onsemi

LM324ADG - Quad Op-Amp 1MHz 0.6V/us SOIC-14 | onsemi

MPN: LM324ADG ✓ Aktif
3 V to 32 V Vdss 14-SOIC (0.154 in, 3.90 mm Width) Package
MOQ: 1 |

LM324ADG Genel Bakış

The onsemi LM324ADG is a low-cost, single-supply quad operational amplifier with four independent, high-gain, internally frequency-compensated amplifiers in a 14-pin SOIC (3.90 mm width) package. It operates from a single 3 V to 32 V supply (or dual supplies of ±1.5 V to ±16 V), delivers a 1 MHz gain-bandwidth product and a 0.6 V/us slew rate, and draws quiescent current roughly one-fifth of that of comparable standard op amps.

An operational amplifier is a high-gain voltage amplifier with differential inputs and a single-ended output, the foundational building block of the analog signal chain. Within the amplifier hierarchy, the LM324ADG belongs to the general-purpose, single-supply op-amp family, sitting above specialized precision, high-speed, and rail-to-rail amplifiers and below discrete transistor front ends in complexity. Quad op amps integrate four amplifiers on one die, sharing bias circuitry to save board space, cost, and power versus four single amplifiers.

Key features include true differential inputs valid at ground (the common-mode input range extends to the negative rail, an LM324 family signature), a wide supply range from 3.0 V to 32 V that covers 5 V, 12 V, 15 V, and 24 V rails, four amplifiers per package for dense multi-channel analog designs, and internally compensated unity-gain stability that removes the need for external frequency-compensation capacitors.

Architecturally, the LM324A uses bipolar NPN input stages with PNP common-emitter amplifiers and Class AB outputs. The 'A' grade tightens the input offset voltage specification to a 3 mV maximum. Because the output stage is not rail-to-rail, the output swings to within roughly 1.5 V of V+ at light load while reaching close to the negative rail - a characteristic engineers must budget for when using the full supply range.

Typical applications include transducer signal conditioning, DC gain blocks, active filters, comparators with hysteresis, summing amplifiers, and multi-channel industrial sensor interfaces, where the single-supply ground-sensing input and four-amplifier density directly reduce component count.

Design consideration: the common-mode input range stops about 1.5 V below the positive rail, so keep input signals at least that far from V+ to avoid phase inversion or distortion.

This page adds value beyond the manufacturer datasheet by consolidating drop-in alternatives, parameter comparison tables, and practical design notes in one place for sourcing and design engineers.

Drop-in alternatifler için LM324ADG — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller LM324ADG (aynı form faktörü ve ayağa oturma) — farklı olan Slew Rate, Amplifier Type, Operating Temperature Range, Gain-Bandwidth Product, Package.

Texas Instruments
Slew Rate: 0.5 V/µs
Operating Temperature Range: -25°C to 85°C
Gain-Bandwidth Product: 1.2 MHz
İle Karşılaştır LM324ADG →
Texas Instruments
Slew Rate: 0.5 V/µs
Operating Temperature Range: -25°C to 85°C
Gain-Bandwidth Product: 1.2 MHz
İle Karşılaştır LM324ADG →
onsemi
Slew Rate: 0.6 V/µs
İle Karşılaştır LM324ADG →
Texas Instruments
Amplifier Type: General-purpose operational amplifier
Operating Temperature Range: 0 °C to 70 °C
Package: 14-pin SOIC
İle Karşılaştır LM324ADG →
Texas Instruments
Amplifier Type: Standard (General Purpose)
Operating Temperature Range: 0°C to 70°C
Gain-Bandwidth Product: 1 MHz
onsemi
Amplifier Type: Single-supply quad operational amplifier with true differential inputs
Gain-Bandwidth Product: 1 MHz
Package: 14-pin SOIC
İle Karşılaştır LM324ADG →
Texas Instruments
Slew Rate: 0.6 V/µs
Operating Temperature Range: −25 °C to 85 °C
Gain-Bandwidth Product: 1 MHz
İle Karşılaştır LM324ADG →
STMicroelectronics
Slew Rate: 4 V/us
Amplifier Type: General-purpose operational amplifier
Gain-Bandwidth Product: 12 MHz
İle Karşılaştır LM324ADG →

MC3403DR

✅ Yerleştirme
Texas Instruments
📦 14-SOIC
Quad operational amplifier · 4 circuits · ±2.5 V to ±15 V · 30 V · 1 MHz · 0.6 V/µs · −25 °C to 85 °C · True differential inputs

✓ Stokta

$0.4102 / Birim

Veri Şablonunu Görüntüle →

LM324ADR2G

✅ Yerleştirme
onsemi
📦 14-SOIC
General Purpose · 4 · 3 V to 32 V · ±1.5 V to ±16 V · 1 MHz · 0.6 V/µs · 3 mV

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

TS974IDT

✅ Yerleştirme
STMicroelectronics
📦 14-SOIC
General-purpose operational amplifier · 4 circuits · Yes · 12 MHz · 4 V/us · 4 nV/Hz · 0.003% · ±1.35 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM324ADT

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 14-SOIC
same die and SOIC-14 footprint as LM324ADG, supplied in tape-and-reel instead of tube for automated assembly

📋 Katalogda Olmayan Referans Alternatifi

LM224ADG

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 14-SOIC
military-temperature LM324A family variant, same pinout and SOIC-14 package, wider operating temperature range

📋 Katalogda Olmayan Referans Alternatifi

LM324ADG Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type General Purpose
Number of Circuits 4
Gain Bandwidth Product 1 MHz
Slew Rate 0.6 V/us
Supply Voltage Range (Single) 3 V to 32 V
Supply Voltage Range (Dual) +/-1.5 V to +/-16 V
Input Offset Voltage (Max) 3 mV
Paket / Kas 14-SOIC (0.154 in, 3.90 mm Width)
Montaj Türü Surface Mount
Packaging Tube
Temperature Grade Commercial
Unity Gain Stability Yes (internally frequency compensated)
Product Series LM324A (Single Supply Quad Operational Amplifiers)

LM324ADG Pin Yapısı

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Pin 1 OUT1 — Output of amplifier 1
Pin 2 IN1- — Inverting input of amplifier 1
Pin 3 IN1+ — Non-inverting input of amplifier 1
Pin 4 V+ — Positive supply voltage
Pin 5 IN2+ — Non-inverting input of amplifier 2
Pin 6 IN2- — Inverting input of amplifier 2
Pin 7 OUT2 — Output of amplifier 2
Pin 8 OUT3 — Output of amplifier 3
Pin 9 IN3- — Inverting input of amplifier 3
Pin 10 IN3+ — Non-inverting input of amplifier 3
Pin 11 VEE/GND — Negative supply or ground reference
Pin 12 IN4+ — Non-inverting input of amplifier 4
Pin 13 IN4- — Inverting input of amplifier 4
Pin 14 OUT4 — Output of amplifier 4

Tipik Uygulamalar

LM324ADG için uygundur 6 uygulamas: Transducer Signal Conditioning, DC Gain Blocks and Summing Amplifiers, Active Filters, Comparators with Hysteresis, Industrial Sensor Interfaces on 24V Rails, Consumer Audio Preamps and Mixers.

🔧

Transducer Signal Conditioning

The LM324ADG fits transducer signal conditioning because its common-mode input range extends down to the negative supply rail, allowing sensors such as thermistors, strain-gauge bridges, and photodiode outputs referenced to ground to be amplified directly without level shifting. With four amplifiers per SOIC-14 package, a multi-channel sensor board can implement per-channel gain stages with one device, cutting component count and cost. The 1 MHz gain-bandwidth product supports closed-loop gains of 10 to 100 with bandwidths of 10 kHz down to 1 kHz, adequate for most physical-parameter sensing where signal content sits well below audio frequencies. Place a gain-setting resistor network per channel and add a small feedback capacitor for stability with high-value resistors; the 0.6 V/us slew rate comfortably handles slow sensor transients without slewing distortion.

⚡

DC Gain Blocks and Summing Amplifiers

For DC gain blocks, the LM324ADG's 'A'-grade 3 mV maximum input offset voltage limits output error to offset multiplied by the closed-loop gain - for example, 300 mV of output offset at a gain of 100, which many industrial tolerance budgets accept without trimming. The quad integration lets one package build a complete summing junction plus buffer chain, with shared bias circuitry reducing quiescent current to roughly one-fifth of four discrete standard op amps. True differential inputs support standard inverting and non-inverting topologies from a single 3 V to 32 V rail, eliminating the negative supply in many designs. When computing accuracy, add resistor-network tolerance and bias-current errors on top of the 3 mV offset; use balanced source impedances at both inputs so bias currents cancel, a technique highlighted in the LM324 application guidance.

🔧

Active Filters

The LM324ADG implements Sallen-Key and multiple-feedback active filters for cutoff frequencies up to roughly 20 kHz, constrained by the 1 MHz gain-bandwidth product: at a unity-gain Sallen-Key stage, the Q error stays low when the cutoff frequency remains below about 1/20th of the GBW. Four amplifiers per SOIC-14 package allow a complete fourth-order filter - two cascaded second-order stages - from one device, ideal for anti-aliasing pre-filters and audio-band shaping in industrial controllers. The ground-sensing input range permits single-supply filter designs biased at mid-rail with simple resistor dividers. Note that the 0.6 V/us slew rate limits large-signal handling above the audio band, so keep filter outputs within a few volts of swing at higher frequencies to avoid slewing-induced distortion; add a post-filter buffer channel from the same package.

🏭

Comparators with Hysteresis

One LM324ADG channel works as a comparator with hysteresis using positive feedback resistors, and the quad package provides four independent threshold detectors in a single SOIC-14 footprint for multi-level battery monitoring, window comparators, and limit switches. Because the input common-mode range reaches the negative rail, thresholds referenced to ground are sensed directly, and the output pulling near ground drives logic and LED loads in single-supply systems. Note that this is a slow comparison path: with 0.6 V/us slew rate and 1 MHz GBW, response times sit in the microsecond range, so it is unsuitable for fast clock recovery or high-speed protection loops - use a dedicated comparator there. Add hysteresis of at least tens of millivolts via the feedback divider to prevent chatter from noisy sensor inputs near the threshold.

🏭

Industrial Sensor Interfaces on 24V Rails

Factory-floor systems commonly run 24 V single-supply rails, and the LM324ADG's 32 V maximum supply accepts this directly without a pre-regulator, simplifying interface boards for 4-20 mA current loops, proximity sensors, and level detectors. Four channels per package support multi-point monitoring - loop sense, scaling amplifier, alarm comparator, and output buffer - from one SOIC-14 device. The commercial temperature grade suits enclosed panel environments; verify enclosure temperature against the operating range in the manufacturer datasheet before deployment in hot cabinets. The ground-sensing inputs read low-side shunt voltages directly, and the output swings close to ground for ADC-friendly low-level signals. Budget headroom: signals within about 1.5 V of the 24 V rail cannot be faithfully amplified, so scale loops into the 0.3 V to 3 V mid-range region.

🎧

Consumer Audio Preamps and Mixers

In cost-sensitive consumer audio, the LM324ADG supplies microphone preamp, mixer summing, and line-buffer stages in one quad package, keeping BOM cost low for mixers, small PA heads, and set-top audio front ends. Biasing at mid-supply with a resistor divider enables single-supply AC-coupled operation, and the ground-reaching input range simplifies bias networks. The trade-off is performance class: 1 MHz GBW and 0.6 V/us slew rate mean full output swing is limited to roughly 10 kHz signals, and noise and distortion are higher than dedicated audio op amps, so use it where cost dominates and signal levels are moderate. For upgraded channels needing more bandwidth and lower distortion in the same footprint, the TS974IDT offers a pin-compatible improvement path without PCB changes.

What is the supply voltage range of the LM324ADG?
The LM324ADG operates from a single supply of 3 V to 32 V, or from dual supplies of ±1.5 V to ±16 V. According to the onsemi LM324 series datasheet, the quad amplifier can operate at supply voltages as low as 3.0 V or as high as 32 V with quiescent currents about one-fifth of those associated with comparable standard op amps, making it well suited to 5 V, 12 V, 15 V, and 24 V single-supply industrial designs.
Where can I download the LM324ADG datasheet PDF?
The LM324ADG datasheet PDF is published by onsemi under the title 'LM324 - Single Supply Quad Operational Amplifiers' and is a 14-page document. Use the datasheet link on this page or search the onsemi.com product page for LM324ADG to get the latest revision. The datasheet contains the absolute maximum ratings, electrical characteristics tables, typical performance curves, and application circuits for the full LM324 family.
What is the slew rate and gain bandwidth product of the LM324ADG?
The LM324ADG has a slew rate of 0.6 V/us and a gain-bandwidth product of 1 MHz. These figures define its usable signal bandwidth: at a closed-loop gain of 10, the -3 dB bandwidth is approximately 100 kHz, and full-power sine performance is limited to roughly 10 kHz for 10 Vpp outputs. Applications requiring faster edges or higher frequency gain should consider a higher-speed quad such as the TL074 family instead.
What is the difference between the LM324ADG and the LM324M?
The LM324ADG is the 'A' grade of the LM324 family in a 14-SOIC package with a tightened maximum input offset voltage of 3 mV, while the LM324M is the non-A grade in the same SOIC-14 footprint with a wider offset specification. Both are pin-to-pin compatible quad, single-supply operational amplifiers from onsemi with the same 1 MHz gain-bandwidth product, so the LM324ADG can replace the LM324M wherever better offset accuracy is acceptable at the same footprint.
Can the TS974IDT replace the LM324ADG?
Yes, the STMicroelectronics TS974IDT is a pin-compatible quad operational amplifier in the same 14-SOIC package and can replace the LM324ADG in most circuits. The TS974 offers a higher gain-bandwidth product and rail-to-rail output capability, so performance actually improves in most designs, but verify behavior where the circuit relies on LM324-specific output-stage characteristics near the positive rail. Confirm the offset and supply ratings against your design before releasing the substitution.
What is the best drop-in replacement for the LM324ADG?
The best drop-in replacements are the onsemi MC3403DR and the Texas Instruments LM324ADR, both of which are quad operational amplifiers in the same 14-SOIC package with pin-to-pin compatibility. The MC3403DR matches the LM324 family's general-purpose, single-supply character closely, while the TI LM324ADR is the same LM324 architecture from a second source. Both allow same-footprint substitution with no PCB rework; compare offset voltage and supply current limits against your specifications before release.
What is the input offset voltage of the LM324ADG?
The LM324ADG has a maximum input offset voltage of 3 mV, which is the tightened 'A'-grade specification of the LM324 family. Per the onsemi datasheet, the standard (non-A) LM324 parts specify a larger offset maximum, so the 'A' grade is preferred for DC-accurate gain blocks and transducer conditioning where a few millivolts of input-referred error would be amplified by the closed-loop gain into meaningful output error.
Is the LM324ADG suitable for single-supply 5V operation?
Yes, the LM324ADG is explicitly designed for single-supply operation down to 3 V, so 5 V operation is fully within its 3 V to 32 V rating. Its common-mode input range includes the negative rail, meaning inputs at 0 V are valid - a defining LM324 advantage. Budget for the output stage, which swings close to ground but stops roughly 1.5 V below V+, so at 5 V the maximum output swing is limited to about 3.5 V.
Is the LM324ADG rail-to-rail?
No, the LM324ADG is not a rail-to-rail operational amplifier. Its input common-mode range extends from below the negative rail to approximately 1.5 V below the positive rail, and the bipolar output stage pulls close to the negative rail but stops roughly 1.5 V short of V+ at typical loads. If full-swing inputs or outputs near the positive rail are required, select a rail-to-rail quad amplifier instead; for signals near ground, the LM324ADG works well.
Where can I buy the LM324ADG online?
You can request the LM324ADG through the Request a Quote form on this page. XAIPART sources the part in tube packaging as supplied by onsemi, and the quote response includes current stock, unit pricing at your quantity, and lead time. Standard 14-SOIC tube packaging suits prototype and low-volume assembly, so request the packaging format you need when submitting the quote.
What is the price of the LM324ADG?
LM324ADG unit pricing depends on order quantity and current market availability, so exact figures are not fixed on this page. Submit the Request a Quote form on this page to receive a quantity-based price for your required volume, including any volume-break discounts. As a general-purpose quad op amp in a mature process, it is positioned in the low-cost segment of the amplifier market, consistent with its design intent as a low-cost quad operational amplifier.
What is the lead time for the LM324ADG?
Lead time for the LM324ADG varies with distributor stock and onsemi production schedules at the time of order. The LM324 family is a mature, actively manufactured product line, which typically keeps lead times short relative to allocation-prone newer devices. Submit the Request a Quote form on this page and the response will state the current lead time and available stock for your quantity and packaging requirement.
What is the pinout of the LM324ADG in the SOIC-14 package?
In the 14-SOIC package, the LM324ADG pinout is: pin 1 OUT1, pin 2 IN1-, pin 3 IN1+, pin 4 V+, pin 5 IN2+, pin 6 IN2-, pin 7 OUT2, pin 8 OUT3, pin 9 IN3-, pin 10 IN3+, pin 11 VEE/GND, pin 12 IN4+, pin 13 IN4-, and pin 14 OUT4. Pin 4 is the positive supply and pin 11 is ground or the negative supply in dual-supply use. Use the manufacturer datasheet pin diagram for the authoritative reference when laying out the PCB.
Is the LM324ADG RoHS compliant?
The compliance status of the LM324ADG for RoHS, REACH, lead-free, and halogen-free categories is not stated in this page's source listings, so treat it as unconfirmed until verified. Check the onsemi product page for LM324ADG, which carries the official RoHS and REACH declarations and material composition data. onsemi's modern SOIC production is generally lead-free finished, but design-in decisions for regulated markets should rely on the manufacturer's certificate rather than assumption.
What are the key specifications of the LM324ADG that engineers should know?
The LM324ADG is a four-channel, general-purpose, single-supply operational amplifier in 14-SOIC with a 1 MHz gain-bandwidth product, 0.6 V/us slew rate, 3 V to 32 V single-supply (±1.5 V to ±16 V dual) range, 3 mV maximum input offset voltage, ground-sensing common-mode input range, and internal unity-gain frequency compensation. Output swing reaches near the negative rail but stops roughly 1.5 V below the positive rail. It suits multi-channel, low-frequency analog conditioning in industrial and consumer equipment.

Mühendislik referans verileri: LM324ADG — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the LM324ADG when you need a low-cost, single-supply quad op amp with DC accuracy at the 'A' grade (3 mV offset max), signals near ground, and a supply from 3 V to 32 V - typical for transducer conditioning, active filters, and 24 V industrial interfaces in tube-packed prototype or low-volume builds. Choose the onsemi MC3403DR for a pin-compatible second source within the same footprint when supply-chain redundancy matters. Choose the Texas Instruments LM324ADR for the same LM324 architecture from a second vendor in tape-and-reel for automated assembly. Choose the STMicroelectronics TS974IDT if your circuit benefits from higher bandwidth or rail-to-rail output - it is pin-compatible but changes output-stage behavior, so verify near-rail performance. Trade-off to accept: the LM324ADG is not rail-to-rail and is slow (1 MHz GBW, 0.6 V/us); for fast or full-swing signals, move to a higher-spec quad rather than forcing this device.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MC3403DR LM324ADR TS974IDT LM324ADT
Package 14-SOIC (3.90 mm) 14-SOIC (3.90 mm) - same 14-SOIC (3.90 mm) - same 14-SOIC (3.90 mm) - same 14-SOIC (3.90 mm) - same
Brand onsemi onsemi Texas Instruments STMicroelectronics onsemi
Number of Circuits 4 4 4 4 4
Packaging Tube Tape & Reel Tape & Reel Tape & Reel Tape & Reel

Ana Farklılayıcılar

  • 'A'-grade 3 mV maximum input offset voltage (karşılaştırma:LM324M)
  • Lower quiescent power than four discrete op amps (karşılaştırma:MC3403DR)
  • Ground-sensing input range at low cost (karşılaştırma:TS974IDT)

Tasarım Notları

The LM324ADG input common-mode range extends to the negative rail but stops about 1.5 V below the positive supply. Driving an input within roughly 1.5 V of V+ causes the output to step or invert unexpectedly - a classic LM324 failure mode. Bias single-supply circuits at mid-rail or keep input peaks below V+ minus 1.5 V. Similarly, budget output swing: at light loads the output reaches near ground but stops about 1.5 V short of V+. Reference the manufacturer datasheet typical-performance curves when computing usable swing at your specific load.

Capacitively decouple the V+ pin (pin 4) with a 100 nF ceramic placed within a few millimeters of the pin plus a 1 uF bulk capacitor per board region. Because four amplifiers share one supply pin, transient currents from simultaneous output transitions can couple between channels through shared supply impedance; a local decoupling network plus short, wide supply traces suppresses this cross-channel interference. In mixed-signal boards, keep op-amp supply returns separate from digital ground returns until a single deliberate star point.

Unused LM324 channels must be terminated, not left floating: configure each unused amplifier as a unity-gain follower with its output tied to its inverting input and the non-inverting input connected to mid-supply (or ground-referenced divider). Floating inputs pick up board noise, can slew to a rail, and inject crosstalk into adjacent active channels through the shared die and supply. This termination practice also prevents unintended oscillation of the internally compensated stages.

Keep feedback resistors in the 1 kOhm to 100 kOhm range: very large values amplify input bias-current error into output offset, while very small values load the bipolar output stage and increase distortion. For high-value feedback networks, add a small parallel capacitor (a few pF) across the feedback resistor to limit noise gain and ensure phase margin, per standard LM324 application practice. Route input traces short and guard them from output traces to avoid parasitic feedback at high closed-loop gains.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance declarations were not stated in this page's source listings. Consult the official onsemi product page for LM324ADG for RoHS, REACH, and material-composition certificates.

Veri doğrulanma tarihi: 2026-11-08 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

lm324adg datasheet LM324ADG datasheet pdf LM324ADG pinout LM324ADG equivalent LM324ADG replacement LM324ADG cross reference LM324ADG vs LM324M onsemi LM324ADG LM324ADG price LM324 quad op amp SOIC-14 single supply quad operational amplifier 1MHz LM324ADG application circuit

İlgili Bileşenler ve Terimler

onsemi LM324ADG LM324 series MC3403DR LM324ADR TS974IDT operational amplifier quad op amp general-purpose amplifier single-supply amplifier gain bandwidth product slew rate input offset voltage 14-SOIC SOIC package family surface mount tube packaging transducer signal conditioning active filter commercial temperature grade
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle