Texas Instruments

LM339AMX - Quad Low-Offset Voltage Comparator SOIC-14 | Texas Instruments

MPN: LM339AMX ✓ Aktif
2 V to 36 V Vdss 800 uA Id 14-SOIC (0.154 in, 3.90 mm width) Package
MOQ: 1 |

LM339AMX Genel Bakış

The Texas Instruments LM339AMX is a low-power, low-offset-voltage quad differential comparator with four independent open-collector output comparators housed in a 14-pin SOIC (3.90 mm width) surface-mount package. It operates from a single supply of 2 V to 36 V or dual supplies of ±1 V to ±18 V, and the common-mode input voltage range extends to include ground.

A differential comparator is a mixed-signal building block that compares two input voltages and drives its output to indicate which is higher. Comparators sit within the broader amplifier and analog IC hierarchy, alongside operational amplifiers, but are optimized for fast switching and saturated logic-level outputs rather than linear operation. Because the LM339A family includes ground in its common-mode range, it can sense signals near zero volts on a single rail.

Key features include four independent comparators in one package, wide single-supply operation from 2 V to 36 V (or ±18 V dual), low typical supply current drain of about 800 uA, and outputs compatible with TTL, DTL, MOS, and CMOS logic. The open-collector output stage allows wired-OR connections and level shifting to arbitrary logic voltages via a pull-up resistor. Low input offset voltage and operation with the input common-mode range including ground make the device suitable for near-ground sensing.

Technically, the open-collector output transistors saturate at a low voltage, giving clean logic-level transitions and easy interfacing. A typical response time of approximately 1.3 us suits threshold detection, level translation, and oscillator circuits rather than ultra-high-speed applications.

Typical applications include limit comparators, simple analog-to-digital converters, pulse generators, square-wave and relaxation oscillators, window detectors, and voltage monitoring in industrial and consumer systems.

For design, remember that every output requires an external pull-up resistor since the output stage is open-collector, and inputs must be kept within the common-mode range even beyond the supply voltage specified in the absolute maximum ratings for differential input.

This page adds value beyond the manufacturer datasheet by synthesizing distributor sourcing information, drop-in alternatives, comparison tables, and practical design notes in one place.

Drop-in alternatifler için LM339AMX — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller LM339AMX (aynı form faktörü ve ayağa oturma) — farklı olan Package, Output Type, Comparator Type, Logic Compatibility, Number of Comparators.

ON Semiconductor
Package: 14-pin SOIC
Number of Comparators: 4 channels
İle Karşılaştır LM339AMX →
Texas Instruments
Package: 14-SOIC (D), 3.90 mm width
Output Type: Open-collector
Comparator Type: Precision, general-purpose
Texas Instruments
Package: SOIC-14
Output Type: Open-Collector
Comparator Type: General Purpose
İle Karşılaştır LM339AMX →
Texas Instruments
Package: 14-pin SOIC (D)
Output Type: Open collector
Comparator Type: Standard general-purpose differential comparator

LM339AMX/NOPB

✅ Yerleştirme
Texas Instruments
📦 SOIC-14
4 comparators · Precision, general-purpose · 2 V to 36 V · Approximately ±1 V to ±18 V · Open-collector · 1.3 µs · As low as 2 mV maximum for all four comparators · 800 µA typical

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM339DR

✅ Yerleştirme
Texas Instruments
📦 SOIC-14
4 (Quad) · General Purpose · Open-Collector · 2 V to 36 V · ±1 V to ±18 V · 5 mV · 25 nA · 5 nA

✓ Stokta

$0.0738 / Birim

Veri Şablonunu Görüntüle →

LM339ADR2

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
ON Semiconductor
📦 SOIC-14
Quad differential comparator · 4 channels · Single supply · 18 V/36 V · 14-pin SOIC · Tape and reel · Surface mount

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM339M/NOPB

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Texas Instruments
📦 SOIC-14
Standard general-purpose differential comparator · 4 channels · Open collector · TTL, MOS, and CMOS compatible · 14-pin SOIC (D) · 14 pins · 0°C to 70°C

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM339AMX/NOPB

✅ Yerleştirme
Texas Instruments
📦 SOIC-14 (14-SOP)
4 comparators · Precision, general-purpose · 2 V to 36 V · Approximately ±1 V to ±18 V · Open-collector · 1.3 µs · As low as 2 mV maximum for all four comparators · 800 µA typical

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM339AMX Maksimum Değerlendirmeler & Elektriksel Özellikler

Fonksiyon Quad differential comparator
Number of Comparators 4
Çıkış Türü Open-Collector (DTL, TTL, MOS, CMOS compatible)
Supply Voltage Range (Single) 2 V to 36 V
Supply Voltage Range (Dual) ±1 V to ±18 V
Supply Current (Typical) 800 uA
Common-Mode Input Voltage Range Includes ground
Response Time (Typical) 1.3 us
Output Saturation Voltage Low output saturation voltage (per TI product page)
Paket 14-SOIC (0.154 in, 3.90 mm width)
İşletim Sıcaklığı Aralığı 0 C to 70 C
Montaj Türü Surface Mount
Packaging Tape & Reel (T/R)
Series LM339A (A version)

LM339AMX Pin Yapısı

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Pin 1 OUT2 — Output of comparator 2 (open-collector, requires pull-up)
Pin 2 OUT1 — Output of comparator 1 (open-collector, requires pull-up)
Pin 3 VCC — Positive supply, 2 V to 36 V (or ±1 V to ±18 V dual)
Pin 4 IN1- — Inverting input of comparator 1
Pin 5 IN1+ — Non-inverting input of comparator 1
Pin 6 IN2- — Inverting input of comparator 2
Pin 7 IN2+ — Non-inverting input of comparator 2
Pin 8 IN3- — Inverting input of comparator 3
Pin 9 IN3+ — Non-inverting input of comparator 3
Pin 10 IN4- — Inverting input of comparator 4
Pin 11 IN4+ — Non-inverting input of comparator 4
Pin 12 GND — Ground / negative supply
Pin 13 OUT4 — Output of comparator 4 (open-collector, requires pull-up)
Pin 14 OUT3 — Output of comparator 3 (open-collector, requires pull-up)

Tipik Uygulamalar

LM339AMX için uygundur 6 uygulamas: Limit Comparators and Window Detectors, Battery and Supply Voltage Monitoring, Relaxation Oscillators and Pulse Generators, Simple Analog-to-Digital Converters, Sensor Threshold Detection in Industrial Control, Level Shifting and Logic Interfacing.

🔧

Limit Comparators and Window Detectors

The LM339AMX is a classic choice for limit comparators and window detector circuits that flag whether a voltage is inside or outside a defined band. Its common-mode input range includes ground, so it senses near-zero signals directly on a single 5 V or 12 V rail without level shifting, and the 2 V to 36 V supply range covers automotive-style 12 V and industrial 24 V monitoring rails. Two of the four comparators form a standard window detector: one flags above the upper reference, the other below the lower reference, and their open-collector outputs wire-OR into a single fault line through one pull-up resistor. The low output saturation voltage keeps the fault logic level clean for TTL or CMOS inputs, and the 1.3 us typical response time is far faster than the slow-moving thresholds typical of supply supervision.

⚡

Battery and Supply Voltage Monitoring

Battery undervoltage alarms and supply supervision circuits benefit directly from the LM339AMX. With a typical supply current drain of only about 800 uA across a 2 V to 36 V range, the device adds minimal load to a battery being monitored, and it remains in specification down to 2 V, close to the discharge floor of single-cell and lead-acid systems. A resistor divider scales the battery voltage into the comparator input while a TL431 or zener-derived reference sets the threshold; the open-collector output drives an LED or a microcontroller interrupt line through a pull-up. The A-grade offset specification of the LM339AMX tightens the guaranteed trip-point accuracy compared with standard LM339 versions, which matters when the alarm threshold must not drift over the commercial 0 C to 70 C range.

🎧

Relaxation Oscillators and Pulse Generators

The LM339AMX builds reliable relaxation oscillators, square-wave generators, and pulse generators using one comparator, a timing capacitor, and a resistor network with hysteresis. Because the output is open-collector with a low saturation voltage, the square-wave output swings cleanly to the pull-up rail and interfaces to TTL, MOS, or CMOS timing chains without a level shifter. The typical 1.3 us response time limits the practical upper frequency to roughly the low hundreds of kilohertz, which is ideal for clock sources, LED flashers, tone generators, and switched-capacitor clocking in industrial and consumer products. Operating from a single 5 V to 15 V rail with ground-sensing inputs simplifies single-supply design, and the remaining three comparators in the package can implement threshold detection or a second oscillator channel at no extra package cost.

👊

Simple Analog-to-Digital Converters

Flash-type and integrating analog-to-digital converters built from discrete parts use banks of comparators, and the LM339AMX provides four open-collector comparators per package for this purpose. In a simple parallel (flash) converter, a resistor ladder generates equally spaced reference voltages and each comparator compares the input against one tap; the open-collector outputs feed a priority encoder or microcontroller GPIO port. The ground-inclusive common-mode range lets the ladder span from 0 V upward on a single supply, and the 2 V to 36 V supply range supports ladders up to 36 V for wide-dynamic-range inputs. The A-grade offset specification of the LM339AMX reduces the code-width error near each threshold compared with the standard LM339DR, improving effective resolution in low-bit-count converters.

🏭

Sensor Threshold Detection in Industrial Control

Industrial control panels use the LM339AMX to convert analog sensor outputs, such as thermistor dividers, photocells, and pressure-sensor bridges, into clean logic-level flags. Each of the four comparators monitors one sensor channel against a reference set by a potentiometer or TL431, so a single SOIC-14 package supervises four independent trip points with minimal board area. The 2 V to 36 V single-supply range matches standard 24 V industrial logic rails, the low 800 uA supply current suits remotely powered nodes, and hysteresis added with a small positive-feedback resistor prevents chatter on slowly moving sensor signals. Open-collector outputs allow the flags to be wire-ORed onto a shared alarm line pulled up to a different logic voltage, simplifying interface to PLC inputs.

🌐

Level Shifting and Logic Interfacing

The open-collector output of the LM339AMX doubles as a simple level translator between analog domains and logic families. Because the output collector is uncommitted, the pull-up resistor can connect to 3.3 V, 5 V, or any rail up to the rated output limit, letting a comparator sensing a 24 V industrial signal deliver a clean 3.3 V logic flag to a microcontroller. Outputs are TTL, DTL, MOS, and CMOS compatible per the TI datasheet, and multiple outputs may be tied together for wired-OR fault busses. The ground-inclusive common-mode input range allows comparison of signals that swing close to 0 V, which is common when monitoring current-sense resistors referenced to ground. Adding a few millivolts of hysteresis via positive feedback gives noise immunity on resistive sensor signals.

Önerilen Ürünler Özeti

TL431 Precision shunt reference for the detector threshold Kullanıldığı Yer: Limit Comparators and Window Detectors, Battery and Supply Voltage Monitoring, Relaxation Oscillators and Pulse Generators, Sensor Threshold Detection in Industrial Control LM336 Reference voltage source for window limits Kullanıldığı Yer: Limit Comparators and Window Detectors, Sensor Threshold Detection in Industrial Control TLV431 Low-current shunt reference option Kullanıldığı Yer: Battery and Supply Voltage Monitoring NE555 Alternative single-timer IC for comparison designs Kullanıldığı Yer: Relaxation Oscillators and Pulse Generators CD40147 10-line to 4-line priority encoder for flash ADC Kullanıldığı Yer: Simple Analog-to-Digital Converters SN74HC148 8-line priority encoder option Kullanıldığı Yer: Simple Analog-to-Digital Converters SN74LVC1G17 Schmitt-trigger buffer after comparator output Kullanıldığı Yer: Level Shifting and Logic Interfacing INA199 Current-sense amplifier feeding comparator input Kullanıldığı Yer: Level Shifting and Logic Interfacing
What is the supply voltage range of the LM339AMX?
The LM339AMX operates from a single supply of 2 V to 36 V or from dual supplies of ±1 V to ±18 V. According to the Texas Instruments LM339A family datasheet, the supply current drain is approximately 800 uA typical, independent of supply voltage, which makes the device well suited for battery-powered and low-power threshold-detection circuits.
What is the LM339AMX output type and why does it matter?
The LM339AMX uses open-collector outputs on all four comparators. Because the output is an uncommitted collector transistor, each output must be connected to a positive supply through an external pull-up resistor. This lets one device interface to TTL, DTL, MOS, or CMOS logic at any pull-up voltage up to the rated limit, and multiple outputs can be tied together for wired-OR logic as described in the TI datasheet.
What is the difference between LM339AMX and LM339AMX/NOPB?
Electrically, the LM339AMX and LM339AMX/NOPB are the same device from Texas Instruments: both are quad low-offset comparators in a 14-SOIC package. The /NOPB suffix simply indicates a no-Pb (lead-free, RoHS-compliant) manufacturing version. Functionally and pin-for-pin they are interchangeable, so a board designed for either ordering code accepts the other without redesign.
What is the difference between LM339AMX and LM339DR?
The LM339AMX is the A-grade version in a 14-SOIC (3.90 mm) package, while the LM339DR is the standard (non-A) LM339 in the same SOIC-14 footprint. Both are pin-to-pin quad comparators with open-collector outputs and the same supply range; the A version carries tighter guaranteed offset and offset-drift specifications. According to third-party comparison services such as FindIC and ETEI, the two share the same pinout, making the LM339DR a drop-in candidate where relaxed precision limits are acceptable.
Can the onsemi LM339AMX replace the Texas Instruments LM339AMX?
Yes. onsemi offers an LM339AMX in a 14-SOP package that is listed alongside the TI part on distributor sites such as DigiKey. Both devices are quad open-collector comparators operating from 2 V to 36 V, and the onsemi LM339AMX is pin-compatible in the same 14-lead small-outline footprint. Before qualifying the cross-brand substitute in production, verify the offset-voltage and response-time limits against your circuit requirements in the onsemi datasheet.
When should I choose the LM339AMX over the LM339DR?
Choose the LM339AMX when your application needs the tighter guaranteed input offset voltage and offset temperature drift of the A-grade specification, for example in precision threshold detection or battery-level monitoring. Choose the standard LM339DR for general-purpose limit comparators and oscillators where the relaxed offset limits have no system impact and unit cost is the priority. Both parts share the identical SOIC-14 footprint, so switching between them later requires no PCB change.
Is the LM339AMX suitable for oscillator circuits?
Yes. The LM339AMX is well suited to relaxation oscillators, square-wave generators, and pulse generators. Its open-collector output saturates at a low voltage and its wide 2 V to 36 V supply range plus ground-sensing common-mode input simplify single-rail designs. With a typical response time of about 1.3 us, the device comfortably supports oscillators in the kilohertz to low-hundreds-of-kilohertz range, as shown in the typical application section of the TI LM339 datasheet.
What is the best drop-in replacement for LM339AMX?
The best drop-in replacement for the LM339AMX is the Texas Instruments LM339AMX/NOPB, which is the same die in the same 14-SOIC package with only a lead-free ordering-code difference. The TI LM339DR is a second same-footprint option with relaxed (non-A grade) offset limits. Cross-brand, the onsemi LM339AMX in a 14-SOP is pin-compatible. All three mount on the same SOIC-14 land pattern without PCB modification.
Where can I download the LM339AMX datasheet PDF?
The LM339AMX datasheet PDF is available from the Texas Instruments LM339 family product page at ti.com, which is the authoritative source for specifications, typical applications, and absolute maximum ratings. Mirror copies of the 28-page PDF are also indexed on datasheet aggregator sites. For design work, always work from the current TI document to ensure you have the latest revision and temperature-grade tables.
What is the operating temperature range of the LM339AMX?
The LM339AMX is specified for commercial operation from 0 C to 70 C, as listed on distributor product pages such as Mouser. If your design must operate across the full industrial temperature range of -40 C to +125 C, select a family member such as the LM239A or LM2901A instead, which carry extended temperature grades in the same SOIC-14 footprint.
Does the LM339AMX need pull-up resistors on its outputs?
Yes, every LM339AMX output requires an external pull-up resistor because the output stage is an uncommitted open-collector transistor. Without a pull-up, the output cannot reach a defined high level. Typical pull-up values range from a few kilohms to about 100 kilohms depending on speed and power trade-offs; lower values give faster rising edges but consume more current when the output is low. Refer to the TI datasheet application section for guidance.
Where is the LM339AMX used in typical applications?
The LM339AMX is used in limit comparators, window detectors, simple analog-to-digital converters, pulse and square-wave generators, voltage-level monitoring, and industrial control threshold sensing. Its common-mode input range that includes ground lets it sense near-zero signals directly on a single supply, and the four comparators in one package reduce board area and BOM line items in multi-channel monitoring circuits.
Where can I buy LM339AMX and what is its lead time?
You can request a quote for the LM339AMX through the Request a Quote form on this page, which returns price, stock, and lead time for your required quantity. The part is packaged in tape and reel form for surface-mount assembly. The manufacturer lists the device as active, so standard production lead times apply; submit your quantity on the quote form for the current committed schedule.
Is the LM339AMX the same as the LM2901?
No, the LM339AMX is not identical to the LM2901, although both are quad open-collector comparators. The LM2901 family is qualified for extended industrial/automotive temperature ranges and carries somewhat different guaranteed limits, while the LM339A grade targets the commercial 0 C to 70 C range with A-grade offset specifications. Texas Instruments notes on its LM339 product page that the B-version is a drop-in replacement for LM239, LM339, and LM2901, but always compare datasheet limits before substituting.
What are the key specifications of the LM339AMX engineers should know?
The LM339AMX is a quad differential comparator in a 14-SOIC (3.90 mm) package operating from 2 V to 36 V single or ±1 V to ±18 V dual supply, with about 800 uA typical supply current, open-collector TTL/DTL/MOS/CMOS-compatible outputs, a common-mode input range including ground, low output saturation voltage, and approximately 1.3 us typical response time, rated 0 C to 70 C in tape-and-reel packaging.

Mühendislik referans verileri: LM339AMX — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the LM339AMX when you need four commercial-grade (0 C to 70 C) comparators with tighter A-grade offset specifications in a standard SOIC-14 footprint, such as precision battery monitors, window detectors, or multi-channel sensor threshold circuits. Choose the LM339AMX/NOPB if your BOM requires an explicit lead-free ordering code; it is electrically identical. Choose the standard LM339DR when offset precision has no system impact and cost is the priority - it shares the exact same footprint. Choose the onsemi LM339AMX as a cross-brand second-source for supply-chain resilience, after verifying offset and response-time limits against the onsemi datasheet. For extended -40 C to +125 C operation, move to the LM239A or LM2901A family members rather than any LM339 grade. All SOIC-14 options listed here mount on the same land pattern, so footprint-level redesign is never required.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün LM339AMX/NOPB LM339DR LM339ADR LM339AMX (onsemi)
Package SOIC-14 (3.90 mm) SOIC-14 - same SOIC-14 - same SOIC-14 - same SOIC-14 (14-SOP) - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments onsemi
Number of Comparators 4 4 4 4 4
Supply Voltage (Single) 2 V to 36 V 2 V to 36 V 2 V to 36 V 2 V to 36 V 2 V to 36 V
Output Type Open-collector Open-collector Open-collector Open-collector Open-collector

Ana Farklılayıcılar

  • A-grade precision at standard-family price (karşılaştırma:LM339DR)
  • Ground-inclusive common-mode range (karşılaştırma:LM339AMX (onsemi))
  • Single-package four-channel density (karşılaştırma:LM393 series dual comparators)

Tasarım Notları

Every LM339AMX output is an uncommitted open-collector transistor and cannot reach a defined high level without an external pull-up resistor to a positive rail. Omitting the pull-up is the most common first-design error with this family. Choose the pull-up value by trading speed against power: 3.3 kilohm to 10 kilohm gives fast rising edges into TTL/CMOS loads, while values up to 100 kilohm reduce current in slow threshold-detection circuits. Outputs may be paralleled for wired-OR logic, but total sink current per output must stay within datasheet limits.

Add hysteresis when comparing slowly moving or noisy signals. A resistor from output to the non-inverting input, sized against the input divider impedance, creates typically 10 mV to 50 mV of hysteresis and eliminates output chatter near the threshold. Without hysteresis, the 1.3 us response time allows the output to toggle repeatedly on millivolt-level noise. Keep the HYS resistor values large enough that the added loading does not shift the divider threshold, and verify the resulting trip points at the 0 C and 70 C range limits.

Place a 100 nF ceramic decoupling capacitor directly across the VCC (pin 3) and GND (pin 12) pins of the LM339AMX, as close to the package as possible. Input divider resistors should be placed so their Thevenin impedance is low enough that input bias currents do not shift the threshold materially. Because the A version is chosen for offset precision, avoid routing high-current or switching nodes near the input traces; a ground keepout under the inputs preserves the low-offset advantage the A grade was selected for.

Estimated: at a 5 V single supply, the LM339AMX draws about 800 uA typical supply current (about 4 mW), plus pull-up current when outputs are low. With 10 kilohm pull-ups on four outputs all sinking at once, each output sinks roughly 0.5 mA, adding about 10 mW dissipated mostly in the pull-ups. Total dissipation remains far below the SOIC-14 thermal capability, so no heatsinking is required; the thermal concern in this family is negligible compared with output sink-current limits.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The /NOPB variant denotes a lead-free (no-Pb) version; compliance details for LM339AMX specifically should be confirmed on the TI product page before release.

Veri doğrulanma tarihi: 2026-11-08 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

lm339amx datasheet lm339amx nopb lm339amx pinout lm339amx equivalent lm339amx vs lm339dr lm339amx replacement Texas Instruments lm339amx lm339amx price lm339amx stock quad comparator soic-14 lm339amx lm339amx application circuit lm339amx open collector pull-up

İlgili Bileşenler ve Terimler

Texas Instruments LM339AMX LM339AMX/NOPB LM339DR onsemi LM339AMX quad differential comparator voltage comparator open-collector output low offset voltage SOIC-14 small outline package surface mount TTL / DTL / MOS / CMOS compatibility wired-OR logic common-mode input range including ground RoHS limit comparator window detector relaxation oscillator threshold detection
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle