LFE2-6SE-6F256I - 6K LUT ECP2 FPGA, 256-BGA | Lattice
MPN: LFE2-6SE-6F256I ✓ 啟用中LFE2-6SE-6F256I 概覽
An FPGA is a reconfigurable digital semiconductor used to implement logic, state machines, interfaces, and parallel processing functions after hardware manufacture. The ECP2 family occupies the FPGA hierarchy below application-specific programmable logic and combines programmable logic blocks, embedded block RAM, programmable I/O, and dedicated serial capabilities in one highly integrated device. This makes the LFE2-6SE-6F256I suitable for embedded control, communications, industrial automation, and signal-processing systems.
The principal resources include 6,000 logic elements, 56,320 RAM bits, and 190 user I/O, while the device is identified as a 6K LUT ECP2 FPGA with S-Ser DSP support. Its -6 ordering code denotes the speed grade shown in the product listing. The 256-BGA package provides a dense board footprint for designs requiring extensive connectivity, although ball assignments, differential I/O support, and exposed-pad requirements must be confirmed against the manufacturer pinout and package documentation before layout release.
The ECP2 architecture supports parallel programmable logic, embedded memory, and high-speed serial communication resources in a single device. Designers can use the 190 available user I/O for control signals, external memory interfaces, sensor acquisition, or industrial bus connectivity where the relevant bank voltage and interface limits permit. Logic utilization depends on the selected clocking, memory, I/O standards, and routing architecture, so a design should be fitted with the Lattice implementation tools rather than estimated solely from LUT count.
Typical applications include industrial control systems, network interface modules, video and image-processing pipelines, test equipment, industrial networking, and embedded serial bridges. The device is particularly relevant when moderate logic density and a large I/O count are more important than very high FPGA capacity. It also suits designs requiring an S-Ser DSP path for serialization, clocking, or data movement.
PCB implementation should preserve the manufacturer's ball map, power architecture, decoupling requirements, and high-speed routing rules. Validate every supply rail, I/O voltage, configuration connection, and thermal condition against the exact -6F256I ordering code. When planning a migration, distinguish speed-grade, temperature-grade, package, and density changes because a shared package name alone does not establish pin-to-pin interchangeability.
This product page combines the verified ECP2 resource and package data with same-package alternatives, comparison parameters, and design guidance. It supports early architecture selection while leaving final pin assignment, timing closure, power budgeting, and board-layout approval to the manufacturer documentation and Lattice design flow.
直接替換替代品,適用於 LFE2-6SE-6F256I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LFE2-6SE-6F256I (相同外形與佔位) — 差異在於 Device Type, Package, Speed Grade.
LFE2-6SE-6FN256I
✅ 直接替換📋 參考替代品(不在目錄中)
LFE2-6E-6F256C
✅ 直接替換聯絡詢價
查看資料表 →LFE2-6SE-7FN256C
✅ 直接替換📋 參考替代品(不在目錄中)
LFE2-12SE-6F256
✅ 直接替換📋 參考替代品(不在目錄中)
LFE2-6SE-6F256C
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →LFE2-6SE-6F256I 最大額定值與電氣特性
| Device Type | ECP2 field-programmable gate array (FPGA) |
| Logic Elements | 6,000 logic elements |
| Lookup Tables | 6K LUTs |
| Embedded RAM | 56,320 RAM bits |
| User I/O Pins | 190 user I/O pins |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -6 speed grade |
| Temperature Grade | Industrial grade |
| 封裝 | 256-BGA |
| 安裝類型 | Surface mount |
| Serial Capability | S-Ser DSP |
| Programmable Logic | 6,000 logic elements |
LFE2-6SE-6F256I 256-bga 腳位配置指南
LFE2-6SE-6F256I(256-bga 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LFE2-6SE-6F256I.
請參閱 資料表 以查看完整腳位配置。
典型應用
LFE2-6SE-6F256I 適用於 6 應用s: Industrial Control and Automation, Serial Network Interface Bridge, Test and Measurement Instrumentation, Video and Image Processing, Industrial Sensor Hub, Embedded Communication Equipment.
Industrial Control and Automation
The LFE2-6SE-6F256I fits industrial controllers that combine parallel machine logic with high-speed serial data handling. Its 6,000 logic elements can implement sequencing, state-machine, timing, and protocol-control logic, while 56,320 RAM bits provide storage for buffers, counters, and sampled data. The 190 user I/O supports discrete sensors, actuators, encoders, and external interfaces when the selected bank voltage and I/O standards permit. The industrial-grade ordering option suits equipment requiring extended environmental capability. Designers should partition real-time control and serial functions carefully, apply clock constraints early, and verify timing against the -6 speed grade in the Lattice implementation flow.
推薦
Serial Network Interface Bridge
The LFE2-6SE-6F256I is appropriate for protocol-conversion and network-interface modules where parallel user logic must be combined with S-Ser DSP links. The S-Ser capability can reduce the number of physical serial links needed to move data between FPGA logic, converters, and external devices. Its 6,000 logic elements accommodate framing, error detection, flow control, and state management, while the 56,320 RAM bits support packet buffering. Pin assignment must account for the correct I/O bank and voltage for every high-speed lane. Signal-integrity validation, source-synchronous timing, and the -6 speed-grade timing report are essential before hardware release.
推薦
Test and Measurement Instrumentation
The LFE2-6SE-6F256I can implement programmable logic, acquisition control, pattern generation, and communication functions in modular test equipment. Its 6,000 logic elements support control state machines and digital algorithms, while the 190 user I/O offer broad connectivity to stimulus, response, and instrument-bus circuits. The 1.2 V core supply suits modern low-voltage digital implementations, and the industrial ordering code addresses equipment operating outside consumer-only temperature expectations. For high-accuracy analog measurements, keep sensitive front-end circuitry separate from the FPGA and use S-Ser DSP only after its clocking and interface timing have been characterized.
推薦
Video and Image Processing
The LFE2-6SE-6F256I can support compact image-acquisition and processing blocks when a design fits within 6,000 logic elements and 56,320 RAM bits. Programmable logic can implement pixel formatting, thresholding, color conversion, counters, and control sequencing, while S-Ser DSP provides a path for transferring data from cameras or converters. The 190 user I/O can connect parallel sensors, memories, and control signals. Designers should avoid treating the raw RAM total as unlimited frame storage and instead minimize line buffers where possible. Validate horizontal and vertical timing, lane mapping, clock-domain crossings, and video output timing in the final implementation.
推薦
Industrial Sensor Hub
The LFE2-6SE-6F256I fits sensor-hub designs that gather parallel digital inputs, perform local filtering or classification, and communicate results through serial links. Its 190 user I/O permits direct connection to multiple digital sensors, switches, and counters, while 6,000 logic elements can implement acquisition control and local decision logic. The 56,320 RAM bits are useful for sample buffering and transfer staging. A practical design should group compatible voltage standards into the appropriate I/O banks and preserve isolation between noisy industrial inputs and precision processing. Configuration, watchdog, and error-reporting behavior also need verification for unattended operation.
推薦
Embedded Communication Equipment
The LFE2-6SE-6F256I is suitable for compact communication modules that need protocol framing, buffering, routing, and control functions in one device. Its 6,000 logic elements and 56,320 RAM bits support moderate-throughput packet handling, while 190 user I/O allow connection to multiple PHY, memory, and management interfaces. S-Ser DSP can accelerate data serialization or deserialization when the relevant clocks and lane constraints are implemented correctly. For production equipment, check the exact supported I/O standards, maximum interface rates, and configuration method. Use the implementation tools for timing-driven placement, and reserve separate logic for monitoring, boot, and recovery paths.
推薦
推薦產品摘要
工程參考資料,適用於 LFE2-6SE-6F256I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LFE2-6SE-6FN256I | LFE2-6E-6F256C | LFE2-6SE-7FN256C | LFE2-12SE-6F256 | LFE2-6SE-6F256C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 256-BGA | 256-FBGA | 256-FBGA | 256-FBGA | 256-FBGA | 256-FBGA |
| FPGA Family | ECP2 | ECP2 | ECP2 | ECP2 | ECP2 | ECP2 |
| Speed Ordering | -6 | -6 | -6 | -7 | -6 | -6 |
主要差異化特點
- Maintains the target ECP2 resource profile while offering a documented related ordering option (對比LFE2-6SE-6FN256I)
- Provides a larger same-family option when 6K LUT capacity becomes restrictive (對比LFE2-6E-6F256C)
- Targets the -6 speed grade with 190 user I/O for control-heavy designs (對比LFE2-6SE-7FN256C)
設計說明
Assign every BGA ball from the exact LFE2-6SE-6F256I package drawing rather than from a generic ECP2 diagram. Reserve all power, ground, configuration, and clock balls specified by the manufacturer, including any exposed thermal-pad connection. Place decoupling capacitance at the associated supply balls and preserve the recommended current paths. The 256-BGA footprint is too dense for last-minute pin reassignment without a complete layout and signal-integrity review.
Use manufacturer-defined constraints for every S-Ser and high-speed user I/O connection. Apply input and output timing constraints, package-delay information, and board-level loss assumptions consistently in the project. Treat the -6 ordering code as the timing target for the design. After placement and routing, inspect timing reports for unconstrained paths, high fanout nets, and clock-domain crossings before programming hardware.
Build the 1.2 V core budget from post-implementation utilization rather than a generic package-current maximum. Include core, memory, I/O, configuration, and auxiliary-supply loads, then add design margin for temperature and component tolerances. Use separate decoupling and power-distribution strategies for the core and I/O banks, and follow the manufacturer regulator-selection guidance. Verify startup current and configuration behavior as well as steady-state consumption.
Do not equate a shared 256-FBGA outline with guaranteed interchangeability. Check the ECP2 ordering table for density, speed, temperature, package, and configuration differences, and compare the complete ball map. A migration can also alter resource availability, pin-function restrictions, timing limits, and supported I/O standards. Run an unmodified synthesis and place-and-route comparison and test configuration before production approval.
合規資訊
The LFE2-6SE-6F256I is identified as industrial grade, but the verified product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.