 3.3 V supply architecture, allowing system designers to align core and interface voltage domains. A 115 mA typical operating current is particularly useful for compact embedded platforms where the Ethernet function must coexist with power-limited processors and sensors. The three integrated PHYs also reduce board area by consolidating three copper-network interface sections into one switching IC.

Typical applications include industrial Ethernet gateways, embedded control systems, set-top and network appliances, instrumentation platforms, and low-cost Ethernet bridges. The switch is especially useful when a board needs several 10/100 ports but a higher-speed multi-gigabit switching architecture would add unnecessary cost, power, and complexity.

Designers should account for the specified operating temperature of -40°C to +85°C and verify every power rail against the manufacturer's recommended sequencing and decoupling requirements. Ethernet magnetics, center-tap capacitors, impedance-controlled differential pairs, and connector layout remain essential even when the PHY and switch functions are integrated into one package.

This product overview combines port, interface, voltage, packaging, and lifecycle information with application guidance and engineering selection notes. It also identifies the strength and limitations of available drop-in alternatives, helping engineers validate footprint compatibility, operating conditions, and host-interface requirements before making a PCB or sourcing decision.

Drop-in alternatifler için KSZ8873RLLI-TR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller KSZ8873RLLI-TR (aynı form faktörü ve ayağa oturma) — farklı olan Integrated PHYs, Product Type, Supply Voltage Options.

Microchip Technology
Integrated PHYs: 3 integrated 10/100 PHYs
Product Type: 3-port managed Ethernet switch with integrated PHYs
Supply Voltage Options: 1.8 V, 2.5 V, or 3.3 V
İle Karşılaştır KSZ8873RLLI-TR →

KSZ8873MLLI

✅ Yerleştirme
Microchip Technology
📦 LQFP-48
3-port managed Ethernet switch with integrated PHYs · 3 ports · 10/100 Mbps · MII · I2C and SPI · 64-pin PQFP · 10 x 10 mm · Surface mount

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

KSZ8873RLLI-TR Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Integrated 3-port managed Ethernet switch with PHYs
Number of Ethernet Ports 3 ports
Ethernet Data Rate 10/100 Mbps
Physical Layer Standard 10/100 Base-T/TX PHY
Host Control Interfaces I2C and SPI
Processor Interface RMII
Supply Voltage Options 1.8 V, 2.5 V, and 3.3 V
Typical Supply Current 115 mA
İşletim Sıcaklığı -40°C to +85°C
Paket LQFP-48
Montaj Türü Surface mount
Part Status Active
Integrated PHYs 3 integrated PHYs
Switch Port Count 3-port switch-on-chip

KSZ8873RLLI-TR lqfp-48 Pin Yapısı Kılavuzu

KSZ8873RLLI-TR (lqfp-48 paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

lqfp-48 paket pin çizelgesi için KSZ8873RLLI-TR

Ayrıntılı pin çıkış verisi mevcut değil: KSZ8873RLLI-TR.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

KSZ8873RLLI-TR için uygundur 6 uygulamas: Industrial Ethernet Gateway, Embedded Control System, Network Appliance, Instrumentation Platform, Set-Top Networking, IoT Gateway.

🏭

Industrial Ethernet Gateway

The KSZ8873RLLI-TR fits an industrial gateway that must consolidate three 10/100 Mbps copper links into one embedded controller. Its three integrated PHYs reduce the number of separate Ethernet interface devices, while I2C or SPI can provide configuration access and RMII can carry network traffic. The -40°C to +85°C operating range is appropriate for equipment positioned between controlled indoor electronics and harsher industrial environments. Designers should still implement the required Ethernet magnetics, center-tap network components, and controlled differential routing. The 115 mA typical supply current also allows the switching subsystem to be budgeted alongside an embedded processor and communication transceivers.

🔧

Embedded Control System

The KSZ8873RLLI-TR is suitable for an embedded controller that needs to expose several 10/100 Ethernet connections without allocating several discrete PHY packages. A microcontroller can use I2C or SPI for switch configuration, while a network-capable processor connects through RMII for data transfer. Operating from 1.8 V, 2.5 V, or 3.3 V supply options helps align the switch with mixed-voltage embedded platforms. The key layout consideration is keeping the RMII clock and data signals away from Ethernet magnetics and switching-node return currents, because adjacent high-current copper interfaces can degrade signal integrity.

🌐

Network Appliance

A compact network appliance can use the KSZ8873RLLI-TR to provide three 10/100 Mbps switched ports for service modules, management interfaces, or downstream equipment. Integrating the PHYs and switch into one LQFP-48 device supports a small-footprint design while avoiding the area and power cost of three unrelated PHY implementations. The 115 mA typical current provides a useful starting point for system power budgeting, while the three supported supply levels support both legacy 2.5 V and 3.3 V interface domains. Product developers should validate connector creepage, isolation requirements, and thermal performance at the highest expected port activity before release.

📡

Instrumentation Platform

The KSZ8873RLLI-TR can serve instrumentation equipment that combines measurement electronics, a local controller, and Ethernet connectivity. Three integrated 10/100 ports can connect a service interface, a host computer, and remote test equipment while preserving a common switching function. The -40°C to +85°C range supports industrial bench and field equipment, and the low-port-count focus avoids the complexity of a larger switching ASIC. Precision analog and timing circuitry should be separated from Ethernet magnetics and high-di/dt power paths, while the switch’s supply rails should be filtered according to the manufacturer’s recommended application circuit.

📺

Set-Top Networking

In a compact set-top or network endpoint, the KSZ8873RLLI-TR can provide local 10/100 Ethernet service ports alongside another embedded network interface. Its three integrated PHYs and 115 mA typical current are appropriate for a low-port-count, cost-sensitive design where a larger Ethernet switch would add unnecessary board area. Configuration through I2C or SPI permits firmware-driven setup of the managed switching functions. The board should use a solid ground reference beneath the LQFP-48 device and short supply connections so switching-node energy does not couple into the host processor or sensitive RF and audio circuitry.

🧩

IoT Gateway

The KSZ8873RLLI-TR fits an IoT gateway that bridges several 10/100 Mbps Ethernet devices to an embedded host. Three integrated PHYs reduce board-level component count, and I2C or SPI supports centralized configuration of the managed switching function. The 1.8 V, 2.5 V, and 3.3 V supply options support common embedded voltage domains, while the -40°C to +85°C range suits industrial IoT equipment. Placement should prioritize a continuous ground plane and short RMII routing. Magnetic-component selection and copper Ethernet channel design remain essential because the integrated PHY does not replace transformer isolation or controlled-impedance PCB construction.

What is the KSZ8873RLLI-TR?
The KSZ8873RLLI-TR is an integrated three-port managed Ethernet switch with three 10/100 Base-T/TX PHYs. According to the Microchip KSZ8873 product page, the KSZ8873 family is designed for compact, cost-sensitive, and power-efficient 10/100 Mbps switching systems. It combines Ethernet switching, physical-layer interfaces, and host connectivity in an LQFP-48 package.
What are the key specifications of KSZ8873RLLI-TR that engineers should know?
The KSZ8873RLLI-TR provides three 10/100 Mbps Ethernet ports, integrated 10/100 Base-T/TX PHYs, 1.8 V, 2.5 V, and 3.3 V supply options, and a typical supply current of 115 mA. The manufacturer product page identifies I2C and SPI configuration connectivity, while the product listing identifies RMII. Its specified operating-temperature range is -40°C to +85°C.
How many Ethernet ports does KSZ8873RLLI-TR provide?
The KSZ8873RLLI-TR provides three integrated 10/100 Ethernet ports. The Microchip product page describes the KSZ8873 as a three-port switch-on-chip with PHYs, while the manufacturer datasheet listing calls it an integrated three-port 10/100 managed switch. Each port supports 10 Mbps or 100 Mbps operation within the specified Ethernet system design.
Where can I download the KSZ8873RLLI-TR datasheet PDF?
The KSZ8873RLLI-TR datasheet is accessed through the Microchip KSZ8873 product page, which provides the manufacturer's technical documents for the MLL, MLLI, FLL, FLLI, RLL, and RLLI variants. For a direct PDF download, use the manufacturer document link on that page and confirm that the downloaded revision includes the RLLI ordering information.
Where can I find the KSZ8873RLLI-TR pinout and package drawing?
The KSZ8873RLLI-TR pinout and package drawing are in the KSZ8873 manufacturer datasheet, specifically the pin-description and package-outline sections. The KSZ8873RLLI-TR uses an LQFP-48 package. Use the pin-description table when assigning board nets and the land-pattern drawing when creating the PCB footprint rather than deriving dimensions from an image alone.
What voltage supplies does KSZ8873RLLI-TR support?
The KSZ8873RLLI-TR supports 1.8 V, 2.5 V, and 3.3 V supply levels. These options allow the switch to operate in systems with 1.8 V, 2.5 V, or 3.3 V interface domains. Confirm each rail's nominal voltage, tolerance, sequencing, and decoupling requirements against the manufacturer datasheet before finalizing the power tree.
How much current does KSZ8873RLLI-TR consume?
The typical operating supply current for KSZ8873RLLI-TR is 115 mA, as stated in the manufacturer datasheet listing. Actual current depends on operating conditions, port activity, and which supply domains are active. Use the datasheet operating-current tables and thermal information when budgeting power for the complete Ethernet subsystem.
Is KSZ8873RLLI-TR suitable for industrial Ethernet equipment?
The KSZ8873RLLI-TR is suitable for industrial Ethernet applications requiring three 10/100 Mbps ports and an operating range of -40°C to +85°C. Its integrated PHYs simplify low-port-count Ethernet designs, while I2C, SPI, and RMII connectivity support embedded host configuration and network data transfer. Final suitability also depends on the required EMC, isolation, and qualification criteria.
When should I choose KSZ8873RLLI-TR instead of a discrete Ethernet controller?
Choose KSZ8873RLLI-TR when a design needs three integrated 10/100 Base-T/TX ports in one compact package and can use I2C, SPI, or RMII connectivity. It can reduce PHY and switching-component count compared with a discrete implementation. A discrete controller may be preferable when the product requires different port speeds, substantially more ports, specialized PHY features, or a processor interface not provided by this device.
What is the difference between KSZ8873RLLI-TR and KSZ8873MLLI?
KSZ8873RLLI-TR and KSZ8873MLLI belong to the same KSZ8873 family and are associated with the same managed three-port 10/100 switching function. The manufacturer product page lists MLL, MLLI, FLL, FLLI, RLL, and RLLI variants, but the ordering-code distinctions must be checked in the package and ordering tables. Confirm temperature grade, package suffix, and tape-and-reel requirements before substitution.
Can KSZ8873MLLI replace KSZ8873RLLI-TR on the same PCB?
KSZ8873MLLI may be a candidate for a same-family replacement, but it should not be installed solely from the family name. The manufacturer product page lists both variants, and a comparison source specifically covers them; however, the suffix still needs to be checked for package, temperature, and order-code differences. Review the ordering table and compare every pin against the original footprint.
What is the best drop-in replacement for KSZ8873RLLI-TR?
KSZ8873MLLI is the closest identified same-family candidate because it appears in a direct comparison with KSZ8873RLLI-TR and belongs to the manufacturer’s KSZ8873 line. A drop-in conclusion still requires confirmation of LQFP-48 pin compatibility, electrical limits, temperature grade, and configuration behavior. Only one distinct same-package family candidate was documented, so additional alternatives are not presented as validated replacements.
Is KSZ8873RLLI-TR the same as KSZ8873FLLI?
KSZ8873RLLI-TR and KSZ8873FLLI are members of the same KSZ8873 product family, but the suffix may identify a different package or ordering configuration. The manufacturer page lists FLL, FLLI, RLL, and RLLI alongside the MLL variants. Compare the exact package outline, pin names, temperature range, and ordering codes in the manufacturer datasheet before treating either part as interchangeable.
Where can I buy KSZ8873RLLI-TR online?
Use the Request a Quote form on this page to request KSZ8873RLLI-TR pricing, current inventory status, minimum order quantity, and lead time. Quote requests consolidate the exact MPN and package code into one purchasing request. The live Request a Quote workflow is preferable to static listing text because component availability and commercial terms can change.
What is the lead time and stock status for KSZ8873RLLI-TR?
The KSZ8873RLLI-TR is listed as active, but current stock and production lead time should be confirmed through the Request a Quote form on this page. Provide the exact MPN KSZ8873RLLI-TR, the required quantity, and any required traceable-assurance terms. The manufacturer identifies the part as active, which distinguishes lifecycle status from immediate inventory availability.
What is the price of KSZ8873RLLI-TR?
Submit a KSZ8873RLLI-TR request through the Request a Quote form on this page to obtain the current unit and volume pricing. The form preserves the exact MPN and requested quantity, allowing purchasing to confirm quantity breaks, currency, delivery schedule, and shipping terms. Pricing is handled through the live quotation workflow rather than static product-page text.

Mühendislik referans verileri: KSZ8873RLLI-TR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose KSZ8873RLLI-TR for a compact three-port 10/100 Mbps Ethernet design that needs integrated Base-T/TX PHYs, managed-switch functions, and a combination of I2C, SPI, or RMII connectivity. It is especially attractive when board area and component count matter more than gigabit performance. KSZ8873MLLI is the closest identified same-family candidate for an existing LQFP-48 design, but ordering-code, temperature-grade, and pin assignments must be checked before replacement. Do not use a KSZ8863-family device or an FLL-series ordering code as a direct substitute without a complete electrical and pin-compatibility review. For systems requiring port speeds above 100 Mbps, substantially more ports, or different media interfaces, select a switch platform explicitly designed for those requirements rather than treating this device as a functional equivalent.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün KSZ8873MLLI
Brand Microchip Technology Microchip Technology
Package LQFP-48 LQFP-48
Product Type Integrated 3-port managed Ethernet switch Integrated 3-port managed Ethernet switch
Ethernet Port Count 3 ports 3 ports
Supported Data Rate 10/100 Mbps 10/100 Mbps
Physical Layer 10/100 Base-T/TX PHY 10/100 Base-T/TX PHY
Host Control Interfaces I2C and SPI I2C and SPI
Processor Interface RMII RMII
Supply Voltage Options 1.8 V, 2.5 V, and 3.3 V 1.8 V, 2.5 V, and 3.3 V
Typical Supply Current 115 mA 115 mA
Operating Temperature -40°C to +85°C -40°C to +85°C
Lifecycle Status Active Active family variant

Ana Farklılayıcılar

  • Three integrated PHYs in one switching IC (karşılaştırma:KSZ8873MLLI)
  • Mixed-voltage host integration (karşılaştırma:KSZ8873MLLI)
  • Compact managed-switch integration (karşılaştırma:KSZ8873MLLI)

Tasarım Notları

Place the KSZ8873RLLI-TR close to the three Ethernet channels and provide a continuous ground reference beneath the LQFP-48 package. Route each 100BASE-TX differential pair as a controlled-impedance pair with closely matched length and via geometry. Keep switching-node and magnetics return paths away from RMII traces so that Ethernet return current does not become common-mode noise on the host interface.

Design separate 1.8 V, 2.5 V, and 3.3 V supply paths according to the manufacturer application circuit, using local high-frequency bypass capacitance at the device pins and adequate bulk capacitance near the power entry point. Confirm rail tolerance, startup sequence, and maximum supply limits against the KSZ8873 datasheet. The 115 mA figure is a typical operating value and should be supplemented with worst-case current from the datasheet for power-supply sizing.

Treat RMII as a timing-sensitive interface. Route RMII clock and data using the topology recommended in the manufacturer datasheet, minimize stubs, and avoid running these signals across plane splits. Place decoupling and return-path structures so switching-node energy is not injected into the RMII reference. Validate the completed layout with the intended magnetics, connector, stack-up, and operating host clock before production release.

Do not substitute an MLL, FLL, RLL, or corresponding I suffix solely because the numbers appear in the same product family. Verify package dimensions, pin assignments, temperature grade, tape-and-reel requirements, and active ordering codes. Similarly, the integrated PHYs do not replace Ethernet magnetics, center-tap capacitors, connector design, or the controlled-impedance layout required by a compliant 10/100BASE-TX interface.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance status was not explicitly stated for the exact MPN. The family comparison page mentions RoHS and REAH attributes, but no definitive status was extracted. AEC-Q100 qualification is not established by the available information.

İlgili Aramalar

KSZ8873RLLI-TR datasheet KSZ8873RLLI-TR pinout KSZ8873RLLI-TR datasheet pdf KSZ8873RLLI-TR schematic KSZ8873RLLI-TR equivalent KSZ8873RLLI-TR replacement KSZ8873RLLI-TR cross reference KSZ8873RLLI-TR vs KSZ8873MLLI KSZ8873RLLI-TR LQFP-48 footprint KSZ8873RLLI-TR application circuit KSZ8873RLLI-TR price KSZ8873RLLI-TR stock Microchip KSZ8873RLLI-TR

İlgili Bileşenler ve Terimler

Microchip Technology KSZ8873RLLI-TR KSZ8873MLLI KSZ8873 managed Ethernet switch Ethernet switch 10/100 Base-T/TX PHY 10/100 Mbps Ethernet physical-layer interface I2C SPI RMII LQFP-48 LQFP package family surface-mount package 1.8 V power supply 2.5 V power supply 3.3 V power supply 115 mA supply current industrial Ethernet embedded control system IoT gateway network appliance Ethernet magnetics
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle