LM324KANSR - 1.2MHz Quad Op Amp | Texas Instruments
부품 번호: LM324KANSR ✓ 활성LM324KANSR 개요
An operational amplifier, commonly abbreviated op amp, is a high-gain differential amplifier. Within the broader semiconductor hierarchy, an op amp belongs to the linear amplifier family, which sits within amplifier ICs and analog signal-processing devices. LM324-type amplifiers are valued for straightforward operation from single or split supplies, broad input-voltage flexibility, and low cost. The LM324KANSR is specifically identified as a 14-SO device.
The four-amplifier configuration allows one package to serve several independent signal paths. Its 1.2 MHz gain-bandwidth product supports general-purpose feedback networks, instrumentation-style buffering, comparators with suitable hysteresis, differential summing circuits, and low-frequency active-filter stages. Because the amplifiers are frequency compensated, many common closed-loop configurations do not require external compensation components.
Each circuit operates independently, allowing four unrelated signals to be processed simultaneously while sharing one package and supply connection. The 14-pin arrangement provides four amplifier sections, supply pins, and input or output connections for every channel. Its standard general-purpose classification supports broad industrial, instrumentation, control, audio, and interface applications where moderate bandwidth and precision are sufficient.
Typical uses include sensor-signal conditioning, low-level signal amplification, active filtering, control-loop support, transducer interfacing, and general analog conditioning. Because the four channels operate independently, a single device can implement a sensor amplifier, output buffer, active filter section, and auxiliary gain stage when the required accuracy and bandwidth meet the application requirements.
When assigning PCB tracks, use the pin-description table in the Texas Instruments datasheet and preserve the pin order associated with the 14-SO outline. Decouple the supply pins with the capacitance and placement required by the datasheet, and verify input and output common-mode limits for every operating condition. Stable feedback-network values and proper grounding are important because the 1.2 MHz bandwidth limits high-frequency gain and stability margin.
This page combines the exact LM324KANSR ordering information, package details, sourcing guidance, drop-in replacement analysis, and practical design guidance to support faster component selection, PCB implementation, and legacy-design maintenance.
드롭인 대체품: LM324KANSR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LM324KANSR (동일 폼 팩터 및 풋프린트) — 차이점: Package, Product Type, Amplifier Count, Number of Channels, Supply Configuration.
LM324ANSR
✅ 드롭인가격 문의
데이터시트 보기 →LM324KNSR
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →LM324BNSR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
LM324KDR
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →LMC660HA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LM324KANSR 최대 정격 & 전기적 특성
| Amplifier Count | 4 circuits |
| Gain-Bandwidth Product | 1.2 MHz |
| Product Type | General-purpose operational amplifier |
| Number of Channels | 4 channels |
| 패키지 | 14-SO, 0.209 inch (5.30 mm) width |
| 핀 수 | 14 pins |
| 실장 유형 | Surface mount |
| RoHS Compliance | Unknown |
| REACH Compliance | Unknown |
| AEC-Q100 Qualification | Not applicable |
LM324KANSR 핀 구성
| 핀 1 | OUT1 — Output of amplifier 1 |
| 핀 2 | IN1- — Inverting input of amplifier 1 |
| 핀 3 | IN1+ — Non-inverting input of amplifier 1 |
| 핀 4 | V- — Negative supply connection |
| 핀 5 | IN2+ — Non-inverting input of amplifier 2 |
| 핀 6 | IN2- — Inverting input of amplifier 2 |
| 핀 7 | OUT2 — Output of amplifier 2 |
| 핀 8 | OUT3 — Output of amplifier 3 |
| 핀 9 | IN3- — Inverting input of amplifier 3 |
| 핀 10 | IN3+ — Non-inverting input of amplifier 3 |
| 핀 11 | V+ — Positive supply connection |
| 핀 12 | IN4+ — Non-inverting input of amplifier 4 |
| 핀 13 | IN4- — Inverting input of amplifier 4 |
| 핀 14 | OUT4 — Output of amplifier 4 |
일반적인 애플리케이션
LM324KANSR 적합 용도: 6 애플리케이션s: Industrial Sensor Signal Conditioning, Low-Frequency Active Filtering, Audio and Instrumentation Buffering, Control-System Error Amplifier, Transducer Interface and Gain Stage, General Analog Interface Consolidation.
Industrial Sensor Signal Conditioning
The LM324KANSR fits industrial sensor-conditioning blocks that require several low-frequency amplification channels in one package. Its four independent, frequency-compensated amplifiers can handle related functions such as sensor buffering, gain stages, offset conditioning, and active filtering. The 1.2 MHz gain-bandwidth product is suitable for signals well below that limit, while four channels reduce board-area requirements compared with separate single amplifiers. For industrial use, confirm the device's specified temperature range, input common-mode limits, offset voltage, and output swing against the sensor output. Place the device away from high-current switching paths, provide local supply decoupling, and route high-impedance input traces away from switching nodes.
추천
Low-Frequency Active Filtering
The LM324KANSR is appropriate for first- and second-order active-filter stages operating well below its 1.2 MHz gain-bandwidth product. Its four amplifier sections allow a filter and auxiliary buffering or gain functions to share one package. Internal frequency compensation simplifies many closed-loop filter configurations, but component tolerances, loaded Q, and noise can affect accuracy. Calculate each resistor and capacitor value for the intended closed-loop gain and frequency, then verify stability and output swing in the manufacturer's application guidance. Keeping the active network close to the amplifier pins reduces parasitic effects, while separating sensitive filter inputs from digital and power-conversion traces helps preserve signal integrity.
추천
Audio and Instrumentation Buffering
The LM324KANSR can provide inexpensive buffering for low-level audio or instrumentation paths when the design does not require low-noise precision amplifiers or rail-to-rail output swing. Each channel can isolate a high-impedance source from a downstream load, preserving the signal while reducing loading effects. The 1.2 MHz gain-bandwidth product covers audio-band and many measurement-control applications, but distortion, output current, slew behavior, and input bias current must be checked at the operating amplitude and load. Place the buffer close to the driven input, use a low-noise ground reference, and avoid sharing high-current return paths with the signal ground when the source impedance is high.
추천
Control-System Error Amplifier
The LM324KANSR is suitable for low-bandwidth control loops where error amplification, summation, and auxiliary signal conditioning are required. One channel can compare a feedback voltage with a reference, while other channels can condition the command or drive a monitor within their output-current limits. Its 1.2 MHz gain-bandwidth product provides more bandwidth than many slow plant-control loops, but excessive loop gain can cause oscillation. Check the noise gain, feedback topology, compensation strategy, source impedance, and output saturation limits in the Texas Instruments application guidance. Keep the feedback path compact and use a quiet reference node to reduce coupled noise and unexpected loop behavior.
추천
Transducer Interface and Gain Stage
The LM324KANSR can support transducer interfaces that require modest gain and several related signal channels. A typical arrangement can use one channel for input amplification, another for reference or offset handling, a third for filtering, and the fourth for output buffering. This consolidation is practical when the transducer bandwidth is far below 1.2 MHz and the circuit can operate within the amplifier's input and output common-mode limits. Verify bias-current error against the transducer's source impedance and confirm that the selected K suffix temperature grade covers the operating environment. Use guarding or careful grounding for high-impedance sources, and place protection networks close to the connector without compromising the specified input limits.
추천
General Analog Interface Consolidation
The LM324KANSR helps consolidate four independent general-purpose analog functions into one 14-SO package. Possible channels include a comparator with hysteresis, a summing amplifier, a unity-gain buffer, and a voltage follower. Consolidation reduces the number of packages and can simplify supply distribution, but every channel still needs independent stability and signal-range analysis. Comparator use requires suitable positive feedback for hysteresis, while follower and amplifier channels require load-current and output-swing checks. Verify that each unused or partially used channel is configured safely and that supply decoupling meets the requirements shown in the Texas Instruments datasheet.
추천
추천 제품 요약
엔지니어링 참조 데이터: LM324KANSR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LM324ANSR | LM324KNSR | LM324BNSR | LM324KDR | LMC660HA |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SOIC-14 | SOIC-14 | SOIC-14 | SOIC-14 | SOIC-14 | SOIC-14 |
| Pin Compatibility | 14-SO standard LM324 pinout | Consistent terminals and package | Same LM324 14-SO family pinout | Same LM324 14-SO family pinout | Same LM324 14-SO family pinout | Pin-for-pin compatible with LM324 |
주요 차별점
- Four independent channels in one standard general-purpose package (vs LM324ANSR)
- Maintains the established LM324 14-SO footprint (vs LMC660HA)
- Single-package consolidation of four general-purpose analog functions (vs LM2902KNSR)
- Order-code continuity for legacy temperature-grade designs (vs LM324BNSR)
설계 노트
Assign the PCB footprint from the exact 14-SO ordering information and cross-check it against the manufacturer pin-description table. Keep the device orientation consistent with pin 1 marking, and place input, feedback, and bypass connections close to their associated pins. For high-impedance inputs, minimize exposed trace length and avoid routing beneath or beside switching nodes. If a revision changes among LM324 family order codes, verify the pinout and exposed thermal-pad requirement rather than assuming that every 14-pin amplifier has an identical footprint.
Confirm the exact LM324KANSR supply limits, input common-mode range, and output swing in the Texas Instruments datasheet before selecting the system rails. The 1.2 MHz gain-bandwidth rating does not establish acceptable common-mode behavior at every supply voltage. Use the recommended bypass capacitance and place it beside the supply pins with a short, low-inductance return path. Check output-current demand for every buffered load and ensure the regulator has adequate headroom for the worst-case load and temperature.
Do not assume that a 14-SO amplifier with a similar quad-channel description is electrically interchangeable. Check offset voltage, input bias current, unity-gain stability, output swing, slew rate, noise, supply limits, and temperature grade against the original circuit. A component marked as pin-for-pin compatible can still alter bias points or transient behavior. For legacy LM324 boards, measure the operating voltages and signal amplitudes first, then compare the selected replacement with the manufacturer characterization data.
규정 준수 정보
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact LM324KANSR order code. The device is a general-purpose amplifier rather than an AEC-Q100-qualified automotive part.