onsemi

LM324ADTBG - 4-Channel 3-32V Op Amp | onsemi | TSSOP-14

MPN: LM324ADTBG ✓ Aktif
3 V to 32 V Vdss 2 nA typical Id 14-pin TSSOP Package
MOQ: 1 |

LM324ADTBG Genel Bakış

The onsemi LM324ADTBG is a four-channel general-purpose operational amplifier designed for single-supply operation from 3 V to 32 V and packaged in a 14-pin TSSOP. Each amplifier provides true differential inputs, internal frequency compensation, and an approximately 1 MHz gain-bandwidth product, making the device suitable for low-cost signal conditioning, buffering, and analog control applications.

An operational amplifier is an analog integrated circuit that uses high-gain differential amplification to increase the voltage difference between its two inputs. The quad operational-amplifier category groups four amplifiers in one package, reducing board area compared with four discrete single amplifiers. Within the broader hierarchy, the LM324 belongs to the amplifier IC and signal-chain categories, with applications spanning instrumentation, industrial control, sensor interfaces, and power-management circuits.

Key characteristics include a 3 V to 32 V supply range, approximately 0.6 V/µs slew rate, 3 mV typical input-offset voltage, and 2 nA typical input-offset current. The device can operate with a single positive supply or split supplies, while its common-mode input range includes ground. These characteristics make it useful for battery-powered equipment and other low-voltage systems where the input signal may approach the lower supply rail.

The four internal amplifiers use true differential input stages and are internally frequency compensated for unity-gain operation. The approximate 1 MHz gain-bandwidth product favors moderate-speed applications rather than precision signal paths demanding megahertz bandwidth or microvolt-level offset. Typical offset-current behavior supports high-impedance sensing, but source impedance must still be balanced to minimize offset and bias-current errors.

Typical uses include current-to-voltage conversion in sensor interfaces, audio preamplification, comparator-style thresholding, active filtering, relay driving, and low-side current monitoring. The four amplifiers can also implement independent sensor channels, instrument loops, or gain stages where package size and cost matter more than precision or slew rate.

When laying out the circuit, place input resistors close to the noninverting and inverting pins to reduce parasitic pickup, especially with high source impedance. Decoupling capacitors should be connected from each supply pin to ground with a short return path. Keep sensitive input traces away from switching nodes and provide adequate output-current headroom for capacitive loads because the LM324 is not rail-to-rail.

This product guide combines package information, functional application guidance, selection criteria, and pin-compatible alternatives to simplify footprint planning and sourcing. For exact lead assignments, electrical limits, and ordering details, use the manufacturer datasheet and the technical information linked on this page.

Drop-in alternatifler için LM324ADTBG — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller LM324ADTBG (aynı form faktörü ve ayağa oturma) — farklı olan Gain-Bandwidth Product, Input Offset Voltage, Package.

Texas Instruments
Gain-Bandwidth Product: 1.2 MHz
Input Offset Voltage: 3 mV
Package: 14-pin TSSOP (PW)
İle Karşılaştır LM324ADTBG →

LM324APWR

✅ Yerleştirme
Texas Instruments
📦 TSSOP-14 (PW)
4 circuits · General-purpose operational amplifier · 30 V · 1.2 MHz · 3 mV · 0°C to 70°C · 14-pin TSSOP (PW) · 14 pins

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

TLV324IPWR

✅ Yerleştirme
📦 TSSOP-14 (PW)
Same 14-pin TSSOP quad-amplifier footprint; supply-voltage and power-consumption ratings differ by up to 30% because TLV324 targets lower-voltage operation.

📋 Katalogda Olmayan Referans Alternatifi

LMV324IPWR

✅ Yerleştirme
📦 TSSOP-14 (PW)
Same 14-pin TSSOP quad-amplifier footprint; lower-voltage supply design changes maximum supply capability by approximately 81% versus 32 V.

📋 Katalogda Olmayan Referans Alternatifi

TLV9004IPWR

✅ Yerleştirme
📦 TSSOP-14 (PW)
Same 14-pin TSSOP quad-amplifier footprint; rail-to-rail output behavior and 1 MHz bandwidth differ functionally from LM324A's non-rail-to-rail output.

📋 Katalogda Olmayan Referans Alternatifi

MCP6004-I/ST

✅ Yerleştirme
📦 TSSOP-14
Same 14-pin TSSOP quad-amplifier footprint; 1 MHz bandwidth is comparable, while maximum supply voltage and input-offset performance are lower by up to 30%.

📋 Katalogda Olmayan Referans Alternatifi

LM324ADTBG Maksimum Değerlendirmeler & Elektriksel Özellikler

Number of Amplifiers 4 circuits
Amplifier Type General-purpose operational amplifier
Supply Voltage Range 3 V to 32 V
Gain-Bandwidth Product Approximately 1 MHz
Slew Rate 0.6 V/µs
Input Offset Voltage 3 mV typical
Input Offset Current 2 nA typical
Supply Current per Amplifier 0.8 mA typical
ESD Protection 2 kV
Input Configuration True differential
Compensation Internally frequency compensated
Common-Mode Input Range Includes ground
Paket 14-pin TSSOP
Montaj Türü Surface mount
Çıkış Türü Push-pull

LM324ADTBG 14-pin tssop Pin Yapısı Kılavuzu

LM324ADTBG (14-pin tssop paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

14-pin tssop paket pin çizelgesi için LM324ADTBG

Ayrıntılı pin çıkış verisi mevcut değil: LM324ADTBG.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

LM324ADTBG için uygundur 6 uygulamas: Low-Cost Sensor Signal Conditioning, Industrial Current Monitoring, Audio Preamplifier, Active Filtering and Thresholding, Power-Supply Feedback and Control, Portable and Battery-Powered Equipment.

🧩

Low-Cost Sensor Signal Conditioning

The LM324ADTBG suits general-purpose conditioning of sensor signals that operate within a 3 V to 32 V supply environment. Its true differential inputs support amplification of small differential voltages, while the common-mode input range including ground is useful for sensors referenced to the lower rail. The approximately 1 MHz gain-bandwidth product is adequate for moderate-bandwidth measurements, but the 3 mV typical offset can dominate low-level sensor outputs. Designers should therefore use calibration or offset trimming when accuracy requirements exceed the LM324A’s normal general-purpose performance.

🏭

Industrial Current Monitoring

For low-side or high-side current monitoring with moderate bandwidth, the LM324ADTBG can amplify the voltage generated by a sense resistor and buffer the result for an ADC or controller. Its four channels allow several measurement points to be handled in one package, and the 0.6 V/µs slew rate supports relatively slow feedback loops. The 3 mV typical input-offset voltage translates directly into sensing error across the shunt resistor, so precision systems should include offset calibration or select a lower-offset amplifier.

🎧

Audio Preamplifier

The LM324ADTBG can provide gain for microphone, line, or headphone-driver stages when cost and simplicity are more important than low distortion. Four amplifiers in a single 14-pin TSSOP reduce board area, and unity-gain stability simplifies first-stage implementation. The approximately 1 MHz bandwidth and 0.6 V/µs slew rate limit high-frequency and large-signal performance, while the device is not rail-to-rail. Headphone and line-output designs should verify voltage swing, load impedance, and distortion against the actual supply voltage.

🔧

Active Filtering and Thresholding

The LM324ADTBG is well suited to first-order or low-order active filters, peak detectors, window comparators, and threshold circuits in general-purpose control equipment. Its internally compensated amplifiers support stable unity-gain operation, and the 14-pin TSSOP provides four channels for compact filter or conditioning networks. Component tolerances and the 3 mV input offset can shift filter and switching thresholds, so production designs should include realistic tolerance analysis and calibration where repeatable thresholds are important.

⚡

Power-Supply Feedback and Control

The LM324ADTBG can supervise a regulated rail, amplify the difference between a feedback node and a reference, or form part of a slow analog regulation loop. Its operation from 3 V to 32 V permits use in both compact low-voltage systems and higher-voltage industrial supplies. The non-rail-to-rail output and 3 mV typical offset limit sensing accuracy near either rail, while the approximately 1 MHz bandwidth is more than adequate for many slow control loops. Stable feedback layout and decoupling should be verified in the final power-supply design.

📱

Portable and Battery-Powered Equipment

The LM324ADTBG can amplify signals in portable equipment because its specified supply operation begins at 3 V and the common-mode input range includes ground. Four amplifiers are available for a compact multi-channel implementation, reducing both package count and board area. The typical per-amplifier supply current is 0.8 mA, making the device practical for modest-power systems. Its input-offset voltage remains the main precision limitation, and its non-rail-to-rail output requires attention when signals approach the upper supply rail.

What is the operating voltage of LM324ADTBG?
The LM324ADTBG operates from 3 V to 32 V as a single-supply operational amplifier, or from split positive and negative supplies within the corresponding total range. According to the onsemi LM324 datasheet, the four amplifiers can also function from dual supplies, making the device suitable for both battery-powered systems and higher-voltage industrial control circuits.
How many operational amplifiers are in LM324ADTBG?
The LM324ADTBG contains four independently usable general-purpose operational amplifiers in one 14-pin TSSOP package. According to the onsemi LM324 datasheet, each channel has true differential inputs and internal frequency compensation. The integrated quad arrangement saves board area and simplifies power distribution in designs requiring several low-cost analog signal-conditioning channels.
What is the gain-bandwidth product of LM324ADTBG?
The LM324ADTBG has an approximate 1 MHz gain-bandwidth product per amplifier, according to the onsemi LM324 datasheet. This bandwidth supports low-frequency signal conditioning, buffering, and moderate closed-loop gains, but it is not intended for high-speed video, RF, or precision closed-loop applications demanding substantially wider bandwidth and faster settling.
Where can I download the LM324ADTBG datasheet PDF?
The LM324ADTBG datasheet can be downloaded from the manufacturer-linked PDF available on this page. It contains the electrical characteristics, pin assignments, typical application circuits, and package drawings. The onsemi LM324 datasheet is the primary reference for design limits; the manufacturer should be contacted when a document revision or controlled copy is required for qualification.
Where can I find the LM324ADTBG pinout?
The LM324ADTBG pin assignments are identified in the pin-description table and package drawing of the onsemi LM324 datasheet. The device uses a 14-pin TSSOP package. Use that table when assigning input, output, positive-supply, and negative-supply connections; do not infer lead functions from another LM324 package because suffix codes can change the physical package.
What is the input offset voltage of LM324ADTBG?
The LM324ADTBG has a typical input-offset voltage of 3 mV, according to the onsemi LM324 datasheet. This offset is appropriate for general-purpose sensing and control, but it can create meaningful error in precision bridges, low-level current measurements, or instrumentation requiring millivolt-level accuracy without calibration.
Can LM324ADTBG operate from a single 5 V supply?
Yes, the LM324ADTBG can operate from a single 5 V supply because its specified operating range begins at 3 V. According to the onsemi LM324 datasheet, its common-mode input range includes ground, which is useful for signals referenced to the lower rail. The output still requires adequate headroom from each supply rail for linear operation.
LM324ADTBG vs LM324APWR: which is suitable for a TSSOP-14 design?
Both LM324ADTBG and LM324APWR are associated with the LM324A family and a 14-pin TSSOP footprint, but they are offered by different manufacturers. The onsemi LM324ADTBG is the primary choice for an onsemi-controlled bill of materials, while LM324APWR is a Texas Instruments option. Confirm pin functions, electrical limits, temperature grade, and qualification requirements before substitution.
When should I choose LM324ADTBG over LM324APWR?
Choose LM324ADTBG when the design requires the onsemi LM324A device in a 14-pin TSSOP package or when onsemi supply continuity is preferred. Choose LM324APWR when the Texas Instruments version offers a better commercial fit or approved second source. Both are general-purpose quad amplifiers, so the final choice should also consider offset, bandwidth, temperature, and quality requirements.
Is LM324ADTBG suitable for sensor signal conditioning?
The LM324ADTBG is suitable for many general-purpose sensor signal-conditioning circuits because it offers true differential inputs, a common-mode range that includes ground, and approximately 1 MHz bandwidth per channel. Its 3 mV typical offset may be too large for high-accuracy measurements. Offset-prone applications should use calibration, gain trimming, or a more precise amplifier.
What can replace LM324ADTBG in the same TSSOP-14 footprint?
Pin-compatible replacements include selected LM324A-family amplifiers and closely related quad op amps offered in the same 14-pin TSSOP format. Compatibility must be checked for pin functions, input common-mode range, output swing, supply limits, offset voltage, bandwidth, and capacitive-load behavior. A footprint match alone does not guarantee identical electrical performance.
What is the best Texas Instruments equivalent for LM324ADTBG?
The Texas Instruments LM324APWR is the most direct same-package alternative identified for the LM324ADTBG because both are 14-pin TSSOP LM324A-family devices. It provides a practical alternative source for existing LM324A-based layouts, although production engineers should compare the latest manufacturer datasheets for electrical limits, temperature grade, qualification, and lifecycle requirements.
Where can I buy LM324ADTBG and check its current lead time?
Use the Request a Quote form on this page to request LM324ADTBG availability, current lead time, and an order quote. The form connects the request with the appropriate sales workflow without embedding a changing stock quantity into the page. Confirm the exact suffix, 14-pin TSSOP package, and required shipment quantity when placing the order.
What is the price of LM324ADTBG?
Use the Request a Quote form on this page for the current LM324ADTBG unit and volume pricing. Pricing depends on quantity, package suffix, order conditions, and market availability, so a static value can become inaccurate. The form also allows the buyer to specify required quantity and delivery expectations.
Is LM324ADTBG in stock?
Current LM324ADTBG stock status should be confirmed through the Request a Quote form on this page. Inventory for a specific suffix can change quickly, so a distributor landing page does not guarantee allocation for a production order. Provide the required quantity, date code preference, and shipping destination when requesting availability.
What are the key specifications of LM324ADTBG that engineers should know?
The key LM324ADTBG specifications are four amplifiers per package, a 3 V to 32 V supply range, approximately 1 MHz gain-bandwidth product, 0.6 V/µs slew rate, 3 mV typical input-offset voltage, and 2 nA typical input-offset current. According to the onsemi LM324 datasheet, the device uses true differential inputs and true single-supply operation in a 14-pin TSSOP package.

Mühendislik referans verileri: LM324ADTBG — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the LM324ADTBG for cost-sensitive, general-purpose analog designs that need four amplifiers, true differential inputs, operation from 3 V to 32 V, and a common-mode input range extending to ground. It is a practical choice for slow sensor conditioning, current monitoring, audio preamplification, filtering, and industrial control. Select LM324APWR when a Texas Instruments LM324A source is preferred while retaining the 14-pin TSSOP footprint. Consider TLV324IPWR or LMV324IPWR when lower-voltage operation is acceptable and lower power consumption is desirable. Choose TLV9004IPWR or MCP6004-I/ST when rail-to-rail input or output behavior is required, provided their lower maximum supply ratings meet the design. In every case, verify pin functions, offset requirements, temperature grade, output swing, capacitive-load stability, and lifecycle status against the current manufacturer datasheet.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün LM324APWR TLV324IPWR LMV324IPWR TLV9004IPWR MCP6004-I/ST
Package TSSOP-14 TSSOP-14 TSSOP-14 TSSOP-14 TSSOP-14 TSSOP-14
Brand onsemi Texas Instruments Texas Instruments Texas Instruments Texas Instruments Microchip Technology
Number of Amplifiers 4 4 4 4 4 4

Ana Farklılayıcılar

  • Supports a wide single-supply operating range (karşılaştırma:MCP6004-I/ST)
  • Maintains approximately 1 MHz bandwidth in a four-channel package (karşılaştırma:TLV9004IPWR)
  • Provides direct onsemi family continuity (karşılaştırma:LM324APWR)

Tasarım Notları

Place the LM324ADTBG input and feedback components close to the associated amplifier pins. Keep each noninverting and inverting route short and symmetrical where possible, particularly in high-impedance sensor circuits. Connect supply decoupling directly between the supply pins and ground, and provide a low-impedance ground return. Avoid routing sensitive input traces beneath digital, relay, or switching-regulator paths.

Do not treat the LM324ADTBG as a precision or rail-to-rail amplifier. Its 3 mV typical input-offset voltage can create visible error in low-level measurements, and output swing is limited near the supply rails. The common-mode input range includes ground, but that does not make the output rail-to-rail. Verify signal amplitude, headroom, and output load against the manufacturer electrical-characteristics curves before finalizing analog gains.

Balance the source impedances seen by each input because input-bias current can create additional offset when unequal impedances are used. For capacitive loads, add an isolation resistor close to the output and verify stability with the actual load and PCB capacitance. The approximately 1 MHz bandwidth is suitable for general-purpose conditioning, but it does not support high-speed closed-loop layouts or large capacitive loads without additional compensation.

The 14-pin TSSOP is intended for surface-mount assembly and ordinary PCB thermal management. Its small lead area limits heat dissipation compared with larger packages, so monitor channel dissipation when driving low-resistance or capacitive loads. Keep the device away from nearby heat sources and maintain copper around the package when its operating environment is elevated. Follow the manufacturer maximum ratings for junction temperature and supply voltage.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current onsemi product documentation or supplier declaration.

İlgili Aramalar

LM324ADTBG LM324ADTBG datasheet LM324ADTBG datasheet pdf LM324ADTBG pinout LM324ADTBG TSSOP-14 LM324ADTBG equivalent LM324ADTBG replacement LM324ADTBG vs LM324APWR onsemi LM324ADTBG LM324ADTBG price LM324ADTBG stock LM324ADTBG 3V 32V amplifier LM324ADTBG sensor signal conditioning LM324ADTBG footprint

İlgili Bileşenler ve Terimler

onsemi LM324ADTBG LM324APWR TLV324IPWR LMV324IPWR TLV9004IPWR MCP6004-I/ST quad operational amplifier general-purpose amplifier amplifier IC operational amplifier true differential input single-supply operation integrated circuit semiconductor TSSOP-14 TSSOP family surface mount SMD package 3 V to 32 V supply 1 MHz gain-bandwidth product 0.6 V/µs slew rate 3 mV input offset voltage 2 nA input offset current sensor signal conditioning
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle