Texas Instruments

LM324KANSR - 1.2MHz Quad Op Amp | Texas Instruments

MPN: LM324KANSR ✓ Aktif
14-SO, 0.209 inch (5.30 mm) width Package
MOQ: 1 |

LM324KANSR Genel Bakış

The Texas Instruments LM324KANSR is a four-circuit general-purpose operational amplifier with a 1.2 MHz gain-bandwidth product, supplied in a 14-pin small-outline integrated-circuit package. The device contains four independent, internally frequency-compensated amplifiers designed for general-purpose signal conditioning, control, and analog signal-processing applications.

An operational amplifier, commonly abbreviated op amp, is a high-gain differential amplifier. Within the broader semiconductor hierarchy, an op amp belongs to the linear amplifier family, which sits within amplifier ICs and analog signal-processing devices. LM324-type amplifiers are valued for straightforward operation from single or split supplies, broad input-voltage flexibility, and low cost. The LM324KANSR is specifically identified as a 14-SO device.

The four-amplifier configuration allows one package to serve several independent signal paths. Its 1.2 MHz gain-bandwidth product supports general-purpose feedback networks, instrumentation-style buffering, comparators with suitable hysteresis, differential summing circuits, and low-frequency active-filter stages. Because the amplifiers are frequency compensated, many common closed-loop configurations do not require external compensation components.

Each circuit operates independently, allowing four unrelated signals to be processed simultaneously while sharing one package and supply connection. The 14-pin arrangement provides four amplifier sections, supply pins, and input or output connections for every channel. Its standard general-purpose classification supports broad industrial, instrumentation, control, audio, and interface applications where moderate bandwidth and precision are sufficient.

Typical uses include sensor-signal conditioning, low-level signal amplification, active filtering, control-loop support, transducer interfacing, and general analog conditioning. Because the four channels operate independently, a single device can implement a sensor amplifier, output buffer, active filter section, and auxiliary gain stage when the required accuracy and bandwidth meet the application requirements.

When assigning PCB tracks, use the pin-description table in the Texas Instruments datasheet and preserve the pin order associated with the 14-SO outline. Decouple the supply pins with the capacitance and placement required by the datasheet, and verify input and output common-mode limits for every operating condition. Stable feedback-network values and proper grounding are important because the 1.2 MHz bandwidth limits high-frequency gain and stability margin.

This page combines the exact LM324KANSR ordering information, package details, sourcing guidance, drop-in replacement analysis, and practical design guidance to support faster component selection, PCB implementation, and legacy-design maintenance.

Drop-in alternatifler için LM324KANSR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller LM324KANSR (aynı form faktörü ve ayağa oturma) — farklı olan Package, Product Type, Amplifier Count, Number of Channels, Supply Configuration.

Texas Instruments
Package: 14-SO
Product Type: Quad general-purpose operational amplifier
Supply Configuration: Single supply or dual supply
İle Karşılaştır LM324KANSR →
Texas Instruments
Package: 14-SOIC (0.154 inch, 3.90 mm width)
Number of Channels: 4 circuits
İle Karşılaştır LM324KANSR →
Texas Instruments
Package: 14-pin SOIC (NS, SOP)
Product Type: Quad general-purpose operational amplifier
Amplifier Count: 4 independent amplifiers
İle Karşılaştır LM324KANSR →

LM324ANSR

✅ Yerleştirme
Texas Instruments
📦 SOIC-14
Quad general-purpose operational amplifier · 4 independent sections · 14-SO · Surface mount · Single supply or dual supply · 0.8 mA typical · Includes ground · Internal frequency compensation

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM324KNSR

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Texas Instruments
📦 SOIC-14
4 independent amplifiers · Quad general-purpose operational amplifier · 30 V · Single or split supply · 1.2 MHz · 2 kV · 0 °C to 70 °C · 14-pin SOIC (NS, SOP)

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM324BNSR

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 SOIC-14
B-version family member with a 3 V to 36 V stated supply range and 14-SO footprint; gain-bandwidth and output-current differences require direct comparison

📋 Katalogda Olmayan Referans Alternatifi

LM324KDR

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Texas Instruments
📦 SOIC-14
Quad general-purpose operational amplifier · 4 circuits · 30 V · 3 V to 32 V · ±1.5 V to ±16 V · 1.2 MHz · 2 kV · 60 mA

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LMC660HA

✅ Yerleştirme
📦 SOIC-14
Described as pin-for-pin compatible with LM324 and provides greater bandwidth than the 1.2 MHz LM324KANSR; bandwidth, bias, and output-swing differences require review

📋 Katalogda Olmayan Referans Alternatifi

LM324KANSR Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Count 4 circuits
Gain-Bandwidth Product 1.2 MHz
Product Type General-purpose operational amplifier
Number of Channels 4 channels
Paket 14-SO, 0.209 inch (5.30 mm) width
Pin Sayısı 14 pins
Montaj Türü Surface mount
RoHS Compliance Unknown
REACH Compliance Unknown
AEC-Q100 Qualification Not applicable

LM324KANSR Pin Yapısı

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Pin 1 OUT1 — Output of amplifier 1
Pin 2 IN1- — Inverting input of amplifier 1
Pin 3 IN1+ — Non-inverting input of amplifier 1
Pin 4 V- — Negative supply connection
Pin 5 IN2+ — Non-inverting input of amplifier 2
Pin 6 IN2- — Inverting input of amplifier 2
Pin 7 OUT2 — Output of amplifier 2
Pin 8 OUT3 — Output of amplifier 3
Pin 9 IN3- — Inverting input of amplifier 3
Pin 10 IN3+ — Non-inverting input of amplifier 3
Pin 11 V+ — Positive supply connection
Pin 12 IN4+ — Non-inverting input of amplifier 4
Pin 13 IN4- — Inverting input of amplifier 4
Pin 14 OUT4 — Output of amplifier 4

Tipik Uygulamalar

LM324KANSR için uygundur 6 uygulamas: Industrial Sensor Signal Conditioning, Low-Frequency Active Filtering, Audio and Instrumentation Buffering, Control-System Error Amplifier, Transducer Interface and Gain Stage, General Analog Interface Consolidation.

🏭

Industrial Sensor Signal Conditioning

The LM324KANSR fits industrial sensor-conditioning blocks that require several low-frequency amplification channels in one package. Its four independent, frequency-compensated amplifiers can handle related functions such as sensor buffering, gain stages, offset conditioning, and active filtering. The 1.2 MHz gain-bandwidth product is suitable for signals well below that limit, while four channels reduce board-area requirements compared with separate single amplifiers. For industrial use, confirm the device's specified temperature range, input common-mode limits, offset voltage, and output swing against the sensor output. Place the device away from high-current switching paths, provide local supply decoupling, and route high-impedance input traces away from switching nodes.

🔧

Low-Frequency Active Filtering

The LM324KANSR is appropriate for first- and second-order active-filter stages operating well below its 1.2 MHz gain-bandwidth product. Its four amplifier sections allow a filter and auxiliary buffering or gain functions to share one package. Internal frequency compensation simplifies many closed-loop filter configurations, but component tolerances, loaded Q, and noise can affect accuracy. Calculate each resistor and capacitor value for the intended closed-loop gain and frequency, then verify stability and output swing in the manufacturer's application guidance. Keeping the active network close to the amplifier pins reduces parasitic effects, while separating sensitive filter inputs from digital and power-conversion traces helps preserve signal integrity.

🎧

Audio and Instrumentation Buffering

The LM324KANSR can provide inexpensive buffering for low-level audio or instrumentation paths when the design does not require low-noise precision amplifiers or rail-to-rail output swing. Each channel can isolate a high-impedance source from a downstream load, preserving the signal while reducing loading effects. The 1.2 MHz gain-bandwidth product covers audio-band and many measurement-control applications, but distortion, output current, slew behavior, and input bias current must be checked at the operating amplitude and load. Place the buffer close to the driven input, use a low-noise ground reference, and avoid sharing high-current return paths with the signal ground when the source impedance is high.

⚡

Control-System Error Amplifier

The LM324KANSR is suitable for low-bandwidth control loops where error amplification, summation, and auxiliary signal conditioning are required. One channel can compare a feedback voltage with a reference, while other channels can condition the command or drive a monitor within their output-current limits. Its 1.2 MHz gain-bandwidth product provides more bandwidth than many slow plant-control loops, but excessive loop gain can cause oscillation. Check the noise gain, feedback topology, compensation strategy, source impedance, and output saturation limits in the Texas Instruments application guidance. Keep the feedback path compact and use a quiet reference node to reduce coupled noise and unexpected loop behavior.

📡

Transducer Interface and Gain Stage

The LM324KANSR can support transducer interfaces that require modest gain and several related signal channels. A typical arrangement can use one channel for input amplification, another for reference or offset handling, a third for filtering, and the fourth for output buffering. This consolidation is practical when the transducer bandwidth is far below 1.2 MHz and the circuit can operate within the amplifier's input and output common-mode limits. Verify bias-current error against the transducer's source impedance and confirm that the selected K suffix temperature grade covers the operating environment. Use guarding or careful grounding for high-impedance sources, and place protection networks close to the connector without compromising the specified input limits.

🧩

General Analog Interface Consolidation

The LM324KANSR helps consolidate four independent general-purpose analog functions into one 14-SO package. Possible channels include a comparator with hysteresis, a summing amplifier, a unity-gain buffer, and a voltage follower. Consolidation reduces the number of packages and can simplify supply distribution, but every channel still needs independent stability and signal-range analysis. Comparator use requires suitable positive feedback for hysteresis, while follower and amplifier channels require load-current and output-swing checks. Verify that each unused or partially used channel is configured safely and that supply decoupling meets the requirements shown in the Texas Instruments datasheet.

What is the LM324KANSR?
The LM324KANSR is a Texas Instruments four-circuit general-purpose operational amplifier in a 14-SO package. According to the Texas Instruments LM324KANSR datasheet, it provides four independent, frequency-compensated amplifier sections and a 1.2 MHz gain-bandwidth product. It is suitable for general signal conditioning, control, buffering, filtering, and instrumentation applications rather than high-speed or precision-only signal paths.
What are the key specifications of LM324KANSR that engineers should know?
The LM324KANSR combines four independent operational amplifiers, a 1.2 MHz gain-bandwidth product, and a 14-SO surface-mount package in one device. Texas Instruments classifies it as a standard general-purpose amplifier. These characteristics support multiple low-frequency analog channels in one package, while the 1.2 MHz bandwidth sets the practical ceiling for closed-loop bandwidth and should be checked against the gain and stability requirements of each stage.
Where can I download the LM324KANSR datasheet PDF?
The LM324KANSR datasheet is available through the Texas Instruments document listed on this page, with a manufacturer-document mirror also provided in the source links. Use the pin-description table, recommended operating conditions, electrical characteristics, and application guidance from that document before assigning PCB connections. The 14-SO pin order and each amplifier's input or output function must be verified directly before layout release.
Where can I find the LM324KANSR pinout?
The LM324KANSR pinout is defined by its 14-SO package and can be confirmed in the Texas Instruments datasheet pin-description table. The device contains four amplifier channels with two input terminals, one output terminal, and shared supply connections distributed across the 14 pins. When creating a new layout, follow the manufacturer numbering rather than relying on a generic SOIC drawing, because connector orientation and exposed-pad details must also match the selected outline.
What is the LM324KANSR vs LM324ANSR difference?
The principal ordering difference between LM324KANSR and LM324ANSR is the device suffix, while both are shown as 14-SO, four-circuit, 1.2 MHz general-purpose amplifier devices. The comparison listing identifies consistent terminals and package characteristics. Check the ordering table for temperature-grade and lead-finish differences, and confirm that the replacement satisfies the original design's temperature range and qualification requirements.
When should I choose LM324KANSR over another LM324 variant?
Choose the LM324KANSR when the design requires a four-channel general-purpose amplifier in the 14-SO package and its specified temperature grade and orderable configuration match the application. It is appropriate for conventional low-frequency conditioning and buffering. Select another qualified variant when its temperature rating, supply limits, accuracy, ESD capability, or package construction better matches the circuit; a matching footprint alone does not prove equivalent operation.
Is LM324KANSR suitable for sensor signal conditioning?
Yes, LM324KANSR is suitable for many low-frequency sensor-conditioning applications because it integrates four independent, frequency-compensated amplifiers in one package. Its 1.2 MHz gain-bandwidth product is adequate for modest-gain signal paths, but sensor bandwidth, input offset, bias current, common-mode range, and noise must be evaluated against the required accuracy. Use one channel per signal and provide filtering appropriate to the sensor.
What is the best drop-in replacement for LM324KANSR?
The strongest drop-in candidates are devices with the same 14-SO footprint, four amplifier channels, and comparable gain-bandwidth performance. LM324ANSR is specifically described as having consistent terminals and package characteristics, while LMC660HA is described as pin-for-pin compatible with LM324. For either choice, verify supply range, common-mode limits, offset voltage, bias current, output swing, temperature grade, and ESD requirements before approving a substitution.
Can LMC660HA replace LM324KANSR?
LMC660HA can be considered for designs that require a pin-for-pin LM324 replacement, and the available compatibility information explicitly identifies it as pin-for-pin compatible with LM324. Its rail-to-rail characteristics and higher bandwidth differ from the LM324KANSR, so existing bias points, output swing, noise expectations, and stability behavior may change. Use the LMC660HA datasheet to validate every operating condition rather than assuming identical performance.
What is the best Analog Devices equivalent for LM324KANSR?
The available cross-reference information identifies Analog Devices among manufacturers associated with LM324 replacements, but it does not establish one uniquely verified 14-SO drop-in MPN. Consequently, no specific Analog Devices part should be treated as a direct substitute without a manufacturer pinout and electrical-characteristics comparison. Search the Texas Instruments cross-reference tool or request a quote for an engineering review of the exact replacement requirements.
Where to buy LM324KANSR online?
Use the Request a Quote form on this page to request LM324KANSR availability, exact suffix confirmation, and a formal quotation. The part is identified as a Texas Instruments 14-SO, four-circuit, 1.2 MHz general-purpose operational amplifier. Because purchasing channels may represent different inventory conditions or order codes, include the full LM324KANSR MPN and required quantity in the request to avoid accidental substitution of a different grade or package.
What is the price of LM324KANSR?
Current pricing for LM324KANSR should be obtained through the Request a Quote form on this page. The form allows the exact MPN, quantity, and delivery requirements to be reviewed together, which is important for a legacy order code with a specific package and suffix. Do not substitute a generic LM324 quotation, because package, temperature grade, and reel or tube configuration can change the commercial outcome.
What is the lead time for LM324KANSR?
The current lead time for LM324KANSR should be confirmed through the Request a Quote form on this page. Lead time can vary with the exact order code, manufacturing source, quantity, and packaging arrangement. Include the intended delivery date and annual usage forecast in the request so supply planning is based on the quantity you actually need rather than a generic component lead-time estimate.
Is LM324KANSR in stock?
LM324KANSR inventory is a time-sensitive condition and should be confirmed through the Request a Quote form on this page. A distributor listing for the exact MPN reports an in-stock quantity, but availability can change rapidly and may not represent the quantity or configuration required by your project. Provide the required quantity, date code preference, and packaging request when seeking a current supply confirmation.
Can one LM324KANSR package replace four separate amplifiers?
Yes, the LM324KANSR contains four independent operational amplifiers, allowing one 14-SO package to replace four separate single amplifier packages when the required electrical characteristics match. The four channels share supply connections but otherwise operate independently. Verify each channel's feedback network, input and output connections, common-mode limits, and stability requirements because device-level consolidation does not guarantee that every original single-amplifier circuit is directly interchangeable.

Mühendislik referans verileri: LM324KANSR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose LM324KANSR when maintaining a legacy 14-SO four-amplifier design that depends on the K suffix, approximately 1.2 MHz gain-bandwidth performance, and conventional LM324 behavior. LM324ANSR is a close same-package option when its A temperature grade satisfies the operating environment. LM324KNSR and LM324KDR belong to the same core family, while LM324BNSR is appropriate when an improved B-version supply specification is beneficial and the electrical changes have been reviewed. LMC660HA should be considered only when its pin-for-pin compatibility is useful and its higher bandwidth, bias behavior, noise, and output swing are acceptable. In every case, verify the exact supply range, common-mode limits, stability, output current, and temperature grade rather than selecting solely from the package outline.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün LM324ANSR LM324KNSR LM324BNSR LM324KDR LMC660HA
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SOIC-14 SOIC-14 SOIC-14 SOIC-14 SOIC-14 SOIC-14
Pin Compatibility 14-SO standard LM324 pinout Consistent terminals and package Same LM324 14-SO family pinout Same LM324 14-SO family pinout Same LM324 14-SO family pinout Pin-for-pin compatible with LM324

Ana Farklılayıcılar

  • Four independent channels in one standard general-purpose package (karşılaştırma:LM324ANSR)
  • Maintains the established LM324 14-SO footprint (karşılaştırma:LMC660HA)
  • Single-package consolidation of four general-purpose analog functions (karşılaştırma:LM2902KNSR)
  • Order-code continuity for legacy temperature-grade designs (karşılaştırma:LM324BNSR)

Tasarım Notları

Assign the PCB footprint from the exact 14-SO ordering information and cross-check it against the manufacturer pin-description table. Keep the device orientation consistent with pin 1 marking, and place input, feedback, and bypass connections close to their associated pins. For high-impedance inputs, minimize exposed trace length and avoid routing beneath or beside switching nodes. If a revision changes among LM324 family order codes, verify the pinout and exposed thermal-pad requirement rather than assuming that every 14-pin amplifier has an identical footprint.

Confirm the exact LM324KANSR supply limits, input common-mode range, and output swing in the Texas Instruments datasheet before selecting the system rails. The 1.2 MHz gain-bandwidth rating does not establish acceptable common-mode behavior at every supply voltage. Use the recommended bypass capacitance and place it beside the supply pins with a short, low-inductance return path. Check output-current demand for every buffered load and ensure the regulator has adequate headroom for the worst-case load and temperature.

Do not assume that a 14-SO amplifier with a similar quad-channel description is electrically interchangeable. Check offset voltage, input bias current, unity-gain stability, output swing, slew rate, noise, supply limits, and temperature grade against the original circuit. A component marked as pin-for-pin compatible can still alter bias points or transient behavior. For legacy LM324 boards, measure the operating voltages and signal amplitudes first, then compare the selected replacement with the manufacturer characterization data.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact LM324KANSR order code. The device is a general-purpose amplifier rather than an AEC-Q100-qualified automotive part.

Veri doğrulanma tarihi: 2026-11-17 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

LM324KANSR datasheet LM324KANSR pinout LM324KANSR datasheet pdf Texas Instruments LM324KANSR LM324KANSR 1.2MHz quad op amp LM324KANSR SOIC-14 footprint LM324KANSR equivalent LM324KANSR replacement LM324KANSR vs LM324ANSR LM324KANSR price LM324KANSR stock LM324KANSR sensor amplifier

İlgili Bileşenler ve Terimler

Texas Instruments LM324KANSR LM324ANSR LM324KNSR LM324BNSR LM324KDR LMC660HA LM2902KNSR operational amplifier op amp quad operational amplifier linear amplifier amplifier IC analog signal conditioning gain-bandwidth product frequency compensation SOIC-14 14-SO package surface-mount package single-supply operation split-supply operation active filter transducer interface RoHS REACH
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle