KSZ8873RLLI-TR - 3-Port 10/100 Ethernet Switch | Microchip (Tape & Reel)
MPN: KSZ8873RLLI-TR ✓ 啟用中KSZ8873RLLI-TR 概覽
An integrated managed Ethernet switch connects multiple physical-layer ports through one switching engine, reducing the need for discrete PHYs, magnetics interfaces, and separate switch controllers. The KSZ8873 series is positioned for low-port-count, power-efficient 10/100 Mbps networks where three integrated PHYs provide a compact bridge between copper Ethernet interfaces and a host processor or embedded control system.
Key features include three integrated 10/100 Ethernet ports, operation at up to 100 Mbps, a typical 115 mA supply current, and support for 1.8 V, 2.5 V, or 3.3 V supply levels. The combination of I2C and SPI host interfaces supports configuration access from embedded processors, while the RMII interface provides a dedicated connection to a network controller. The LQFP-48 package supports conventional surface-mount assembly and thermal copper-area integration.
The device uses a mixed 1.8 V, 2.5 V, and 3.3 V supply architecture, allowing system designers to align core and interface voltage domains. A 115 mA typical operating current is particularly useful for compact embedded platforms where the Ethernet function must coexist with power-limited processors and sensors. The three integrated PHYs also reduce board area by consolidating three copper-network interface sections into one switching IC.
Typical applications include industrial Ethernet gateways, embedded control systems, set-top and network appliances, instrumentation platforms, and low-cost Ethernet bridges. The switch is especially useful when a board needs several 10/100 ports but a higher-speed multi-gigabit switching architecture would add unnecessary cost, power, and complexity.
Designers should account for the specified operating temperature of -40°C to +85°C and verify every power rail against the manufacturer's recommended sequencing and decoupling requirements. Ethernet magnetics, center-tap capacitors, impedance-controlled differential pairs, and connector layout remain essential even when the PHY and switch functions are integrated into one package.
This product overview combines port, interface, voltage, packaging, and lifecycle information with application guidance and engineering selection notes. It also identifies the strength and limitations of available drop-in alternatives, helping engineers validate footprint compatibility, operating conditions, and host-interface requirements before making a PCB or sourcing decision.
直接替換替代品,適用於 KSZ8873RLLI-TR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: KSZ8873RLLI-TR (相同外形與佔位) — 差異在於 Integrated PHYs, Product Type, Supply Voltage Options.
KSZ8873MLLI
✅ 直接替換聯絡詢價
查看資料表 →KSZ8873RLLI-TR 最大額定值與電氣特性
| Product Type | Integrated 3-port managed Ethernet switch with PHYs |
| Number of Ethernet Ports | 3 ports |
| Ethernet Data Rate | 10/100 Mbps |
| Physical Layer Standard | 10/100 Base-T/TX PHY |
| Host Control Interfaces | I2C and SPI |
| Processor Interface | RMII |
| Supply Voltage Options | 1.8 V, 2.5 V, and 3.3 V |
| Typical Supply Current | 115 mA |
| 工作溫度 | -40°C to +85°C |
| 封裝 | LQFP-48 |
| 安裝類型 | Surface mount |
| Part Status | Active |
| Integrated PHYs | 3 integrated PHYs |
| Switch Port Count | 3-port switch-on-chip |
KSZ8873RLLI-TR lqfp-48 腳位配置指南
KSZ8873RLLI-TR(lqfp-48 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: KSZ8873RLLI-TR.
請參閱 資料表 以查看完整腳位配置。
典型應用
KSZ8873RLLI-TR 適用於 6 應用s: Industrial Ethernet Gateway, Embedded Control System, Network Appliance, Instrumentation Platform, Set-Top Networking, IoT Gateway.
Industrial Ethernet Gateway
The KSZ8873RLLI-TR fits an industrial gateway that must consolidate three 10/100 Mbps copper links into one embedded controller. Its three integrated PHYs reduce the number of separate Ethernet interface devices, while I2C or SPI can provide configuration access and RMII can carry network traffic. The -40°C to +85°C operating range is appropriate for equipment positioned between controlled indoor electronics and harsher industrial environments. Designers should still implement the required Ethernet magnetics, center-tap network components, and controlled differential routing. The 115 mA typical supply current also allows the switching subsystem to be budgeted alongside an embedded processor and communication transceivers.
推薦
Embedded Control System
The KSZ8873RLLI-TR is suitable for an embedded controller that needs to expose several 10/100 Ethernet connections without allocating several discrete PHY packages. A microcontroller can use I2C or SPI for switch configuration, while a network-capable processor connects through RMII for data transfer. Operating from 1.8 V, 2.5 V, or 3.3 V supply options helps align the switch with mixed-voltage embedded platforms. The key layout consideration is keeping the RMII clock and data signals away from Ethernet magnetics and switching-node return currents, because adjacent high-current copper interfaces can degrade signal integrity.
推薦
Network Appliance
A compact network appliance can use the KSZ8873RLLI-TR to provide three 10/100 Mbps switched ports for service modules, management interfaces, or downstream equipment. Integrating the PHYs and switch into one LQFP-48 device supports a small-footprint design while avoiding the area and power cost of three unrelated PHY implementations. The 115 mA typical current provides a useful starting point for system power budgeting, while the three supported supply levels support both legacy 2.5 V and 3.3 V interface domains. Product developers should validate connector creepage, isolation requirements, and thermal performance at the highest expected port activity before release.
推薦
Instrumentation Platform
The KSZ8873RLLI-TR can serve instrumentation equipment that combines measurement electronics, a local controller, and Ethernet connectivity. Three integrated 10/100 ports can connect a service interface, a host computer, and remote test equipment while preserving a common switching function. The -40°C to +85°C range supports industrial bench and field equipment, and the low-port-count focus avoids the complexity of a larger switching ASIC. Precision analog and timing circuitry should be separated from Ethernet magnetics and high-di/dt power paths, while the switch’s supply rails should be filtered according to the manufacturer’s recommended application circuit.
推薦
Set-Top Networking
In a compact set-top or network endpoint, the KSZ8873RLLI-TR can provide local 10/100 Ethernet service ports alongside another embedded network interface. Its three integrated PHYs and 115 mA typical current are appropriate for a low-port-count, cost-sensitive design where a larger Ethernet switch would add unnecessary board area. Configuration through I2C or SPI permits firmware-driven setup of the managed switching functions. The board should use a solid ground reference beneath the LQFP-48 device and short supply connections so switching-node energy does not couple into the host processor or sensitive RF and audio circuitry.
推薦
IoT Gateway
The KSZ8873RLLI-TR fits an IoT gateway that bridges several 10/100 Mbps Ethernet devices to an embedded host. Three integrated PHYs reduce board-level component count, and I2C or SPI supports centralized configuration of the managed switching function. The 1.8 V, 2.5 V, and 3.3 V supply options support common embedded voltage domains, while the -40°C to +85°C range suits industrial IoT equipment. Placement should prioritize a continuous ground plane and short RMII routing. Magnetic-component selection and copper Ethernet channel design remain essential because the integrated PHY does not replace transformer isolation or controlled-impedance PCB construction.
推薦
推薦產品摘要
工程參考資料,適用於 KSZ8873RLLI-TR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | KSZ8873MLLI |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | LQFP-48 | LQFP-48 |
| Product Type | Integrated 3-port managed Ethernet switch | Integrated 3-port managed Ethernet switch |
| Ethernet Port Count | 3 ports | 3 ports |
| Supported Data Rate | 10/100 Mbps | 10/100 Mbps |
| Physical Layer | 10/100 Base-T/TX PHY | 10/100 Base-T/TX PHY |
| Host Control Interfaces | I2C and SPI | I2C and SPI |
| Processor Interface | RMII | RMII |
| Supply Voltage Options | 1.8 V, 2.5 V, and 3.3 V | 1.8 V, 2.5 V, and 3.3 V |
| Typical Supply Current | 115 mA | 115 mA |
| Operating Temperature | -40°C to +85°C | -40°C to +85°C |
| Lifecycle Status | Active | Active family variant |
主要差異化特點
- Three integrated PHYs in one switching IC (對比KSZ8873MLLI)
- Mixed-voltage host integration (對比KSZ8873MLLI)
- Compact managed-switch integration (對比KSZ8873MLLI)
設計說明
Place the KSZ8873RLLI-TR close to the three Ethernet channels and provide a continuous ground reference beneath the LQFP-48 package. Route each 100BASE-TX differential pair as a controlled-impedance pair with closely matched length and via geometry. Keep switching-node and magnetics return paths away from RMII traces so that Ethernet return current does not become common-mode noise on the host interface.
Design separate 1.8 V, 2.5 V, and 3.3 V supply paths according to the manufacturer application circuit, using local high-frequency bypass capacitance at the device pins and adequate bulk capacitance near the power entry point. Confirm rail tolerance, startup sequence, and maximum supply limits against the KSZ8873 datasheet. The 115 mA figure is a typical operating value and should be supplemented with worst-case current from the datasheet for power-supply sizing.
Treat RMII as a timing-sensitive interface. Route RMII clock and data using the topology recommended in the manufacturer datasheet, minimize stubs, and avoid running these signals across plane splits. Place decoupling and return-path structures so switching-node energy is not injected into the RMII reference. Validate the completed layout with the intended magnetics, connector, stack-up, and operating host clock before production release.
Do not substitute an MLL, FLL, RLL, or corresponding I suffix solely because the numbers appear in the same product family. Verify package dimensions, pin assignments, temperature grade, tape-and-reel requirements, and active ordering codes. Similarly, the integrated PHYs do not replace Ethernet magnetics, center-tap capacitors, connector design, or the controlled-impedance layout required by a compliant 10/100BASE-TX interface.
合規資訊
Compliance status was not explicitly stated for the exact MPN. The family comparison page mentions RoHS and REAH attributes, but no definitive status was extracted. AEC-Q100 qualification is not established by the available information.