SMSC Corporation

LAN91C113-NE - 10/100 Ethernet MAC PHY | SMSC

MPN: LAN91C113-NE ✓ פעיל
128-lead TQFP, 14 x 14 mm Package 10/100 Mbit/s Speed
כמות הזמנה מינימלית: 1 |

LAN91C113-NE סקירה

The SMSC LAN91C113-NE is a highly integrated 10/100 Ethernet MAC and PHY solution for embedded networking, with support for 10Base-T and 100Base-TX Ethernet applications. It combines a 10/100 Ethernet Media Access Controller with a physical-layer transceiver in one device, reducing the component count and simplifying the hardware architecture of embedded network equipment. The LAN91C113-NE is associated with a 128-lead TQFP package configuration for compact surface-mount PCB designs.

An Ethernet MAC is the controller that manages frame transmission and reception between a host processor and the physical network medium. The PHY converts digital data into the electrical signaling required by 10Base-T and 100Base-TX Ethernet. Integrating both functions in one IC gives embedded designers a single network interface component that connects to a host system through a parallel interface and uses standard Ethernet magnetics and cabling for the physical network connection.

The LAN91C113-NE is positioned for designs requiring 10/100 Ethernet connectivity rather than gigabit Ethernet. It can support industrial controllers, embedded gateways, print servers, set-top equipment, test instruments, and other network-enabled products. Because the MAC and PHY are combined, board designers can reduce the number of separate network-interface ICs and simplify the relationship between software control, packet handling, and physical-layer signaling.

In a typical embedded design, the host processor connects to the LAN91C113-NE for frame exchange, while the Ethernet PHY section connects through the required external network interface components. The device is intended for 10Base-T and 100Base-TX links, making it appropriate for legacy and cost-sensitive Ethernet installations where 100 Mbit/s operation is sufficient. Software drivers and host-side configuration are necessary to initialize the controller and manage Ethernet traffic.

The principal engineering consideration is interface and system integration. The design must provide the correct power rails, decoupling, clocking, reset behavior, host-bus connections, and Ethernet magnetic interface required by the selected board architecture. Pin assignment, voltage levels, timing, and exposed-package details should be confirmed against the manufacturer datasheet before the PCB footprint is released.

LAN91C113-NE is a practical choice when an embedded product needs a dedicated 10/100 Ethernet MAC-PHY with a parallel host interface in a surface-mount package. Its value comes from combining controller and transceiver functions, reducing board complexity while retaining support for both 10Base-T and 100Base-TX network operation.

This product summary combines the manufacturer product information and distributor references for the LAN91C113-NE. The Request a Quote form on this page is the appropriate route for current commercial availability, pricing, and delivery information.

חלופות תחליף ישיר עבור LAN91C113-NE — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LAN91C113-NE (אותו גורם צורה וטביעת רגל) — שונים ב Host Interface, Package, Product Type.

Microchip Technology
Host Interface: 16-bit parallel MII
Package: 128-pin TQFP, 14 x 14 mm
Product Type: 10/100 Ethernet single-chip MAC and PHY controller
השווה עם LAN91C113-NE →

LAN91C113-NU

✅ Drop-In
Microchip Technology
📦 128-lead TQFP (14 x 14 mm)
10/100 Ethernet single-chip MAC and PHY controller · 10/100 Mb/s · 10Base-T and 100Base-TX · 16-bit parallel MII · Non-PCI parallel interface · 3.3 V · 128-pin TQFP, 14 x 14 mm · 128 pins

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LAN91C113

✅ Drop-In
📦 128-lead TQFP
Same LAN91C113 family and 10/100 MAC/PHY function; ordering suffix and production configuration must be matched before substitution.

📋 חלופה להתייחסות (לא בקטלוג)

LAN91C113-NE מפרטים

Product Type 10/100 Ethernet MAC and PHY
Ethernet Speed Support 10/100 Mbit/s
Supported Ethernet Modes 10Base-T and 100Base-TX
MAC Function Integrated Ethernet Media Access Controller
PHY Function Integrated Ethernet physical-layer transceiver
Host Interface Parallel interface
מארז 128-lead TQFP, 14 x 14 mm
סוג הרכבה Surface mount
Application Category Embedded Ethernet networking
Target Applications 10Base-T and 100Base-TX Ethernet equipment
Manufacturer SMSC
Product Number LAN91C113-NE

מדריך תצורת פינים של LAN91C113-NE 128-lead tqfp, 14 x 14 mm

תצורת פינים עבור LAN91C113-NE (מארזת 128-lead tqfp, 14 x 14 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 128-lead tqfp, 14 x 14 mm עבור LAN91C113-NE

אין נתוני פריסת פינים מפורטים עבור LAN91C113-NE.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LAN91C113-NE מתאים עבור 6 יישוםs: Industrial Ethernet Gateway, Embedded Network Print Server, Set-Top Box Network Port, Test and Measurement Instrument, Embedded Telemetry Terminal, IoT Network Adapter.

🏭

Industrial Ethernet Gateway

The LAN91C113-NE fits an industrial Ethernet gateway that needs 10/100 Mbit/s connectivity and a dedicated MAC-PHY function. Its integrated architecture reduces the number of network-interface ICs required on the board, while the parallel host interface gives an embedded controller a direct path for frame handling. The device is appropriate for gateways that use 10Base-T or 100Base-TX rather than gigabit Ethernet. Designers should verify operating-temperature requirements, power-rail sequencing, Ethernet magnetics, and isolation at the product level before using the part in an industrial enclosure.

🖥️

Embedded Network Print Server

A print server can use the LAN91C113-NE when its embedded host only requires 10/100 Ethernet. The integrated MAC and PHY reduce the controller footprint and simplify the interface between the host processor and the physical Ethernet network. The 10Base-T and 100Base-TX support covers common office and industrial network segments, while the parallel interface allows the host software to manage print jobs and network traffic through the LAN91C113-NE. Final board design must include the required Ethernet magnetic interface, power conditioning, reset, and clocking arrangements.

📺

Set-Top Box Network Port

The LAN91C113-NE is suitable for a set-top box or similar consumer network terminal that needs a compact 10/100 Ethernet connection. Its integrated MAC and PHY allow the design to avoid separate controller and transceiver ICs, helping reduce board area and assembly complexity. The supported 10Base-T and 100Base-TX modes provide compatibility with existing home and commercial Ethernet networks. The host processor must support the parallel interface and the required driver configuration, while the PCB must preserve clean separation between host digital signals and the Ethernet magnetics interface.

🔧

Test and Measurement Instrument

Test and measurement instruments can use the LAN91C113-NE for a dedicated 10/100 Ethernet management or data link. The device provides the MAC and physical-layer functions in one integrated solution, reducing the number of network-related components in a control board. The parallel interface is useful when the instrument’s main processor already handles protocol traffic through a host bus. Because the device is limited to 10/100 Ethernet classes, it is most appropriate for management traffic, configuration links, and moderate-rate data transfer rather than gigabit streaming applications.

🌐

Embedded Telemetry Terminal

The LAN91C113-NE can support an embedded telemetry terminal that sends operational data over 10/100 Ethernet. Its integrated MAC and PHY simplify the network path between a telemetry processor and an Ethernet infrastructure, while 10Base-T and 100Base-TX support allows selection according to the available network speed. The device can be used in remote monitoring equipment, building controls, and unattended data-collection systems where a compact surface-mount network interface is valuable. Engineers should validate the temperature range, power behavior, isolation strategy, and host-driver requirements for the deployed environment.

🧩

IoT Network Adapter

The LAN91C113-NE is appropriate for an IoT network adapter that bridges an embedded host to 10/100 Ethernet. Combining the MAC and PHY reduces the number of discrete network components and can simplify enclosure and PCB planning. The adapter can support device management, telemetry, and control traffic across 10Base-T or 100Base-TX links. A practical implementation still needs host-driver support, Ethernet magnetics, suitable decoupling, and careful routing of the parallel host interface. For products requiring more than 100 Mbit/s, a gigabit Ethernet controller should be considered instead.

What is the LAN91C113-NE?
The LAN91C113-NE is a highly integrated 10/100 Ethernet MAC and PHY solution from SMSC. It supports 10Base-T and 100Base-TX Ethernet applications and combines the Media Access Controller with the physical-layer transceiver in one device. According to the manufacturer product information, this integration reduces board component count and simplifies embedded network connectivity.
What Ethernet speeds does LAN91C113-NE support?
The LAN91C113-NE supports 10 Mbit/s and 100 Mbit/s Ethernet operation. The manufacturer identifies the device for 10Base-T and 100Base-TX applications, making it suitable for embedded systems that do not require gigabit Ethernet. The supported link speeds are determined by the network configuration and the connected Ethernet infrastructure.
Where can I download the LAN91C113-NE datasheet?
The manufacturer product page for LAN91C113 is available at https://www.microchip.com/en-us/product/LAN91C113. It provides the official product documentation and technical resources for the device. For a new design, use the manufacturer datasheet to verify pin assignments, electrical limits, interface timing, and package drawings before committing the PCB layout.
What is the LAN91C113-NE pinout?
The LAN91C113-NE pinout must be taken from the manufacturer datasheet because the public product information does not provide a complete numbered pin description. The package information identifies a 128-lead TQFP configuration. Do not infer unused pins or host-bus assignments from a generic Ethernet controller pinout; verify every connection against the device documentation.
Can LAN91C113-NE be used for industrial embedded networking?
The LAN91C113-NE can be used in embedded Ethernet products requiring 10/100 Mbit/s connectivity, including industrial controllers and gateways. The device integrates the MAC and PHY and supports 10Base-T and 100Base-TX. Final suitability depends on the required operating temperature, power rails, regulatory environment, and system-level Ethernet design.
Does LAN91C113-NE include both the MAC and PHY?
Yes, the LAN91C113-NE includes both the 10/100 Ethernet MAC and the physical-layer transceiver. This integrated architecture lets an embedded processor connect to the network interface without using separate Ethernet MAC and PHY devices. According to the manufacturer description, integration reduces component count and simplifies board design for 10Base-T and 100Base-TX equipment.
What is the difference between LAN91C113-NE and LAN91C113-NU?
LAN91C113-NE and LAN91C113-NU are both listed for the LAN91C113 family, with LAN91C113-NU identified as an Ethernet controller with a 10/100 Base-T/TX PHY and a 128-TQFP package. The suffix distinction must be checked against the manufacturer ordering information, package details, and datasheet before using one as a replacement for the other.
Where can I buy LAN91C113-NE online?
Use the Request a Quote form on this page to request the current LAN91C113-NE quote, availability, and delivery information. The product is associated with SMSC and is offered through multiple distribution channels, but current commercial conditions should be confirmed through the page's quote workflow rather than from a static listing.
What is the price of LAN91C113-NE?
The current price of LAN91C113-NE is not stated here because commercial pricing changes with quantity, package configuration, and market conditions. Submit a request through the Request a Quote form on this page for current pricing and quantity-break information for the exact LAN91C113-NE ordering code.
What is the lead time for LAN91C113-NE?
The current lead time for LAN91C113-NE should be requested through the Request a Quote form on this page. Lead time can depend on the requested quantity, package code, and current inventory position. Confirm the delivery schedule and minimum order quantity when placing the request rather than relying on a historical listing.
Is LAN91C113-NE in stock?
Stock status should be confirmed through the Request a Quote form on this page for the exact LAN91C113-NE ordering code. A distributor listing can show a general product association without guaranteeing current inventory for a particular quantity. The quote response will provide the appropriate supply information.
When should I choose LAN91C113-NE over another Ethernet controller?
Choose LAN91C113-NE when an embedded design needs an integrated 10/100 Ethernet MAC and PHY, a parallel host interface, and a 128-lead TQFP footprint. It is especially appropriate when reducing component count is valuable and the system only needs 10Base-T or 100Base-TX rather than gigabit Ethernet. Verify package, electrical, timing, and lifecycle requirements before selecting a substitute.
Is LAN91C113-NE suitable for a 100Base-TX industrial gateway?
The LAN91C113-NE is suitable in principle for a 100Base-TX gateway because it supports 100/100Base-TX operation and integrates the MAC and PHY. The complete design must still address temperature, power supply, isolation, magnetics, reset, clocking, host-bus timing, and regulatory requirements. Those system-level checks determine production suitability.
What is the best drop-in replacement for LAN91C113-NE?
No verified drop-in replacement is identified in the available cross-reference information for LAN91C113-NE. A replacement should not be selected by function alone: it must match the 128-lead TQFP footprint, parallel host interface, electrical characteristics, timing, and Ethernet requirements. Use the Request a Quote form to discuss an approved alternate with the sourcing team.
Can another manufacturer replace LAN91C113-NE?
A cross-manufacturer replacement cannot be confirmed from the available information. The documented part is an SMSC 10/100 Ethernet MAC-PHY in a 128-lead TQFP package, and a valid substitute must preserve pin compatibility, electrical behavior, timing, and system requirements. Do not install a functionally similar Ethernet IC unless the manufacturer or a qualified engineering review confirms the footprint and interface compatibility.
What are the key specifications of LAN91C113-NE that engineers should know?
The key LAN91C113-NE specifications are its integrated 10/100 Ethernet MAC and PHY, support for 10Base-T and 100Base-TX, parallel host interface, and 128-lead TQFP package. The manufacturer describes the device as a single-chip solution that reduces component count. Electrical limits, temperature range, I/O levels, and timing remain subject to the official datasheet.

נתוני עזר הנדסיים עבור LAN91C113-NE — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the LAN91C113-NE when an embedded system requires a 10/100 Ethernet MAC and PHY, a parallel host interface, and a 128-lead TQFP footprint. It is a strong fit for industrial gateways, telemetry terminals, print servers, test instruments, and set-top equipment that operate on 10Base-T or 100Base-TX networks. The integrated MAC and PHY can simplify board assembly by removing the need for separate network-controller and transceiver ICs. Choose a gigabit Ethernet controller instead when throughput requirements exceed 100 Mbit/s. Do not select another part merely because it is described as an Ethernet controller; verify exact pin compatibility, electrical ratings, timing, host-bus behavior, package, temperature range, and lifecycle status. Because no verified drop-in substitute was identified for the exact LAN91C113-NE ordering code, existing designs should use the documented device or obtain a manufacturer-approved equivalent.

השוואה עם חלופות

פרמטר מוצר זה
Package 128-lead TQFP, 14 x 14 mm
Brand SMSC
Ethernet Speed 10/100 Mbit/s
Supported Modes 10Base-T and 100Base-TX
MAC Function Integrated 10/100 Ethernet MAC
PHY Function Integrated Ethernet PHY
Host Interface Parallel interface
Application Category Embedded Ethernet networking

מבדילים עיקריים

  • Integrated MAC and PHY architecture (לעומתSeparate MAC and PHY implementations)
  • Parallel host integration (לעומתEthernet controllers with serial host interfaces)
  • Compact surface-mount implementation (לעומתLarger multi-chip Ethernet implementations)

הערות תכנון

Route the parallel host interface away from the Ethernet magnetics and physical-layer section to reduce coupling between high-speed digital edges and analog network signaling. Keep the controller supply connections and decoupling network close to the device. The complete signal-pin assignments, reference design, and recommended component values should be taken from the manufacturer datasheet before PCB release.

Do not treat LAN91C113-NE as a gigabit Ethernet controller: the device is identified for 10/100 Mbit/s and 10Base-T or 100Base-TX operation. Also avoid assuming that any LAN91C113 suffix is automatically interchangeable. Confirm the exact ordering code, package, temperature range, host interface, and electrical limits for the selected variant before designing it into a replacement board.

Confirm the device power rails and sequencing requirements against the manufacturer datasheet. Place local bypass capacitors at the supply and ground pins with short return paths, and provide clean grounding for the MAC-PHY and external Ethernet interface. Verify the power budget at the system level, including the controller and the external Ethernet magnetic-interface components.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The available product information does not state the required compliance status for the exact LAN91C113-NE ordering code. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation or a declaration.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

LAN91C113-NE datasheet LAN91C113-NE datasheet pdf LAN91C113-NE pinout LAN91C113-NE specifications SMSC LAN91C113-NE LAN91C113-NE equivalent LAN91C113-NE replacement LAN91C113-NE cross reference LAN91C113-NE footprint LAN91C113-NE price LAN91C113-NE stock LAN91C113-NE 10/100 Ethernet LAN91C113-NE industrial gateway LAN91C113-NE 128 TQFP LAN91C113-NE MAC PHY

רכיבים ומונחים קשורים

SMSC Microchip Technology LAN91C113-NE LAN91C113-NU LAN91C113 Ethernet MAC Ethernet PHY 10/100 Ethernet controller 10Base-T 100Base-TX 10 Mbit/s 100 Mbit/s parallel host interface 128-lead TQFP 14 x 14 mm package surface-mount semiconductor embedded networking industrial gateway print server set-top box telemetry terminal test and measurement instrument IoT network adapter Ethernet magnetics MAC-PHY integration
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר