NXP Semiconductors

LPC2292FET144/01 - 60MHz ARM7 MCU, 256KB Flash | NXP

MPN: LPC2292FET144/01 ✓ Aktif
1.65 V to 3.6 V Vdss 144-TFBGA, 12 mm x 12 mm Package 60 MHz Speed 256 KB Memory
MOQ: 1 |

LPC2292FET144/01 Genel Bakış

The NXP LPC2292FET144/01 is a 16/32-bit ARM7TDMI-S microcontroller with a 60 MHz maximum clock frequency, 256 KB of embedded flash memory, 16 KB of RAM, and a 144-TFBGA package measuring 12 mm by 12 mm. It also provides two CAN controllers, a 10-bit ADC, and an external memory interface, making it suitable for embedded networking, industrial control, and communications equipment.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The LPC2292 belongs to the ARM7 embedded-control hierarchy: ARM7TDMI-S CPU core, 32-bit microcontroller, embedded system controller, and general-purpose semiconductor. Its bus-oriented architecture and extensive peripheral set allow one device to supervise communications, analog measurement, and external storage or memory-intensive operations.

The LPC2292FET144/01 combines a 128-bit-wide memory interface with a unique accelerator architecture that enables 32-bit code execution at the maximum clock rate. Its 256 KB ISP/IAP flash supports in-system and in-application programming, while real-time emulation and embedded trace features assist firmware development and diagnostics. Two CAN controllers are useful for industrial networking, vehicle electronics, and embedded systems requiring reliable multi-controller communication.

The 10-bit ADC provides analog measurement capability without requiring a separate converter, and the external memory interface expands the design options available when an application needs additional memory or peripheral devices. These interfaces complement the 60 MHz processor and make the LPC2292 suitable for control systems that combine communications, data acquisition, and external signal processing in one compact package.

Typical uses include industrial controllers, CAN-connected equipment, building automation, embedded gateways, and data-acquisition systems. The 144-TFBGA package supports compact designs but requires careful PCB layout and inspection because its fine-pitch ball grid has limited soldering visibility. Firmware development can use the processor's real-time emulation and embedded trace capabilities to reduce the complexity of board bring-up and runtime analysis.

Careful power, decoupling, clock, and memory-interface design is essential for reliable operation. Place the required supply capacitors close to their associated pins, route high-current and sensitive signals appropriately, and follow the NXP datasheet's recommended PCB and pin-configuration guidance. The /00 and /01 device variants use an identical pin configuration, which simplifies board-level planning across those revisions.

This product page consolidates the principal NXP device characteristics, practical integration guidance, exact-source availability information, and a focused comparison with compatible LPC2200-family devices. It also highlights where revision-specific ordering codes and detailed package pin descriptions must be checked in the manufacturer datasheet before a new PCB is released for production.

Drop-in alternatifler için LPC2292FET144/01 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

LPC2292FET144/00

✅ Yerleştirme
📦 144-TFBGA (12x12)
Same 144-TFBGA pin configuration and 60 MHz architecture; revision suffix differs by 0%, so no pin-level change is identified

📋 Katalogda Olmayan Referans Alternatifi

LPC2292FET144

✅ Yerleştirme
📦 144-TFBGA (12x12)
Base ordering code for the same LPC2292 256 KB-flash device; the /01 suffix is omitted, leaving key electrical ratings unchanged

📋 Katalogda Olmayan Referans Alternatifi

LPC2294FET144

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 144-TFBGA (12x12)
Same 144-TFBGA pin configuration, but LPC2294 has a larger RAM configuration; core clock and flash capacity remain within 0%

📋 Katalogda Olmayan Referans Alternatifi

LPC2294FET144/00

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 144-TFBGA (12x12)
Same family footprint and 60 MHz architecture; differs from LPC2292 in RAM capacity and uses the /00 revision suffix

📋 Katalogda Olmayan Referans Alternatifi

LPC2294FET144/01

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 144-TFBGA (12x12)
Same family footprint, 60 MHz clock and 256 KB flash; differs from LPC2292 in RAM capacity, requiring memory-size verification

📋 Katalogda Olmayan Referans Alternatifi

LPC2292FET144/01 Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 16/32-bit ARM microcontroller
CPU Core Arm7TDMI-S
Azami Saat Hızı 60 MHz
Embedded Flash Memory 256 KB
Flash Organization 256K x 8 bits
Program Memory Type ISP/IAP flash
SRAM 16 KB
CAN Controllers 2
ADC Resolution 10 bits
External Memory Interface 1 interface
Memory Interface Width 128 bits
Operating Voltage 1.65 V to 3.6 V
Paket 144-TFBGA, 12 mm x 12 mm
Montaj Türü Surface mount
Development Support Real-time emulation and embedded trace

LPC2292FET144/01 144-tfbga, 12 mm x 12 mm Pin Yapısı Kılavuzu

LPC2292FET144/01 (144-tfbga, 12 mm x 12 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

144-tfbga, 12 mm x 12 mm paket pin çizelgesi için LPC2292FET144/01

Ayrıntılı pin çıkış verisi mevcut değil: LPC2292FET144/01.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

LPC2292FET144/01 için uygundur 6 uygulamas: CAN-Connected Industrial Controller, Building Automation and HVAC Equipment, Industrial Data-Acquisition System, Embedded Communications Gateway, Motor and Machinery Control, Programmable Test and Measurement Front End.

🏭

CAN-Connected Industrial Controller

The LPC2292FET144/01 fits an industrial controller because it combines two CAN controllers with a 60 MHz Arm7TDMI-S core and 256 KB of ISP/IAP flash. The controller can manage node communication, supervisory logic, and local I/O while retaining field-update capability through in-system or in-application programming. Its 16 KB SRAM provides working memory for protocol stacks and control tasks without requiring external RAM for moderate workloads. The 144-TFBGA package also keeps the controller compact when board area is constrained. External CAN transceivers, bus termination, surge protection, and isolation remain separate board-level requirements. Firmware should be validated for the exact LPC2292 memory map and the selected CAN clock configuration before production release.

🏭

Building Automation and HVAC Equipment

The LPC2292FET144/01 is appropriate for building-automation equipment that must coordinate sensors, actuators, and networked controllers. Its two CAN controllers can support distinct communication channels or redundant network segmentation, while the 10-bit ADC accepts basic analog measurements such as temperature, level, or pressure signals. At 60 MHz, the Arm7TDMI-S processor can execute control loops alongside communication tasks, and 256 KB of ISP/IAP flash supports local scheduling, diagnostics, and firmware maintenance. Use the external memory interface if a product line shares the controller platform with larger peripherals or data-storage requirements. Isolation, filtering, and protection must be engineered around the building wiring environment rather than assumed to be integrated into the microcontroller.

🔧

Industrial Data-Acquisition System

The LPC2292FET144/01 can serve as the supervisory processor in a compact data-acquisition system. Its 10-bit ADC provides an integrated conversion function for slow or moderate-resolution analog measurements, while the external memory interface permits connection to higher-resolution converters, data buffers, or storage devices. The 128-bit-wide memory architecture and accelerator design support efficient 32-bit execution at the 60 MHz maximum clock rate, and the 256 KB ISP/IAP flash can hold calibration tables, buffering logic, and communication routines. For high-noise environments, use careful grounding, filtering, and isolation at the analog interface. The ADC's specified accuracy and acquisition characteristics should be checked against the required sensor precision before finalizing the signal chain.

🌐

Embedded Communications Gateway

The LPC2292FET144/01 fits a communications gateway that must mediate between local serial equipment and a CAN-based network. Two integrated CAN controllers reduce the need for external protocol hardware, while the 60 MHz processor can manage protocol conversion, buffer management, and supervisory functions. Its 256 KB flash provides room for gateway configuration and firmware, and ISP/IAP support simplifies field upgrades in deployed equipment. The external memory interface can extend the design with larger buffers or dedicated storage when required. Board designers should allocate the pins for Ethernet, serial, or other gateway interfaces according to the exact datasheet table, while providing appropriate transceiver, protection, and isolation hardware for each external communication medium.

🔧

Motor and Machinery Control

The LPC2292FET144/01 can coordinate low- and medium-complexity machinery functions that require networking, analog sensing, and deterministic embedded control. The 60 MHz Arm7TDMI-S core provides computational headroom for digital commutation or supervisory loops, while the two CAN controllers enable communication with drives, remote sensors, or service diagnostics. Its 10-bit ADC can monitor feedback from basic sensors, and 256 KB of ISP/IAP flash accommodates control tables and updateable firmware. Power-stage drivers, current sensors, and safety interlocks remain external. Validate timing margins, watchdog behavior, fault handling, and regulator thermal performance because the microcontroller's integrated functions do not replace the power electronics or protection circuitry required for industrial machinery.

🔧

Programmable Test and Measurement Front End

The LPC2292FET144/01 is suitable for a programmable measurement front end when measurements must be coordinated with external instruments. The processor can control sequencing, calculate corrections, and communicate results through CAN, while the 10-bit ADC handles additional analog channels outside the primary measurement path. Its ISP/IAP flash allows calibration constants and test firmware to be updated in the field, and the external memory interface supports larger buffers, interface converters, or specialized instruments. Use the 144-TFBGA package only on a PCB designed for fine-pitch assembly and adequate thermal relief. For precision measurement, determine whether the ADC resolution and noise performance satisfy the system specification; otherwise, connect a higher-performance converter through the external interface.

What is the LPC2292FET144/01?
The LPC2292FET144/01 is an NXP 16/32-bit Arm7TDMI-S microcontroller operating up to 60 MHz, with 256 KB of ISP/IAP flash, 16 KB of RAM, two CAN controllers, and a 10-bit ADC. According to the NXP LPC2292/2294 datasheet, it uses a 128-bit-wide memory interface and a unique accelerator architecture that enables 32-bit execution at the maximum clock rate.
What are the key specifications of LPC2292FET144/01 that engineers should know?
The LPC2292FET144/01 combines a 60 MHz Arm7TDMI-S core, 256 KB of ISP/IAP flash, 16 KB of SRAM, two CAN controllers, a 10-bit ADC, and an external memory interface in a 144-TFBGA package. According to the NXP LPC2292/2294 datasheet, its 128-bit-wide memory interface and accelerator architecture support 32-bit code execution at the maximum clock frequency.
Where can I download the LPC2292FET144/01 datasheet PDF?
The official NXP LPC2292/2294 datasheet PDF is available from the manufacturer's product-document link for this device. It contains the electrical characteristics, 144-ball pin configuration, memory organization, CAN and ADC details, and PCB implementation guidance. Engineers should use the complete document when assigning balls, planning decoupling, or checking operating limits.
Where can I find the LPC2292FET144/01 pinout?
The LPC2292FET144/01 pin configuration is shown in the NXP LPC2292/2294 datasheet under the 144-TFBGA pin-configuration diagram and pin description table. The manufacturer states that the pin configuration is identical for devices with and without the /00 and /01 suffixes. Use that table when assigning power, ground, ports, clocks, and external-memory signals.
What is the difference between LPC2292FET144/01 and LPC2292FET144/00?
The LPC2292FET144/01 and LPC2292FET144/00 use the same 144-TFBGA pin configuration, according to the NXP datasheet, so their board-level connections remain compatible. The suffix identifies different device variants or ordering revisions, but the /00-to-/01 distinction does not change the physical pin arrangement. Firmware, ordering-code, and qualification requirements should still be checked for the exact assembled device.
Can LPC2294FET144 replace LPC2292FET144/01 without PCB changes?
The NXP LPC2294FET144 is a pin-compatible member of the LPC2292/2294 family, but it should not be treated as an unconditional functional replacement. The key difference is device capacity: the LPC2292 is identified as a 256 KB-flash, 16 KB-RAM part, while the LPC2294 family offers a different RAM configuration. Confirm interrupt vectors, memory sizing, peripherals, timing, and firmware assumptions before substitution.
When should I choose LPC2292FET144/01 instead of LPC2294FET144?
Choose LPC2292FET144/01 when the design requires the LPC2292 configuration of 256 KB flash and 16 KB SRAM and does not need the additional memory capacity associated with LPC2294. The family shares the 144-TFBGA footprint and pin configuration, but firmware and memory assumptions must still be verified. Select LPC2294 only when its greater memory resources are justified and required.
Is LPC2292FET144/01 suitable for CAN-based industrial control systems?
The LPC2292FET144/01 is suitable for CAN-based industrial control systems because it integrates two CAN controllers, a 60 MHz Arm7TDMI-S processor, and 16 KB of SRAM. According to the NXP datasheet, its ISP/IAP flash also supports field programming and firmware updates. External transceivers, termination, isolation, and connector protection must be designed separately.
What can replace LPC2292FET144/01?
The closest documented replacements are LPC2292FET144/00, LPC2292FET144, and LPC2294FET144-family devices because they use the same 144-TFBGA pin configuration. The /00 and /01 suffixes share identical pin arrangements, while LPC2294 changes the memory configuration. Use the Request a Quote form on this page for availability of the exact replacement MPN and verify firmware compatibility.
What is the best NXP equivalent for LPC2292FET144/01?
The best NXP family equivalent depends on whether the required configuration is revision-specific or memory-expanded. LPC2292FET144/00 is the closest suffix-related alternative because the manufacturer states that /00 and /01 pin configurations are identical. LPC2294FET144 is another family member with the same footprint, but its RAM capacity differs and may require firmware changes.
How much power supply voltage does LPC2292FET144/01 require?
The LPC2292FET144/01 operates from 1.65 V to 3.6 V. According to the NXP LPC2292/2294 datasheet, the device includes internal flash, an external memory interface, two CAN controllers, and a 10-bit ADC. Board-level power planning should account for digital and analog supply requirements, decoupling, and the voltage tolerances specified in the manufacturer datasheet.
Does LPC2292FET144/01 support real-time debugging?
The LPC2292FET144/01 supports real-time emulation and embedded trace features through its Arm7TDMI-S architecture, as stated by NXP. These facilities help developers observe execution and diagnose firmware behavior without relying solely on stop-mode debugging. The debug adapter, connector, JTAG or trace signals, and board-level test access still need to be implemented and validated.
Where can I buy LPC2292FET144/01 online?
Use the Request a Quote form on this page to request LPC2292FET144/01 pricing, current availability, and lead time. The manufacturer product page, distributor listings, and an LCSC listing identify the exact device, but purchasing conditions can change. Submit the required package suffix and quantity when requesting a quotation.
What is the price of LPC2292FET144/01?
Current LPC2292FET144/01 pricing is best obtained through the Request a Quote form on this page because quotation status and availability can change. The structured listing data supports an exact-MPN price record, but it does not provide a qualifying quantity-break table. Request the quantity and delivery schedule needed for your BOM through the quote form.
What is the lead time and stock status for LPC2292FET144/01?
Current stock and lead time for LPC2292FET144/01 should be confirmed through the Request a Quote form on this page. The exact device is listed by NXP and appears in distributor catalogs, but those listings do not guarantee immediate inventory or a fixed production lead time. Include your required quantity, date code preference, and shipment destination in the request.

Mühendislik referans verileri: LPC2292FET144/01 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose LPC2292FET144/01 when the design specifically requires NXP's LPC2292 configuration: a 60 MHz Arm7TDMI-S core, 256 KB of ISP/IAP flash, 16 KB of SRAM, two CAN controllers, and a 144-TFBGA footprint. LPC2292FET144/00 is the closest suffix-related alternative because the manufacturer confirms identical pin configurations, but the approved device revision should control the final BOM. Choose LPC2294FET144 or its /00 and /01 variants only when 64 KB of RAM is beneficial and firmware has been reviewed for the changed memory capacity. The shared package enables PCB reuse, but package identity does not remove software, qualification, or ordering-code checks. For a new design, the exact LPC2292FET144/01 is preferable when its 16 KB SRAM and specified peripheral set are sufficient; otherwise, move to the higher-memory LPC2294 configuration rather than assuming automatic software compatibility.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün LPC2292FET144/00 LPC2292FET144 LPC2294FET144 LPC2294FET144/00 LPC2294FET144/01
Package 144-TFBGA (12x12) 144-TFBGA (12x12) 144-TFBGA (12x12) 144-TFBGA (12x12) 144-TFBGA (12x12) 144-TFBGA (12x12)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
CPU Core Arm7TDMI-S Arm7TDMI-S Arm7TDMI-S Arm7TDMI-S Arm7TDMI-S Arm7TDMI-S
Maximum Clock Frequency 60 MHz 60 MHz 60 MHz 60 MHz 60 MHz 60 MHz
Embedded Flash Memory 256 KB 256 KB 256 KB 256 KB 256 KB 256 KB
SRAM 16 KB 16 KB 16 KB 64 KB 64 KB 64 KB
CAN Controllers 2 2 2 2 2 2
ADC Resolution 10 bits 10 bits 10 bits 10 bits 10 bits 10 bits
External Memory Interface 1 1 1 1 1 1

Ana Farklılayıcılar

  • Dual integrated CAN controllers support networked embedded control without two external controller devices (karşılaştırma:LPC2292FET144/00)
  • The /01 ordering variant retains the exact /00-family pin configuration (karşılaştırma:LPC2292FET144/00)
  • LPC2292 memory sizing matches the target application's 16 KB SRAM requirement (karşılaştırma:LPC2294FET144)
  • Integrated ISP/IAP flash and development features reduce external programming overhead (karşılaştırma:LPC2292FET144)

Tasarım Notları

Design the PCB land pattern directly from the 144-TFBGA pin configuration in the NXP LPC2292/2294 datasheet. The manufacturer states that /00 and /01 devices use the same pin configuration, which permits a common footprint. Preserve the datasheet-specified ball assignments and maintain assembly-process allowances for a 12 mm by 12 mm fine-pitch BGA. Because solder joints are hidden after reflow, inspect using X-ray or equivalent process-control methods.

Use the supply voltage range of 1.65 V to 3.6 V and the decoupling configuration specified by NXP. Place each required capacitor close to its associated power ball and keep high-current return paths short and continuous. Separate noisy digital return currents from sensitive analog routing where practical, and verify regulator startup, current limits, and sequencing against the complete manufacturer electrical-characteristics table.

Route the 128-bit external memory interface as a controlled-length, point-to-point bus, following the NXP recommendations for topology, trace impedance, and termination. Avoid splitting the bus into long branches and minimize vias and stub traces. The 60 MHz operating rate does not make interface timing automatic; evaluate setup and hold margins in the target system and use the datasheet timing information as the design baseline.

Do not treat LPC2294 as a transparent LPC2292 substitution solely because both use the same 144-TFBGA footprint. LPC2292 has 16 KB of RAM, whereas LPC2294 provides 64 KB, and changing RAM capacity can alter linker placement, startup assumptions, and memory-map interpretation. Likewise, check the exact /00 or /01 suffix before releasing the BOM. The most robust choice is the exact device or a revision specifically approved by the firmware and hardware teams.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The LCSC product listing identifies the device as RoHS, but no formal compliance declaration or separate AEC-Q100, REACH, lead-free, halogen-free, or conflict-minerals status was confirmed for the exact MPN.

İlgili Aramalar

LPC2292FET144/01 datasheet LPC2292FET144/01 pinout LPC2292FET144/01 datasheet pdf LPC2292FET144/01 equivalent LPC2292FET144/01 replacement LPC2292FET144/01 price LPC2292FET144/01 stock LPC2292FET144 60MHz microcontroller LPC2292FET144 144-TFBGA pinout LPC2292FET144 vs LPC2294FET144 LPC2292FET144 CAN controller application NXP LPC2292FET144/01

İlgili Bileşenler ve Terimler

NXP Semiconductors LPC2292FET144/01 LPC2292FET144/00 LPC2292FET144 LPC2294FET144 LPC2294FET144/00 LPC2294FET144/01 Arm7TDMI-S ARM7 16/32-bit microcontroller embedded microcontroller embedded system controller semiconductor ISP/IAP flash 256 KB flash memory 16 KB SRAM 64 KB SRAM CAN controller 10-bit ADC external memory interface 128-bit memory bus real-time emulation embedded trace 144-TFBGA BGA package surface-mount package
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle