LAN91C113-NE - 10/100 Ethernet MAC PHY | SMSC
MPN: LAN91C113-NE ✓ AktifLAN91C113-NE Genel Bakış
An Ethernet MAC is the controller that manages frame transmission and reception between a host processor and the physical network medium. The PHY converts digital data into the electrical signaling required by 10Base-T and 100Base-TX Ethernet. Integrating both functions in one IC gives embedded designers a single network interface component that connects to a host system through a parallel interface and uses standard Ethernet magnetics and cabling for the physical network connection.
The LAN91C113-NE is positioned for designs requiring 10/100 Ethernet connectivity rather than gigabit Ethernet. It can support industrial controllers, embedded gateways, print servers, set-top equipment, test instruments, and other network-enabled products. Because the MAC and PHY are combined, board designers can reduce the number of separate network-interface ICs and simplify the relationship between software control, packet handling, and physical-layer signaling.
In a typical embedded design, the host processor connects to the LAN91C113-NE for frame exchange, while the Ethernet PHY section connects through the required external network interface components. The device is intended for 10Base-T and 100Base-TX links, making it appropriate for legacy and cost-sensitive Ethernet installations where 100 Mbit/s operation is sufficient. Software drivers and host-side configuration are necessary to initialize the controller and manage Ethernet traffic.
The principal engineering consideration is interface and system integration. The design must provide the correct power rails, decoupling, clocking, reset behavior, host-bus connections, and Ethernet magnetic interface required by the selected board architecture. Pin assignment, voltage levels, timing, and exposed-package details should be confirmed against the manufacturer datasheet before the PCB footprint is released.
LAN91C113-NE is a practical choice when an embedded product needs a dedicated 10/100 Ethernet MAC-PHY with a parallel host interface in a surface-mount package. Its value comes from combining controller and transceiver functions, reducing board complexity while retaining support for both 10Base-T and 100Base-TX network operation.
This product summary combines the manufacturer product information and distributor references for the LAN91C113-NE. The Request a Quote form on this page is the appropriate route for current commercial availability, pricing, and delivery information.
Drop-in alternatifler için LAN91C113-NE — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller LAN91C113-NE (aynı form faktörü ve ayağa oturma) — farklı olan Host Interface, Package, Product Type.
LAN91C113-NU
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LAN91C113
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LAN91C113-NE Özellikler
| Product Type | 10/100 Ethernet MAC and PHY |
| Ethernet Speed Support | 10/100 Mbit/s |
| Supported Ethernet Modes | 10Base-T and 100Base-TX |
| MAC Function | Integrated Ethernet Media Access Controller |
| PHY Function | Integrated Ethernet physical-layer transceiver |
| Host Interface | Parallel interface |
| Paket | 128-lead TQFP, 14 x 14 mm |
| Montaj Türü | Surface mount |
| Application Category | Embedded Ethernet networking |
| Target Applications | 10Base-T and 100Base-TX Ethernet equipment |
| Manufacturer | SMSC |
| Product Number | LAN91C113-NE |
LAN91C113-NE 128-lead tqfp, 14 x 14 mm Pin Yapısı Kılavuzu
LAN91C113-NE (128-lead tqfp, 14 x 14 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: LAN91C113-NE.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
LAN91C113-NE için uygundur 6 uygulamas: Industrial Ethernet Gateway, Embedded Network Print Server, Set-Top Box Network Port, Test and Measurement Instrument, Embedded Telemetry Terminal, IoT Network Adapter.
Industrial Ethernet Gateway
The LAN91C113-NE fits an industrial Ethernet gateway that needs 10/100 Mbit/s connectivity and a dedicated MAC-PHY function. Its integrated architecture reduces the number of network-interface ICs required on the board, while the parallel host interface gives an embedded controller a direct path for frame handling. The device is appropriate for gateways that use 10Base-T or 100Base-TX rather than gigabit Ethernet. Designers should verify operating-temperature requirements, power-rail sequencing, Ethernet magnetics, and isolation at the product level before using the part in an industrial enclosure.
Önerilen
Embedded Network Print Server
A print server can use the LAN91C113-NE when its embedded host only requires 10/100 Ethernet. The integrated MAC and PHY reduce the controller footprint and simplify the interface between the host processor and the physical Ethernet network. The 10Base-T and 100Base-TX support covers common office and industrial network segments, while the parallel interface allows the host software to manage print jobs and network traffic through the LAN91C113-NE. Final board design must include the required Ethernet magnetic interface, power conditioning, reset, and clocking arrangements.
Önerilen
Set-Top Box Network Port
The LAN91C113-NE is suitable for a set-top box or similar consumer network terminal that needs a compact 10/100 Ethernet connection. Its integrated MAC and PHY allow the design to avoid separate controller and transceiver ICs, helping reduce board area and assembly complexity. The supported 10Base-T and 100Base-TX modes provide compatibility with existing home and commercial Ethernet networks. The host processor must support the parallel interface and the required driver configuration, while the PCB must preserve clean separation between host digital signals and the Ethernet magnetics interface.
Önerilen
Test and Measurement Instrument
Test and measurement instruments can use the LAN91C113-NE for a dedicated 10/100 Ethernet management or data link. The device provides the MAC and physical-layer functions in one integrated solution, reducing the number of network-related components in a control board. The parallel interface is useful when the instrument’s main processor already handles protocol traffic through a host bus. Because the device is limited to 10/100 Ethernet classes, it is most appropriate for management traffic, configuration links, and moderate-rate data transfer rather than gigabit streaming applications.
Önerilen
Embedded Telemetry Terminal
The LAN91C113-NE can support an embedded telemetry terminal that sends operational data over 10/100 Ethernet. Its integrated MAC and PHY simplify the network path between a telemetry processor and an Ethernet infrastructure, while 10Base-T and 100Base-TX support allows selection according to the available network speed. The device can be used in remote monitoring equipment, building controls, and unattended data-collection systems where a compact surface-mount network interface is valuable. Engineers should validate the temperature range, power behavior, isolation strategy, and host-driver requirements for the deployed environment.
Önerilen
IoT Network Adapter
The LAN91C113-NE is appropriate for an IoT network adapter that bridges an embedded host to 10/100 Ethernet. Combining the MAC and PHY reduces the number of discrete network components and can simplify enclosure and PCB planning. The adapter can support device management, telemetry, and control traffic across 10Base-T or 100Base-TX links. A practical implementation still needs host-driver support, Ethernet magnetics, suitable decoupling, and careful routing of the parallel host interface. For products requiring more than 100 Mbit/s, a gigabit Ethernet controller should be considered instead.
Önerilen
Mühendislik referans verileri: LAN91C113-NE — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Package | 128-lead TQFP, 14 x 14 mm |
| Brand | SMSC |
| Ethernet Speed | 10/100 Mbit/s |
| Supported Modes | 10Base-T and 100Base-TX |
| MAC Function | Integrated 10/100 Ethernet MAC |
| PHY Function | Integrated Ethernet PHY |
| Host Interface | Parallel interface |
| Application Category | Embedded Ethernet networking |
Ana Farklılayıcılar
- Integrated MAC and PHY architecture (karşılaştırma:Separate MAC and PHY implementations)
- Parallel host integration (karşılaştırma:Ethernet controllers with serial host interfaces)
- Compact surface-mount implementation (karşılaştırma:Larger multi-chip Ethernet implementations)
Tasarım Notları
Route the parallel host interface away from the Ethernet magnetics and physical-layer section to reduce coupling between high-speed digital edges and analog network signaling. Keep the controller supply connections and decoupling network close to the device. The complete signal-pin assignments, reference design, and recommended component values should be taken from the manufacturer datasheet before PCB release.
Do not treat LAN91C113-NE as a gigabit Ethernet controller: the device is identified for 10/100 Mbit/s and 10Base-T or 100Base-TX operation. Also avoid assuming that any LAN91C113 suffix is automatically interchangeable. Confirm the exact ordering code, package, temperature range, host interface, and electrical limits for the selected variant before designing it into a replacement board.
Confirm the device power rails and sequencing requirements against the manufacturer datasheet. Place local bypass capacitors at the supply and ground pins with short return paths, and provide clean grounding for the MAC-PHY and external Ethernet interface. Verify the power budget at the system level, including the controller and the external Ethernet magnetic-interface components.
Uyumluluk Bilgisi
The available product information does not state the required compliance status for the exact LAN91C113-NE ordering code. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation or a declaration.